This patch changes the handling and lifecycle of vm->task_info object.
The major changes are:
- vm->task_info is a dynamically allocated ptr now, and its uasge is
reference counted.
- introducing two new helper funcs for task_info lifecycle management
- amdgpu_vm_get_task_info: reference counts up task_info before
returning this info
- amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.
This patch also does logistical changes required for existing usage
of vm->task_info.
V2: Do not block all the prints when task_info not found (Felix)
V3: Fixed review comments from Felix
- Fix wrong indentation
- No debug message for -ENOMEM
- Add NULL check for task_info
- Do not duplicate the debug messages (ti vs no ti)
- Get first reference of task_info in vm_init(), put last
in vm_fini()
V4: Fixed review comments from Felix
- fix double reference increment in create_task_info
- change amdgpu_vm_get_task_info_pasid
- additional changes in amdgpu_gem.c while porting
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's used for more than just SR-IOV now, so move it to
amdgpu_gmc.c and rename it to better match the functionality and
update the comments in the code paths to better document
when each path is used and why. No functional change.
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shaoyun.Liu@amd.com
Cc: Christian.Koenig@amd.com
The ecc_irq is disabled while GPU mode2 reset suspending process,
but not be enabled during GPU mode2 reset resume process.
Changed from V1:
only do sdma/gfx ras_late_init in aldebaran_mode2_restore_ip
delete amdgpu_ras_late_resume function
Changed from V2:
check umc ras supported before put ecc_irq
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a module parameter to control the AGP aperture. The AGP
aperture is an aperture in the GPU's internal address space
which provides direct non-paged access to the platform address
space. This access is non-snooped so only uncached memory
can be accessed.
Add a knob so that we can toggle this for debugging.
Fixes: 67318cb843 ("drm/amdgpu/gmc11: set gart placement GC11")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
WREG32/RREG32_SOC15_IP_NO_KIQ and amdgpu_virt_kiq_reg_write_reg_wait
are not using the correct rlcg interface or mec engine, respectively.
Add xcc instance parameter to them.
v4: Use GET_INST and squash commit with:
"drm/amdgpu: Add xcc_inst param to amdgpu_virt_kiq_reg_write_reg_wait"
v3: xcc not needed for MMMHUB
v2: rebase
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The default AGP settings were overwriting the IP selected
ones since the default was getting set after the IP ones
were selected.
Fixes: de59b69932 ("drm/amdgpu/gmc: set a default disable value for AGP")
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-November/100966.html
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cache the current fault info in the vm struct. This can be queried
by userspace later to help debug UMDs.
Cc: samuel.pitoiset@gmail.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We normally place GART based on the location of VRAM and the
available address space around that, but provide an option
to force a particular location for hardware that needs it.
v2: Switch to passing the placement via parameter
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To disable AGP, the start needs to be set to a higher
value than the end. Set a default disable value for
the AGP aperture and allow the IP specific GMC code
to enable it selectively be calling amdgpu_gmc_agp_location().
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of each implementation doing this more or less correctly
move taking the reset lock at a higher level.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That function never fails, drop the error return.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same PASID can be used by more than one VMID, reset each of them.
Use the common KIQ handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the SDMA workaround necessary for Navi 1x into a higher layer.
v2: use dev_err
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These flags (for GEM and SVM allocations) allocate
memory that allows for system-scope atomic semantics.
On GFX943 these flags cause caches to be avoided on
non-local memory.
On all other ASICs they are identical in functionality to the
equivalent COHERENT flags.
Corresponding Thunk patch is at
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88
Reviewed-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an inline function for version check. Gives more flexibility to
handle any format changes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align with new vmhub definition.
v2: use client_id == VMC to decide vmhub(Hawking)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch warnings:
WARNING: Consider removing the code enclosed by this #if 0 and its #endif
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: quoted string split across lines
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below warning:
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then
dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the invalid PTE flag setting with TF enabled.
This is to ensure, in addition to transitioning the
retry fault to a no-retry fault, it also causes the
wavefront to enter the trap handler. With the current
setting, the fault only transitions to a no-retry fault.
Additionally, have 2 sets of invalid PTE settings, one for
TF enabled, the other for TF disabled. The setting with
TF disabled, doesn't work with TF enabled.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename mman.entity to mman.high_pr to make the distinction
clearer that this is a high priority scheduler. Similarly,
rename the recently added mman.delayed to mman.low_pr to
make it clear it is a low priority scheduler.
No functional change in this patch.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding 'inst' arguments to kdocs.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:428: warning: Function parameter or member 'inst' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:626: warning: Function parameter or member 'inst' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c:423: warning: Function parameter or member 'inst' not described in 'gmc_v10_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c:328: warning: Function parameter or member 'inst' not described in 'gmc_v11_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:950: warning: Function parameter or member 'inst' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This work is required for GC 9.4.3, previous to support memory
partitions per node at SVM. When multiple partition is configured,
every BO should be allocated inside one specific partition which
corresponds to the current amdgpu_device and kfd_node.
v2: squash in compilation fix (Alex)
v3: squash in fix for pre-gfx 9.4.3 (Alex)
v4: squash in best_loc fix (Alex)
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add XCC instance to select the correct KIQ ring when
flushing TLBs on a multi-XCC setup.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the layout of VMHUB definition has been changed to cover multiple
XCD/AID case, the original num_vmhubs is not appropriate to do vmhub
iteration any more.
Drop num_vmhubs and introduce vmhubs_mask instead.
v2: switch to the new VMHUB layout
v3: use DECLARE_BITMAP to define vmhubs_mask
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Each partition has its own gfxhub or mmhub. adjust
the num of MAX_VMHUBS and the GFXHUB/MMHUB layout (Le)
v2: re-design the AMDGPU_GFXHUB/AMDGPU_MMHUB layout (Le)
v3: apply the gfxhub/mmhub layout to new IPs (Hawking)
v4: fix up gmc11 (Alex)
v5: rebase (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.
[ 82.340264] Call Trace:
[ 82.340265] <TASK>
[ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 82.341529] process_one_work+0x21d/0x3f0
[ 82.341535] worker_thread+0x1fa/0x3c0
[ 82.341538] ? process_one_work+0x3f0/0x3f0
[ 82.341540] kthread+0xff/0x130
[ 82.341544] ? kthread_complete_and_exit+0x20/0x20
[ 82.341547] ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: more kiq instances are a available in SOC (Le)
v2: squash commits to avoid breaking the build (Le)
v3: make the conversion for gfx/mec v11_0 (Hawking)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks better to place this field in ring
structure. Also drop the repeated ring funcs definitions
if there's no difference except for vmhub field.
v2: rename the field to vm_hub like others (Le)
v3: apply the changes to new ip blocks (Hawking)
v4: fix vcn sw ring (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize umc ras block only when umc ip block
supports ras. Driver queries ras capabilities after
early_init, ras block init needs to be moved to
sw_init.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It records how many bad pages are retired in one uncorrectable error.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Centralize the limit handling and validation in one place instead
of spreading that around in different hw generations.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfxhub registers are part of gfx IP and should not need to be
changed. Doing so without disabling gfxoff can hang the gfx IP.
v2: add comments explaining why we can skip the interrupt
control for S0i3
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-6.2-2022-11-18:
amdgpu:
- SR-IOV fixes
- Clean up DC checks
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- Don't enable degamma on asics which don't support it
- IP discovery fixes
- BACO fixes
- Fix vbios allocation handling when vkms is enabled
- Drop buggy tdr advanced mode GPU reset handling
- Fix the build when DCN is not set in kconfig
- MST DSC fixes
- Userptr fixes
- FRU and RAS EEPROM fixes
- VCN 4.x RAS support
- Aldrebaran CU occupancy reporting fix
- PSP ring cleanup
amdkfd:
- Memory limit fix
- Enable cooperative launch on gfx 10.3
amd-drm-next-6.2-2022-11-11:
amdgpu:
- SMU 13.x updates
- GPUVM TLB race fix
- DCN 3.1.4 updates
- DCN 3.2.x updates
- PSR fixes
- Kerneldoc fix
- Vega10 fan fix
- GPUVM locking fixes in error pathes
- BACO fix for Beige Goby
- EEPROM I2C address cleanup
- GFXOFF fix
- Fix DC memory leak in error pathes
- Flexible array updates
- Mtype fix for GPUVM PTEs
- Move Kconfig into amdgpu directory
- SR-IOV updates
- Fix possible memory leak in CS IOCTL error path
amdkfd:
- Fix possible memory overrun
- CRIU fixes
radeon:
- ACPI ref count fix
- HDA audio notifier support
- Move Kconfig into radeon directory
UAPI:
- Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI.
These are used internally in the driver to align location based memory coherency
requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They
are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now.
They are just used internally in the kernel driver for now for existing KFD memory
allocations. So a change to the UAPI header, but no functional change in the UAPI.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
The same BO may need different MTYPEs and SNOOP flags in PTEs depending
on its current location relative to the mapping GPU. Setting MTYPEs from
clients ahead of time is not practical for coherent memory sharing.
Instead determine the correct MTYPE for the desired coherence model and
current BO location when updating the page tables.
To maintain backwards compatibility with MTYPE-selection in
AMDGPU_VA_OP_MAP, the coherence-model-based MTYPE selection is only
applied if it chooses an MTYPE other than MTYPE_NC (the default).
Add two AMDGPU_GEM_CREATE_... flags to indicate the coherence model. The
default if no flag is specified is non-coherent (i.e. coarse-grained
coherent at dispatch boundaries).
Update amdgpu_amdkfd_gpuvm.c to use this new method to choose the
correct MTYPE depending on the current memory location.
v2:
* check that bo is not NULL (e.g. PRT mappings)
* Fix missing ~ bitmask in gmc_v11_0.c
v3:
* squash in "drm/amdgpu: Inherit coherence flags on dmabuf import"
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During multi-vf executing benchmark (Luxmark) observed kiq error timeout.
It happenes because all of VFs do the tlb invalidation at the same time.
Although each VF has the invalidate register set, from hardware side
the invalidate requests are queue to execute.
[How]
In case of 12 VF increase timeout on 12*100ms
Signed-off-by: Dusica Milinkovic <Dusica.Milinkovic@amd.com>
Acked-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable swiotlb for gmc 10.0.
v2: include drm_cache.h to use the function ‘drm_need_swiotlb’
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GMC 10 parts which support scatter/gather display (display
from system memory), we should allocate a larger gart size
to better handler larger displays. This mirrors what we already
do for GMC 9 parts.
v2: fix typo (Alex)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Loop through all VMIDs for gmc_v10_0_flush_gpu_tlb_pasid and
gmc_v11_0_flush_gpu_tlb_pasid (only if using MES for gmc_v10). This is
required for MES due to use_different_vmid_compute causing SDMA queues
to be assigned different VMIDs than compute for the same PASID.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the AMDGPU_VM_NOALLOC flag to let userspace control MALL allocation.
v2: also add the flag to the allowed flags.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If MES is enabled, don't use kiq to flush gpu tlb,
for it would result in conflicting with mes fw.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MES FW manages IH_VMID_x_LUT updating, skip emitting pasid
mapping packet.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without MMHUB clock gating being enabled then MMHUB will not disconnect
from DF and will result in DF C-state entry can't be accessed during S2idle
suspend, and eventually s0ix entry will be blocked.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With this, we can support more CG flags.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the GPU is passed through to a guest VM, use the PCI
BAR for CPU FB access rather than the physical address of
carve out. The physical address is not valid in a guest.
v2: Fix HDP handing as suggested by Michel
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some ASICs need reserved memory for firmware or other components,
which is not allowed to be used by driver.
amdgpu_gmc_get_reserved_allocation is to handle additional areas.
To avoid any missing calling,
merged amdgpu_gmc_get_reserved_allocation to
amdgpu_gmc_get_vbios_allocations.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define amdgpu_ras_block_late_fini_default in amdgpu_ras.c as
.ras_fini common function, which is called when
.ras_fini of ras block isn't initialized.
2. Remove the code of using amdgpu_ras_block_late_fini to
initialize .ras_fini in ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove redundant calls of amdgpu_ras_block_late_fini in umc ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
