Add kernel command line to add tracing instances. This only creates
instances at boot but still does not enable any events to them. Later
changes will extend this command line to add enabling of events, filters,
and triggers. As well as possibly redirecting trace_printk()!
Link: https://lkml.kernel.org/r/20230207173026.186210158@goodmis.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The test to check if the field is a stack is to be done if it is not a
string. But the code had:
} if (event->fields[i]->is_stack) {
and not
} else if (event->fields[i]->is_stack) {
which would cause it to always be tested. Worse yet, this also included an
"else" statement that was only to be called if the field was not a string
and a stack, but this code allows it to be called if it was a string (and
not a stack).
Also fixed some whitespace issues.
Link: https://lore.kernel.org/all/202301302110.mEtNwkBD-lkp@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230131095237.63e3ca8d@gandalf.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 00cf3d672a ("tracing: Allow synthetic events to pass around stacktraces")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
there is one dwc3 trace event declare as below,
DECLARE_EVENT_CLASS(dwc3_log_event,
TP_PROTO(u32 event, struct dwc3 *dwc),
TP_ARGS(event, dwc),
TP_STRUCT__entry(
__field(u32, event)
__field(u32, ep0state)
__dynamic_array(char, str, DWC3_MSG_MAX)
),
TP_fast_assign(
__entry->event = event;
__entry->ep0state = dwc->ep0state;
),
TP_printk("event (%08x): %s", __entry->event,
dwc3_decode_event(__get_str(str), DWC3_MSG_MAX,
__entry->event, __entry->ep0state))
);
the problem is when trace function called, it will allocate up to
DWC3_MSG_MAX bytes from trace event buffer, but never fill the buffer
during fast assignment, it only fill the buffer when output function are
called, so this means if output function are not called, the buffer will
never used.
add __get_buf(len) which acquiree buffer from iter->tmp_seq when trace
output function called, it allow user write string to acquired buffer.
the mentioned dwc3 trace event will changed as below,
DECLARE_EVENT_CLASS(dwc3_log_event,
TP_PROTO(u32 event, struct dwc3 *dwc),
TP_ARGS(event, dwc),
TP_STRUCT__entry(
__field(u32, event)
__field(u32, ep0state)
),
TP_fast_assign(
__entry->event = event;
__entry->ep0state = dwc->ep0state;
),
TP_printk("event (%08x): %s", __entry->event,
dwc3_decode_event(__get_buf(DWC3_MSG_MAX), DWC3_MSG_MAX,
__entry->event, __entry->ep0state))
);.
Link: https://lore.kernel.org/linux-trace-kernel/1675065249-23368-1-git-send-email-quic_linyyuan@quicinc.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
With the fix that made poll() and select() block if read would block
caused a slight regression in rasdaemon, as it needed that kind
of behavior. Add a way to make that behavior come back by writing
zero into the "buffer_percentage", which means to never block on read.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY+Jn3xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgQ6AQC30hHcPMPm8+drlH/P6wEYstRP6xbp
nHYHcvT6qXNPtAD+OhUQR2Zav66m6cE0qvkdnZb72E0YHRTfBhN5OpshTgQ=
=dJEF
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix regression in poll() and select()
With the fix that made poll() and select() block if read would block
caused a slight regression in rasdaemon, as it needed that kind of
behavior. Add a way to make that behavior come back by writing zero
into the 'buffer_percentage', which means to never block on read"
* tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw
This patch passes the full response so that the audit function can use all
of it. The audit function was updated to log the additional information in
the AUDIT_FANOTIFY record.
Currently the only type of fanotify info that is defined is an audit
rule number, but convert it to hex encoding to future-proof the field.
Hex encoding suggested by Paul Moore <paul@paul-moore.com>.
The {subj,obj}_trust values are {0,1,2}, corresponding to no, yes, unknown.
Sample records:
type=FANOTIFY msg=audit(1600385147.372:590): resp=2 fan_type=1 fan_info=3137 subj_trust=3 obj_trust=5
type=FANOTIFY msg=audit(1659730979.839:284): resp=1 fan_type=0 fan_info=0 subj_trust=2 obj_trust=2
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Link: https://lore.kernel.org/r/3075502.aeNJFYEL58@x2
Tested-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <bcb6d552e517b8751ece153e516d8b073459069c.1675373475.git.rgb@redhat.com>
The user space API for the response variable is __u32. This patch makes
sure that the whole path through the kernel uses u32 so that there is
no sign extension or truncation of the user space response.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Link: https://lore.kernel.org/r/12617626.uLZWGnKmhe@x2
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Tested-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <3778cb0b3501bc4e686ba7770b20eb9ab0506cf4.1675373475.git.rgb@redhat.com>
set_cpus_allowed_ptr() will fail with -EINVAL if the requested
affinity mask is not a subset of the task_cpu_possible_mask() for the
task being updated. Consequently, on a heterogeneous system with cpusets
spanning the different CPU types, updates to the cgroup hierarchy can
silently fail to update task affinities when the effective affinity
mask for the cpuset is expanded.
For example, consider an arm64 system with 4 CPUs, where CPUs 2-3 are
the only cores capable of executing 32-bit tasks. Attaching a 32-bit
task to a cpuset containing CPUs 0-2 will correctly affine the task to
CPU 2. Extending the cpuset to CPUs 0-3, however, will fail to extend
the affinity mask of the 32-bit task because update_tasks_cpumask() will
pass the full 0-3 mask to set_cpus_allowed_ptr().
Extend update_tasks_cpumask() to take a temporary 'cpumask' paramater
and use it to mask the 'effective_cpus' mask with the possible mask for
each task being updated.
Fixes: 431c69fac0 ("cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit 8f9ea86fdf ("sched: Always preserve the user
requested cpumask"), relax_compatible_cpus_allowed_ptr() is calling
__sched_setaffinity() unconditionally. This helps to expose a bug in
the current cpuset hotplug code where the cpumasks of the tasks in
the top cpuset are not updated at all when some CPUs become online or
offline. It is likely caused by the fact that some of the tasks in the
top cpuset, like percpu kthreads, cannot have their cpu affinity changed.
One way to reproduce this as suggested by Peter is:
- boot machine
- offline all CPUs except one
- taskset -p ffffffff $$
- online all CPUs
Fix this by allowing cpuset_cpus_allowed() to return a wider mask that
includes offline CPUs for those tasks that are in the top cpuset. For
tasks not in the top cpuset, the old rule applies and only online CPUs
will be returned in the mask since hotplug events will update their
cpumasks accordingly.
Fixes: 8f9ea86fdf ("sched: Always preserve the user requested cpumask")
Reported-by: Will Deacon <will@kernel.org>
Originally-from: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Using __irq_domain_alloc_irqs() is an unnecessary complexity. Use
irq_domain_alloc_irqs(), which is simpler and makes the code more
readable.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230202141956.2299521-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let L1 and L2 be two spinlocks.
Let T1 be a task holding L1 and blocked on L2. T1, currently, is the top
waiter of L2.
Let T2 be the task holding L2.
Let T3 be a task trying to acquire L1.
The following events will lead to a state in which the wait queue of L2
isn't empty, but no task actually holds the lock.
T1 T2 T3
== == ==
spin_lock(L1)
| raw_spin_lock(L1->wait_lock)
| rtlock_slowlock_locked(L1)
| | task_blocks_on_rt_mutex(L1, T3)
| | | orig_waiter->lock = L1
| | | orig_waiter->task = T3
| | | raw_spin_unlock(L1->wait_lock)
| | | rt_mutex_adjust_prio_chain(T1, L1, L2, orig_waiter, T3)
spin_unlock(L2) | | | |
| rt_mutex_slowunlock(L2) | | | |
| | raw_spin_lock(L2->wait_lock) | | | |
| | wakeup(T1) | | | |
| | raw_spin_unlock(L2->wait_lock) | | | |
| | | | waiter = T1->pi_blocked_on
| | | | waiter == rt_mutex_top_waiter(L2)
| | | | waiter->task == T1
| | | | raw_spin_lock(L2->wait_lock)
| | | | dequeue(L2, waiter)
| | | | update_prio(waiter, T1)
| | | | enqueue(L2, waiter)
| | | | waiter != rt_mutex_top_waiter(L2)
| | | | L2->owner == NULL
| | | | wakeup(T1)
| | | | raw_spin_unlock(L2->wait_lock)
T1 wakes up
T1 != top_waiter(L2)
schedule_rtlock()
If the deadline of T1 is updated before the call to update_prio(), and the
new deadline is greater than the deadline of the second top waiter, then
after the requeue, T1 is no longer the top waiter, and the wrong task is
woken up which will then go back to sleep because it is not the top waiter.
This can be reproduced in PREEMPT_RT with stress-ng:
while true; do
stress-ng --sched deadline --sched-period 1000000000 \
--sched-runtime 800000000 --sched-deadline \
1000000000 --mmapfork 23 -t 20
done
A similar issue was pointed out by Thomas versus the cases where the top
waiter drops out early due to a signal or timeout, which is a general issue
for all regular rtmutex use cases, e.g. futex.
The problematic code is in rt_mutex_adjust_prio_chain():
// Save the top waiter before dequeue/enqueue
prerequeue_top_waiter = rt_mutex_top_waiter(lock);
rt_mutex_dequeue(lock, waiter);
waiter_update_prio(waiter, task);
rt_mutex_enqueue(lock, waiter);
// Lock has no owner?
if (!rt_mutex_owner(lock)) {
// Top waiter changed
----> if (prerequeue_top_waiter != rt_mutex_top_waiter(lock))
----> wake_up_state(waiter->task, waiter->wake_state);
This only takes the case into account where @waiter is the new top waiter
due to the requeue operation.
But it fails to handle the case where @waiter is not longer the top
waiter due to the requeue operation.
Ensure that the new top waiter is woken up so in all cases so it can take
over the ownerless lock.
[ tglx: Amend changelog, add Fixes tag ]
Fixes: c014ef69b3 ("locking/rtmutex: Add wake_state to rt_mutex_waiter")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230117172649.52465-1-wander@redhat.com
Link: https://lore.kernel.org/r/20230202123020.14844-1-wander@redhat.com
Use atomic64_try_cmpxchg() instead of atomic64_cmpxchg() in
__update_gt_cputime(). The x86 CMPXCHG instruction returns success in ZF
flag, so this change saves a compare after cmpxchg() (and related move
instruction in front of cmpxchg()).
Also, atomic64_try_cmpxchg() implicitly assigns old *ptr value to "old"
when cmpxchg() fails. There is no need to re-read the value in the loop.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230116165337.5810-1-ubizjak@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPgG/geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGidAH/j0pUbmniNM3aft8
5O1XxltlOZgqxju8OQhkiuX9VnQuuSeTNhAuj6jfcQOLpXDvlKsVfrpBxEfXalML
yead9QAy/OT3hNGQxifMQzGbsmaWH1kgxxnv2lKo2eNP5KYZ+rec+IgtQhgX9quN
q/N/ymd2/ju9AEOVRYwG1PD1EiIwTd3xPfBZl4Z35J+Ym+6NRrlXmN6J9LwslXmJ
/P4cwgdf9/TuYAB96EshRHsZ4Tk/Gxkn15uyhLaWBmrZ/LAF5JGbClEfFlCWgjwv
F5SGv3F+O6HSv49W9a24XtenE+3tw78AbCdqKZyzbb2whhv1eY99vKSbGnCahc/y
O0VBP/g=
=YoPk
-----END PGP SIGNATURE-----
Merge 6.2-rc7 into char-misc-next
We need the char-misc driver fixes in here as other patches depend on
them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a number of small char/misc/whatever driver fixes for 6.2-rc7.
They include:
- IIO driver fixes for some reported problems
- nvmem driver fixes
- fpga driver fixes
- debugfs memory leak fix in the hv_balloon and irqdomain code
(irqdomain change was acked by the maintainer.)
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY9+Xkw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl92QCfSTATuad8nUXmtBDsveUyAV3G6pkAoJFMWAIj
otmAl9XOGWxdwAURdovs
=tSdo
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/whatever driver fixes. They
include:
- IIO driver fixes for some reported problems
- nvmem driver fixes
- fpga driver fixes
- debugfs memory leak fix in the hv_balloon and irqdomain code
(irqdomain change was acked by the maintainer)
All have been in linux-next with no reported problems"
* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
HV: hv_balloon: fix memory leak with using debugfs_lookup()
nvmem: qcom-spmi-sdam: fix module autoloading
nvmem: core: fix return value
nvmem: core: fix cell removal on error
nvmem: core: fix device node refcounting
nvmem: core: fix registration vs use race
nvmem: core: fix cleanup after dev_set_name()
nvmem: core: remove nvmem_config wp_gpio
nvmem: core: initialise nvmem->id early
nvmem: sunxi_sid: Always use 32-bit MMIO reads
nvmem: brcm_nvram: Add check for kzalloc
iio: imu: fxos8700: fix MAGN sensor scale and unit
iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
iio: imu: fxos8700: fix failed initialization ODR mode assignment
iio: imu: fxos8700: fix incorrect ODR mode readback
iio: light: cm32181: Fix PM support on system with 2 I2C resources
iio: hid: fix the retval in gyro_3d_capture_sample
iio: hid: fix the retval in accel_3d_capture_sample
iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
...
All RISC-V platforms have a single HW IPI provided by the INTC local
interrupt controller. The HW method to trigger INTC IPI can be through
external irqchip (e.g. RISC-V AIA), through platform specific device
(e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).
To support multiple IPIs on RISC-V, add a generic IPI multiplexing
mechanism which help us create multiple virtual IPIs using a single
HW IPI. This generic IPI multiplexing is inspired by the Apple AIC
irqchip driver and it is shared by various RISC-V irqchip drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230103141221.772261-4-apatel@ventanamicro.com
Switch from a request_queue pointer and reference to a gendisk once
for the throttle information in struct task_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Link: https://lore.kernel.org/r/20230203150400.3199230-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Josh reported a bug:
When the object to be patched is a module, and that module is
rmmod'ed and reloaded, it fails to load with:
module: x86/modules: Skipping invalid relocation target, existing value is nonzero for type 2, loc 00000000ba0302e9, val ffffffffa03e293c
livepatch: failed to initialize patch 'livepatch_nfsd' for module 'nfsd' (-8)
livepatch: patch 'livepatch_nfsd' failed for module 'nfsd', refusing to load module 'nfsd'
The livepatch module has a relocation which references a symbol
in the _previous_ loading of nfsd. When apply_relocate_add()
tries to replace the old relocation with a new one, it sees that
the previous one is nonzero and it errors out.
He also proposed three different solutions. We could remove the error
check in apply_relocate_add() introduced by commit eda9cec4c9
("x86/module: Detect and skip invalid relocations"). However the check
is useful for detecting corrupted modules.
We could also deny the patched modules to be removed. If it proved to be
a major drawback for users, we could still implement a different
approach. The solution would also complicate the existing code a lot.
We thus decided to reverse the relocation patching (clear all relocation
targets on x86_64). The solution is not
universal and is too much arch-specific, but it may prove to be simpler
in the end.
Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Originally-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230125185401.279042-2-song@kernel.org
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Chris Down <chris@chrisdown.name>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230202151411.2308576-1-gregkh@linuxfoundation.org
kexec allows replacing the current kernel with a different one. This is
usually a source of concerns for sysadmins that want to harden a system.
Linux already provides a way to disable loading new kexec kernel via
kexec_load_disabled, but that control is very coard, it is all or nothing
and does not make distinction between a panic kexec and a normal kexec.
This patch introduces new sysctl parameters, with finer tuning to specify
how many times a kexec kernel can be loaded. The sysadmin can set
different limits for kexec panic and kexec reboot kernels. The value can
be modified at runtime via sysctl, but only with a stricter value.
With these new parameters on place, a system with loadpin and verity
enabled, using the following kernel parameters:
sysctl.kexec_load_limit_reboot=0 sysct.kexec_load_limit_panic=1 can have a
good warranty that if initrd tries to load a panic kernel, a malitious
user will have small chances to replace that kernel with a different one,
even if they can trigger timeouts on the disk where the panic kernel
lives.
Link: https://lkml.kernel.org/r/20221114-disable-kexec-reset-v6-3-6a8531a09b9a@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both syscalls (kexec and kexec_file) do the same check, let's factor it
out.
Link: https://lkml.kernel.org/r/20221114-disable-kexec-reset-v6-2-6a8531a09b9a@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the 'struct' keyword for a struct's kernel-doc notation to avoid a
kernel-doc warning:
kernel/user_namespace.c:232: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* idmap_key struct holds the information necessary to find an idmapping in a
Link: https://lkml.kernel.org/r/20230108021243.16683-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When destroying a kthread worker warn if there are still some pending
delayed works. This indicates that the caller should clear all pending
delayed works before destroying the kthread worker.
Link: https://lkml.kernel.org/r/20230104144230.938521-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230202151554.2310273-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm: In-kernel support for memory-deny-write-execute (MDWE)",
v2.
The background to this is that systemd has a configuration option called
MemoryDenyWriteExecute [2], implemented as a SECCOMP BPF filter. Its aim
is to prevent a user task from inadvertently creating an executable
mapping that is (or was) writeable. Since such BPF filter is stateless,
it cannot detect mappings that were previously writeable but subsequently
changed to read-only. Therefore the filter simply rejects any
mprotect(PROT_EXEC). The side-effect is that on arm64 with BTI support
(Branch Target Identification), the dynamic loader cannot change an ELF
section from PROT_EXEC to PROT_EXEC|PROT_BTI using mprotect(). For
libraries, it can resort to unmapping and re-mapping but for the main
executable it does not have a file descriptor. The original bug report in
the Red Hat bugzilla - [3] - and subsequent glibc workaround for libraries
- [4].
This series adds in-kernel support for this feature as a prctl
PR_SET_MDWE, that is inherited on fork(). The prctl denies PROT_WRITE |
PROT_EXEC mappings. Like the systemd BPF filter it also denies adding
PROT_EXEC to mappings. However unlike the BPF filter it only denies it if
the mapping didn't previous have PROT_EXEC. This allows to PROT_EXEC ->
PROT_EXEC | PROT_BTI with mprotect(), which is a problem with the BPF
filter.
This patch (of 2):
The aim of such policy is to prevent a user task from creating an
executable mapping that is also writeable.
An example of mmap() returning -EACCESS if the policy is enabled:
mmap(0, size, PROT_READ | PROT_WRITE | PROT_EXEC, flags, 0, 0);
Similarly, mprotect() would return -EACCESS below:
addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0);
mprotect(addr, size, PROT_READ | PROT_WRITE | PROT_EXEC);
The BPF filter that systemd MDWE uses is stateless, and disallows
mprotect() with PROT_EXEC completely. This new prctl allows PROT_EXEC to
be enabled if it was already PROT_EXEC, which allows the following case:
addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0);
mprotect(addr, size, PROT_READ | PROT_EXEC | PROT_BTI);
where PROT_BTI enables branch tracking identification on arm64.
Link: https://lkml.kernel.org/r/20230119160344.54358-1-joey.gouly@arm.com
Link: https://lkml.kernel.org/r/20230119160344.54358-2-joey.gouly@arm.com
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: nd <nd@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Cc: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers now have a folio and can call munlock_vma_folio(). Update the
documentation to refer to munlock_vma_folio().
Link: https://lkml.kernel.org/r/20230116192827.2146732-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All former users now use the folio equivalents, so remove them from the
definition of struct page.
Link: https://lkml.kernel.org/r/20230111142915.1001531-23-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mmu_notifier_range_update_to_read_only() was originally introduced in
commit c6d23413f8 ("mm/mmu_notifier:
mmu_notifier_range_update_to_read_only() helper") as an optimisation for
device drivers that know a range has only been mapped read-only. However
there are no users of this feature so remove it. As it is the only user
of the struct mmu_notifier_range.vma field remove that also.
Link: https://lkml.kernel.org/r/20230110025722.600912-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The do_idr_lock parameter to bpf_map_free_id was introduced by commit
bd5f5f4ecb ("bpf: Add BPF_MAP_GET_FD_BY_ID"). However, all callers set
do_idr_lock = true since commit 1e0bd5a091 ("bpf: Switch bpf_map ref
counter to atomic64_t so bpf_map_inc() never fails").
While at it also inline __bpf_map_put into its only caller bpf_map_put
now that do_idr_lock can be dropped from its signature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20230202141921.4424-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in conditional compilation based on CONFIG_SRCU.
Therefore, remove the #ifdef.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Borislav Petkov <bp@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select
the right cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=OGU7
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers"
* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
...
poll() and select() on per_cpu trace_pipe and trace_pipe_raw do not work
since kernel 6.1-rc6. This issue is seen after the commit
42fb0a1e84 ("tracing/ring-buffer: Have
polling block on watermark").
This issue is firstly detected and reported, when testing the CXL error
events in the rasdaemon and also erified using the test application for poll()
and select().
This issue occurs for the per_cpu case, when calling the ring_buffer_poll_wait(),
in kernel/trace/ring_buffer.c, with the buffer_percent > 0 and then wait until the
percentage of pages are available. The default value set for the buffer_percent is 50
in the kernel/trace/trace.c.
As a fix, allow userspace application could set buffer_percent as 0 through
the buffer_percent_fops, so that the task will wake up as soon as data is added
to any of the specific cpu buffer.
Link: https://lore.kernel.org/linux-trace-kernel/20230202182309.742-2-shiju.jose@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mchehab@kernel.org>
Cc: <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 42fb0a1e84 ("tracing/ring-buffer: Have polling block on watermark")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Dynamic TraceID allocation scheme for CoreSight trace source. Allows systems
with > 44 CPUs to use the ETMs. TraceID is advertised via AUX_OUTPUT_HWID
packets in perf.data. Also allows allocating trace-ids for non-CPU bound trace
components (e.g., Qualcomm TPDA).
- Support for Qualcomm TPDA and TPDM CoreSight devices.
- Support for Ultrasoc SMB CoreSight Sink buffer.
- Fixes for HiSilicon PTT driver
- MAINTAINERS update: Add Reviewer for HiSilicon PTT driver
- Bug fixes for CTI power management and sysfs mode
- Fix CoreSight ETM4x TRCSEQRSTEVRn access
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=FS9z
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for v6.3
- Dynamic TraceID allocation scheme for CoreSight trace source. Allows systems
with > 44 CPUs to use the ETMs. TraceID is advertised via AUX_OUTPUT_HWID
packets in perf.data. Also allows allocating trace-ids for non-CPU bound trace
components (e.g., Qualcomm TPDA).
- Support for Qualcomm TPDA and TPDM CoreSight devices.
- Support for Ultrasoc SMB CoreSight Sink buffer.
- Fixes for HiSilicon PTT driver
- MAINTAINERS update: Add Reviewer for HiSilicon PTT driver
- Bug fixes for CTI power management and sysfs mode
- Fix CoreSight ETM4x TRCSEQRSTEVRn access
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (35 commits)
coresight: tmc: Don't enable TMC when it's not ready.
coresight: tpda: fix return value check in tpda_probe()
Coresight: tpda/tpdm: remove incorrect __exit annotation
coresight: perf: Output trace id only once
coresight: Fix uninitialised variable use in coresight_disable
Documentation: coresight: tpdm: Add dummy comment after sysfs list
Documentation: coresight: Extend title heading syntax in TPDM and TPDA documentation
Documentation: trace: Add documentation for TPDM and TPDA
dt-bindings: arm: Adds CoreSight TPDA hardware definitions
Coresight: Add TPDA link driver
coresight-tpdm: Add integration test support
coresight-tpdm: Add DSB dataset support
dt-bindings: arm: Add CoreSight TPDM hardware
Coresight: Add coresight TPDM source driver
coresight: core: Use IDR for non-cpu bound sources' paths.
coresight: trace-id: Add debug & test macros to Trace ID allocation
coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID
kernel: events: Export perf_report_aux_output_id()
coresight: trace id: Remove legacy get trace ID function.
coresight: etmX.X: stm: Remove trace_id() callback
...
Now that we have the __bpf_kfunc tag, we should use add it to all
existing kfuncs to ensure that they'll never be elided in LTO builds.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230201173016.342758-4-void@manifault.com
It was found that the check to see if a partition could use up all
the cpus from the parent cpuset in update_parent_subparts_cpumask()
was incorrect. As a result, it is possible to leave parent with no
effective cpu left even if there are tasks in the parent cpuset. This
can lead to system panic as reported in [1].
Fix this probem by updating the check to fail the enabling the partition
if parent's effective_cpus is a subset of the child's cpus_allowed.
Also record the error code when an error happens in update_prstate()
and add a test case where parent partition and child have the same cpu
list and parent has task. Enabling partition in the child will fail in
this case.
[1] https://www.spinics.net/lists/cgroups/msg36254.html
Fixes: f0af1bfc27 ("cgroup/cpuset: Relax constraints to partition & cpus changes")
Cc: stable@vger.kernel.org # v6.1
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Syzkaller triggered a WARN in put_pmu_ctx().
WARNING: CPU: 1 PID: 2245 at kernel/events/core.c:4925 put_pmu_ctx+0x1f0/0x278
This is because there is no locking around the access of "if
(!epc->ctx)" in find_get_pmu_context() and when it is set to NULL in
put_pmu_ctx().
The decrement of the reference count in put_pmu_ctx() also happens
outside of the spinlock, leading to the possibility of this order of
events, and the context being cleared in put_pmu_ctx(), after its
refcount is non zero:
CPU0 CPU1
find_get_pmu_context()
if (!epc->ctx) == false
put_pmu_ctx()
atomic_dec_and_test(&epc->refcount) == true
epc->refcount == 0
atomic_inc(&epc->refcount);
epc->refcount == 1
list_del_init(&epc->pmu_ctx_entry);
epc->ctx = NULL;
Another issue is that WARN_ON for no active PMU events in put_pmu_ctx()
is outside of the lock. If the perf_event_pmu_context is an embedded
one, even after clearing it, it won't be deleted and can be re-used. So
the warning can trigger. For this reason it also needs to be moved
inside the lock.
The above warning is very quick to trigger on Arm by running these two
commands at the same time:
while true; do perf record -- ls; done
while true; do perf record -- ls; done
[peterz: atomic_dec_and_raw_lock*()]
Fixes: bd27568117 ("perf: Rewrite core context handling")
Reported-by: syzbot+697196bc0265049822bd@syzkaller.appspotmail.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20230127143141.1782804-2-james.clark@arm.com
With sched_clock() noinstr, provide a noinstr implementation of
local_clock().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126151323.760767043@infradead.org
In order to avoid WARN/BUG from generating nested or even recursive
warnings, force rcu_is_watching() true during
WARN/lockdep_rcu_suspicious().
Notably things like unwinding the stack can trigger rcu_dereference()
warnings, which then triggers more unwinding which then triggers more
warnings etc..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126151323.408156109@infradead.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ
E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg
nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG
TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp
s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER
ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh
SDc/Y/c=
=zpaD
-----END PGP SIGNATURE-----
Merge tag 'v6.2-rc6' into sched/core, to pick up fixes
Pick up fixes before merging another batch of cpuidle updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While in theory the timer can be triggered before expires + delta, for the
cases of RT tasks they really have no business giving any lenience for
extra slack time, so override any passed value by the user and always use
zero for schedule_hrtimeout_range() calls. Furthermore, this is similar to
what the nanosleep(2) family already does with current->timer_slack_ns.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230123173206.6764-3-dave@stgolabs.net
avoid leaking memory
-----BEGIN PGP SIGNATURE-----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=qrIZ
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Cleanup the firmware node for the new IRQ MSI domain properly, to
avoid leaking memory
* tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Free the fwnode created by msi_create_device_irq_domain()
s390x eBPF JIT needs to know whether a function return value is signed
and which function arguments are signed, in order to generate code
compliant with the s390x ABI.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-26-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
iterators.lskel.h is little-endian, therefore bpf iterator is currently
broken on big-endian systems. Introduce a big-endian version and add
instructions regarding its generation. Unfortunately bpftool's
cross-endianness capabilities are limited to BTF right now, so the
procedure requires access to a big-endian machine or a configured
emulator.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-25-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
