Mimic the dirty log test and allow the user to pin demand paging test
tasks to physical CPUs.
Put the help message into a general helper as suggested by Sean.
Signed-off-by: Peter Xu <peterx@redhat.com>
[sean: rebase, tweak arg ordering, add "print" to helper, print program name]
Link: https://lore.kernel.org/r/20230607001226.1398889-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move some helper functions from dirty_log_perf_test.c to the memstress
library so that they can be used in a future commit which tests page
splitting during dirty logging.
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Link: https://lore.kernel.org/r/20230131181820.179033-2-bgardon@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Access the same memory addresses on each iteration of the memstress
guest code. This ensures that the state of KVM's page tables
is the same after every iteration, including the pages that host the
guest page tables for args and vcpu_args.
This difference is visible when running the proposed
dirty_log_page_splitting_test[*] on AMD, or on Intel with pml=0 and
eptad=0. The tests fail due to different semantics of dirty bits for
page-table pages on AMD (and eptad=0) and Intel. Both AMD and Intel with
eptad=0 treat page-table accesses as writes, therefore more pages are
dropped before the repopulation phase when dirty logging is disabled.
The "missing" page had been included in the population phase because it
hosts the page tables for vcpu_args, but repopulation does not need it."
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/20230412200913.1570873-1-pbonzini@redhat.com
[sean: add additional details in changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
There's one PER_VCPU_DEBUG in per-vcpu uffd threads but it's never hit.
Trigger that when quit in normal ways (kick pollfd[1]), meanwhile fix the
number of nanosec calculation.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20230427201112.2164776-3-peterx@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Don't advertisze XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
- Overhaul the AMX selftests to improve coverage and cleanup the test
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=BY10
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM selftests, and an AMX/XCR0 bugfix, for 6.4:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
- Overhaul the AMX selftests to improve coverage and cleanup the test
- Misc cleanups
* kvm-arm64/smccc-filtering:
: .
: SMCCC call filtering and forwarding to userspace, courtesy of
: Oliver Upton. From the cover letter:
:
: "The Arm SMCCC is rather prescriptive in regards to the allocation of
: SMCCC function ID ranges. Many of the hypercall ranges have an
: associated specification from Arm (FF-A, PSCI, SDEI, etc.) with some
: room for vendor-specific implementations.
:
: The ever-expanding SMCCC surface leaves a lot of work within KVM for
: providing new features. Furthermore, KVM implements its own
: vendor-specific ABI, with little room for other implementations (like
: Hyper-V, for example). Rather than cramming it all into the kernel we
: should provide a way for userspace to handle hypercalls."
: .
KVM: selftests: Fix spelling mistake "KVM_HYPERCAL_EXIT_SMC" -> "KVM_HYPERCALL_EXIT_SMC"
KVM: arm64: Test that SMC64 arch calls are reserved
KVM: arm64: Prevent userspace from handling SMC64 arch range
KVM: arm64: Expose SMC/HVC width to userspace
KVM: selftests: Add test for SMCCC filter
KVM: selftests: Add a helper for SMCCC calls with SMC instruction
KVM: arm64: Let errors from SMCCC emulation to reach userspace
KVM: arm64: Return NOT_SUPPORTED to guest for unknown PSCI version
KVM: arm64: Introduce support for userspace SMCCC filtering
KVM: arm64: Add support for KVM_EXIT_HYPERCALL
KVM: arm64: Use a maple tree to represent the SMCCC filter
KVM: arm64: Refactor hvc filtering to support different actions
KVM: arm64: Start handling SMCs from EL1
KVM: arm64: Rename SMC/HVC call handler to reflect reality
KVM: arm64: Add vm fd device attribute accessors
KVM: arm64: Add a helper to check if a VM has ran once
KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALL
Signed-off-by: Marc Zyngier <maz@kernel.org>
Take the XFeature mask in __vm_xsave_require_permission() instead of the
bit so that there's no need to define macros for both the bit and the
mask. Asserting that only a single bit is set and retrieving said bit
is easy enough via log2 helpers.
Opportunistically clean up the error message for the
ARCH_REQ_XCOMP_GUEST_PERM sanity check.
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Build a helper for doing SMCs in selftests by macro-izing the current
HVC implementation and taking the conduit instruction as an argument.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-13-oliver.upton@linux.dev
Bits [51:48] of the pgd address are stored at bits [5:2] of ttbr0_el1.
page_table_test stores its page tables at the far end of IPA space so
was tripping over this when run on a system that supports FEAT_LPA (or
FEAT_LPA2).
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230308110948.1820163-4-ryan.roberts@arm.com
The high bits [51:48] of a physical address should appear at [15:12] in
a 64K pte, not at [51:48] as was previously being programmed. Fix this
with new helper functions that do the conversion correctly. This also
sets us up nicely for adding LPA2 encodings in future.
Fixes: 7a6629ef74 ("kvm: selftests: add virt mem support for aarch64")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230308110948.1820163-3-ryan.roberts@arm.com
There is a 'malloc' call in vcpu_save_state function, which can
be unsuccessful. This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230322144528.704077-1-ivan.orlov0322@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Align the guest stack to match calling sequence requirements in
section "The Stack Frame" of the System V ABI AMD64 Architecture
Processor Supplement, which requires the value (%rsp + 8), NOT %rsp,
to be a multiple of 16 when control is transferred to the function
entry point. I.e. in a normal function call, %rsp needs to be 16-byte
aligned _before_ CALL, not after.
This fixes unexpected #GPs in guest code when the compiler uses SSE
instructions, e.g. to initialize memory, as many SSE instructions
require memory operands (including those on the stack) to be
16-byte-aligned.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20230227180601.104318-1-ackerleytng@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper function for reading kvm boolean module parameters values.
No functional change intended.
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230214084920.59787-2-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add and use a macro to generate the KVM exit reason strings array
instead of relying on developers to correctly copy+paste+edit each
string.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204014547.583711-4-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make TEST_ASSERT_KVM_EXIT_REASON() macro and replace all exit reason
test assert statements with it.
No functional changes intended.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20230204014547.583711-2-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the guts of kvm_hypercall() to a macro so that Xen hypercalls,
which have a different register ABI, can reuse the VMCALL vs. VMMCALL
logic.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, if KVM memory stress tests are run with hugetlb sources but hugetlb is
not available (either in the kernel or because /proc/sys/vm/nr_hugepages is 0)
the test will fail with a memory allocation error.
This makes it impossible to add tests that default to hugetlb-backed memory,
because on a machine with a default configuration they will fail. Therefore,
check HugePages_Total as well and, if zero, direct the user to enable hugepages
in procfs. Furthermore, return KSFT_SKIP whenever hugetlb is not available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct
hypercall instruction instead of relying on KVM to patch in VMMCALL
- A variety of one-off cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=KI7X
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.3' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.3:
- Cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct
hypercall instruction instead of relying on KVM to patch in VMMCALL
- A variety of one-off cleanups and fixes
The KVM_GUEST_PAGE_TABLE_MIN_PADDR macro has been defined in
include/kvm_util_base.h. So remove the duplicate definition in
lib/kvm_util.c.
Fixes: cce0c23dd9 ("KVM: selftests: Add wrapper to allocate page table page")
Signed-off-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20230208071801.68620-1-shahuang@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The parameter arg in guest_modes_cmdline not being used now, and the
optarg should be replaced with arg in guest_modes_cmdline.
And this is the chance to change strtoul() to atoi_non_negative(), since
guest mode ID will never be negative.
Signed-off-by: Shaoqin Huang <shahuang@redhat.com>
Fixes: e42ac777d6 ("KVM: selftests: Factor out guest mode code")
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/20230202025716.216323-1-shahuang@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Hyper-V extended hypercalls by default exit to userspace. Verify
userspace gets the call, update the result and then verify in guest
correct result is received.
Add KVM_EXIT_HYPERV to list of "known" hypercalls so errors generate
pretty strings.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221212183720.4062037-14-vipinsh@google.com
[sean: add KVM_EXIT_HYPERV to exit_reasons_known]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the host CPU's native hypercall instruction, i.e. VMCALL vs. VMMCALL,
in kvm_hypercall(), as relying on KVM to patch in the native hypercall on
a #UD for the "wrong" hypercall requires KVM_X86_QUIRK_FIX_HYPERCALL_INSN
to be enabled and flat out doesn't work if guest memory is encrypted with
a private key, e.g. for SEV VMs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20230111004445.416840-4-vannapurve@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Cache the host CPU vendor for userspace and share it with guest code.
All the current callers of this_cpu* actually care about host cpu so
they are updated to check host_cpu_is*.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20230111004445.416840-3-vannapurve@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace is_intel/amd_cpu helpers with this_cpu_* helpers to better
convey the intent of querying vendor of the current cpu.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20230111004445.416840-2-vannapurve@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
kvm_vm_elf_load() and elfhdr_get() open one file each, but they
never close the opened file descriptor. If a test repeatedly
creates and destroys a VM with __vm_create(), which
(directly or indirectly) calls those two functions, the test
might end up getting a open failure with EMFILE.
Fix those two functions to close the file descriptor.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221220170921.2499209-2-reijiw@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The loop marks vaddr as mapped after incrementing it by page size,
thereby marking the *next* page as mapped. Set the bit in vpages_mapped
first instead.
Fixes: 56fc773203 ("KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221209015307.1781352-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the ucall MMIO hole is placed immediately after slot0, which
is a relatively safe address in the PA space. However, it is possible
that the same address has already been used for something else (like the
guest program image) in the VA space. At least in my own testing,
building the vgic_irq test with clang leads to the MMIO hole appearing
underneath gicv3_ops.
Stop identity mapping the MMIO hole and instead find an unused VA to map
to it. Yet another subtle detail of the KVM selftests library is that
virt_pg_map() does not update vm->vpages_mapped. Switch over to
virt_map() instead to guarantee that the chosen VA isn't to something
else.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221209015307.1781352-6-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explain the meaning of the bit manipulations of vm_vaddr_populate_bitmap.
These correspond to the "canonical addresses" of x86 and other
architectures, but that is not obvious.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a magic value to signal a ucall_alloc() failure instead of simply
doing GUEST_ASSERT(). GUEST_ASSERT() relies on ucall_alloc() and so a
failure puts the guest into an infinite loop.
Use -1 as the magic value, as a real ucall struct should never wrap.
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a == vs. = typo in kvm_get_cpu_address_width() that results in
@pa_bits being left unset if the CPU doesn't support enumerating its
MAX_PHY_ADDR. Flagged by clang's unusued-value warning.
lib/x86_64/processor.c:1034:51: warning: expression result unused [-Wunused-value]
*pa_bits == kvm_cpu_has(X86_FEATURE_PAE) ? 36 : 32;
Fixes: 3bd396353d ("KVM: selftests: Add X86_FEATURE_PAE and use it calc "fallback" MAXPHYADDR")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213001653.3852042-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 Xen-for-KVM:
* Allow the Xen runstate information to cross a page boundary
* Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
* add support for 32-bit guests in SCHEDOP_poll
x86 fixes:
* One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
* Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
* Clean up the MSR filter docs.
* Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
* Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
* Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
* Advertise (on AMD) that the SMM_CTL MSR is not supported
* Remove unnecessary exports
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
Documentation:
* Remove deleted ioctls from documentation
* Various fixes
MEM_REGION_TEST_DATA is meant to hold data explicitly used by a
selftest, not implicit allocations due to the selftests infrastructure.
Allocate the ucall pool from MEM_REGION_DATA much like the rest of the
selftests library allocations.
Fixes: 426729b2cf ("KVM: selftests: Add ucall pool based implementation")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221207214809.489070-5-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An interesting feature of the Arm architecture is that the stage-1 MMU
supports two distinct VA regions, controlled by TTBR{0,1}_EL1. As KVM
selftests on arm64 only uses TTBR0_EL1, the VA space is constrained to
[0, 2^(va_bits-1)). This is different from other architectures that
allow for addressing low and high regions of the VA space from a single
page table.
KVM selftests' VA space allocator presumes the valid address range is
split between low and high memory based the MSB, which of course is a
poor match for arm64's TTBR0 region.
Allow architectures to override the default VA space layout. Make use of
the override to align vpages_valid with the behavior of TTBR0 on arm64.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221207214809.489070-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
-----BEGIN PGP SIGNATURE-----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=iIPT
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
* kvm-arm64/dirty-ring:
: .
: Add support for the "per-vcpu dirty-ring tracking with a bitmap
: and sprinkles on top", courtesy of Gavin Shan.
:
: This branch drags the kvmarm-fixes-6.1-3 tag which was already
: merged in 6.1-rc4 so that the branch is in a working state.
: .
KVM: Push dirty information unconditionally to backup bitmap
KVM: selftests: Automate choosing dirty ring size in dirty_log_test
KVM: selftests: Clear dirty ring states between two modes in dirty_log_test
KVM: selftests: Use host page size to map ring buffer in dirty_log_test
KVM: arm64: Enable ring-based dirty memory tracking
KVM: Support dirty ring in conjunction with bitmap
KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h
KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/access-tracking:
: .
: Small series to add support for arm64 to access_tracking_perf_test and
: correct a couple bugs along the way.
:
: Patches courtesy of Oliver Upton.
: .
KVM: selftests: Build access_tracking_perf_test for arm64
KVM: selftests: Have perf_test_util signal when to stop vCPUs
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/s2-faults:
: .
: New KVM/arm64 selftests exercising various sorts of S2 faults, courtesy
: of Ricardo Koller. From the cover letter:
:
: "This series adds a new aarch64 selftest for testing stage 2 fault handling
: for various combinations of guest accesses (e.g., write, S1PTW), backing
: sources (e.g., anon), and types of faults (e.g., read on hugetlbfs with a
: hole, write on a readonly memslot). Each test tries a different combination
: and then checks that the access results in the right behavior (e.g., uffd
: faults with the right address and write/read flag). [...]"
: .
KVM: selftests: aarch64: Add mix of tests into page_fault_test
KVM: selftests: aarch64: Add readonly memslot tests into page_fault_test
KVM: selftests: aarch64: Add dirty logging tests into page_fault_test
KVM: selftests: aarch64: Add userfaultfd tests into page_fault_test
KVM: selftests: aarch64: Add aarch64/page_fault_test
KVM: selftests: Use the right memslot for code, page-tables, and data allocations
KVM: selftests: Fix alignment in virt_arch_pgd_alloc() and vm_vaddr_alloc()
KVM: selftests: Add vm->memslots[] and enum kvm_mem_region_type
KVM: selftests: Stash backing_src_type in struct userspace_mem_region
tools: Copy bitfield.h from the kernel sources
KVM: selftests: aarch64: Construct DEFAULT_MAIR_EL1 using sysreg.h macros
KVM: selftests: Add missing close and munmap in __vm_mem_region_delete()
KVM: selftests: aarch64: Add virt_get_pte_hva() library function
KVM: selftests: Add a userfaultfd library
Signed-off-by: Marc Zyngier <maz@kernel.org>
Drop the "atomic_" prefix from tools' atomic_test_and_set_bit() to
match the kernel nomenclature where test_and_set_bit() is atomic,
and __test_and_set_bit() provides the non-atomic variant.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disallow using kvm_get_supported_cpuid() and thus caching KVM's supported
CPUID info before enabling XSAVE-managed features that are off-by-default
and must be enabled by ARCH_REQ_XCOMP_GUEST_PERM. Caching the supported
CPUID before all XSAVE features are enabled can result in false negatives
due to testing features that were cached before they were enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-4-seanjc@google.com
Move __vm_xsave_require_permission() below the CPUID helpers so that a
future change can reference the cached result of KVM_GET_SUPPORTED_CPUID
while keeping the definition of the variable close to its intended user,
kvm_get_supported_cpuid().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-3-seanjc@google.com
Move the kvm_cpu_has() check on X86_FEATURE_XFD out of the helper to
enable off-by-default XSAVE-managed features and into the one test that
currenty requires XFD (XFeature Disable) support. kvm_cpu_has() uses
kvm_get_supported_cpuid() and thus caches KVM_GET_SUPPORTED_CPUID, and so
using kvm_cpu_has() before ARCH_REQ_XCOMP_GUEST_PERM effectively results
in the test caching stale values, e.g. subsequent checks on AMX_TILE will
get false negatives.
Although off-by-default features are nonsensical without XFD, checking
for XFD virtualization prior to enabling such features isn't strictly
required.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Fixes: 7fbb653e01 ("KVM: selftests: Check KVM's supported CPUID, not host CPUID, for XFD")
Link: https://lore.kernel.org/r/20221125023839.315207-1-lei4.wang@intel.com
[sean: add Fixes, reword changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-2-seanjc@google.com
Signal that a test run is complete through perf_test_args instead of
having tests open code a similar solution. Ensure that the field resets
to false at the beginning of a test run as the structure is reused
between test runs, eliminating a couple of bugs:
access_tracking_perf_test hangs indefinitely on a subsequent test run,
as 'done' remains true. The bug doesn't amount to much right now, as x86
supports a single guest mode. However, this is a precondition of
enabling the test for other architectures with >1 guest mode, like
arm64.
memslot_modification_stress_test has the exact opposite problem, where
subsequent test runs complete immediately as 'run_vcpus' remains false.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[oliver: added commit message, preserve spin_wait_for_next_iteration()]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118211503.4049023-2-oliver.upton@linux.dev
There's no need to pollute VMX and SVM code with Hyper-V specific
stuff and allocate Hyper-V specific test pages for all test as only
few really need them. Create a dedicated struct and an allocation
helper.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-43-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to putting Hyper-V specific test pages to a dedicated
struct, move eVMCS load logic from load_vmcs(). Tests call load_vmcs()
directly and the only one which needs 'enlightened' version is
evmcs_test so there's not much gain in having this merged.
Temporary pass both GPA and HVA to load_evmcs().
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-42-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V VP assist page is not eVMCS specific, it is also used for
enlightened nSVM. Move the code to vendor neutral place.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-41-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, tests can only request a new vaddr range by using
vm_vaddr_alloc()/vm_vaddr_alloc_page()/vm_vaddr_alloc_pages() but
these functions allocate and map physical pages too. Make it possible
to request unmapped range too.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-36-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
