Append the additional parameters passed/set in the dedicated parameter
area (RTAS_FADUMP_PARAM_AREA) to bootargs in fadump capture kernel.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509115755.519982-4-hbathini@linux.ibm.com
The first 32k of memory is reserved for interrupt vectors, however for
powerpc64 this might not be enough. Fix this by reserving the maximum
size between 32k and the real size of interrupt vectors.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240113080509.1598290-1-guozihua@huawei.com
memory limit value specified by the user are further updated such that
the value is 16MB aligned. This is because hash translation mode use
16MB as direct mapping page size. Make sure we update the global
variable 'memory_limit' with the 16MB aligned value such that all kernel
components will see the new aligned value of the memory limit.
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240403083611.172833-3-aneesh.kumar@kernel.org
The value specified for the memory limit is used to set a restriction on
memory usage. It is important to ensure that this restriction is within
the linear map kernel address space range. The hash page table
translation uses a 16MB page size to map the kernel linear map address
space. htab_bolt_mapping() function aligns down the size of the range
while mapping kernel linear address space. Since the memblock limit is
enforced very early during boot, before we can detect the type of memory
translation (radix vs hash), we align the memory limit value specified
as a kernel parameter to 16MB. This alignment value will work for both
hash and radix translations.
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Acked-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240403083611.172833-1-aneesh.kumar@kernel.org
Remove CONFIG_CRASH_DUMP dependency on CONFIG_KEXEC. CONFIG_KEXEC_CORE
was used at places where CONFIG_CRASH_DUMP or CONFIG_CRASH_RESERVE was
appropriate. Replace with appropriate #ifdefs to support CONFIG_KEXEC
and !CONFIG_CRASH_DUMP configuration option. Also, make CONFIG_FA_DUMP
dependent on CONFIG_CRASH_DUMP to avoid unmet dependencies for FA_DUMP
with !CONFIG_KEXEC_CORE configuration option.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240226103010.589537-4-hbathini@linux.ibm.com
PAPR will define a new ibm,pi-features bit which says that doorbells
should not be used even on architectures where they exist. This could be
because they are emulated and slower than using the interrupt controller
directly for IPIs.
Wire this bit into the pi-features parser to clear CPU_FTR_DBELL, and
ensure CPU_FTR_DBELL is not in CPU_FTRS_ALWAYS.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240207035220.339726-2-npiggin@gmail.com
When a new ibm,pa/pi-features bit is introduced that is intended to
apply to existing systems and features, it may have an "inverted"
meaning (i.e., bit clear => feature available; bit set => unavailable).
Depending on the nature of the feature, this may give the best
backward compatibility result where old firmware will continue to
have that bit clear and therefore the feature available.
The 'invert' modifier presumably was introduced for this type of
feature bit. However it invert will set the feature if the bit is
clear, which prevents it being used in the situation where an old
CPU lacks a feature that a new CPU has, then a new firmware comes
out to disable that feature on the new CPU if the bit is set.
Adding an 'invert' entry for that feature would incorrectly enable
it for the old CPU.
So add a 'clear' modifier that clears the feature if the bit is set,
but it does not set the feature if the bit is clear. The feature
is expected to be set in the cpu table.
This replaces the 'invert' modifier, which is unused since commit
7d47034551 ("powerpc/feature: Remove CPU_FTR_NODSISRALIGN").
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240207035220.339726-1-npiggin@gmail.com
If nr_cpu_ids is too low to include the boot CPU, remap the boot CPU
onto logical core 0.
This is achieved in two stages. In early_init_dt_scan_cpus() the boot
CPU is renumbered to be on logical core 0, and the original boot core's
hardware ID is recorded.
Later in smp_setup_cpu_maps(), if the original boot core ID is set, the
logical CPU numbers on the 0th core are skipped in the normal device
tree search over CPU device tree nodes. Then the search is continued
until the device tree node matching the boot core is found, and those
CPUs are assigned the CPU numbers starting at 0.
This allows kdump kernels to be booted with low values for nr_cpu_ids
to conserve memory, while also allowing the crashing/boot CPU to be
any CPU.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Link: https://msgid.link/20231229120107.2281153-5-mpe@ellerman.id.au
If nr_cpu_ids is too low to include at least all the threads of a single
core adjust nr_cpu_ids upwards. This avoids triggering odd bugs in code
that assumes all threads of a core are available.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231229120107.2281153-1-mpe@ellerman.id.au
ISA 3.1B introduces the Dynamic Execution Control Register (DEXCR). It
is a per-cpu register that allows control over various CPU behaviours
including branch hint usage, indirect branch speculation, and
hashst/hashchk support.
Add some definitions and basic support for the DEXCR in the kernel.
Right now it just
* Initialises the DEXCR and HASHKEYR to a fixed value when a CPU
onlines.
* Clears them in reset_sprs().
* Detects when the NPHIE aspect is supported (the others don't get
looked at in this series, so there's no need to waste a CPU_FTR
on them).
We initialise the HASHKEYR to ensure that all cores have the same key,
so an HV enforced NPHIE + swapping cores doesn't randomly crash a
process using hash instructions. The stores to HASHKEYR are
unconditional because the ISA makes no mention of the SPR being missing
if support for doing the hashes isn't present. So all that would happen
is the HASHKEYR value gets ignored. This helps slightly if NPHIE
detection fails; e.g., we currently only detect it on pseries.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Use simple values for DEXCR constants]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-4-bgray@linux.ibm.com
Before interacting with the PLPKS, we ask the hypervisor to generate a
password for the current boot, which is then required for most further
PLPKS operations.
If we kexec into a new kernel, the new kernel will try and fail to
generate a new password, as the password has already been set.
Pass the password through to the new kernel via the device tree, in
/chosen/ibm,plpks-pw. Check for the presence of this property before
trying to generate a new password - if it exists, use the existing
password and remove it from the device tree.
This only works with the kexec_file_load() syscall, not the older
kexec_load() syscall, however if you're using Secure Boot then you want
to be using kexec_file_load() anyway.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-24-ajd@linux.ibm.com
The early paca and boot cpuid dance is complicated and currently does
not quite work as expected for boot cpuid != 0 cases.
early_init_devtree() currently allocates the paca_ptrs and boot cpuid
paca, but until that returns and early_setup() calls setup_paca(), this
thread is currently still executing with smp_processor_id() == 0.
One problem this causes is the paca_ptrs[smp_processor_id()] pointer is
poisoned, so valid_emergency_stack() (any backtrace) and any similar
users will crash.
Another is that the hardware id which is set here will not be returned
by get_hard_smp_processor_id(smp_processor_id()), but it would work
correctly for boot_cpuid == 0, which could lead to difficult to
reproduce or find bugs. The hard id does not seem to be used by the rest
of early_init_devtree(), it just looks like all this code might have
been put here to allocate somewhere to store boot CPU hardware id while
scanning the devtree.
Rearrange things so the hwid is put in a global variable like
boot_cpuid, and do all the paca allocation and boot paca setup in the
64-bit early_setup() after we have everything ready to go.
The paca_ptrs[0] re-poisoning code in early_setup does not seem to have
ever worked, because paca_ptrs[0] was never not-poisoned when boot_cpuid
is not 0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix build error on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-4-npiggin@gmail.com
Add an IS_ENABLED() check to fix the build error:
arch/powerpc/kernel/prom.o: in function `early_init_dt_scan_cpus':
prom.c:(.init.text+0x2ea): undefined reference to `boot_cpu_node_count'
Fixes: e13d23a404 ("powerpc: export the CPU node count")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At boot time, the FDT is parsed to compute the number of CPUs.
In addition count the number of CPU nodes and export it.
This is useful when building the FDT for a kexeced kernel since we need to
take in account the CPU node added since the boot time during CPU hotplug
operations.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221110180619.15796-2-ldufour@linux.ibm.com
Add the model of the machine we're on to the hardware description, which
is printed at boot and in case of an oops.
eg: Hardware name: IBM,8247-22L
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-4-mpe@ellerman.id.au
If we detect a logical PVR add that to the hardware description, which
is printed at boot and in case of an oops.
eg: Hardware name: ... 0xf000004
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-3-mpe@ellerman.id.au
Add the PVR and CPU name to the hardware description, which is printed
at boot and in case of an oops.
eg: Hardware name: ... POWER8E (raw) 0x4b0201
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-2-mpe@ellerman.id.au
The data storage interrupt (DSI) error will be generated when the
paste operation is issued on the suspended Nest Accelerator (NX)
window due to NX state changes. The hypervisor expects the
partition to ignore this error during page fault handling.
To differentiate DSI caused by an actual HW configuration or by
the NX window, a new “ibm,pi-features” type value is defined.
Byte 0, bit 3 of pi-attribute-specifier-type is now defined to
indicate this DSI error. If this error is not ignored, the user
space can get SIGBUS when the NX request is issued.
This patch adds changes to read ibm,pi-features property and ignore
DSI error during page fault handling if MMU_FTR_NX_DSI is defined.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Mention PAPR version in comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b9cd844b85eb8f70459109ce1b14e44c4cc85fa7.camel@linux.ibm.com
On 64-bit, calling jump_label_init() in setup_feature_keys() is too
late because static keys may be used in subroutines of
parse_early_param() which is again subroutine of early_init_devtree().
For example booting with "threadirqs":
static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init()
WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120
...
NIP static_key_enable_cpuslocked+0xfc/0x120
LR static_key_enable_cpuslocked+0xf8/0x120
Call Trace:
static_key_enable_cpuslocked+0xf8/0x120 (unreliable)
static_key_enable+0x30/0x50
setup_forced_irqthreads+0x28/0x40
do_early_param+0xa0/0x108
parse_args+0x290/0x4e0
parse_early_options+0x48/0x5c
parse_early_param+0x58/0x84
early_init_devtree+0xd4/0x518
early_setup+0xb4/0x214
So call jump_label_init() just before parse_early_param() in
early_init_devtree().
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[mpe: Add call trace to change log and minor wording edits.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com
Mahesh & Sourabh identified two problems[1][2] with ppc64_bolted_size()
and paca allocation.
The first is that on a Radix capable machine but with "disable_radix" on
the command line, there is a window during early boot where
early_radix_enabled() is true, even though it will later become false.
early_init_devtree: <- early_radix_enabled() = false
early_init_dt_scan_cpus: <- early_radix_enabled() = false
...
check_cpu_pa_features: <- early_radix_enabled() = false
... ^ <- early_radix_enabled() = TRUE
allocate_paca: | <- early_radix_enabled() = TRUE
... |
ppc64_bolted_size: | <- early_radix_enabled() = TRUE
if (early_radix_enabled())| <- early_radix_enabled() = TRUE
return ULONG_MAX; |
... |
... | <- early_radix_enabled() = TRUE
... | <- early_radix_enabled() = TRUE
mmu_early_init_devtree() V
... <- early_radix_enabled() = false
This causes ppc64_bolted_size() to return ULONG_MAX for the boot CPU's
paca allocation, even though later it will return a different value.
This is not currently a bug because the paca allocation is also limited
by the RMA size, but that is very fragile.
The second issue is that when using the Hash MMU, when we call
ppc64_bolted_size() for the boot CPU's paca allocation, we have not yet
detected whether 1T segments are available. That causes
ppc64_bolted_size() to return 256MB, even if the machine can actually
support up to 1T. This is usually OK, we generally have space below
256MB for one paca, but for a kdump kernel placed above 256MB it causes
the boot to fail.
At boot we cannot discover all the features of the machine
instantaneously, so there will always be some periods where we have
incomplete knowledge of the system. However both the above problems stem
from the fact that we allocate the boot CPU's paca (and paca pointers
array) before we decide which MMU we are using, or discover its exact
features.
Moving the paca allocation slightly later still can solve both the
issues described above, and means for a normal boot we don't do any
permanent allocations until after we've discovered the MMU.
Note that although we move the boot CPU's paca allocation later, we
still have a temporary paca (boot_paca) accessible via r13, so code that
does read only access to paca fields is safe. The only risk is that some
code writes to the boot_paca, and that write will then be lost when we
switch away from the boot_paca later in early_setup().
The additional code that runs before the paca allocation is primarily
mmu_early_init_devtree(), which is scanning the device tree and
populating globals and cur_cpu_spec with MMU related flags. I do not see
any additional code that writes to paca fields.
[1]: https://lore.kernel.org/r/20211018084434.217772-2-sourabhjain@linux.ibm.com
[2]: https://lore.kernel.org/r/20211018084434.217772-3-sourabhjain@linux.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124130544.408675-1-mpe@ellerman.id.au
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10
or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated assembler.
- Many other small features and fixes.
Thanks to: Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig,
Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren,
Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent
Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju,
Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei
Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean
Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang
wangx, Yang Guang.
-----BEGIN PGP SIGNATURE-----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=BxhQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess
flushes on Power10 or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie.
Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them
on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated
assembler.
- Many other small features and fixes.
Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell,
Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard
Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason
Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour,
Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh
Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child,
Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring,
Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool,
Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang
Guang.
* tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits)
powerpc/xmon: Dump XIVE information for online-only processors.
powerpc/opal: use default_groups in kobj_type
powerpc/cacheinfo: use default_groups in kobj_type
powerpc/sched: Remove unused TASK_SIZE_OF
powerpc/xive: Add missing null check after calling kmalloc
powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API
selftests/powerpc: Add a test of sigreturning to an unaligned address
powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings
powerpc/64s: Mask NIP before checking against SRR0
powerpc/perf: Fix spelling of "its"
powerpc/32: Fix boot failure with GCC latent entropy plugin
powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests
powerpc/code-patching: Move code patching selftests in its own file
powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h
powerpc/code-patching: Move patch_exception() outside code-patching.c
powerpc/code-patching: Use test_trampoline for prefixed patch test
powerpc/code-patching: Fix patch_branch() return on out-of-range failure
powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling
powerpc/code-patching: Fix unmap_patch_area() error handling
powerpc/code-patching: Fix error handling in do_patch_instruction()
...
Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/
kexec`) are deserving of an `__init` macro attribute. These functions are
only called by other initialization functions and therefore should inherit
the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-2-nick.child@ibm.com
Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework
early_init_dt_scan_memory() to be called directly and use libfdt.
Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-mips@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211215150102.1303588-1-robh@kernel.org
Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework early_init_dt_scan_root()
to be called directly and use libfdt.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211118181213.1433346-3-robh@kernel.org
Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework
early_init_dt_scan_chosen() to be called directly and use libfdt.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211118181213.1433346-2-robh@kernel.org
Compiling out hash support code when CONFIG_PPC_64S_HASH_MMU=n saves
128kB kernel image size (90kB text) on powernv_defconfig minus KVM,
350kB on pseries_defconfig minus KVM, 40kB on a tiny config.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup defined(ARCH_HAS_MEMREMAP_COMPAT_ALIGN), which needs CONFIG.
Fix radix_enabled() use in setup_initial_memory_limit(). Add some
stubs to reduce number of ifdefs.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-18-npiggin@gmail.com
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmExXHoVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGAZwP/iHdEZzuQ4cz2uXUaV0fevj9jjPU
zJ8wrrNabAiT6f5x861DsARQSR4OSt3zN0tyBNgZwUdotbe7ED5GegrgIUBMWlML
QskhTEIZj7TexAX/20vx671gtzI3JzFg4c9BuriXCFRBvychSevdJPr65gMDOesL
vOJnXe+SGXG2+fPWi/PxrcOItNRcveqo2GiWHT3g0Cv/DJUulu81gEkz3hrufnMR
cjMeSkV0nJJcvI755OQBOUnEuigW64k4m2WxHPG24tU8cQOCqV6lqwOfNQBAn4+F
OoaCMyPQT9gvGYwGExQMCXGg0wbUt1qnxzOVoA2qFCwbo+MFhqjBvPXab6VJm7CE
mY3RrTtvxSqBdHI6EGcYeLjhycK9b+LLoJ1qc3S9FK8It6NoFFp4XV0R6ItPBls7
mWi9VSpyI6k0AwLq+bGXEHvaX/bnnf/vfqn8H+w6mRZdXjFV8EB2DiOSRX/OqjVG
RnvTtXzWWThLyXvWR3Jox4+7X6728oL7akLemoeZI6oTbJDm7dQgwpz5HbSyHXLh
d+gUF3Y/6lqxT5N9GSVDxpD1bEMh2I7nGQ4M7WGbGas/3yUemF8wbBqGQo4a+YeD
d9vGAUxDp2PQTtL2sjFo5Gd4PZEM9g7vwWzRvHe0o5NxKEXcBg25b8cD1hxrN9Y4
Y1AAnc0kLO+My3PC
=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
This fixes a compile error with W=1.
arch/powerpc/kernel/prom.c: In function ‘early_reserve_mem’:
arch/powerpc/kernel/prom.c:625:10: error: variable ‘reserve_map’ set but not used [-Werror=unused-but-set-variable]
__be64 *reserve_map;
^~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210823090039.166120-2-clg@kaod.org
Delete/fixup few includes in anticipation of global -isystem compile
option removal.
Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition
of uintptr_t error (one definition comes from <stddef.h>, another from
<linux/types.h>).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
klimit is a global variable initialised at build time with the
value of _end.
This variable is never modified, so _end symbol can be used directly.
Remove klimit.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9fa9ba6807c17f93f35a582c199c646c4a8bfd9c.1622800638.git.christophe.leroy@csgroup.eu
On systems with large CPUs per node, even with the filtered matching of
related CPUs, there can be large number of calls to cpu_to_chip_id for
the same CPU. For example with 4096 vCPU, 1 node QEMU configuration,
with 4 threads per core, system could be see upto 1024 calls to
cpu_to_chip_id() for the same CPU. On a given system, cpu_to_chip_id()
for a given CPU would always return the same. Hence cache the result in
a lookup table for use in subsequent calls.
Since all CPUs sharing the same core will belong to the same chip, the
lookup_table has an entry for one CPU per core. chip_id_lookup_table is
not being freed and would be used on subsequent CPU online post CPU
offline.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-4-srikar@linux.vnet.ibm.com
If identical_pvr_fixup() is not inlined, there are two modpost warnings:
WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.
WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.
identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit 889b3c1245 ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 14b3d926a2 ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
MAX_PHYSMEM #define is used along with sparsemem to determine the SECTION_SHIFT
value. Powerpc also uses the same value to limit the max memory enabled on the
system. With 4K PAGE_SIZE and hash translation mode, we want to limit the max
memory enabled to 64TB due to page table size restrictions. However, with
radix translation, we don't have these restrictions. Hence split the radix
and hash MA_PHYSMEM limit and use different limit for each of them.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200608070904.387440-4-aneesh.kumar@linux.ibm.com
Currently, numa & prom are the only users of drmem LMB walk code.
Loading kdump with kexec_file also needs to walk the drmem LMBs to
setup the usable memory ranges for kdump kernel. But there are couple
of issues in using the code as is. One, walk_drmem_lmb() code is built
into the .init section currently, while kexec_file needs it later.
Two, there is no scope to pass data to the callback function for
processing and/or erroring out on certain conditions.
Fix that by, moving drmem LMB walk code out of .init section, adding
scope to pass data to the callback function and bailing out when an
error is encountered in the callback function.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602282727.575379.3979857013827701828.stgit@hbathini
As per the PAPR, bit 0 of byte 64 in pa-features property indicates
availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Host generally uses "cpu-features",
which masks "pa-features". But "cpu-features" are still not used for
guests and thus this change is mostly applicable for guests only.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-7-ravi.bangoria@linux.ibm.com
Parse storage keys related device tree entry in early_init_devtree
and enable MMU feature MMU_FTR_PKEY if pkeys are supported.
MMU feature is used instead of CPU feature because this enables us
to group MMU_FTR_KUAP and MMU_FTR_PKEY in asm feature fixup code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-14-aneesh.kumar@linux.ibm.com
When '029ab30b4c0a ("powerpc/mm: Enable radix GTSE only if supported.")'
made GTSE an MMU feature, it was enabled by default in
powerpc-cpu-features but was missed in pa-features. This causes random
memory corruption during boot of PowerNV kernels where
CONFIG_PPC_DT_CPU_FTRS isn't enabled.
Fixes: 029ab30b4c ("powerpc/mm: Enable radix GTSE only if supported.")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[mpe: Unwrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200720044258.863574-1-bharata@linux.ibm.com
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At boot the FSCR is initialised via one of two paths. On most systems
it's set to a hard coded value in __init_FSCR().
On newer skiboot systems we use the device tree CPU features binding,
where firmware can tell Linux what bits to set in FSCR (and HFSCR).
In both cases the value that's configured at boot is not propagated
into the init_task.thread.fscr value prior to the initial fork of init
(pid 1), which means the value is not used by any processes other than
swapper (the idle task).
For the __init_FSCR() case this is OK, because the value in
init_task.thread.fscr is initialised to something sensible. However it
does mean that the value set in __init_FSCR() is not used other than
for swapper, which is odd and confusing.
The bigger problem is for the device tree CPU features case it
prevents firmware from setting (or clearing) FSCR bits for use by user
space. This means all existing kernels can not have features
enabled/disabled by firmware if those features require
setting/clearing FSCR bits.
We can handle both cases by saving the FSCR value into
init_task.thread.fscr after we have initialised it at boot. This fixes
the bug for device tree CPU features, and will allow us to simplify
the initialisation for the __init_FSCR() case in a future patch.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-3-mpe@ellerman.id.au
While providing guests, it's desirable to resize it's memory on demand.
By now, it's possible to do so by creating a guest with a small base
memory, hot-plugging all the rest, and using 'movable_node' kernel
command-line parameter, which puts all hot-plugged memory in
ZONE_MOVABLE, allowing it to be removed whenever needed.
But there is an issue regarding guest reboot:
If memory is hot-plugged, and then the guest is rebooted, all hot-plugged
memory goes to ZONE_NORMAL, which offers no guaranteed hot-removal.
It usually prevents this memory to be hot-removed from the guest.
It's possible to use device-tree information to fix that behavior, as
it stores flags for LMB ranges on ibm,dynamic-memory-vN.
It involves marking each memblock with the correct flags as hotpluggable
memory, which mm/memblock.c puts in ZONE_MOVABLE during boot if
'movable_node' is passed.
For carrying such information, the new flag DRCONF_MEM_HOTREMOVABLE was
proposed and accepted into Power Architecture documentation.
This flag should be:
- true (b=1) if the hypervisor may want to hot-remove it later, and
- false (b=0) if it does not care.
During boot, guest kernel reads the device-tree, early_init_drmem_lmb()
is called for every added LMBs. Here, checking for this new flag and
marking memblocks as hotplugable memory is enough to get the desirable
behavior.
This should cause no change if 'movable_node' parameter is not passed
in kernel command-line.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402195156.626430-1-leonardo@linux.ibm.com
Add a new kernel config option, CONFIG_PRESERVE_FA_DUMP that ensures
that crash data, from previously crash'ed kernel, is preserved. This
helps in cases where FADump is not enabled but the subsequent memory
preserving kernel boot is likely to process this crash data. One
typical usecase for this config option is petitboot kernel.
As OPAL allows registering address with it in the first kernel and
retrieving it after MPIPL, use it to store the top of boot memory.
A kernel that intends to preserve crash data retrieves it and avoids
using memory beyond this address.
Move arch_reserved_kernel_pages() function as it is needed for both
FA_DUMP and PRESERVE_FA_DUMP configurations.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821375751.5656.11459483669542541602.stgit@hbathini.in.ibm.com
