The mainline MTK ethernet driver suffers long time from rarly but
annoying tx queue timeouts. We think that this is caused by fixed
dma sizes hardcoded for all SoCs.
We suspect this problem arises from a low level of free TX DMADs,
the TX Ring alomost full.
The transmit timeout is caused by the Tx queue not waking up. The
Tx queue stops when the free counter is less than ring->thres, and
it will wake up once the free counter is greater than ring->thres.
If the CPU is too late to wake up the Tx queues, it may cause a
transmit timeout.
Therefore, we increased the TX and RX DMADs to improve this error
situation.
Use the dma-size implementation from SDK in a per SoC manner. In
difference to SDK we have no RSS feature yet, so all RX/TX sizes
should be raised from 512 to 2048 byte except fqdma on mt7988 to
avoid the tx timeout issue.
Fixes: 656e705243 ("net-next: mediatek: add support for MT7623 ethernet")
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ADMAv2.0 is plagued by RX hangs which can't easily detected and happen upon
receival of a corrupted Ethernet frame.
Use ADMAv1 instead which is also still present and usable, and doesn't
suffer from that problem.
Fixes: 197c9e9b17 ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset")
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/57cef74bbd0c243366ad1ff4221e3f72f437ec80.1715164770.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split tx and rx fields in mtk_soc_data struct. This is a preliminary
patch to roll back to ADMAv1 for MT7986 and MT7981 SoC in order to fix a
hw hang if the device receives a corrupted packet when using ADMAv2.0.
Fixes: 197c9e9b17 ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/70a799b1f060ec2f57883e88ccb420ac0fb0abb5.1715164770.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c945 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from the private struct by converting it
into a pointer. Then use the leverage the new alloc_netdev_dummy()
helper to allocate and initialize dummy devices.
[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240418161821.189263-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The WLAN + WED reset sequence relies on being able to receive interrupts from
the card, in order to synchronize individual steps with the firmware.
When WED is stopped, leave interrupts running and rely on the driver turning
off unwanted ones.
WED DMA also needs to be disabled before resetting.
Fixes: f78cd9c783 ("net: ethernet: mtk_wed: update mtk_wed_stop")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mtk_flow_entry_update_l2, the hwe->ib1 is read using READ_ONCE at the
beginning of the function, checked, and then re-read from hwe->ib1,
may void all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the ib1 throughout the function.
Signed-off-by: linke li <lilinke99@qq.com>
Link: https://lore.kernel.org/r/tencent_C699E9540505523424F11A9BD3D21B86840A@qq.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
disabling the PPE. This can potentially lead to a hang during the process
of disabling the PPE.
Without this patch, the PPE may experience a hang during the reboot test.
Link: b40da332df
Fixes: ba37b7caf1 ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Suggested-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early
can result in MAC ending up in a broken/blocked state.
Fix this by handling this bit in the .mac_link_up and .mac_link_down
calls instead of in .mac_finish.
Fixes: b8fc9f3082 ("net: ethernet: mediatek: Add basic PHYLINK support")
Suggested-by: Mason-cw Chang <Mason-cw.Chang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When draining a page_frag_cache, most user are doing
the similar steps, so introduce an API to avoid code
duplication.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Set DMA coherent mask to 32-bit which makes PPE offloading engine start
working on BPi-R4 which got 4 GiB of RAM.
Fixes: 2d75891ebc ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988")
Suggested-by: Elad Yifee <eladwf@users.github.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/97e90925368b405f0974b9b15f1b7377c4a329ad.1706113251.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to avoid a NULL pointer dereference, check entry->buf pointer before running
skb_free_frag in mtk_wed_wo_queue_tx_clean routine.
Fixes: 799684448e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/3c1262464d215faa8acebfc08869798c81c96f4a.1702827359.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify the code and use __dev_alloc_page() instead of __dev_alloc_pages()
with order 0 in mtk_wed_tx_buffer_alloc routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The WED mcu firmware does not contain all the memory regions defined in
the dts reserved_memory node (e.g. MT7986 WED firmware does not contain
cpu-boot region).
Reverse the mtk_wed_mcu_run_firmware() logic to check all the fw
sections are defined in the dts reserved_memory node.
Fixes: c6d961aeaa ("net: ethernet: mtk_wed: move mem_region array out of mtk_wed_mcu_load_firmware")
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/d983cbfe8ea562fef9264de8f0c501f7d5705bd5.1698098381.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While searching for possible refactor of napi_schedule_prep and
__napi_schedule it was notice that the mtk eth driver disable the
interrupt for rx and tx AFTER napi is scheduled.
While this is a very hard to repro case it might happen to have
situation where the interrupt is disabled and never enabled again as the
napi completes and the interrupt is enabled before.
This is caused by the fact that a napi driven by interrupt expect a
logic with:
1. interrupt received. napi prepared -> interrupt disabled -> napi
scheduled
2. napi triggered. ring cleared -> interrupt enabled -> wait for new
interrupt
To prevent this case, disable the interrupt BEFORE the napi is
scheduled.
Fixes: 656e705243 ("net-next: mediatek: add support for MT7623 ethernet")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231002140805.568-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xdp_do_flush_map() is deprecated and new code should use xdp_do_flush()
instead.
Replace xdp_do_flush_map() with xdp_do_flush().
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Clark Wang <xiaoning.wang@nxp.com>
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: David Arinzon <darinzon@amazon.com>
Cc: Edward Cree <ecree.xilinx@gmail.com>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: John Crispin <john@phrozen.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Mark Lee <Mark-MC.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Noam Dagan <ndagan@amazon.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Shay Agroskin <shayagr@amazon.com>
Cc: Shenwei Wang <shenwei.wang@nxp.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230908143215.869913-2-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce support for resetting Wireless Ethernet Dispatcher 3.0
available on MT988 SoC.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move specific WED2.0 debugfs entries out of regs array. This is a
preliminary patch to introduce WED 3.0 debugfs info.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
MT7988 SoC support 802.11 receive reordering offload in hw while
MT7986 SoC implements it through the firmware running on the mcu.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce partial AMSDU offload support for MT7988 SoC in order to merge
in hw packets belonging to the same AMSDU before passing them to the
WLAN nic.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor mtk_wed_check_wfdma_rx_fill() in order to be reused adding HW
receive offload support for MT7988 SoC.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to MT7986 and MT7622, enable Wireless Ethernet Ditpatcher for
MT7988 in order to offload traffic forwarded from LAN/WLAN to WLAN/LAN
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH and
MTK_WED_EXT_INT_STATUS_RX_FBUF_HI_TH definitions for MT7986 (MT7986 is
the only SoC to use them).
Fixes: de84a090d9 ("net: ethernet: mtk_eth_wed: add wed support for mt7986 chipset")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make mtk_wed_wo_memory_region optionals.
This is a preliminary patch to introduce Wireless Ethernet Dispatcher
support for MT7988 SoC since MT7988 WED fw image will have a different
layout.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove mtk_wed_wo_memory_region boot structure in mtk_wed_wo.
This is a preliminary patch to introduce WED support for MT7988 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce mtk_wed_buf structure to store both virtual and physical
addresses allocated in mtk_wed_tx_buffer_alloc() routine. This is a
preliminary patch to add WED support for MT7988 SoC since it relies on a
different dma descriptor layout not storing page dma addresses.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename mtk_rxbm_desc structure in mtk_wed_bm_desc since it will be used
even on tx side by MT7988 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Check if rx offload is supported running mtk_wed_get_rx_capa routine
before configuring it. This is a preliminary patch to introduce Wireless
Ethernet Dispatcher (WED) support for MT7988 SoC.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to mtk_eth_soc, introduce the following wed versioning
utility routines:
- mtk_wed_is_v1
- mtk_wed_is_v2
This is a preliminary patch to introduce WED support for MT7988 SoC
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Check if wlan.offload_enable and wlan.offload_disable callbacks are set
in mtk_wed_flow_add/mtk_wed_flow_remove since mt7996 will not rely
on them.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
MT7988 SoC support 3 NICs. Fix pse_port configuration in
mtk_flow_set_output_device routine if the traffic is offloaded to eth2.
Rely on mtk_pse_port definitions.
Fixes: 88efedf517 ("net: ethernet: mtk_eth_soc: enable nft hw flowtable_offload for MT7988 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable dma_addr in function mtk_poll_rx can be uninitialized on
some of the error paths. In practise this doesn't matter, even random
data present in uninitialized stack memory can safely be used in the
way it happens in the error path.
However, in order to make Smatch happy make sure the variable is
always initialized.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference.
Fixes: 7aab747e55 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Systems having 4 GiB of RAM and more require DMA addressing beyond the
current 32-bit limit. Starting from MT7988 the hardware now supports
36-bit DMA addressing, let's use that new capability in the driver to
avoid running into swiotlb on systems with 4 GiB of RAM or more.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/95b919c98876c9e49761e44662e7c937479eecb8.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
