The only remaining use of the trampoline address by the trampoline
itself is deriving the page table address from it, and this involves
adding an offset of 0x0. So simplify this, and pass the new CR3 value
directly.
This makes the fact that the page table happens to be at the start of
the trampoline allocation an implementation detail of the caller.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-15-ardb@kernel.org
The 32-bit trampoline no longer uses the stack for anything except
performing a far return back to long mode, and preserving the caller's
stack pointer value. Currently, the trampoline stack is placed in the
same page that carries the trampoline code, which means this page must
be mapped writable and executable, and the stack is therefore executable
as well.
Replace the far return with a far jump, so that the return address can
be pre-calculated and patched into the code before it is called. This
removes the need for a 32-bit addressable stack entirely, and in a later
patch, this will be taken advantage of by removing writable permissions
from (and adding executable permissions to) the trampoline code page
when booting via the EFI stub.
Note that the value of RSP still needs to be preserved explicitly across
the switch into 32-bit mode, as the register may get truncated to 32
bits.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-12-ardb@kernel.org
Update the trampoline code so its arguments are passed via RDI and RSI,
which matches the ordinary SysV calling convention for x86_64. This will
allow this code to be called directly from C.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-11-ardb@kernel.org
Move the long return to switch to 32-bit mode into the trampoline code
so it can be called as an ordinary function. This will allow it to be
called directly from C code in a subsequent patch.
While at it, reorganize the code somewhat to keep the prologue and
epilogue of the function together, making the code a bit easier to
follow. Also, given that the trampoline is now entered in 64-bit mode, a
simple RIP-relative reference can be used to take the address of the
exit point.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-10-ardb@kernel.org
There are a few MSRs and control register bits that the kernel
normally needs to modify during boot. But, TDX disallows
modification of these registers to help provide consistent security
guarantees. Fortunately, TDX ensures that these are all in the correct
state before the kernel loads, which means the kernel does not need to
modify them.
The conditions to avoid are:
* Any writes to the EFER MSR
* Clearing CR4.MCE
This theoretically makes the guest boot more fragile. If, for instance,
EFER was set up incorrectly and a WRMSR was performed, it will trigger
early exception panic or a triple fault, if it's before early
exceptions are set up. However, this is likely to trip up the guest
BIOS long before control reaches the kernel. In any case, these kinds
of problems are unlikely to occur in production environments, and
developers have good debug tools to fix them quickly.
Change the common boot code to work on TDX and non-TDX systems.
This should have no functional effect on non-TDX systems.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-24-kirill.shutemov@linux.intel.com
In some old AMD KVM implementation, guest's EFER.LME bit is cleared by KVM
when the hypervsior detects that the guest sets CR0.PG to 0. This causes
the guest OS to reboot when it tries to return from 32-bit trampoline code
because the CPU is in incorrect state: CR4.PAE=1, CR0.PG=1, CS.L=1, but
EFER.LME=0. As a precaution, set EFER.LME=1 as part of long mode
activation procedure. This extra step won't cause any harm when Linux is
booted on a bare-metal machine.
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20190104054411.12489-1-wei@redhat.com
If a bootloader enables 64-bit mode with 4-level paging, we might need to
switch over to 5-level paging. The switching requires the disabling of
paging, which works fine if kernel itself is loaded below 4G.
But if the bootloader puts the kernel above 4G (not sure if anybody does
this), we would lose control as soon as paging is disabled, because the
code becomes unreachable to the CPU.
To handle the situation, we need a trampoline in lower memory that would
take care of switching on 5-level paging.
This patch finds a spot in low memory for a trampoline.
The heuristic is based on code in reserve_bios_regions().
We find the end of low memory based on BIOS and EBDA start addresses.
The trampoline is put just before end of low memory. It's mimic approach
taken to allocate memory for realtime trampoline.
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
