In case of region creation fail in ipc_devlink_create_region(), previously
created regions delete process starts from tainted pointer which actually
holds error code value.
Fix this bug by decreasing region index before delete.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4dcd183fbd ("net: wwan: iosm: devlink registration")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240604082500.20769-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Runtime power management support breaks Intel LTE modem where dmesg dump
showes timeout errors:
```
[ 72.027442] iosm 0000:01:00.0: msg timeout
[ 72.531638] iosm 0000:01:00.0: msg timeout
[ 73.035414] iosm 0000:01:00.0: msg timeout
[ 73.540359] iosm 0000:01:00.0: msg timeout
```
Furthermore, when shutting down with `poweroff` and modem attached, the
system rebooted instead of powering down as expected. The modem works
again only after power cycling.
Revert runtime power management support for IOSM driver as introduced by
commit e4f5073d53 ("net: wwan: iosm: enable runtime pm support for
7560").
Fixes: e4f5073d53 ("net: wwan: iosm: enable runtime pm support for 7560")
Reported-by: Martin <mwolf@adiumentum.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996
Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct mux_adth actually ends with multiple struct mux_adth_dg members.
This is seen both in the comments about the member:
/**
* struct mux_adth - Structure of the Aggregated Datagram Table Header.
...
* @dg: datagramm table with variable length
*/
and in the preparation for populating it:
adth_dg_size = offsetof(struct mux_adth, dg) +
ul_adb->dg_count[i] * sizeof(*dg);
...
adth_dg_size -= offsetof(struct mux_adth, dg);
memcpy(&adth->dg, ul_adb->dg[i], adth_dg_size);
This was reported as a run-time false positive warning:
memcpy: detected field-spanning write (size 16) of single field "&adth->dg" at drivers/net/wwan/iosm/iosm_ipc_mux_codec.c:852 (size 8)
Adjust the struct mux_adth definition and associated sizeof() math; no binary
output differences are observed in the resulting object file.
Reported-by: Florian Klink <flokli@flokli.de>
Closes: https://lore.kernel.org/lkml/dbfa25f5-64c8-5574-4f5d-0151ba95d232@gmail.com/
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Cc: M Chetan Kumar <m.chetan.kumar@intel.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620194234.never.023-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adds runtime pm support for 7560.
As part of probe procedure auto suspend is enabled and auto suspend
delay is set to 5000 ms for runtime pm use. Later auto flag is set
to power manage the device at run time.
On successful communication establishment between host and device the
device usage counter is dropped and request to put the device into
sleep state (suspend).
In TX path, the device usage counter is raised and device is moved out
of sleep(resume) for data transmission. In RX path, if the device has
some data to be sent it request host platform to change the power state
by giving PCI PME message.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/freescale/fec_main.c
6ead9c98ca ("net: fec: remove the xdp_return_frame when lack of tx BDs")
144470c88c ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In suspend and resume cycle, the removal and rescan of device ends
up in NULL pointer dereference.
During driver initialization, if the ipc_imem_wwan_channel_init()
fails to get the valid device capabilities it returns an error and
further no resource (wwan struct) will be allocated. Now in this
situation if driver removal procedure is initiated it would result
in NULL pointer exception since unallocated wwan struct is dereferenced
inside ipc_wwan_deinit().
ipc_imem_run_state_worker() to handle the called functions return value
and to release the resource in failure case. It also reports the link
down event in failure cases. The user space application can handle this
event to do a device reset for restoring the device communication.
Fixes: 3670970dd8 ("net: iosm: shared memory IPC interface")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch reports:
drivers/net/wwan/iosm/iosm_ipc_pcie.c:298 ipc_pcie_probe()
warn: missing unwind goto?
When dma_set_mask fails it directly returns without disabling pci
device and freeing ipc_pcie. Fix this my calling a correct goto label
As dma_set_mask returns either 0 or -EIO, we can use a goto label, as
it finally returns -EIO.
Add a set_mask_fail goto label which stands consistent with other goto
labels in this function..
Fixes: 035e3befc1 ("net: wwan: iosm: fix driver not working with INTEL_IOMMU disabled")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ModemManger/Apps probing the wwan0xmmrpc0 port for 7560 Modem results in
modem crash.
7560 Modem FW uses the MBIM interface for control command communication
whereas 7360 uses Intel RPC interface so disable wwan0xmmrpc0 port for
7560.
Fixes: d08b0f8f46 ("net: wwan: iosm: add rpc interface for xmm modems")
Reported-and-tested-by: Martin <mwolf@adiumentum.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217200
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Shane Parslow <shaneparslow808@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
wwan_port_fops_write inputs the SKB parameter to the TX callback of
the WWAN device driver. However, the WWAN device (e.g., t7xx) may
have an MTU less than the size of SKB, causing the TX buffer to be
sliced and copied once more in the WWAN device driver.
This patch implements the slicing in the WWAN subsystem and gives
the WWAN devices driver the option to slice(by frag_len) or not. By
doing so, the additional memory copy is reduced.
Meanwhile, this patch gives WWAN devices driver the option to reserve
headroom in fragments for the device-specific metadata.
Signed-off-by: haozhe chang <haozhe.chang@mediatek.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20230316095826.181904-1-haozhe.chang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb passed to network layer contains incorrect length.
In mux aggregation protocol, the datagram block received
from device contains block signature, packet & datagram
header. The right skb len to be calculated by subracting
datagram pad len from datagram length.
Whereas in mux lite protocol, the skb contains single
datagram so skb len is calculated by subtracting the
packet offset from datagram header.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peek throughput UL test is resulting in crash. If the UL
transfer block free list is exhaust, the peeked skb is freed.
In the next transfer freed skb is referred from UL list which
results in crash.
Don't free the skb if UL transfer blocks are unavailable. The
pending skb will be picked for transfer on UL transfer block
available.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build error reported on armhf while preparing 6.1-rc5
for Debian.
iosm_ipc_protocol.c:244:36: error: passing argument 3 of
'dma_alloc_coherent' from incompatible pointer type.
Change phy_ap_shm type from phys_addr_t to dma_addr_t.
Fixes: faed4c6f6f ("net: iosm: shared memory protocol")
Reported-by: Bonaccorso Salvatore <carnil@debian.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sparse warnings - iosm_ipc_mux_codec.c:1474 using plain
integer as NULL pointer.
Use skb_trim() to reset skb tail & len.
Fixes: 9413491e20 ("net: iosm: encode or decode datagram")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI
memory, because we need to track the allocation of acpi_object when
ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree().
Fixes: d38a648d2d ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Include linux/vmalloc.h in iosm_ipc_coredump.c &
iosm_ipc_devlink.c to resolve kernel test robot errors.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Data stall seen during peak DL throughput test & packets are
dropped by mux layer due to invalid header type in datagram.
During initlization Mux aggregration protocol is set to default
UL/DL size and TD count of Mux lite protocol. This configuration
mismatch between device and driver is resulting in data stall/packet
drops.
Override the UL/DL size and TD count for Mux aggregation protocol.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With INTEL_IOMMU disable config or by forcing intel_iommu=off from
grub some of the features of IOSM driver like browsing, flashing &
coredump collection is not working.
When driver calls DMA API - dma_map_single() for tx transfers. It is
resulting in dma mapping error.
Set the device DMA addressing capabilities using dma_set_mask() and
remove the INTEL_IOMMU dependency in kconfig so that driver follows
the platform config either INTEL_IOMMU enable or disable.
Fixes: f7af616c63 ("net: iosm: infrastructure")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to
obtain the wwan power state configuration from BIOS but is
not freeing the acpi_object. The acpi_evaluate_dsm() returned
acpi_object to be freed.
Free the acpi_object after use.
Fixes: 7e98d785ae ("net: iosm: entry point")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These WWAN network interface operations (create/delete/open/close)
are already protected by RTNL lock, i.e., wwan_ops.newlink(),
wwan_ops.dellink(), net_device_ops.ndo_open() and
net_device.ndo_stop() are called with RTNL lock held.
Therefore, this patch removes the unnecessary if_mutex.
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IOSM driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().
Fixes: 2a54f2c779 ("net: iosm: net driver")
Signed-off-by: HW He <hw.he@mediatek.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new iosm wwan port that connects to the modem rpc interface. This
interface provides a configuration channel, and in the case of the 7360, is
the only way to configure the modem (as it does not support mbim).
The new interface is compatible with existing software, such as
open_xdatachannel.py from the xmm7360-pci project [1].
[1] https://github.com/xmm7360/xmm7360-pci
Signed-off-by: Shane Parslow <shaneparslow808@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
wwan_register_ops calls wwan_create_default_link, which ends up in the
ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this
mutex is not yet initialized by that point. Fix it by moving mutex_init
above the wwan_register_ops call. This also makes the order of
operations in ipc_wwan_init symmetric to ipc_wwan_deinit.
Fixes: 83068395bb ("net: iosm: create default link via WWAN core")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use skb_put_data() instead of skb_put() and memcpy(), which is clear.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20220927023254.30342-1-shangxiaojing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of ipc_wwan_link_transmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20220912214455.929028-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC array-bounds warns that ipc_coredump_get_list() under-allocates
the size of struct iosm_cd_table *cd_table.
This is avoidable - we just need a flexible array. Nothing calls
sizeof() on struct iosm_cd_list or anything that contains it.
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20220520060013.2309497-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC 12 warns:
drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’:
drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress]
406 | if (!IPC_CB(skb)) {
| ^
Indeed the check seems entirely pointless. Hopefully the other
validation checks will catch if the cb is bad, but it can't be
NULL.
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Post debugfs use call wwan_put_debugfs_dir()to drop
debugfs dev reference.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables Intel M.2 7360 WWAN card support on
IOSM Driver.
Control path implementation is a reuse whereas data path
implementation it uses a different protocol called as MUX
Aggregation. The major portion of this patch covers the MUX
Aggregation protocol implementation used for IP traffic
communication.
For M.2 7360 WWAN card, driver exposes 2 wwan AT ports for
control communication. The user space application or the
modem manager to use wwan AT port for data path establishment.
During probe, driver reads the mux protocol device capability
register to know the mux protocol version supported by device.
Base on which the right mux protocol is initialized for data
path communication.
An overview of an Aggregation Protocol
1> An IP packet is encapsulated with 16 octet padding header
to form a Datagram & the start offset of the Datagram is
indexed into Datagram Header (DH).
2> Multiple such Datagrams are composed & the start offset of
each DH is indexed into Datagram Table Header (DTH).
3> The Datagram Table (DT) is IP session specific & table_length
item in DTH holds the number of composed datagram pertaining
to that particular IP session.
4> And finally the offset of first DTH is indexed into DBH (Datagram
Block Header).
So in TX/RX flow Datagram Block (Datagram Block Header + Payload)is
exchanged between driver & device.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on BIOS configuration IOSM driver exchanges
protocol required for putting device into D3L2 or D3L1.2.
ipc_pcie_suspend_s2idle() is implemented to put device to D3L1.2.
This patch forces PCI core know this device should stay at D0.
- pci_save_state()is expensive since it does a lot of slow PCI
config reads.
The reported issue is not observed on x86 platform. The supurios
wake on AMD platform needs to be futher debugged with orignal patch
submitter [1]. Also the impact of adding pci_save_state() needs to be
assessed by testing it on other platforms.
This reverts commit f4dd5174e273("net: wwan: iosm: Keep device
at D0 for s2idle case").
[1] https://lore.kernel.org/all/20211224081914.345292-2-kai.heng.feng@canonical.com/
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Link: https://lore.kernel.org/r/20220104150213.1894-1-m.chetan.kumar@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are seeing spurious wakeup caused by Intel 7560 WWAN on AMD laptops.
This prevent those laptops to stay in s2idle state.
>From what I can understand, the intention of ipc_pcie_suspend() is to
put the device to D3cold, and ipc_pcie_suspend_s2idle() is to keep the
device at D0. However, the device can still be put to D3hot/D3cold by
PCI core.
So explicitly let PCI core know this device should stay at D0, to solve
the spurious wakeup.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pci_pm_suspend_noirq() and pci_pm_resume_noirq() already handle power
transition for system-wide suspend and resume, so it's not necessary to
do it in the driver.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix checkpatch warning in iosm_ipc_mmio.c
- Alignment should match open parenthesis
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipc_wwan_tx_flowctrl() is declared in iosm_ipc_wwan.h but is
not defined.
Removed the dead code.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If there is no active IP session (interface up & running) then
release the data channel.
Use nr_sessions variable to track current active IP sessions.
If the count drops to 0, then send pipe close ctrl message to
release the data channel.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set wwan net dev tx queue len to DEFAULT_TX_QUEUE_LEN.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
