Device managed panel bridge wrappers are created by calling to
drm_panel_bridge_add_typed() and registering a release handler for
clean-up when the device gets unbound.
Since the memory for this bridge is also managed and linked to the panel
device, the release function should not try to free that memory.
Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will
fail in this case and emit a warning because the panel bridge resource
is no longer on the device resources list (it has been removed from
there before the call to release handlers).
Fixes: 67022227ff ("drm/bridge: Add a devm_ allocator for panel bridge.")
Signed-off-by: Adam Miotk <adam.miotk@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610102739.139852-1-adam.miotk@arm.com
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe work.
-----BEGIN PGP SIGNATURE-----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=pexB
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Some fixes for the end of the merge window, mostly amdgpu and panthor,
with one nouveau uAPI change that fixes a bad decision we made a few
months back.
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe
work"
* tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu/atomfirmware: add intergrated info v2.3 table
drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
drm/bridge: adv7511: Attach next bridge without creating connector
drm/buddy: Fix the warn on's during force merge
drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations
drm/panthor: Call panthor_sched_post_reset() even if the reset failed
drm/panthor: Reset the FW VM to NULL on unplug
drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level
drm/panthor: Force an immediate reset on unrecoverable faults
drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints
drm/panthor: Fix an off-by-one in the heap context retrieval logic
drm/panthor: Relax the constraints on the tiler chunk size
drm/panthor: Make sure the tiler initial/max chunks are consistent
drm/panthor: Fix tiler OOM handling to allow incremental rendering
drm: xlnx: zynqmp_dpsub: Fix compilation error
drm: xlnx: zynqmp_dpsub: Fix few function comments
further deprecate class based I2C device instantiation. All users are
converted, too. Other that that, Andi collected a number if I2C host
driver patches. Those merges have their own description.
-----BEGIN PGP SIGNATURE-----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=viLd
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c core removes an argument from the i2c_mux_add_adapter() call to
further deprecate class based I2C device instantiation. All users are
converted, too.
Other that that, Andi collected a number if I2C host driver patches.
Those merges have their own description"
* tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits)
power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter()
i2c: mux: Remove class argument from i2c_mux_add_adapter()
i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
i2c: acpi: Unbind mux adapters before delete
i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
i2c: pxa: use 'time_left' variable with wait_event_timeout()
i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
i2c: rk3x: use 'time_left' variable with wait_event_timeout()
i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout()
i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout()
i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()
i2c: st: use 'time_left' variable with wait_for_completion_timeout()
i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout()
i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout()
i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout()
i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout()
i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout()
...
The connector is created by either this ADV7511 bridge driver or
any DRM device driver/previous bridge driver, so this ADV7511
bridge driver should not let the next bridge driver create connector.
If the next bridge is a HDMI connector, the next bridge driver
would fail to attach bridge from display_connector_attach() without
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.
Add that flag to drm_bridge_attach() function call in
adv7511_bridge_attach() to fix the issue.
This fixes the issue where the HDMI connector bridge fails to attach
to the previous ADV7535 bridge on i.MX8MP EVK platform:
[ 2.216442] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /hdmi-connector to encoder None-37: -22
[ 2.220675] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[ 2.226262] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@30800000/i2c@30a30000/hdmi@3d to encoder None-37: -22
[ 2.245204] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@32c00000/dsi@32e60000 to encoder None-37: -22
[ 2.256445] imx-lcdif 32e80000.display-controller: error -EINVAL: Failed to attach bridge for endpoint0
[ 2.265850] imx-lcdif 32e80000.display-controller: error -EINVAL: Cannot connect bridge
[ 2.274009] imx-lcdif 32e80000.display-controller: probe with driver imx-lcdif failed with error -22
Fixes: 14b3cdbd0e ("drm/bridge: adv7511: make it honour next bridge in DT")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Sui Jingfeng <suijingfeng@bosc.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513080243.3952292-1-victor.liu@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
99a741aa7a2d ("i2c: mux: gpio: remove support for class-based device
instantiation") removed the last call to i2c_mux_add_adapter() with a
non-null class argument. Therefore the class argument can be removed.
Note: Class-based device instantiation is a legacy mechanism which
shouldn't be used in new code, so we can rule out that this argument
may be needed again in the future.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This reverts commit 8a91b29f1f.
The regulator_disable() added by the original commit solves one kind of
regulator imbalance but adds another one as it allows the regulator to be
disabled one more time than it is enabled in the following scenario:
1. Start video pipeline -> sn65dsi83_atomic_pre_enable -> regulator_enable
2. PLL lock fails -> regulator_disable
3. Stop video pipeline -> sn65dsi83_atomic_disable -> regulator_disable
The reason is clear from the code flow, which looks like this (after
removing unrelated code):
static void sn65dsi83_atomic_pre_enable()
{
regulator_enable(ctx->vcc);
if (PLL failed locking) {
regulator_disable(ctx->vcc); <---- added by patch being reverted
return;
}
}
static void sn65dsi83_atomic_disable()
{
regulator_disable(ctx->vcc);
}
The use case for introducing the additional regulator_disable() was
removing the module for debugging (see link below for the discussion). If
the module is removed after a .atomic_pre_enable, i.e. with an active
pipeline from the DRM point of view, .atomic_disable is not called and thus
the regulator would not be disabled.
According to the discussion however there is no actual use case for
removing the module with an active pipeline, except for
debugging/development.
On the other hand, the occurrence of a PLL lock failure is possible due to
any physical reason (e.g. a temporary hardware failure for electrical
reasons) so handling it gracefully should be supported. As there is no way
for .atomic[_pre]_enable to report an error to the core, the only clean way
to support it is calling regulator_disabled() only in .atomic_disable,
unconditionally, as it was before.
Link: https://lore.kernel.org/all/15244220.uLZWGnKmhe@steina-w/
Fixes: 8a91b29f1f ("drm/bridge: ti-sn65dsi83: Fix enable error path")
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426122259.46808-1-luca.ceresoli@bootlin.com
(cherry picked from commit 2940ee03b2)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
This reverts commit c0e0f13935, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd93d43b07f8ed6368119f4a5ddac2ee80debe53.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit e075e496f5, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit 4d15125d7f, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit 0323287de8, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit 3166e7e6d9, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a40e70a0abd3d841c23c107d452a43fdd70ef37a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit f6d2dc03fa, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd288a5943dab8609f2d1f2bf413595a61df727a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Surprisingly many places depend on debugfs.h to be included via
drm_print.h. Fix them.
v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe
v2: Also fix ivpu and vmwgfx
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When enabling i.MX8MP DWC HDMI driver, it automatically selects
PHY_FSL_SAMSUNG_HDMI_PHY, since it wont' work without the phy.
This may cause some Kconfig warnings during various build tests.
Fix this by implying the phy instead of selecting the phy.
To prevent this from happening with the DRM_IMX8MP_HDMI_PVI, also
imply it instead of selecting it.
Fixes: 1f36d63467 ("drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404190103.lLm8LtuP-lkp@intel.com/
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422103352.8886-1-aford173@gmail.com
The hs_rate and lp_rate may be used by the dsi host for timing
calculations. The tc358775 has a maximum bit rate of 1 Gbps/lane,
tc358765 has maximurate of 800 Mbps per lane.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-11-tony@atomide.com
The tc358775 bridge is pin compatible with earlier tc358765 according to
the tc358774xbg_datasheet_en_20190118.pdf documentation. Compared to the
tc358765, the tc358775 supports a STBY GPIO and higher data rates.
The tc358765 has a register bit for video event mode vs video pulse mode.
We must set it to video event mode for the LCD output to work, and on the
tc358775, this bit no longer exists.
Looks like the registers seem to match otherwise based on a quick glance
comparing the defines to the earlier Android kernel tc358765 driver.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-10-tony@atomide.com
Set pre_enable_prev_first to ensure the previous bridge is enabled
first.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Tested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-9-tony@atomide.com
Burst and low-power modes are supported both for tc358765 and tc358775.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Tested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-8-tony@atomide.com
The current code assumes the data-lanes property is configured on the
DSI host side instead of the bridge side, and assumes DSI host endpoint 1.
Let's standardize on what the other bridge drivers are doing and parse the
data-lanes property for the bridge. Only if data-lanes property is not found,
let's be nice and also check the DSI host for old dtb in use and warn.
And as Dmitry pointed out, the lanes for the host and the bridge may be
different because the lanes may be swapped on the host side.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-7-tony@atomide.com
The stby pin is optional. It is only needed for power-up and down
sequencing. It is not needed, if the power rails cannot by dynamically
enabled.
Because the GPIO is now optional, remove the error message.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-6-tony@atomide.com
The bridge always uses 24bpp internally. Therefore, for jeida-18
mapping we need to discard the lowest two bits for each channel and thus
starting with LV_[RGB]2. jeida-24 has the same mapping but uses four
lanes instead of three, with the forth pair transmitting the lowest two
bits of each channel. Thus, the mapping between jeida-18 and jeida-24
is actually the same, except that one channel is turned off (by
selecting the RGB666 format in VPCTRL).
While at it, remove the bogus comment about the hardware default because
the default is overwritten in any case.
Tested with a jeida-18 display (Evervision VGG644804).
Fixes: b26975593b ("display/drm/bridge: TC358775 DSI/LVDS driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-5-tony@atomide.com
Add a new LVDS controller driver for sam9x7 which does the following:
- Prepares and enables the LVDS Peripheral clock
- Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
to the global bridge list.
- Identifies its output endpoint as panel and adds it to the encoder
display pipeline
- Enables the LVDS serializer
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Acked-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240421011050.43265-3-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-3-dharma.b@microchip.com
Previously, the audio status was not updated during detection, leading
to a persistent audio despite hot plugging events. To resolve this
issue, update the audio status during detection.
Fixes: 566fef1226 ("drm/bridge: anx7625: add HDMI audio function")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-anx7625-v3-1-f916ae31bdd7@chromium.org
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Also move the "failed to attach" error message so that it's only printed
when the devm_mipi_dsi_attach() call fails.
Fixes: 6352cd451d ("drm: bridge: Add TI DLPC3433 DSI to DMD bridge")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-7-619a28148e5c@collabora.com
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: b26975593b ("display/drm/bridge: TC358775 DSI/LVDS driver")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-6-619a28148e5c@collabora.com
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 0cbbd5b1a0 ("drm: bridge: add support for lontium LT9611UXC bridge")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-5-619a28148e5c@collabora.com
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 23278bf54a ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-4-619a28148e5c@collabora.com
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-3-619a28148e5c@collabora.com
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 8dde6f7452 ("drm: bridge: icn6211: Add I2C configuration support")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-2-619a28148e5c@collabora.com
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 269332997a ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-1-619a28148e5c@collabora.com
After my fix yesterday, I ran into another problem of the same kind:
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `drm_dp_dpcd_readb':
analogix_dp_core.c:(.text+0x194): undefined reference to `drm_dp_dpcd_read'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `drm_dp_dpcd_writeb':
analogix_dp_core.c:(.text+0x214): undefined reference to `drm_dp_dpcd_write'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `analogix_dp_stop_crc':
analogix_dp_core.c:(.text+0x4b0): undefined reference to `drm_dp_stop_crc'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `analogix_dp_start_crc':
analogix_dp_core.c:(.text+0xbe8): undefined reference to `drm_dp_start_crc'
Add the same dependency again to ROCKCHIP_ANALOGIX_DP after checking that
nothing else selects the analogix driver. Also add a dependency to
DRM_ANALOGIX_DP to make it easier to identifier future problems of
this type when they get introduced.
Fixes: 0323287de8 ("drm: Switch DRM_DISPLAY_DP_HELPER to depends on")
Fixes: d1ef8fc18b ("drm: fix DRM_DISPLAY_DP_HELPER dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405143531.925589-1-arnd@kernel.org
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304091005.717012-2-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304090555.716327-2-u.kleine-koenig@pengutronix.de
In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is
assigned to mhdp_state->current_mode, and there is a dereference of it in
drm_mode_set_name(), which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate().
Fix this bug add a check of mhdp_state->current_mode.
Fixes: fb43aa0acd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408125810.21899-1-amishin@t-argos.ru
Commit c0e0f13935 ("drm: Make drivers depends on DRM_DW_HDMI") turned
select dependencies into depends on ones. However, DRM_DW_HDMI was not
manually selectable which resulted in no way to enable the drivers that
were now depending on it.
Fixes: 4fc8cb47fc ("drm/display: Move HDMI helpers into display-helper module")
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240403-fix-dw-hdmi-kconfig-v1-2-afbc4a835c38@kernel.org
The IRQ registration currently assumes that the GPIO is dedicated
to it, but that may not necessarily be the case. If the board has
another device sharing the GPIO, it won't be registered and the
hot-plug detect fails to function.
Currently, the handler reads two registers and blindly
assumes one of them caused the interrupt and returns IRQ_HANDLED
unless there is an error. In order to properly do this, the IRQ
handler needs to check if it needs to handle the IRQ and return
IRQ_NONE if there is nothing to handle. With the check added
and the return code properly indicating whether or not it there
was an IRQ, the IRQF_SHARED can be set to share a GPIO IRQ.
V2: Add check to see if there is IRQ data to handle
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305004859.201085-1-aford173@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HDMI_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-12-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HDCP_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-11-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-10-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_AUX_BUS to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-9-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-8-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
DRM_DW_HDMI has a number of dependencies that might not be enabled.
However, drivers were used to selecting it while not enforcing the
DRM_DW_HDMI dependencies.
This could result in Kconfig warnings (and further build breakages) such
as:
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for DRM_DW_HDMI
Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && DRM_DISPLAY_HELPER [=n]
Selected by [m]:
- DRM_SUN8I_DW_HDMI [=m] && HAS_IOMEM [=y] && DRM_SUN4I [=m]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403262127.kZkttfNz-lkp@intel.com/
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-7-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
While most display helpers Kconfig symbols have the DRM_DISPLAY prefix,
the DisplayPort AUX bus implementation uses DRM_DP_AUX_BUS.
Since the number of users is limited and it's a selected symbol, we can
easily rename it to make it consistent.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-1-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
