The test on MIPS stopped working after I upgraded some of my toolchains
to use the ones from kernel.org because the mips toolchain defaults to
big endian, even though it supports both endians. Let's just add an
explicit -EL to make sure it always succeeds like the kernel does.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Right now skipped and failed test counts are not reported, and a few
times already we missed skipped ones that ought not to. Let's now
count each category and continue to invite the user to check the
report file when skipped+fail > 0. E.g:
$ make run-user
(...)
CC nolibc-test
136 test(s) passed, 2 skipped, 0 failed. See all results in .../run.out
Note that it's important to be careful about the trailing \r on the qemu
output (thanks Zhangjin for noticing).
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
These 2 test cases are added to cover the normal using scenes of
gettimeofday().
They have been used to trigger and fix up such issue with nolibc:
nolibc-test.c:(.text.gettimeofday+0x54): undefined reference to `__aeabi_ldivmod'
This issue happens while there is no "unsigned int" conversion in the
coming new clock_gettime / clock_gettime64 syscall path of
gettimeofday():
tv->tv_usec = ts.tv_nsec / 1000;
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/280867a8-7601-4a96-9b85-87668e1f1282@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the clock_gettime / clock_gettime64 syscalls based gettimeofday(),
there is no way to let kernel space 'fixup' the invalid data pointer of
'struct timeval' and 'struct timezone' for us for we need to read
timespec from kernel space and then convert to timeval in user-space
ourselves and also we need to simply ignore and reset timezone in
user-space.
Without this removal, the invalid (void *)1 address will trigger a
sigsegv (signum = 11) signal and stop the whole test.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/linux-riscv/20230528113325.GJ1956@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Some functions may be implemented with different syscalls in different
platforms, these syscalls may set different errnos for the same
arguments, let's support such cases.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/linux-riscv/20230528113325.GJ1956@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
nolibc now has INT_MAX in stdint.h, so, don't mix INT_MAX and
__INT_MAX__, unify them to INT_MAX.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When compile nolibc-test.c with 2.31 glibc, we got such error:
In file included from /usr/riscv64-linux-gnu/include/sys/cdefs.h:452,
from /usr/riscv64-linux-gnu/include/features.h:461,
from /usr/riscv64-linux-gnu/include/bits/libc-header-start.h:33,
from /usr/riscv64-linux-gnu/include/limits.h:26,
from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/limits.h:194,
from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/syslimits.h:7,
from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/limits.h:34,
from /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/nolibc-test.c:6:
/usr/riscv64-linux-gnu/include/bits/wordsize.h:28:3: error: #error "rv32i-based targets are not supported"
28 | # error "rv32i-based targets are not supported"
Glibc (>= 2.33) commit 5b6113d62efa ("RISC-V: Support the 32-bit ABI
implementation") fixed up above error.
As suggested by Thomas, defining INT_MIN/INT_MAX for nolibc can remove
the including of limits.h, and therefore no above error. of course, the
other libcs still require limits.h, move it to the right place.
The LONG_MIN/LONG_MAX are also defined too.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/09d60dc2-e298-4c22-8e2f-8375861bd9be@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Compiling nolibc-test.c with gcc on x86_64 got such warning:
tools/testing/selftests/nolibc/nolibc-test.c: In function ‘expect_eq’:
tools/testing/selftests/nolibc/nolibc-test.c:177:24: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 2 has type ‘uint64_t’ {aka ‘long unsigned int’} [-Wformat=]
177 | llen += printf(" = %lld ", expr);
| ~~~^ ~~~~
| | |
| | uint64_t {aka long unsigned int}
| long long int
| %ld
It because that glibc defines uint64_t as "unsigned long int" when word
size (means sizeof(long)) is 64bit (see include/bits/types.h), but
nolibc directly use the 64bit "unsigned long long" (see
tools/include/nolibc/stdint.h), which is simpler, seems kernel uses it
too (include/uapi/asm-generic/int-ll64.h).
use a simple conversion to solve it.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/linux-riscv/20230529130449.GA2813@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The opensbi package from Ubuntu 20.04 only provides rv64 firmwares:
$ dpkg -S opensbi | grep -E "fw_.*bin|fw_.*elf" | uniq
opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_dynamic.bin
opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.bin
opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_dynamic.elf
opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf
To run this nolibc test for rv32, users must build opensbi or download a
prebuilt one from qemu repository:
https://gitlab.com/qemu-project/qemu/-/blob/master/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin
And then use -bios to tell qemu use it to avoid such failure:
$ qemu-system-riscv32 -display none -no-reboot -kernel /path/to/arch/riscv/boot/Image -serial stdio -M virt -append "console=ttyS0 panic=-1"
qemu-system-riscv32: Unable to load the RISC-V firmware "opensbi-riscv32-generic-fw_dynamic.bin"
To run from makefile, QEMU_ARGS_EXTRA is added to allow pass extra
arguments like -bios:
$ make run QEMU_ARGS_EXTRA="-bios /path/to/opensbi-riscv32-generic-fw_dynamic.bin" ...
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/2ab94136-d341-4a26-964e-6d6c32e66c9b@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
gettimeofday() is not guaranteed by posix to handle a NULL value as first
argument gracefully.
On glibc for example it crashes. (When not going through the vdso)
Link: https://lore.kernel.org/lkml/96f1134d-ce6e-4d82-ae00-1cd4038809c4@t-8ch.de/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On 32bit platforms size_t is not enough to represent [u]int_fast64_t.
Fixes: 3e9fd4e9a1 ("tools/nolibc: add integer types and integer limit macros")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
running nolibc-test with glibc on x86_64 got such print issue:
29 execve_root = -1 EACCES [OK]
30 fork30 fork = 0 [OK]
31 getdents64_root = 712 [OK]
The fork test case has three printf calls:
(1) llen += printf("%d %s", test, #name);
(2) llen += printf(" = %d %s ", expr, errorname(errno));
(3) llen += pad_spc(llen, 64, "[FAIL]\n"); --> vfprintf()
In the following scene, the above issue happens:
(a) The parent calls (1)
(b) The parent calls fork()
(c) The child runs and shares the print buffer of (1)
(d) The child exits, flushs the print buffer and closes its own stdout/stderr
* "30 fork" is printed at the first time.
(e) The parent calls (2) and (3), with "\n" in (3), it flushs the whole buffer
* "30 fork = 0 ..." is printed
Therefore, there are two "30 fork" in the stdout.
Between (a) and (b), if flush the stdout (and the sterr), the child in
stage (c) will not be able to 'see' the print buffer.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There were two exactly similar occurrences of this test.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
EOVERFLOW will be used in the coming time64 syscalls support.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Keep backwards compatibility through unions.
The compatibility macros like
#define st_atime st_atim.tv_sec
as documented in stat(3type) don't work for nolibc because it would
break with other stat-like structures that contain the field st_atime.
The stx_atime, stx_mtime, stx_ctime are in type of 'struct
statx_timestamp', which is incompatible with 'struct timespec', should
be converted explicitly.
/* include/uapi/linux/stat.h */
struct statx_timestamp {
__s64 tv_sec;
__u32 tv_nsec;
__s32 __reserved;
};
/* include/uapi/linux/time.h */
struct timespec {
__kernel_old_time_t tv_sec; /* seconds */
long tv_nsec; /* nanoseconds */
};
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/3a3edd48-1ace-4c89-89e8-9c594dd1b3c9@t-8ch.de/
Co-authored-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
[wt: squashed Zhangjin & Thomas' patches into one to preserve "bisectability"]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The child process forked during stackprotector tests intentionally gets
killed with SIGABRT. By default this will trigger writing a coredump.
The writing of the coredump can spam the systems coredump machinery and
take some time.
Timings for the full run of nolibc-test:
Before: 200ms
After: 20ms
This is on a desktop x86 system with systemd-coredumpd enabled.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It will be used to disable core dumps from the child spawned to validate
the stack protector functionality.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that nolibc enable stackprotector support automatically when the
compiler enables it we only have to get the -fstack-protector flags
correct.
The cc-options are structured so that -fstack-protector-all is only
enabled if -mstack-protector=guard works, as that is the only mode
supported by nolibc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The stackprotector support in nolibc should be enabled iff it is also
enabled in the compiler.
Use the preprocessor defines added by gcc and clang if stackprotector
support is enable to automatically do so in nolibc.
This completely removes the need for any user-visible API.
To avoid inlining the lengthy preprocessor check into every user
introduce a new header compiler.h that abstracts the logic away.
As the define NOLIBC_STACKPROTECTOR is now not user-relevant anymore
prefix it with an underscore.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230520133237.GA27501@1wt.eu/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Previously each space character used for alignment during test execution
was written in a single write() call.
This would make the output from strace fairly unreadable.
Coalesce all spaces into a single call to write().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Compiling nolibc-test.c for rv32 got such error:
tools/testing/selftests/nolibc/nolibc-test.c:599:57: error: ‘__NR_fstat’ undeclared (first use in this function)
599 | CASE_TEST(syscall_args); EXPECT_SYSER(1, syscall(__NR_fstat, 0, NULL), -1, EFAULT); break;
The generic include/uapi/asm-generic/unistd.h used by rv32 doesn't
support __NR_fstat, use the more generic __NR_statx instead:
Running test 'syscall'
69 syscall_noargs = 1 [OK]
70 syscall_args = -1 EFAULT [OK]
__NR_statx has been added from v4.10:
commit a528d35e8b ("statx: Add a system call to make enhanced file info available")
It has been supported by all of the platforms since at least from v4.20.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-riscv/ee8b1f02-ded1-488b-a3a5-68774f0349b5@app.fastmail.com/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
syscall() is used by "normal" libcs to allow users to directly call
syscalls.
By having the same syntax inside nolibc users can more easily write code
that works with different libcs.
The macro logic is adapted from systemtaps STAP_PROBEV() macro that is
released in the public domain / CC0.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On s390 the arguments to clone() which is used by fork() are different
than other archs.
Make sure everything works correctly.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
To make sure no non-compatible changes are introduced accidentally
validate the language standard when building the tests.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Most of nolibc is already using C89 comments.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Most of the code was migrated to C99-conformant __asm__ statements
before. It seems string.h was missed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
vfprintf() is complex and so far did not have proper tests.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This can be used to easily compare the behavior of nolibc to the system
libc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Some extra tests for various integer types and limits were added by
commit d1209597ff ("tools/nolibc: add tests for the integer limits
in stdint.h"), but we forgot to retest with glibc. Stddef and stdint
are now needed for the program to build there.
Cc: Vincent Dagonneau <v@vda.io>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 9735716830 ("tools/nolibc: tests: add test for -fstack-protector")
brought a declaration inside the initialization statement of a for loop,
which breaks the build on compilers that do not default to c99
compatibility, making it more difficult to validate that the lib still
builds on such compilers. The fix is trivial, so let's move the
declaration to the variables block of the function instead. No backport
is needed.
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Use a volatile pointer to write outside the buffer so the compiler can't
optimize it away.
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://lore.kernel.org/lkml/c0584807-511c-4496-b062-1263ea38f349@p183/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Enable the new stackprotector support for x86_64.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Enable the new stackprotector support for i386.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Test the previously introduce stack protector functionality in nolibc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For the cflags to enable stack protectors to work properly they need to
be specified after -fno-stack-protector.
To do this fold all cflags into a single variable and move
-fno-stack-protector before the arch-specific cflags and another
one specific to stack protectors since we don't want to enable them
on all archs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Nothing ever modifies this structure.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
These two tests always fail when the program is started natively as an
unprivileged user, and require the user to carefully check the output
of "make run-user" and ignore them.
Let's add an euid check and condition these two tests to euid==0. Now
the test case stops needlessly reporting failures. E.g.:
$ make -C tools/testing/selftests/nolibc run-user
...
CC nolibc-test
123 test(s) passed.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds tests for the limits added in a previous commit. The
limits are defined in decimal in stdint.h and as hexadecimal in the
tests (e.g. 0x7f = 127 or 0x80 = -128). Hopefully it catches some of the
most egregious mistakes.
As we rely on the compiler to provide __SIZEOF_LONG__, we also test
whether it is defined.
Signed-off-by: Vincent Dagonneau <v@vda.io>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit enlarges the column width from 40 to 64 characters to make
room for longer tests
Signed-off-by: Vincent Dagonneau <v@vda.io>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stack protectors need support from libc.
This support is not provided by nolibc which leads to compiler errors
when stack protectors are enabled by default in a compiler:
CC nolibc-test
/usr/bin/ld: /tmp/ccqbHEPk.o: in function `stat':
nolibc-test.c:(.text+0x1d1): undefined reference to `__stack_chk_fail'
/usr/bin/ld: /tmp/ccqbHEPk.o: in function `poll.constprop.0':
nolibc-test.c:(.text+0x37b): undefined reference to `__stack_chk_fail'
/usr/bin/ld: /tmp/ccqbHEPk.o: in function `vfprintf.constprop.0':
nolibc-test.c:(.text+0x712): undefined reference to `__stack_chk_fail'
/usr/bin/ld: /tmp/ccqbHEPk.o: in function `pad_spc.constprop.0':
nolibc-test.c:(.text+0x80d): undefined reference to `__stack_chk_fail'
/usr/bin/ld: /tmp/ccqbHEPk.o: in function `printf':
nolibc-test.c:(.text+0x8c4): undefined reference to `__stack_chk_fail'
/usr/bin/ld: /tmp/ccqbHEPk.o:nolibc-test.c:(.text+0x12d4): more undefined references to `__stack_chk_fail' follow
collect2: error: ld returned 1 exit status
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When developing tests, it is much faster to use the QEMU Linux
emulator instead of the system emulator, which among other things avoids
kernel-build latencies. Although use of the QEMU Linux emulator does have
its limitations (please see below), it is sufficient to test startup code,
stdlib code, and syscall calling conventions.
However, the current mainline Linux-kernel nolibc setup does not
support this. Therefore, add a "run-user" target that immediately
executes the prebuilt executable.
Again, this approach does have its limitations. For example, the
executable runs with the user's privilege level, which can cause some
false-positive failures due to insufficient permissions. In addition,
if the underlying kernel is old enough to lack some features that
nolibc relies on, the result will be false-positive failures in the
corresponding tests. However, for nolibc changes not affected by these
limittions, the result is a much faster code-compile-test-debug cycle.
With this patch, running a userland test is as simple as issuing:
make ARCH=xxx CROSS_COMPILE=xxx run-user
Signed-off-by: Willy Tarreau <w@1wt.eu>
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Building the kernel with ARCH=x86_64 works fine, but nolibc-test
only supports "x86", which causes errors when reusing existing build
environment. Let's permit this environment to be used as well by making
nolibc also accept ARCH=x86_64.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
