Currently intel_connector_info(), which prints the per-connector
output for i915_display_info, just bails out early if the connector
doesn't have a current encoder. That leads to very confusing output
where some of your connected (and properly detected) outputs appear
to have no enumerated modes.
Get rid of the encoder stuff and just rely on the connector itself
so that the output is always consistent.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240329012331.29281-1-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Initialize HDCP capability variables to false to avoid UBSAN
warning in boolean value as some functions invoking this could
return without filling the two capability values.
--v2
-Fix Typo [Chaitanya]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401030106.274787-2-suraj.kandpal@intel.com
Currently we are only checking capability of remote device and not
immediate downstream device but during capability check we need are
concerned with only the HDCP capability of downstream device.
During i915_display_info reporting we need HDCP Capability for both
the monitors and downstream branch device if any this patch adds that.
--v2
-Use MST Hub HDCP version [Ankit]
--v3
-Redefined how we seprate remote and direct read to make sure HDMI
shim functions are not touched [Ankit]
--v4
- Fix the conditions so that hdcp_info with remote_req true is sent
only when encoder is mst [Ankit]
--v5
-No need to have the MST Hub version in i915_hdcp_sink_capability[Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-9-suraj.kandpal@intel.com
Rename hdcp_capable and hdcp_2_2_capable to hdcp_get_capability
and hdcp_2_2_get_capability to properly reflect what these functions
are doing.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-7-suraj.kandpal@intel.com
For validation purposes, it might be useful to be able to
force Bigjoiner mode, even if current dotclock/resolution
do not require that.
Lets add such to option to debugfs.
v2: - Apparently intel_dp_need_bigjoiner can't be used, when
debugfs entry is created so lets just check manually
the DISPLAY_VER.
v3: - Switch to intel_connector from drm_connector(Jani Nikula)
- Remove redundant modeset lock(Jani Nikula)
- Use kstrtobool_from_user for boolean value(Jani Nikula)
v4: - Apply the changes to proper function(Jani Nikula)
v5: - Removed unnecessary check from i915_bigjoiner_enable_show
(Ville Syrjälä)
- Added eDP connector check to intel_connector_debugfs_add
(Ville Syrjälä)
- Removed debug message in order to prevent dmesg flooding
(Ville Syrjälä)
v6: - Assume now always that m->private is intel_connector
- Fixed other similar conflicts
v7: - Move bigjoiner force option to intel_connector(Ville Syrjälä)
- Use DEFINE_SHOW_STORE_ATTRIBUTE instead of defining fops
manually.(Ville Syrjälä)
v8: - Pass intel_connector to debugfs_create_file, instead of drm_connector.
(Jani Nikula)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212125011.66174-1-uma.shankar@intel.com
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmVyFWMACgkQ+mJfZA7r
E8rVUwf/RWWyIyrlSOvz7okNgLtTn9K2A3WdtY6hPK6XZ/LVlO9MbCPT74E8Pnh3
mtxFK8fma8nXoVWCOxwtLI9HKJXiMgTIxpKAqapO2cU/ScpRZYoRJjaVIEMjiEWs
AhFSh/9D+u6hXeuYhAsg101sbmWmgvoIgoA4Ob2bUNyJOgsi5rLYsCsd0Y5i0qwm
CHvoyabZMXH4cYn19GlfOIxFtJ4StfaTfd5lNKAmXGrfoWTDQ5WkouXSaZ5EozoW
bl7gaF0kxbXH0RPw/A5VfmbHVaOnjWXIYNYN/51u3nvc4Oi1qeoDhKPmp9uJJ8Hr
AfqDo4h2WZkreuy+hB79uFa/YQA92Q==
=XV0u
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Improve display debug msgs and other general clean-ups (Ville, Rahuul)
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXIWG6bRYaUw0w6-@intel.com
DSC_Sink_BPP_Precision entry is added to i915_dsc_fec_support_show
to depict sink's precision.
Also, new debugfs entry is created to enforce fractional bpp.
If Force_DSC_Fractional_BPP_en is set then while iterating over
output bpp with fractional step size we will continue if output_bpp is
computed as integer. With this approach, we will be able to validate
DSC with fractional bpp.
v2:
Add drm_modeset_unlock to new line(Suraj)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-8-ankit.k.nautiyal@intel.com
Currently all module parameters are handled by i915_param.c/h. This
is a problem for display parameters when Xe driver is used. Add
a mechanism to add parameters specific to the display. This is mainly
copied from i915_[debugfs]_params.[ch]. Parameters are not yet moved. This
is done by subsequent patches.
v2:
- Drop unused predefinition (dentry)
- Clarify need for empty INTEL_DISPLAY_PARAMS_FOR_EACH in comment
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-2-jouni.hogander@intel.com
Create a separate debugfs entry to list the display capabilities
IGT can rely on this debugfs entry for tests that depend on
display device and display runtime info for both xe and i915
drivers.
v2: rename the entry to i915_display_capabilities (Chaitanya)
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018102723.16915-2-vinod.govindapillai@intel.com
- Remove watchdog timers for PSR on Lunar Lake (Mika Kahola)
- DSB changes for proper handling of LUT programming (Ville)
- Store DSC DPCD capabilities in the connector (Imre)
- Clean up zero initializers (Ville)
- Remove Meteor Lake force_probe protection (RK)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmUxVawACgkQ+mJfZA7r
E8pKKAf9H6aS95fUeIqrxzkzGVrZ/faOulxzvAG/a0BsNI7SlwAGkQt/z4XWevxY
iZmmJnIxggrP9pWObAZ2LWs6pDtWqzMt5NmuacHLWWdeOFYUaZosfRbQHPKt1WGN
fQFsHk+YKQX2ssi3yuHjGDsdN58pA44AI9d1pb6scmu61TPujmF8Mb9wc3CUCMEW
OrXGYhU18jvUoxyPeXAA29iYxn7BYOmw3Zj98ua5V9vopw/dY9UeVgiblz/ag43d
3fSelNPhTB6AYra0zlV4HQfbxSmWTiFbNsbEa8nC0aKqDlVD6LpDOM+ix5KLRwbP
OC08dzMNL7Oen6LRMyyPRymy6Fp1OQ==
=qQGI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-10-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Add new DG2 PCI IDs (Shekhar)
- Remove watchdog timers for PSR on Lunar Lake (Mika Kahola)
- DSB changes for proper handling of LUT programming (Ville)
- Store DSC DPCD capabilities in the connector (Imre)
- Clean up zero initializers (Ville)
- Remove Meteor Lake force_probe protection (RK)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZTFW4g6duLtp+Wy0@intel.com
Use the connector's DSC DPCD capabilities in i915_dsc_fec_support_show()
instead of the version stored in the encoder. Atm the two are identical,
but a follow-up patch will store the (MST) connector specific version
in the connector.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-6-imre.deak@intel.com
Cache the i915 specific device and connector pointers in
i915_dsc_fec_support_show().
v2:
- s/Cahce/Cache typo in commit log. (Stan)
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-5-imre.deak@intel.com
drm/i915 feature pull #2 for v6.7:
Features and functionality:
- Preparation for i915 display code reuse in upcoming Xe driver (Jani)
- Drop the fastboot module parameter and use the platform defaults (Arun)
- Enable new LNL FBC features (Vinod)
- Add LNL display feature capability reads (Vinod)
Refactoring and cleanups:
- Locally enable W=1 warnings by default in i915 (Jani)
- Move HDCP GSC message code to a separate file (Suraj)
- GVT include cleanups (Jani)
- Move more display init under display/ (Jani)
- DPLL ID refactoring (Ville)
- Better abstraction of GT0 (Jani)
- Move VGA decode function to GMCH code (Uma)
- Use local64_try_cmpxchg() to optimize PMU event read (Uros Bizjak)
- Clean up FBC checks (Ville)
- Constify and unify state checker calling conventions (Ville)
- Add display step name helper (Chaitanya)
Documentation:
- Update CCS and GSC CS documentation (Rodrigo)
- Fix a number of documentation typos (Randy Dunlap)
Fixes:
- VLV DSI fixes and quirks (Hans)
- Fix crtc state memory leaks (Suraj)
- Increase LSPCON mode settle timeout (Niko Tsirakis)
- Stop clobbering old crtc state during state check (Ville)
- Fix VLV color state readout (Ville)
- Fix cx0 PHY pipe reset to allow S0iX (Khaled)
- Ensure DP MST pbn_div is up-to-date after sink reconnect (Imre)
- Drop an unnecessary NULL check to fix static analyzer warning (Suraj)
- Use an explicit rather than implicit include for frontbuffer tracking (Jouni)
Merges:
- Backmerge drm-next to fix a conflict (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0m00xew.fsf@intel.com
No one really cares how we store the shared_dplls. Currently
it happens to be an array, but we could change that to a more
flexible scheme at some point. Hide the implementation details
behind an iterator macro.
The slight downside is the pll variable moving out of the
loop scope, but maybe someday soon we'll start to convert
everything over to having declarations within for-statements...
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003200620.11633-4-ville.syrjala@linux.intel.com
There's no good reason to keep around this PLL index == PLL ID
footgun. Get rid of it.
Both i915->shared_dplls[] and state->shared_dpll[] are indexed
by the same thing now, which is just the index we get at
initialization from dpll_mgr->dpll_info[]. The rest is all about
PLL IDs now.
v2: Add pll->index to mimic drm_crtc & co.
Remove the comment saying ID should match the index
v3: s/i/pll->index/ in debugfs loop (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003200620.11633-2-ville.syrjala@linux.intel.com
to_i915 is defined as
container_of(dev, struct drm_i915_private, drm);
So for a struct drm_device *dev, to_i915(dev)->drm is just dev. Simplify
accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230721212133.271118-1-u.kleine-koenig@pengutronix.de
Instead of mixing display & non-display stuff together, move
display specific clock info to new debugfs. This patch will
create a new debugfs "i915_cdclk_info" to expose Current & Max
cdclk and Max pixel clock frequency info.
Example:
$ cat /sys/kernel/debug/dri/0/i915_cdclk_info
Current CD clock frequency: 163200 kHz
Max CD clock frequency: 652800 kHz
Max pixel clock frequency: 1305600 kHz
V2: - s/i915_display_clock_info/i915_cdclk_info/ (Jani)
- Move the logic to intel_cdclk.c (Jani)
- Don't remove info from i915_frequency_info (Jani)
V3: - Drop locking (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413114502.1105288-1-bhanuprakash.modem@intel.com
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Function parameter or member 'intel_connector' not described in 'intel_connector_debugfs_add'
drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Excess function parameter 'connector' description in 'intel_connector_debugfs_add'
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-5-lee@kernel.org
DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show
to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444).
Also, new debugfs entry is created to enforce output format. This is
required because of our driver policy. For ex. if a mode is supported
in both RGB and YCbCr420 output formats by the sink, our policy is to
try RGB first and fall back to YCbCr420, if mode cannot be shown
using RGB. So, to test other output formats like YCbCr420 or YCbCr444,
we need a debugfs entry (force_dsc_output_format) to force this
output format.
v2: -Func name changed to intel_output_format_name() (Jani N)
-Return forced o/p format from intel_dp_output_format() (Jani N)
v3: -output_format_str[] to remain static (Jani N)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-8-suraj.kandpal@intel.com
The pipe may differ from crtc index if pipes are fused off. For testing
purposes, IGT needs to know the pipe.
There's already a I915_GET_PIPE_FROM_CRTC_ID IOCTL for this. However,
the upcoming Xe driver won't have that IOCTL, and going forward, we'll
want a unified interface for testing i915 and Xe, as they share the
display code. Thus add the debugfs for i915 display.
v2: User letters for pipe names (Ville)
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-2-jani.nikula@intel.com
Convert the crtc debugfs code to use struct intel_crtc instead of struct
drm_crtc.
v2: Fix build for CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=y (kernel test robot)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-1-jani.nikula@intel.com
Add new files intel_wm.[ch] and i9xx_wm.[ch] under display/ to hold
generic and pre-SKL watermark code, respectively. SKL+ watermark code
has already been split out to skl_watermark.[ch].
Use the _wm.[ch] naming for brevity; we may want to rename
skl_watermark.[ch] later accordingly.
Add new intel_wm_init() to call either skl_wm_init() or
i9xx_wm_init(i915) depending on the platform, the latter comprising of
the remains of intel_init_pm().
Sprinkle in some minor checkpatch fixes while moving the code.
v2:
- Rebase
- Fix copyright year
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ddf04a07a37f0368b3fef85d4ebb924082fec6cd.1676317696.git.jani.nikula@intel.com
Replaces wm.max_level with wm.num_levels, since that generally
results in nicer looking code (for-loops can be in standard
form etc.).
Also get rid of the two different wrappers we have for this
(ilk_wm_max_level() and intel_wm_num_levels()). They don't
really do anything for us other than potentially slow things
down if the compiler actually emits the function calls every
time (num_planes*num_wm_levels*higher_level_wm_function_calls
could be a big number). The watermark code already shows up
far too prominently in cpu profiles. Though I must admit that
I didn't look at the generated code this time.
v2: Fix the ilk_wm_merge() off-by-one (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209222504.31478-1-ville.syrjala@linux.intel.com
Switch ilk+ and skl+ platforms to also setting up
wm.max_level and remove a bunch of if ladders as a result.
There will be a tiny change in the debugfs on CHV machines
that have DVFS disabled in the BIOS. Presviously debugfs
would show the latency for the DVFS level as well, but
that will no longer be the case. Which is arguably better
as that number is absolutely meaningless when DVFS can't
be enabled anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209003251.32021-1-ville.syrjala@linux.intel.com
Since SAGV is controlled via unidirectional pcode commands
we have no way to query the current state. So instead let's
expose the last programmed state via debugfs. This way we
can at least know whether SAGV should be enabled or not
(which can be important to know when dealing with underruns/etc.).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.
Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.
Also some places actually needed i915_irq.h too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
