Drop unnecessary MSR bitmap updates during nested transitions, as L1's
APIC_BASE MSR is not modified by the standard VM-Enter/VM-Exit flows,
and L2's MSR bitmap is managed separately. In the unlikely event that L1
is pathological and loads APIC_BASE via the VM-Exit load list, KVM will
handle updating the bitmap in its normal WRMSR flows.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-39-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the "internal" variants of setting segment registers when stuffing
state on nested VM-Exit in order to skip the "emulation required"
updates. VM-Exit must always go to protected mode, and all segments are
mostly hardcoded (to valid values) on VM-Exit. The bits of the segments
that aren't hardcoded are explicitly checked during VM-Enter, e.g. the
selector RPLs must all be zero.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set L1's LDTR on VM-Exit per the Intel SDM:
The host-state area does not contain a selector field for LDTR. LDTR is
established as follows on all VM exits: the selector is cleared to
0000H, the segment is marked unusable and is otherwise undefined
(although the base address is always canonical).
This is likely a benign bug since the LDTR is unusable, as it means the
L1 VMM is conditioned to reload its LDTR in order to function properly on
bare metal.
Fixes: 4704d0befb ("KVM: nVMX: Exiting from L2 to L1")
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand the comments for the MMU roles. The interactions with gfn_track
PGD reuse in particular are hairy.
Regarding PGD reuse, add comments in the nested virtualization flows to
call out why kvm_init_mmu() is unconditionally called even when nested
TDP is used.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-50-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mark #ACs that won't be reinjected to the guest as wanted by L0 so that
KVM handles split-lock #AC from L2 instead of forwarding the exception to
L1. Split-lock #AC isn't yet virtualized, i.e. L1 will treat it like a
regular #AC and do the wrong thing, e.g. reinject it into L2.
Fixes: e6f8b6c12f ("KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest")
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622172244.3561540-1-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the max VMCS index for vmcs12 by walking the array to find the
actual max index. Hardcoding the index is prone to bitrot, and the
calculation is only done on KVM bringup (albeit on every CPU, but there
aren't _that_ many null entries in the array).
Fixes: 3c0f99366e ("KVM: nVMX: Add a TSC multiplier field in VMCS12")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210618214658.2700765-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the explicit check on EPTP switching being enabled. The EPTP
switching check is handled in the generic VMFUNC function check, while
the underlying VMFUNC enablement check is done by hardware and redone
by generic VMFUNC emulation.
The vmcs12 EPT check is handled by KVM at VM-Enter in the form of a
consistency check, keep it but add a WARN.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN and inject #UD when emulating VMFUNC for L2 if the function is
out-of-bounds or if VMFUNC is not enabled in vmcs12. Neither condition
should occur in practice, as the CPU is supposed to prioritize the #UD
over VM-Exit for out-of-bounds input and KVM is supposed to enable
VMFUNC in vmcs02 if and only if it's enabled in vmcs12, but neither of
those dependencies is obvious.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the @reset_roots param from kvm_init_mmu(), the one user,
kvm_mmu_reset_context() has already unloaded the MMU and thus freed and
invalidated all roots. This also happens to be why the reset_roots=true
paths doesn't leak roots; they're already invalid.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use __kvm_mmu_new_pgd() via kvm_init_shadow_ept_mmu() to emulate
VMFUNC[EPTP_SWITCH] instead of nuking all MMUs. EPTP_SWITCH is the EPT
equivalent of MOV to CR3, i.e. is a perfect fit for the common PGD flow,
the only hiccup being that A/D enabling is buried in the EPTP. But, that
is easily handled by bouncing through kvm_init_shadow_ept_mmu().
Explicitly request a guest TLB flush if VPID is disabled. Per Intel's
SDM, if VPID is disabled, "an EPTP-switching VMFUNC invalidates combined
mappings associated with VPID 0000H (for all PCIDs and for all EP4TA
values, where EP4TA is the value of bits 51:12 of EPTP)".
Note, this technically is a very bizarre bug fix of sorts if L2 is using
PAE paging, as avoiding the full MMU reload also avoids incorrectly
reloading the PDPTEs, which the SDM explicitly states are not touched:
If PAE paging is in use, an EPTP-switching VMFUNC does not load the
four page-directory-pointer-table entries (PDPTEs) from the
guest-physical address in CR3. The logical processor continues to use
the four guest-physical addresses already present in the PDPTEs. The
guest-physical address in CR3 is not translated through the new EPT
paging structures (until some operation that would load the PDPTEs).
In addition to optimizing L2's MMU shenanigans, avoiding the full reload
also optimizes L1's MMU as KVM_REQ_MMU_RELOAD wipes out all roots in both
root_mmu and guest_mmu.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulating INVVPID for L1, free only L2+ roots, using the guest_mode
tag in the MMU role to identify L2+ roots. From L1's perspective, its
own TLB entries use VPID=0, and INVVPID is not requied to invalidate such
entries. Per Intel's SDM, INVVPID _may_ invalidate entries with VPID=0,
but it is not required to do so.
Cc: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the dedicated nested_vmx_transition_mmu_sync() now that the MMU sync
is handled via KVM_REQ_TLB_FLUSH_GUEST, and fold that flush into the
all-encompassing nested_vmx_transition_tlb_flush().
Opportunistically add a comment explaning why nested EPT never needs to
sync the MMU on VM-Enter.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop skip_mmu_sync and skip_tlb_flush from __kvm_mmu_new_pgd() now that
all call sites unconditionally skip both the sync and flush.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop bogus logic that incorrectly clobbers the accessed/dirty enabling
status of the nested MMU on an EPTP switch. When nested EPT is enabled,
walk_mmu points at L2's _legacy_ page tables, not L1's EPT for L2.
This is likely a benign bug, as mmu->ept_ad is never consumed (since the
MMU is not a nested EPT MMU), and stuffing mmu_role.base.ad_disabled will
never propagate into future shadow pages since the nested MMU isn't used
to map anything, just to walk L2's page tables.
Note, KVM also does a full MMU reload, i.e. the guest_mmu will be
recreated using the new EPTP, and thus any change in A/D enabling will be
properly recognized in the relevant MMU.
Fixes: 41ab937274 ("KVM: nVMX: Emulate EPTP switching for the L1 hypervisor")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use BIT_ULL() instead of an open-coded shift to check whether or not a
function is enabled in L1's VMFUNC bitmap. This is a benign bug as KVM
supports only bit 0, and will fail VM-Enter if any other bits are set,
i.e. bits 63:32 are guaranteed to be zero.
Note, "function" is bounded by hardware as VMFUNC will #UD before taking
a VM-Exit if the function is greater than 63.
Before:
if ((vmcs12->vm_function_control & (1 << function)) == 0)
0x000000000001a916 <+118>: mov $0x1,%eax
0x000000000001a91b <+123>: shl %cl,%eax
0x000000000001a91d <+125>: cltq
0x000000000001a91f <+127>: and 0x128(%rbx),%rax
After:
if (!(vmcs12->vm_function_control & BIT_ULL(function & 63)))
0x000000000001a955 <+117>: mov 0x128(%rbx),%rdx
0x000000000001a95c <+124>: bt %rax,%rdx
Fixes: 27c42a1bb8 ("KVM: nVMX: Enable VMFUNC for the L1 hypervisor")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Trigger a full TLB flush on behalf of the guest on nested VM-Enter and
VM-Exit when VPID is disabled for L2. kvm_mmu_new_pgd() syncs only the
current PGD, which can theoretically leave stale, unsync'd entries in a
previous guest PGD, which could be consumed if L2 is allowed to load CR3
with PCID_NOFLUSH=1.
Rename KVM_REQ_HV_TLB_FLUSH to KVM_REQ_TLB_FLUSH_GUEST so that it can
be utilized for its obvious purpose of emulating a guest TLB flush.
Note, there is no change the actual TLB flush executed by KVM, even
though the fast PGD switch uses KVM_REQ_TLB_FLUSH_CURRENT. When VPID is
disabled for L2, vpid02 is guaranteed to be '0', and thus
nested_get_vpid02() will return the VPID that is shared by L1 and L2.
Generate the request outside of kvm_mmu_new_pgd(), as getting the common
helper to correctly identify which requested is needed is quite painful.
E.g. using KVM_REQ_TLB_FLUSH_GUEST when nested EPT is in play is wrong as
a TLB flush from the L1 kernel's perspective does not invalidate EPT
mappings. And, by using KVM_REQ_TLB_FLUSH_GUEST, nVMX can do future
simplification by moving the logic into nested_vmx_transition_tlb_flush().
Fixes: 41fab65e7c ("KVM: nVMX: Skip MMU sync on nested VMX transition when possible")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMCS12 is used to keep the authoritative state during nested state
migration. In case 'need_vmcs12_to_shadow_sync' flag is set, we're
in between L2->L1 vmexit and L1 guest run when actual sync to
enlightened (or shadow) VMCS happens. Nested state, however, has
no flag for 'need_vmcs12_to_shadow_sync' so vmx_set_nested_state()->
set_current_vmptr() always sets it. Enlightened vmptrld path, however,
doesn't have the quirk so some VMCS12 changes may not get properly
reflected to eVMCS and L1 will see an incorrect state.
Note, during L2 execution or when need_vmcs12_to_shadow_sync is not
set the change is effectively a nop: in the former case all changes
will get reflected during the first L2->L1 vmexit and in the later
case VMCS12 and eVMCS are already in sync (thanks to
copy_enlightened_to_vmcs12() in vmx_get_nested_state()).
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-11-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When nested state migration happens during L1's execution, it
is incorrect to modify eVMCS as it is L1 who 'owns' it at the moment.
At least genuine Hyper-V seems to not be very happy when 'clean fields'
data changes underneath it.
'Clean fields' data is used in KVM twice: by copy_enlightened_to_vmcs12()
and prepare_vmcs02_rare() so we can reset it from prepare_vmcs02() instead.
While at it, update a comment stating why exactly we need to reset
'hv_clean_fields' data from L0.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'need_vmcs12_to_shadow_sync' is used for both shadow and enlightened
VMCS sync when we exit to L1. The comment in nested_vmx_failValid()
validly states why shadow vmcs sync can be omitted but this doesn't
apply to enlightened VMCS as it 'shadows' all VMCS12 fields.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Clean fields' data from enlightened VMCS is only valid upon vmentry: L1
hypervisor is not obliged to keep it up-to-date while it is mangling L2's
state, KVM_GET_NESTED_STATE request may come at a wrong moment when actual
eVMCS changes are unsynchronized with 'hv_clean_fields'. As upon migration
VMCS12 is used as a source of ultimate truth, we must make sure we pick all
the changes to eVMCS and thus 'clean fields' data must be ignored.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike VMREAD/VMWRITE/VMPTRLD, VMCLEAR is a valid instruction when
enlightened VMCS is in use. TLFS has the following brief description:
"The L1 hypervisor can execute a VMCLEAR instruction to transition an
enlightened VMCS from the active to the non-active state". Normally,
this change can be ignored as unmapping active eVMCS can be postponed
until the next VMLAUNCH instruction but in case nested state is migrated
with KVM_GET_NESTED_STATE/KVM_SET_NESTED_STATE, keeping eVMCS mapped
may result in its synchronization with VMCS12 and this is incorrect:
L1 hypervisor is free to reuse inactive eVMCS memory for something else.
Inactive eVMCS after VMCLEAR can just be unmapped.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike regular set_current_vmptr(), nested_vmx_handle_enlightened_vmptrld()
can not be called directly from vmx_set_nested_state() as KVM may not have
all the information yet (e.g. HV_X64_MSR_VP_ASSIST_PAGE MSR may not be
restored yet). Enlightened VMCS is mapped later while getting nested state
pages. In the meantime, vmx->nested.hv_evmcs_vmptr remains 'EVMPTR_INVALID'
and it's indistinguishable from 'evmcs is not in use' case. This leads to
certain issues, in particular, if KVM_GET_NESTED_STATE is called right
after KVM_SET_NESTED_STATE, KVM_STATE_NESTED_EVMCS flag in the resulting
state will be unset (and such state will later fail to load).
Introduce 'EVMPTR_MAP_PENDING' state to detect not-yet-mapped eVMCS after
restore. With this, the 'is_guest_mode(vcpu)' hack in vmx_has_valid_vmcs12()
is no longer needed.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
copy_vmcs12_to_enlightened()/copy_enlightened_to_vmcs12() don't return any result,
make them return 'void'.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In theory, L1 can try to disable enlightened VMENTRY in VP assist page and
try to issue VMLAUNCH/VMRESUME. While nested_vmx_handle_enlightened_vmptrld()
properly handles this as 'EVMPTRLD_DISABLED', previously mapped eVMCS
remains mapped and thus all evmptr_is_valid() checks will still pass and
nested_vmx_run() will proceed when it shouldn't.
Release eVMCS immediately when we detect that enlightened vmentry was
disabled by L1.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'dirty_vmcs12' is only checked in prepare_vmcs02_early()/prepare_vmcs02()
and both checks look like:
'vmx->nested.dirty_vmcs12 || evmptr_is_valid(vmx->nested.hv_evmcs_vmptr)'
so for eVMCS case the flag changes nothing. Drop the assignment to avoid
the confusion.
No functional change intended.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of checking 'vmx->nested.hv_evmcs' use '-1' in
'vmx->nested.hv_evmcs_vmptr' to indicate 'evmcs is not in use' state. This
matches how we check 'vmx->nested.current_vmptr'. Introduce EVMPTR_INVALID
and evmptr_is_valid() and use it instead of raw '-1' check as a preparation
to adding other 'special' values.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
if new KVM_*_SREGS2 ioctls are used, the PDPTRs are
a part of the migration state and are correctly
restored by those ioctls.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to the rest of guest page accesses after a migration,
this access should be delayed to KVM_REQ_GET_NESTED_STATE_PAGES.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the pdptrs_changed() check when loading L2's CR3. The set of
available registers is always reset when switching VMCSes (see commit
e5d03de593, "KVM: nVMX: Reset register cache (available and dirty
masks) on VMCS switch"), thus the "are PDPTRs available" check will
always fail. And even if it didn't fail, reading guest memory to check
the PDPTRs is just as expensive as reading guest memory to load 'em.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210607090203.133058-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the 'nested_run' statistic counts all guest-entry attempts,
including those that fail during vmentry checks on Intel and during
consistency checks on AMD. Convert this statistic to count only those
guest-entries that make it past these state checks and make it to guest
code. This will tell us the number of guest-entries that actually executed
or tried to execute guest code.
Signed-off-by: Krish Sadhukhan <Krish.Sadhukhan@oracle.com>
Message-Id: <20210609180340.104248-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't allow posted interrupts to modify a stale posted interrupt
descriptor (including the initial value of 0).
Empirical tests on real hardware reveal that a posted interrupt
descriptor referencing an unbacked address has PCI bus error semantics
(reads as all 1's; writes are ignored). However, kvm can't distinguish
unbacked addresses from device-backed (MMIO) addresses, so it should
really ask userspace for an MMIO completion. That's overly
complicated, so just punt with KVM_INTERNAL_ERROR.
Don't return the error until the posted interrupt descriptor is
actually accessed. We don't want to break the existing kvm-unit-tests
that assume they can launch an L2 VM with a posted interrupt
descriptor that references MMIO space in L1.
Fixes: 6beb7bd52e ("kvm: nVMX: Refactor nested_get_vmcs12_pages()")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-8-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the kernel has no mapping for the vmcs02 virtual APIC page,
userspace MMIO completion is necessary to process nested posted
interrupts. This is not a configuration that KVM supports. Rather than
silently ignoring the problem, try to exit to userspace with
KVM_INTERNAL_ERROR.
Note that the event that triggers this error is consumed as a
side-effect of a call to kvm_check_nested_events. On some paths
(notably through kvm_vcpu_check_block), the error is dropped. In any
case, this is an incremental improvement over always ignoring the
error.
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-7-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional change intended.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the TSC offset and multiplier on nested transitions and expose
the TSC scaling feature to L1.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-11-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently vmx_vcpu_load_vmcs() writes the TSC_MULTIPLIER field of the
VMCS every time the VMCS is loaded. Instead of doing this, set this
field from common code on initialization and whenever the scaling ratio
changes.
Additionally remove vmx->current_tsc_ratio. This field is redundant as
vcpu->arch.tsc_scaling_ratio already tracks the current TSC scaling
ratio. The vmx->current_tsc_ratio field is only used for avoiding
unnecessary writes but it is no longer needed after removing the code
from the VMCS load path.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Message-Id: <20210607105438.16541-1-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When enlightened VMCS is in use and nested state is migrated with
vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs
page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr'
and we can't read it from VP assist page because userspace may decide
to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state
(and QEMU, for example, does exactly that). To make sure eVMCS is
mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES
request.
Commit f2c7ef3ba9 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to
nested_vmx_vmexit() to make sure MSR permission bitmap is not switched
when an immediate exit from L2 to L1 happens right after migration (caused
by a pending event, for example). Unfortunately, in the exact same
situation we still need to have eVMCS mapped so
nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS.
As a band-aid, restore nested_get_evmcs_page() when clearing
KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far
from being ideal as we can't easily propagate possible failures and even if
we could, this is most likely already too late to do so. The whole
'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration
seems to be fragile as we diverge too much from the 'native' path when
vmptr loading happens on vmx_set_nested_state().
Fixes: f2c7ef3ba9 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210503150854.1144255-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
Append raw to the direct variants of kvm_register_read/write(), and
drop the "l" from the mode-aware variants. I.e. make the mode-aware
variants the default, and make the direct variants scary sounding so as
to discourage use. Accessing the full 64-bit values irrespective of
mode is rarely the desired behavior.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop bits 63:32 of the base and/or index GPRs when calculating the
effective address of a VMX instruction memory operand. Outside of 64-bit
mode, memory encodings are strictly limited to E*X and below.
Fixes: 064aea7747 ("KVM: nVMX: Decoding memory operands of VMX instructions")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop bits 63:32 of the VMCS field encoding when checking for a nested
VM-Exit on VMREAD/VMWRITE in !64-bit mode. VMREAD and VMWRITE always
use 32-bit operands outside of 64-bit mode.
The actual emulation of VMREAD/VMWRITE does the right thing, this bug is
purely limited to incorrectly causing a nested VM-Exit if a GPR happens
to have bits 63:32 set outside of 64-bit mode.
Fixes: a7cde481b6 ("KVM: nVMX: Do not forward VMREAD/VMWRITE VMExits to L1 if required so by vmcs12 vmread/vmwrite bitmaps")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable pass-through of the FS and GS base MSRs for 32-bit KVM. Intel's
SDM unequivocally states that the MSRs exist if and only if the CPU
supports x86-64. FS_BASE and GS_BASE are mostly a non-issue; a clever
guest could opportunistically use the MSRs without issue. KERNEL_GS_BASE
is a bigger problem, as a clever guest would subtly be broken if it were
migrated, as KVM disallows software access to the MSRs, and unlike the
direct variants, KERNEL_GS_BASE needs to be explicitly migrated as it's
not captured in the VMCS.
Fixes: 25c5f225be ("KVM: VMX: Enable MSR Bitmap feature")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422023831.3473491-1-seanjc@google.com>
[*NOT* for stable kernels. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable SGX virtualization now that KVM has the VM-Exit handlers needed
to trap-and-execute ENCLS to ensure correctness and/or enforce the CPU
model exposed to the guest. Add a KVM module param, "sgx", to allow an
admin to disable SGX virtualization independent of the kernel.
When supported in hardware and the kernel, advertise SGX1, SGX2 and SGX
LC to userspace via CPUID and wire up the ENCLS_EXITING bitmap based on
the guest's SGX capabilities, i.e. to allow ENCLS to be executed in an
SGX-enabled guest. With the exception of the provision key, all SGX
attribute bits may be exposed to the guest. Guest access to the
provision key, which is controlled via securityfs, will be added in a
future patch.
Note, KVM does not yet support exposing ENCLS_C leafs or ENCLV leafs.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <a99e9c23310c79f2f4175c1af4c4cbcef913c3e5.1618196135.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for handling VM-Exits that originate from a guest SGX
enclave. In SGX, an "enclave" is a new CPL3-only execution environment,
wherein the CPU and memory state is protected by hardware to make the
state inaccesible to code running outside of the enclave. When exiting
an enclave due to an asynchronous event (from the perspective of the
enclave), e.g. exceptions, interrupts, and VM-Exits, the enclave's state
is automatically saved and scrubbed (the CPU loads synthetic state), and
then reloaded when re-entering the enclave. E.g. after an instruction
based VM-Exit from an enclave, vmcs.GUEST_RIP will not contain the RIP
of the enclave instruction that trigered VM-Exit, but will instead point
to a RIP in the enclave's untrusted runtime (the guest userspace code
that coordinates entry/exit to/from the enclave).
To help a VMM recognize and handle exits from enclaves, SGX adds bits to
existing VMCS fields, VM_EXIT_REASON.VMX_EXIT_REASON_FROM_ENCLAVE and
GUEST_INTERRUPTIBILITY_INFO.GUEST_INTR_STATE_ENCLAVE_INTR. Define the
new architectural bits, and add a boolean to struct vcpu_vmx to cache
VMX_EXIT_REASON_FROM_ENCLAVE. Clear the bit in exit_reason so that
checks against exit_reason do not need to account for SGX, e.g.
"if (exit_reason == EXIT_REASON_EXCEPTION_NMI)" continues to work.
KVM is a largely a passive observer of the new bits, e.g. KVM needs to
account for the bits when propagating information to a nested VMM, but
otherwise doesn't need to act differently for the majority of VM-Exits
from enclaves.
The one scenario that is directly impacted is emulation, which is for
all intents and purposes impossible[1] since KVM does not have access to
the RIP or instruction stream that triggered the VM-Exit. The inability
to emulate is a non-issue for KVM, as most instructions that might
trigger VM-Exit unconditionally #UD in an enclave (before the VM-Exit
check. For the few instruction that conditionally #UD, KVM either never
sets the exiting control, e.g. PAUSE_EXITING[2], or sets it if and only
if the feature is not exposed to the guest in order to inject a #UD,
e.g. RDRAND_EXITING.
But, because it is still possible for a guest to trigger emulation,
e.g. MMIO, inject a #UD if KVM ever attempts emulation after a VM-Exit
from an enclave. This is architecturally accurate for instruction
VM-Exits, and for MMIO it's the least bad choice, e.g. it's preferable
to killing the VM. In practice, only broken or particularly stupid
guests should ever encounter this behavior.
Add a WARN in skip_emulated_instruction to detect any attempt to
modify the guest's RIP during an SGX enclave VM-Exit as all such flows
should either be unreachable or must handle exits from enclaves before
getting to skip_emulated_instruction.
[1] Impossible for all practical purposes. Not truly impossible
since KVM could implement some form of para-virtualization scheme.
[2] PAUSE_LOOP_EXITING only affects CPL0 and enclaves exist only at
CPL3, so we also don't need to worry about that interaction.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <315f54a8507d09c292463ef29104e1d4c62e9090.1618196135.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Injected interrupts/nmi should not block a pending exception,
but rather be either lost if nested hypervisor doesn't
intercept the pending exception (as in stock x86), or be delivered
in exitintinfo/IDT_VECTORING_INFO field, as a part of a VMexit
that corresponds to the pending exception.
The only reason for an exception to be blocked is when nested run
is pending (and that can't really happen currently
but still worth checking for).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401143817.1030695-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix another ~42 single-word typos in arch/x86/ code comments,
missed a few in the first pass, in particular in .S files.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
Synthesize a nested VM-Exit if L2 triggers an emulated triple fault
instead of exiting to userspace, which likely will kill L1. Any flow
that does KVM_REQ_TRIPLE_FAULT is suspect, but the most common scenario
for L2 killing L1 is if L0 (KVM) intercepts a contributory exception that
is _not_intercepted by L1. E.g. if KVM is intercepting #GPs for the
VMware backdoor, a #GP that occurs in L2 while vectoring an injected #DF
will cause KVM to emulate triple fault.
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210302174515.2812275-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move KVM's CC() macro to x86.h so that it can be reused by nSVM.
Debugging VM-Enter is as painful on SVM as it is on VMX.
Rename the more visible macro to KVM_NESTED_VMENTER_CONSISTENCY_CHECK
to avoid any collisions with the uber-concise "CC".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210204000117.3303214-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Defer reloading the MMU after a EPTP successful EPTP switch. The VMFUNC
instruction itself is executed in the previous EPTP context, any side
effects, e.g. updating RIP, should occur in the old context. Practically
speaking, this bug is benign as VMX doesn't touch the MMU when skipping
an emulated instruction, nor does queuing a single-step #DB. No other
post-switch side effects exist.
Fixes: 41ab937274 ("KVM: nVMX: Emulate EPTP switching for the L1 hypervisor")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new per-cpu stat 'nested_run' is introduced in order to track if L1 VM
is running or used to run L2 VM.
An example of the usage of 'nested_run' is to help the host administrator
to easily track if any L1 VM is used to run L2 VM. Suppose there is issue
that may happen with nested virtualization, the administrator will be able
to easily narrow down and confirm if the issue is due to nested
virtualization via 'nested_run'. For example, whether the fix like
commit 88dddc11a8 ("KVM: nVMX: do not use dangling shadow VMCS after
guest reset") is required.
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20210305225747.7682-1-dongli.zhang@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, if enable_pml=1 PML remains enabled for the entire lifetime
of the VM irrespective of whether dirty logging is enable or disabled.
When dirty logging is disabled, all the pages of the VM are manually
marked dirty, so that PML is effectively non-operational. Setting
the dirty bits is an expensive operation which can cause severe MMU
lock contention in a performance sensitive path when dirty logging is
disabled after a failed or canceled live migration.
Manually setting dirty bits also fails to prevent PML activity if some
code path clears dirty bits, which can incur unnecessary VM-Exits.
In order to avoid this extra overhead, dynamically enable/disable PML
when dirty logging gets turned on/off for the first/last memslot.
Signed-off-by: Makarand Sonare <makarandsonare@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
