Charlie Jenkins <charlie@rivosinc.com> says:
This series contains two minor fixes for the extension parsing in
cpufeature.c.
Some T-Head boards without vector 1.0 support report "v" in the isa
string in their DT which will cause the kernel to run vector code. The
code to blacklist "v" from these boards was doing so by using
riscv_cached_mvendorid() which has not been populated at the time of
extension parsing. This fix instead greedily reads the mvendorid CSR of
the boot hart to determine if the cpu is from T-Head.
The other fix is for an incorrect indexing bug. riscv extensions
sometimes imply other extensions. When adding these "subset" extensions
to the hardware capabilities array, they need to be checked if they are
valid. The current code only checks if the extension that is including
other extensions is valid and not the subset extensions.
These patches were previously included in:
https://lore.kernel.org/lkml/20240420-dev-charlie-support_thead_vector_6_9-v3-0-67cff4271d1d@rivosinc.com/
* b4-shazam-merge:
riscv: cpufeature: Fix extension subset checking
riscv: cpufeature: Fix thead vector hwcap removal
Link: https://lore.kernel.org/r/20240502-cpufeature_fixes-v4-0-b3d1a088722d@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for byte/half-word compare-and-exchange, emulated via LR/SC
loops.
* Support for Rust.
* Support for Zihintpause in hwprobe.
* Support for the PR_RISCV_SET_ICACHE_FLUSH_CTX prctl().
* Support for lockless lockrefs.
-----BEGIN PGP SIGNATURE-----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=YLoD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
The riscv_cpuinfo struct that contains mvendorid and marchid is not
populated until all harts are booted which happens after the DT parsing.
Use the mvendorid/marchid from the boot hart to determine if the DT
contains an invalid V.
Fixes: d82f32202e ("RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs")
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240502-cpufeature_fixes-v4-1-b3d1a088722d@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
An IPI backend is always required in an SMP configuration, but an SBI
implementation is not. For example, SBI will be unavailable when the
kernel runs in M mode. For this reason, consider IPI delivery of cache
and TLB flushes to be the base case, and any other implementation (such
as the SBI remote fence extension) to be an optimization.
Generally, if IPIs can be delivered without firmware assistance, they
are assumed to be faster than SBI calls due to the SBI context switch
overhead. However, when SBI is used as the IPI backend, then the context
switch cost must be paid anyway, and performing the cache/TLB flush
directly in the SBI implementation is more efficient than injecting an
interrupt to S-mode. This is the only existing scenario where
riscv_ipi_set_virq_range() is called with use_for_rfence set to false.
sbi_ipi_init() already checks riscv_ipi_have_virq_range(), so it only
calls riscv_ipi_set_virq_range() when no other IPI device is available.
This allows moving the static key and dropping the use_for_rfence
parameter. This decouples the static key from the irqchip driver probe
order.
Furthermore, the static branch only makes sense when CONFIG_RISCV_SBI is
enabled. Optherwise, IPIs must be used. Add a fallback definition of
riscv_use_sbi_for_rfence() which handles this case and removes the need
to check CONFIG_RISCV_SBI elsewhere, such as in cacheflush.c.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327045035.368512-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
As per the SBI specification, minor version is encoded in the
lower 24 bits only. Make sure that the SBI version is computed
with the appropriate mask.
Currently, there is no minor version in use. Thus, it doesn't
change anything functionality but it is good to be compliant with
the specification.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-8-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI_STA_SHMEM_DISABLE is a macro to invoke disable shared memory
commands. As this can be invoked from other SBI extension context
as well, rename it to more generic name as SBI_SHMEM_DISABLE.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-7-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI PMU Snapshot function optimizes the number of traps to
higher privilege mode by leveraging a shared memory between the S/VS-mode
and the M/HS mode. Add the definitions for that extension and new error
codes.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-6-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
It is a good practice to use BIT() instead of (1 << x).
Replace the current usages with BIT().
Take this opportunity to replace few (1UL << x) with BIT() as well
for consistency.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-5-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI v2.0 added another function to SBI PMU extension to read
the upper bits of a counter with width larger than XLEN.
Add the definition for that function.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-3-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
This includes everything from part 2:
* Support for tuning for systems with fast misaligned accesses.
* Support for SBI-based suspend.
* Support for the new SBI debug console extension.
* The T-Head CMOs now use PA-based flushes.
* Support for enabling the V extension in kernel code.
* Optimized IP checksum routines.
* Various ftrace improvements.
* Support for archrandom, which depends on the Zkr extension.
and then also a fix for those:
* The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
-----BEGIN PGP SIGNATURE-----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=Sjhj
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
Anup Patel <apatel@ventanamicro.com> says:
The SBI v2.0 specification is now frozen. The SBI v2.0 specification defines
SBI debug console (DBCN) extension which replaces the legacy SBI v0.1
functions sbi_console_putchar() and sbi_console_getchar().
(Refer v2.0-rc5 at https://github.com/riscv-non-isa/riscv-sbi-doc/releases)
This series adds support for SBI debug console (DBCN) extension in
Linux RISC-V.
To try these patches with KVM RISC-V, use KVMTOOL from the
riscv_zbx_zicntr_smstateen_condops_v1 branch at:
https://github.com/avpatel/kvmtool.git
* b4-shazam-merge:
RISC-V: Enable SBI based earlycon support
tty: Add SBI debug console support to HVC SBI driver
tty/serial: Add RISC-V SBI debug console based earlycon
RISC-V: Add SBI debug console helper routines
RISC-V: Add stubs for sbi_console_putchar/getchar()
Link: https://lore.kernel.org/r/20231124070905.1043092-1-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When the SUSP SBI extension is present it implies that the standard
"suspend to RAM" type is available. Wire it up to the generic
platform suspend support, also applying the already present support
for non-retentive CPU suspend. When the kernel is built with
CONFIG_SUSPEND, one can do 'echo mem > /sys/power/state' to suspend.
Resumption will occur when a platform-specific wake-up event arrives.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231206110807.35882-4-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Let us provide SBI debug console helper routines which can be
shared by serial/earlycon-riscv-sbi.c and hvc/hvc_riscv_sbi.c.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231124070905.1043092-3-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The functions sbi_console_putchar() and sbi_console_getchar() are
not defined when CONFIG_RISCV_SBI_V01 is disabled so let us add
stub of these functions to avoid "#ifdef" on user side.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231124070905.1043092-2-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for handling misaligned accesses in S-mode.
* Probing for misaligned access support is now properly cached and
handled in parallel.
* PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions.
* Performance improvements for TLB flushing.
* Support for many new relocations in the module loader.
* Various bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=NhdR
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for handling misaligned accesses in S-mode
- Probing for misaligned access support is now properly cached and
handled in parallel
- PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions
- Performance improvements for TLB flushing
- Support for many new relocations in the module loader
- Various bug fixes and cleanups
* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
riscv: Optimize bitops with Zbb extension
riscv: Rearrange hwcap.h and cpufeature.h
drivers: perf: Do not broadcast to other cpus when starting a counter
drivers: perf: Check find_first_bit() return value
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
RISC-V: Probe misaligned access speed in parallel
RISC-V: Remove __init on unaligned_emulation_finish()
RISC-V: Show accurate per-hart isa in /proc/cpuinfo
RISC-V: Don't rely on positional structure initialization
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
riscv: split cache ops out of dma-noncoherent.c
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
...
Currently, when the range to flush covers more than one page (a 4K page or
a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole
tlb comes with a greater cost than flushing a single entry so we should
flush single entries up to a certain threshold so that:
threshold * cost of flushing a single entry < cost of flushing the whole
tlb.
Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We add SBI debug console extension related defines/enum to the
asm/sbi.h header.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes: b9dcd9e415 ("RISC-V: Add basic support for SBI v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, the RISC-V kernel provides arch specific hooks (i.e.
struct riscv_ipi_ops) to register IPI handling methods. The stats
gathering of IPIs is also arch specific in the RISC-V kernel.
Other architectures (such as ARM, ARM64, and MIPS) have moved away
from custom arch specific IPI handling methods. Currently, these
architectures have Linux irqchip drivers providing a range of Linux
IRQ numbers to be used as IPIs and IPI triggering is done using
generic IPI APIs. This approach allows architectures to treat IPIs
as normal Linux IRQs and IPI stats gathering is done by the generic
Linux IRQ subsystem.
We extend the RISC-V IPI handling as-per above approach so that arch
specific IPI handling methods (struct riscv_ipi_ops) can be removed
and the IPI handling is done through the Linux IRQ subsystem.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-4-apatel@ventanamicro.com
This patch fixes/improve few minor things in SBI PMU extension
definition.
1. Align all the firmware event names.
2. Add macros for bit positions in cache event ID & ops.
The changes were small enough to combine them together instead
of creating 1 liner patches.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
sbi_get_mvendorid(), sbi_get_marchid() and sbi_get_mimpid() might get
called multiple times, though the values of these CSRs should not change
during the runtime of a specific machine.
Though the values can be different depending on which hart of the system
they get called. So hook into the newly introduced cpuinfo struct to allow
retrieving these cached values via new functions.
Also use arch_initcall for the cpuinfo setup instead, as that now clearly
is "architecture specific initialization" and also makes these information
available slightly earlier.
[caching vendor ids]
Suggested-by: Atish Patra <atishp@atishpatra.org>
[using cpuinfo struct as cache]
Suggested-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/all/20221011231841.2951264-2-heiko@sntech.de/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fixed few typos and bit fields not aligned with the spec. Define other
related macros that will be useful in the future.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220711174632.4186047-6-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Counter info encoding format is defined by the SBI specificaiton.
KVM implementation of SBI PMU extension will also leverage this definition.
Move the definition to common sbi header file from the sbi pmu driver.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220711174632.4186047-5-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for Sv57-based virtual memory.
* Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
* An improved memmove() implementation.
* Support for the new Ssconfpmf and SBI PMU extensions, which allows for
a much more useful perf implementation on RISC-V systems.
* Support for restartable sequences.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmI96FcTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiQBFD/425+6xmoOru6Wiki3Ja0fqQToNrQyW
IbmE/8AxUP7UxMvJSNzvQm8deXgklzvmegXCtnjwZZins971vMzzDSI83k/zn8I7
m5thVC9z01BjodV+pvIp/44hS6FesolOLzkVHksX0Zh6h0iidrc34Qf5HrqvvNfN
CZ/4K1+E9ig5r9qZp4WdvocCXj+FzwF/30GjKoW9vwA599CEG/dCo+TNN9GKD6XS
k+xiUGwlIRA+kCLSPFCi7ev9XPr1tCmQB7uB8Igcvr7Y3mWl8HKfajQVXBnXNRC3
ifbDxpx1elJiLPyf7Rza8jIDwDhLQdxBiwPgDgP9h9R4x0uF4efq8PzLzFlFmaE+
9Z9thfykBb5dXYDFDje9bAOXvKnGk7Iqxdsz0qWo/ChEQawX1+11bJb0TNN8QTT9
YvlQfUXgb1dmEcj5yG2uVE1Y8L7YNLRMsZU3W3FbmPJZoavSOuU4x0yCGeLyv597
76af3nuBJ5v80Db97gu6St+HIACeevKflsZUf/8GS/p7d1DlvmrWzQUMEycxPTG9
UZpZak58jh7AqQ9JbLnavhwmeacY50vpZOw6QHGAHSN+8daCPlOHDG7Ver7Z+kNj
+srJ7iKMvLnnaEjGNgavfxdqTOme1gv4LWs/JdHYMkpphqVN92xBDJnhXTPRVZiQ
0x39vK86qtB46A==
=Omc6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for Sv57-based virtual memory.
- Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
- An improved memmove() implementation.
- Support for the new Ssconfpmf and SBI PMU extensions, which allows
for a much more useful perf implementation on RISC-V systems.
- Support for restartable sequences.
* tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits)
rseq/selftests: Add support for RISC-V
RISC-V: Add support for restartable sequence
MAINTAINERS: Add entry for RISC-V PMU drivers
Documentation: riscv: Remove the old documentation
RISC-V: Add sscofpmf extension support
RISC-V: Add perf platform driver based on SBI PMU extension
RISC-V: Add RISC-V SBI PMU extension definitions
RISC-V: Add a simple platform driver for RISC-V legacy perf
RISC-V: Add a perf core library for pmu drivers
RISC-V: Add CSR encodings for all HPMCOUNTERS
RISC-V: Remove the current perf implementation
RISC-V: Improve /proc/cpuinfo output for ISA extensions
RISC-V: Do no continue isa string parsing without correct XLEN
RISC-V: Implement multi-letter ISA extension probing framework
RISC-V: Extract multi-letter extension names from "riscv, isa"
RISC-V: Minimal parser for "riscv, isa" strings
RISC-V: Correctly print supported extensions
riscv: Fixed misaligned memory access. Fixed pointer comparison.
MAINTAINERS: update riscv/microchip entry
riscv: dts: microchip: add new peripherals to icicle kit device tree
...
This patch adds all the definitions defined by the SBI PMU extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We add defines related to SBI HSM suspend call and also update HSM states
naming as-per the latest SBI specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, SBI APIs accept a hartmask that is generated from struct
cpumask. Cpumask data structure can hold upto NR_CPUs value. Thus, it
is not the correct data structure for hartids as it can be higher
than NR_CPUs for platforms with sparse or discontguous hartids.
Remove all association between hartid mask and struct cpumask.
Reviewed-by: Anup Patel <anup@brainfault.org> (For Linux RISC-V changes)
Acked-by: Anup Patel <anup@brainfault.org> (For KVM RISC-V changes)
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for the DA9063 as used on the HiFive Unmatched.
* Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
* A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
* Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
* A handful of fixes and cleanups, including to the defconfigs and
device trees.
---
This time I do expect to have a part 2, as there's still some smaller
patches on the list. I was hoping to get through more of that over the
weekend, but I got distracted with the ABI issues. Figured it's better
to send this sooner rather than waiting.
Included are my merge resolutions against a master from this morning, if
that helps any:
diff --cc arch/riscv/include/asm/sbi.h
index 289621da4a2a,9c46dd3ff4a2..000000000000
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@@ -27,7 -27,14 +27,15 @@@ enum sbi_ext_id
SBI_EXT_IPI = 0x735049,
SBI_EXT_RFENCE = 0x52464E43,
SBI_EXT_HSM = 0x48534D,
+ SBI_EXT_SRST = 0x53525354,
+
+ /* Experimentals extensions must lie within this range */
+ SBI_EXT_EXPERIMENTAL_START = 0x08000000,
+ SBI_EXT_EXPERIMENTAL_END = 0x08FFFFFF,
+
+ /* Vendor extensions must lie within this range */
+ SBI_EXT_VENDOR_START = 0x09000000,
+ SBI_EXT_VENDOR_END = 0x09FFFFFF,
};
enum sbi_ext_base_fid {
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index e03a4c94cf3f..6bfa1f24d3de 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -188,14 +188,6 @@ vdd_ldo11: ldo11 {
regulator-always-on;
};
};
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- wdt {
- compatible = "dlg,da9063-watchdog";
- };
};
};
-----BEGIN PGP SIGNATURE-----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=uqtf
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the DA9063 as used on the HiFive Unmatched.
- Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
- A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
- Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
- A handful of fixes and cleanups, including to the defconfigs and
device trees.
* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
RISC-V: Use SBI SRST extension when available
riscv: mm: fix wrong phys_ram_base value for RV64
RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
riscv: errata: alternative: mark vendor_patch_func __initdata
riscv: head: make secondary_start_common() static
riscv: remove cpu_stop()
riscv: try to allocate crashkern region from 32bit addressible memory
riscv: use hart id instead of cpu id on machine_kexec
riscv: Don't use va_pa_offset on kdump
riscv: dts: sifive: fu540-c000: Fix PLIC node
riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
riscv: dts: sifive: Group tuples in register properties
riscv: dts: sifive: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Fix clock controller node
riscv: dts: microchip: mpfs: Fix reference clock node
riscv: dts: microchip: mpfs: Fix PLIC node
riscv: dts: microchip: mpfs: Drop empty chosen node
riscv: dts: canaan: Group tuples in interrupt properties
...
The SBI SRST extension provides a standard way to poweroff and
reboot the system irrespective to whether Linux RISC-V S-mode
is running natively (HS-mode) or inside Guest/VM (VS-mode).
The SBI SRST extension is available in the SBI v0.3 specification.
(Refer, https://github.com/riscv/riscv-sbi-doc/releases/tag/v0.3.0-rc1)
This patch extends Linux RISC-V SBI implementation to detect
and use SBI SRST extension.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
SBI HSM extension allows OS to start/stop harts any time. It also allows
ordered booting of harts instead of random booting.
Implement SBI HSM exntesion and designate the vcpu 0 as the boot vcpu id.
All other non-zero non-booting vcpus should be brought up by the OS
implementing HSM extension. If the guest OS doesn't implement HSM
extension, only single vcpu will be available to OS.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
SBI v0.2 base extension defined to allow backward compatibility and
probing of future extensions. This is also the only mandatory SBI
extension that must be implemented by SBI implementors.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
* Support for the memtest= kernel command-line argument.
* Support for building the kernel with FORTIFY_SOURCE.
* Support for generic clockevent broadcasts.
* Support for the buildtar build target.
* Some build system cleanups to pass more LLVM-friendly arguments.
* Support for kprobes.
* A rearranged kernel memory map, the first part of supporting sv48
systems.
* Improvements to kexec, along with support for kdump and crash kernels.
* An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
* Support for XIP.
* A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
Along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
-----BEGIN PGP SIGNATURE-----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=PsA8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the memtest= kernel command-line argument.
- Support for building the kernel with FORTIFY_SOURCE.
- Support for generic clockevent broadcasts.
- Support for the buildtar build target.
- Some build system cleanups to pass more LLVM-friendly arguments.
- Support for kprobes.
- A rearranged kernel memory map, the first part of supporting sv48
systems.
- Improvements to kexec, along with support for kdump and crash
kernels.
- An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
- Support for XIP.
- A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
... along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
* tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits)
RISC-V: Always define XIP_FIXUP
riscv: Remove 32b kernel mapping from page table dump
riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
RISC-V: Enable Microchip PolarFire ICICLE SoC
RISC-V: Initial DTS for Microchip ICICLE board
dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC
RISC-V: Add Microchip PolarFire SoC kconfig option
RISC-V: enable XIP
RISC-V: Add crash kernel support
RISC-V: Add kdump support
RISC-V: Improve init_resources()
RISC-V: Add kexec support
RISC-V: Add EM_RISCV to kexec UAPI header
riscv: vdso: fix and clean-up Makefile
riscv/mm: Use BUG_ON instead of if condition followed by BUG.
riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU
riscv: module: Create module allocations without exec permissions
riscv: bpf: Avoid breaking W^X
...
Add 3 wrapper functions to get vendor id, architecture id and implement id
from M-mode
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
SBI v0.2 functions can return an error code from SBI implementation.
We are already processing the SBI error code and coverts it to the Linux
error code.
Propagate to the error code to the caller as well. As of now, kvm is the
only user of these error codes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Fix sbi_init() function declaration mismatch between RISCV_SBI
enable and disable, as it always returned 0, make it void function.
Drop some stubs which won't be used if RISCV_SBI disabled.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
SBI specification defines HSM extension that allows to start/stop a hart
by a supervisor anytime. The specification is available at
https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc
Add those definitions here.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
All SBI related extensions will not be implemented in sbi.c to avoid
bloating. Thus, sbi_err_map_linux_errno() will be used in other files
implementing that specific extension.
Export the function so that it can be used later.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2
calling convention.
Implement the replacement extensions and few additional new SBI function calls
that makes way for a better SBI interface in future.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We now have SBI v0.2 which is more scalable and extendable to handle
future needs for RISC-V supervisor interfaces.
Introduce a new config and move all SBI v0.1 code under that config.
This allows to implement the new replacement SBI extensions cleanly
and remove v0.1 extensions easily in future. Currently, the config
is enabled by default. Once all M-mode software, with v0.1, is no
longer in use, this config option and all relevant code can be easily
removed.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Few v0.1 SBI calls are being replaced by new SBI calls that follows
v0.2 calling convention.
This patch just defines these new extensions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The SBI v0.2 introduces a base extension which is backward compatible
with v0.1. Implement all helper functions and minimum required SBI
calls from v0.2 for now. All other base extension function will be
added later as per need.
As v0.2 calling convention is backward compatible with v0.1, remove
the v0.1 helper functions and just use v0.2 calling convention.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
As per the new SBI specification, current SBI implementation version
is defined as 0.1 and will be removed/replaced in future. Each of the
function call in 0.1 is defined as a separate extension which makes
easier to replace them one at a time.
Rename existing implementation to reflect that. This patch is just
a preparatory patch for SBI v0.2 and doesn't introduce any functional
changes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
RISC-V has the concept of a cpu level interrupt controller. The
interface for it is split between a standardized part that is exposed
as bits in the mstatus/sstatus register and the mie/mip/sie/sip
CRS. But the bit to actually trigger IPIs is not standardized and
just mentioned as implementable using MMIO.
Add support for IPIs using MMIO using the SiFive clint layout (which
is also shared by Ariane, Kendryte and the Qemu virt platform).
Additionally the MMIO block also supports the time value and timer
compare registers, so they are also set up using the same OF node.
Support for other layouts should also be relatively easy to add in the
future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: update include guard format; fix checkpatch
issues; minor commit message cleanup]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
When running in M-mode we can't use the SBI to set the timer, and
don't have access to the time CSR as that usually is emulated by
M-mode. Instead provide code that directly accesses the MMIO for
the timer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource
[paul.walmsley@sifive.com: updated to apply; fixed checkpatch
issue; timex.h now includes asm/mmio.h to resolve header file
problems]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The RISC-V ISA only supports flushing the instruction cache for the
local CPU core. Currently we always offload the remote TLB flushing to
the SBI, which then issues an IPI under the hoods. But with M-mode
we do not have an SBI so we have to do it ourselves. IPI to the
other nodes using the existing kernel helpers instead if we have
native clint support and thus can IPI directly from the kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: cleaned up code comment]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
There is no SBI when we run in M-mode, so fail the compile for any code
trying to use SBI calls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 this program is distributed
in the hope that it will be useful but without any warranty without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more
details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 97 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.025053186@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently sbi_remote_sfence_vma{,_asid} does not pass their arguments
to SBI at all, which is semantically incorrect.
Neither BBL nor OpenSBI is using these arguments at the moment, and
they just do a global flush instead. However we still need to provide
correct arguments.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
