VCN need not be shared in CPX mode always for all GFX 9.4.3 SOC SKUs. In
certain configs, VCN instance can be exclusively allocated to a
partition even under CPX mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize the code to add support for BAMACO mode checking
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASD is not needed by headless GPU.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for MACO flag checking.
MACO mode only works if BACO is supported.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the high voltage issue after unload on smu 13.0.10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply this rule to all newer asics in sriov case.
For asic with VF MMIO access protection avoid using CPU for VM table updates.
CPU pagetable updates have issues with HDP flush as VF MMIO access protection
blocks write to BIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register
during sriov runtime.
Moved the check to amdgpu_device_init() to ensure it is done after
amdgpu_device_ip_early_init() where the IP versions are discovered.
Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use correct ref/mask for differnent gfx ring pipe.
This should fix the gfx hang issue after enabling gfx pipe1.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2117
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA_CNTL is not set in some cases, driver configures it by itself.
v2: simplify code
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch to add smu 14.0.1 support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From MES version 0x54, the log entry increased and require the log buffer
size to be increased. The 16k is maximum size agreed
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES log might slow down the performance for extra step of log the data,
disable it by default and introduce a parameter can enable it when necessary
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
refine function signature of amdgpu_aca_get_error_data();
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SOC21 ASICs, there is an issue in re-enabling PM features if a
suspend got aborted. In such cases, reset the device during resume
phase. This is a workaround till a proper solution is finalized.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Add FW information of all the IP's in the devcoredump.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise the old one will be used during GPU reset.
That's not expected.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Downgrade to debug information when IBs are skipped. Also, use dev_* to
identify the device.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Two misc-next in one.
drm-misc-next for v6.10-rc1:
The deal of a lifetime! You get ALL of the previous
drm-misc-next-2024-03-21-1 tag!!
But WAIT, there's MORE!
Cross-subsystem Changes:
- Assorted DT binding updates.
Core Changes:
- Clarify how optional wait_hpd_asserted is.
- Shuffle Kconfig names around.
Driver Changes:
- Assorted build fixes for panthor, imagination,
- Add AUO B120XAN01.0 panels.
- Assorted small fixes to panthor, panfrost.
drm-misc-next for v6.10:
UAPI Changes:
- Move some nouveau magic constants to uapi.
Cross-subsystem Changes:
- Move drm-misc to gitlab and freedesktop hosting.
- Add entries for panfrost.
Core Changes:
- Improve placement for TTM bo's in idle/busy handling.
- Improve drm/bridge init ordering.
- Add CONFIG_DRM_WERROR, and use W=1 for drm.
- Assorted documentation updates.
- Make more (drm and driver) headers self-contained and add header
guards.
- Grab reservation lock in pin/unpin callbacks.
- Fix reservation lock handling for vmap.
- Add edp and edid panel matching, use it to fix a nearly identical
panel.
Driver Changes:
- Add drm/panthor driver and assorted fixes.
- Assorted small fixes to xlnx, panel-edp, tidss, ci, nouveau,
panel and bridge drivers.
- Add Samsung s6e3fa7, BOE NT116WHM-N44, CMN N116BCA-EA1,
CrystalClear CMT430B19N00, Startek KD050HDFIA020-C020A,
powertip PH128800T006-ZHC01 panels.
- Fix console for omapdrm.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bea310a6-6ff6-477e-9363-f9f053cfd12a@linux.intel.com
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HDMI_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-12-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HDCP_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-11-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-10-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-8-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Share same codes with 4.0.5 and enable collaborate mode for VPE.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align with FW changes.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fix mode2 reset failure.
Should power on VPE when hw_init.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases where soft reset seems to succeed, but
does not, so always use mode1/2 for now.
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Share same codes with 4.0.5 and enable collaborate mode for VPE.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align with FW changes.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reducing the size of ucode_prefix to 25 in the gfx_v11_0_init_microcode
function. This would ensure that the total number of characters being
written into fw_name does not exceed its size of 40.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c: In function ‘gfx_v11_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:54: warning: ‘_pfp.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
523 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
523 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:54: warning: ‘_me.bin’ directive output may be truncated writing 7 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
540 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix);
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 40
540 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:70: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
557 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:25: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
557 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:54: warning: ‘_mec.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
569 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
569 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC [M] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_clockpowergating.o
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace separate parameters with struct ta_ras_query_address_input.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The size of fw_name is increased to ensure that it can accommodate
the maximum possible size of the string being written into it.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c: In function ‘gfx_v9_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1255 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name);
| ^~
......
1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
1255 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1261 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name);
| ^~
......
1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30
1261 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1267 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name);
| ^~
......
1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30
1267 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1303 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name);
| ^~
......
1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30
1303 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1309 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name);
| ^~
......
1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:17: note: ‘snprintf’ output between 23 and 52 bytes into a destination of size 30
1309 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1311 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~
......
1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
1311 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1344 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name);
| ^~
......
1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30
1344 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1346 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~
......
1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
1346 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1356 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name);
| ^~
......
1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:25: note: ‘snprintf’ output between 21 and 50 bytes into a destination of size 30
1356 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1358 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name);
| ^~
......
1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:25: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 30
1358 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The total size of the fw_name buffer is 8 (for "amdgpu/") + 30 (for
ucode_prefix) + 5 (for "_pfp") + 5 (for "_wks") + 5 (for ".bin") = 53
characters.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c: In function ‘gfx_v10_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
3982 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40
3982 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=]
3988 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40
3988 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=]
3994 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40
3994 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:62: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
4001 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
4001 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
4017 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40
4017 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:54: warning: ‘_mec2’ directive output may be truncated writing 5 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
4024 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
| ^~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:9: note: ‘snprintf’ output between 17 and 50 bytes into a destination of size 40
4024 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The snprintf function is used to write a formatted string into fw_name.
The format of the string is "amdgpu/%s_mes%s.bin", where %s is replaced
by the string in ucode_prefix and the second %s is replaced by either
"_2" or "1" depending on the condition pipe == AMDGPU_MES_SCHED_PIPE.
The length of the string "amdgpu/%s_mes%s.bin" is 16 characters plus the
length of ucode_prefix and the length of the string "_2" or "1". The
size of ucode_prefix is 30, so the maximum length of ucode_prefix is 29
characters (since one character is needed for the null terminator).
Therefore, the maximum possible length of the string written into
fw_name is 16 + 29 + 2 = 47 characters.
The size of fw_name is 40, so if the length of the string written into
fw_name is more than 39 characters (since one character is needed for
the null terminator), it will be truncated by the snprintf function, and
thus warnings will be seen.
By increasing the size of fw_name to 50, we ensure that fw_name is
large enough to hold the maximum possible length of the string, so the
snprintf function will not truncate the output.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c: In function ‘amdgpu_mes_init_microcode’:
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:66: warning: ‘%s’ directive output may be truncated writing up to 1 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:17: note: ‘snprintf’ output between 16 and 46 bytes into a destination of size 40
1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1483 | ucode_prefix,
| ~~~~~~~~~~~~~
1484 | pipe == AMDGPU_MES_SCHED_PIPE ? "" : "1");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 1 byte into a region of size between 0 and 29 [-Wformat-truncation=]
1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~
1478 | ucode_prefix,
1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
| ~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 40
1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1478 | ucode_prefix,
| ~~~~~~~~~~~~~
1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 2 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~
1478 | ucode_prefix,
1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
| ~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 18 and 47 bytes into a destination of size 40
1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1478 | ucode_prefix,
| ~~~~~~~~~~~~~
1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:62: warning: ‘_mes.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1490 | ucode_prefix);
| ~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reducing the size of ucode_prefix to 25 in the amdgpu_vcn_early_init
function. This would ensure that the total number of characters being
written into fw_name does not exceed its size of 40.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c: In function ‘amdgpu_vcn_early_init’:
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40
102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40
102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:73: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 2 and 31 [-Wformat-truncation=]
105 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i);
| ^~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:25: note: ‘snprintf’ output between 14 and 43 bytes into a destination of size 40
105 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And set the socket id.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refractor devcoredump code into new files since its
functionality is expanded further and better to slit
and devcoredump to have its own file.
v2: Fix the build failure caught by arm compiler
of implicit function declaration with #ifdef
v3: squash in fix for implicit declaration error
Cc: Ivan Lipski <ivan.lipski@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fix mode2 reset failure.
Should power on VPE when hw_init.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add ras event id support for ACA.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because the UE Valid MCA count will only be cleared after reset,
in order to avoid repeated counting of the error count,
the aca bank is only updated once during ras isr.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The idea behind this patch is to delay the freeing of PT entry objects
until the TLB flush is done.
This patch:
- Adds a tlb_flush_waitlist in amdgpu_vm_update_params which will keep the
objects that need to be freed after tlb_flush.
- Adds PT entries in this list in amdgpu_vm_ptes_update after finding
the PT entry.
- Changes functionality of amdgpu_vm_pt_free_dfs from (df_search + free)
to simply freeing of the BOs, also renames it to
amdgpu_vm_pt_free_list to reflect this same.
- Exports function amdgpu_vm_pt_free_list to be called directly.
- Calls amdgpu_vm_pt_free_list directly from amdgpu_vm_update_range.
V2: rebase
V4: Addressed review comments from Christian
- add only locked PTEs entries in TLB flush waitlist.
- do not create a separate function for list flush.
- do not create a new lock for TLB flush.
- there is no need to wait on tlb_flush_fence exclusively.
V5: Addressed review comments from Christian
- change the amdgpu_vm_pt_free_dfs's functionality to simple freeing
of the objects and rename it.
- add all the PTE objects in params->tlb_flush_waitlist
- let amdgpu_vm_pt_free_root handle the freeing of BOs independently
- call amdgpu_vm_pt_free_list directly
V6: Rebase
V7: Rebase
V8: Added a NULL check to fix this backtrace issue:
[ 415.351447] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 415.359245] #PF: supervisor write access in kernel mode
[ 415.365081] #PF: error_code(0x0002) - not-present page
[ 415.370817] PGD 101259067 P4D 101259067 PUD 10125a067 PMD 0
[ 415.377140] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 415.382004] CPU: 0 PID: 25481 Comm: test_with_MPI.e Tainted: G OE 5.18.2-mi300-build-140423-ubuntu-22.04+ #24
[ 415.394437] Hardware name: AMD Corporation Sh51p/Sh51p, BIOS RMO1001AS 02/21/2024
[ 415.402797] RIP: 0010:amdgpu_vm_ptes_update+0x6fd/0xa10 [amdgpu]
[ 415.409648] Code: 4c 89 ff 4d 8d 66 30 e8 f1 ed ff ff 48 85 db 74 42 48 39 5d a0 74 40 48 8b 53 20 48 8b 4b 18 48 8d 43 18 48 8d 75 b0 4c 89 ff <48
> 89 51 08 48 89 0a 49 8b 56 30 48 89 42 08 48 89 53 18 4c 89 63
[ 415.430621] RSP: 0018:ffffc9000401f990 EFLAGS: 00010287
[ 415.436456] RAX: ffff888147bb82f0 RBX: ffff888147bb82d8 RCX: 0000000000000000
[ 415.444426] RDX: 0000000000000000 RSI: ffffc9000401fa30 RDI: ffff888161f80000
[ 415.452397] RBP: ffffc9000401fa80 R08: 0000000000000000 R09: ffffc9000401fa00
[ 415.460368] R10: 00000007f0cc0000 R11: 00000007f0c85000 R12: ffffc9000401fb20
[ 415.468340] R13: 00000007f0d00000 R14: ffffc9000401faf0 R15: ffff888161f80000
[ 415.476312] FS: 00007f132ff89840(0000) GS:ffff889f87c00000(0000) knlGS:0000000000000000
[ 415.485350] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 415.491767] CR2: 0000000000000008 CR3: 0000000161d46003 CR4: 0000000000770ef0
[ 415.499738] PKRU: 55555554
[ 415.502750] Call Trace:
[ 415.505482] <TASK>
[ 415.507825] amdgpu_vm_update_range+0x32a/0x880 [amdgpu]
[ 415.513869] amdgpu_vm_clear_freed+0x117/0x250 [amdgpu]
[ 415.519814] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x18c/0x250 [amdgpu]
[ 415.527729] kfd_ioctl_unmap_memory_from_gpu+0xed/0x340 [amdgpu]
[ 415.534551] kfd_ioctl+0x3b6/0x510 [amdgpu]
V9: Addressed review comments from Christian
- No NULL check reqd for root PT freeing
- Free PT list regardless of needs_flush
- Move adding BOs in list in a separate function
V10: Added Christian's RB
V11: squash in list fix
Cc: Christian König <Christian.Koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Christian König <Christian.Koenig@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core:
- fix rounding in drm_fixp2int_round()
bridge:
- fix documentation for DRM_BRIDGE_OP_EDID
sun4i:
- fix 64-bit division on 32-bit architectures
tests:
- fix dependency on DRM_KMS_HELPER
probe-helper:
- never return negative values from .get_modes() plus driver fixes
xe:
- invalidate userptr vma on page pin fault
- fail early on sysfs file creation error
- skip VMA pinning on xe_exec if no batches
nouveau:
- clear bo resource bus after eviction
- documentation fixes
- don't check devinit disable on GSP
amdgpu:
- Freesync fixes
- UAF IOCTL fixes
- Fix mmhub client ID mapping
- IH 7.0 fix
- DML2 fixes
- VCN 4.0.6 fix
- GART bind fix
- GPU reset fix
- SR-IOV fix
- OD table handling fixes
- Fix TA handling on boards without display hardware
- DML1 fix
- ABM fix
- eDP panel fix
- DPPCLK fix
- HDCP fix
- Revert incorrect error case handling in ioremap
- VPE fix
- HDMI fixes
- SDMA 4.4.2 fix
- Other misc fixes
amdkfd:
- Fix duplicate BO handling in process restore
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmX833kACgkQDHTzWXnE
hr4ZDA/8CC/jW8drOInD52pqPxtFrhLPZ/pD+Vz4BWkcLnzRiM2d5gM3z3/JE7xi
BGcxmhPgwT/M9oZENRxtSf2uUV/RZ0OMj+Mpwnew1YpANwWBe8pKeiwbHA4A4qzP
Z46VLK0+BXEjh0btC4RY/Ji6yEuNCNAh0FBWTaLYoakN8M1JAJCUYFrXeWp8gYVm
4yZETXO64iGNYy4wz9tD5fohC3xo1t9WRcskBV97uNrntDQlagoEdAnh1VF2K3yC
SAwF3O8J60xh7osNx5YE4ENXynvh7UaAc75kliSsWoZKoTb1TFlyu8abE7NQRRXc
9fjzwB6tQ6BJRFpmQGF6RHAhuoddqm9nPaOYOfQ/wXbVV1ajYvXmK+eGhHfR6/VO
YYzhXksd9LGX34RWAcs9lJbV+EjG4buYnSThkvCYcPs2Ys+JppwlPYSd9sC8vqgP
6D7slAoa8rh99WWz4mZ7ZuOveiOUS3Yzie5Vms2Dlwl/kHW5E1WpeEw+fXAqq08M
m83whU2cod/oUvJtcuYFLoNAlhYYngVOI9XGgdM+eL/dpdKjTpyH9JHHEGj/Nejr
W7Kts9CLLBShNKR8Wo2fyTu1n9dwY/eFVA1P48Mt03345G/fMNtPxy+M1Rt6LHQ2
fmeBSU1P6mqoFeji4xCRXdJ4oDveNnHlyW9J9QJGXG44mN89PCc=
=EW4i
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Fixes from the last week (or 3 weeks in amdgpu case), after amdgpu,
it's xe and nouveau then a few scattered core fixes.
core:
- fix rounding in drm_fixp2int_round()
bridge:
- fix documentation for DRM_BRIDGE_OP_EDID
sun4i:
- fix 64-bit division on 32-bit architectures
tests:
- fix dependency on DRM_KMS_HELPER
probe-helper:
- never return negative values from .get_modes() plus driver fixes
xe:
- invalidate userptr vma on page pin fault
- fail early on sysfs file creation error
- skip VMA pinning on xe_exec if no batches
nouveau:
- clear bo resource bus after eviction
- documentation fixes
- don't check devinit disable on GSP
amdgpu:
- Freesync fixes
- UAF IOCTL fixes
- Fix mmhub client ID mapping
- IH 7.0 fix
- DML2 fixes
- VCN 4.0.6 fix
- GART bind fix
- GPU reset fix
- SR-IOV fix
- OD table handling fixes
- Fix TA handling on boards without display hardware
- DML1 fix
- ABM fix
- eDP panel fix
- DPPCLK fix
- HDCP fix
- Revert incorrect error case handling in ioremap
- VPE fix
- HDMI fixes
- SDMA 4.4.2 fix
- Other misc fixes
amdkfd:
- Fix duplicate BO handling in process restore"
* tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/amdgpu/pm: Don't use OD table on Arcturus
drm/amdgpu: drop setting buffer funcs in sdma442
drm/amd/display: Fix noise issue on HDMI AV mute
drm/amd/display: Revert Remove pixle rate limit for subvp
Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode"
Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init()"
drm/amd/display: Add a dc_state NULL check in dc_state_release
drm/amd/display: Return the correct HDCP error code
drm/amd/display: Implement wait_for_odm_update_pending_complete
drm/amd/display: Lock all enabled otg pipes even with no planes
drm/amd/display: Amend coasting vtotal for replay low hz
drm/amd/display: Fix idle check for shared firmware state
drm/amd/display: Update odm when ODM combine is changed on an otg master pipe with no plane
drm/amd/display: Init DPPCLK from SMU on dcn32
drm/amd/display: Add monitor patch for specific eDP
drm/amd/display: Allow dirty rects to be sent to dmub when abm is active
drm/amd/display: Override min required DCFCLK in dml1_validate
drm/amdgpu: Bypass display ta if display hw is not available
drm/amdgpu: correct the KGQ fallback message
drm/amdgpu/pm: Check the validity of overdiver power limit
...
