This patch adds a new device tree binding for an LPDDR channel to serve
as a top-level organizing node for LPDDR part nodes nested below it. An
LPDDR channel needs to have an "io-width" property to describe its width
(this is important because this width does not always match the io-width
of the part number, indicating that multiple parts are wired in parallel
on the same channel), as well as one or more nested "rank@X" nodes.
Those represent information about the individual ranks of each LPDDR
part connected on that channel and should match the existing
"jedec,lpddrX" bindings for individual LPDDR parts.
New platforms should be using this node -- the existing practice of
providing a raw, toplevel "jedec,lpddrX" node without indication of how
many identical parts are in the system should be considered deprecated.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220930220606.303395-4-jwerner@chromium.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This patch adds bindings for LPDDR4 and LPDDR5 memory analogous to the
existing bindings for LPDDR2 and LPDDR3. For now, the new types are only
needed for topology description, so other properties like timing
parameters are omitted. They can be added later if needed.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220930220606.303395-3-jwerner@chromium.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This patch allows a new kind of compatible string for LPDDR parts in the
device tree bindings, in addition to the existing hardcoded
<vendor>,<part-number> strings. The new format contains manufacturer and
part (revision) information in numerical form, such as lpddr3-ff,0201
for an LPDDR3 part with manufacturer ID ff and revision ID 0201. This
helps cases where LPDDR parts are probed at runtime by boot firmware and
cannot be matched to hardcoded part numbers, such as the firmware on the
qcom/sc7280-herobrine boards does (which supports 4 different memory
configurations at the moment, and more are expected to be added later at
a point where the boot firmware can no longer be updated to specifically
accommodate them).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220930220606.303395-2-jwerner@chromium.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The bindings for different LPDDR versions mostly use the same kinds of
properties, so in order to reduce duplication when we're adding support
for more versions, this patch creates a new lpddr-props subschema that
can be referenced by the others to define these common parts. (This will
consider a few smaller I/O width and density numbers "legal" for LPDDR3
that are usually not used there, but this should be harmless.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220930220606.303395-1-jwerner@chromium.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski's @canonical.com email stopped working, so switch to
generic @kernel.org account for all Devicetree bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220330074016.12896-2-krzysztof.kozlowski@linaro.org
Commit 3539a2c6c6 ("dt-bindings: memory: lpddr2: Add revision-id
properties") added the properties `revision-id1` and `revision-id2` to
the "jedec,lpddr2" binding. The "jedec,lpddr3" binding already had a
single array property `revision-id` for the same purpose. For
consistency between related memory types, this patch deprecates the
LPDDR2 properties and instead adds a property in the same style as for
LPDDR3 to that binding.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220224003421.3440124-2-jwerner@chromium.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The timings node maximum frequency was passed as an unit address, which
is actually a workaround. Such workaround and unit address are not
needed at all, because the device memory node (parent) can contain
multiple timing nodes without unit addresses but with suffix used for
nodenames, e.g. timings-1.
LPDDR2 bindings already use such version, so unify the LPDDR3 with them.
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220206135807.211767-7-krzysztof.kozlowski@canonical.com
The memory manufacturer should be described in vendor part of
compatible, so there is no need to duplicate it in a separate property.
Similarly is done in LPDDR2 bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220206135807.211767-6-krzysztof.kozlowski@canonical.com
According to JEDEC Standard No. 209-3 (table 3.4.1 "Mode Register
Assignment and Definition in LPDDR3 SDRAM"), the LPDDR3 supports only
16- and 32-bit IO width. Drop the unsupported others.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220206135807.211767-5-krzysztof.kozlowski@canonical.com
Elpida B8132B2PB-6D-F memory chip is used by ASUS Transformer TF101
tablet, add compatible for it. We need to specify this compatible it
for a device-tree node containing corresponding memory timings in order
to allow software to match the timings with the detected hardware.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-5-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add optional revision-id standard LPDDR2 properties which will help to
identify memory chip.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-4-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Convert LPDDR2 binding to schema. I removed obsolete ti,jedec-lpddr2-*
compatibles since they were never used by device-trees and by the code.
I also changed "Elpida" compatible prefix to lowercase "elpida".
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-3-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Move DDR bindings to memory-controllers directory to make them more
discoverable.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-2-digetx@gmail.com
[krzysztof: Correct path in lpddr3.txt and samsung,exynos5422-dmc.yaml]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
