Runtime power management support breaks Intel LTE modem where dmesg dump
showes timeout errors:
```
[ 72.027442] iosm 0000:01:00.0: msg timeout
[ 72.531638] iosm 0000:01:00.0: msg timeout
[ 73.035414] iosm 0000:01:00.0: msg timeout
[ 73.540359] iosm 0000:01:00.0: msg timeout
```
Furthermore, when shutting down with `poweroff` and modem attached, the
system rebooted instead of powering down as expected. The modem works
again only after power cycling.
Revert runtime power management support for IOSM driver as introduced by
commit e4f5073d53 ("net: wwan: iosm: enable runtime pm support for
7560").
Fixes: e4f5073d53 ("net: wwan: iosm: enable runtime pm support for 7560")
Reported-by: Martin <mwolf@adiumentum.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996
Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds runtime pm support for 7560.
As part of probe procedure auto suspend is enabled and auto suspend
delay is set to 5000 ms for runtime pm use. Later auto flag is set
to power manage the device at run time.
On successful communication establishment between host and device the
device usage counter is dropped and request to put the device into
sleep state (suspend).
In TX path, the device usage counter is raised and device is moved out
of sleep(resume) for data transmission. In RX path, if the device has
some data to be sent it request host platform to change the power state
by giving PCI PME message.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch reports:
drivers/net/wwan/iosm/iosm_ipc_pcie.c:298 ipc_pcie_probe()
warn: missing unwind goto?
When dma_set_mask fails it directly returns without disabling pci
device and freeing ipc_pcie. Fix this my calling a correct goto label
As dma_set_mask returns either 0 or -EIO, we can use a goto label, as
it finally returns -EIO.
Add a set_mask_fail goto label which stands consistent with other goto
labels in this function..
Fixes: 035e3befc1 ("net: wwan: iosm: fix driver not working with INTEL_IOMMU disabled")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI
memory, because we need to track the allocation of acpi_object when
ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree().
Fixes: d38a648d2d ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With INTEL_IOMMU disable config or by forcing intel_iommu=off from
grub some of the features of IOSM driver like browsing, flashing &
coredump collection is not working.
When driver calls DMA API - dma_map_single() for tx transfers. It is
resulting in dma mapping error.
Set the device DMA addressing capabilities using dma_set_mask() and
remove the INTEL_IOMMU dependency in kconfig so that driver follows
the platform config either INTEL_IOMMU enable or disable.
Fixes: f7af616c63 ("net: iosm: infrastructure")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to
obtain the wwan power state configuration from BIOS but is
not freeing the acpi_object. The acpi_evaluate_dsm() returned
acpi_object to be freed.
Free the acpi_object after use.
Fixes: 7e98d785ae ("net: iosm: entry point")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables Intel M.2 7360 WWAN card support on
IOSM Driver.
Control path implementation is a reuse whereas data path
implementation it uses a different protocol called as MUX
Aggregation. The major portion of this patch covers the MUX
Aggregation protocol implementation used for IP traffic
communication.
For M.2 7360 WWAN card, driver exposes 2 wwan AT ports for
control communication. The user space application or the
modem manager to use wwan AT port for data path establishment.
During probe, driver reads the mux protocol device capability
register to know the mux protocol version supported by device.
Base on which the right mux protocol is initialized for data
path communication.
An overview of an Aggregation Protocol
1> An IP packet is encapsulated with 16 octet padding header
to form a Datagram & the start offset of the Datagram is
indexed into Datagram Header (DH).
2> Multiple such Datagrams are composed & the start offset of
each DH is indexed into Datagram Table Header (DTH).
3> The Datagram Table (DT) is IP session specific & table_length
item in DTH holds the number of composed datagram pertaining
to that particular IP session.
4> And finally the offset of first DTH is indexed into DBH (Datagram
Block Header).
So in TX/RX flow Datagram Block (Datagram Block Header + Payload)is
exchanged between driver & device.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on BIOS configuration IOSM driver exchanges
protocol required for putting device into D3L2 or D3L1.2.
ipc_pcie_suspend_s2idle() is implemented to put device to D3L1.2.
This patch forces PCI core know this device should stay at D0.
- pci_save_state()is expensive since it does a lot of slow PCI
config reads.
The reported issue is not observed on x86 platform. The supurios
wake on AMD platform needs to be futher debugged with orignal patch
submitter [1]. Also the impact of adding pci_save_state() needs to be
assessed by testing it on other platforms.
This reverts commit f4dd5174e273("net: wwan: iosm: Keep device
at D0 for s2idle case").
[1] https://lore.kernel.org/all/20211224081914.345292-2-kai.heng.feng@canonical.com/
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Link: https://lore.kernel.org/r/20220104150213.1894-1-m.chetan.kumar@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are seeing spurious wakeup caused by Intel 7560 WWAN on AMD laptops.
This prevent those laptops to stay in s2idle state.
>From what I can understand, the intention of ipc_pcie_suspend() is to
put the device to D3cold, and ipc_pcie_suspend_s2idle() is to keep the
device at D0. However, the device can still be put to D3hot/D3cold by
PCI core.
So explicitly let PCI core know this device should stay at D0, to solve
the spurious wakeup.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pci_pm_suspend_noirq() and pci_pm_resume_noirq() already handle power
transition for system-wide suspend and resume, so it's not necessary to
do it in the driver.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate some boilerplate code by using module_pci_driver() instead of
init/exit, moving the salient bits from init into probe.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Register IOSM driver with kernel to manage Intel WWAN PCIe
device(PCI_VENDOR_ID_INTEL, INTEL_CP_DEVICE_7560_ID).
2) Exposes the EP PCIe device capability to Host PCIe core.
3) Initializes PCIe EP configuration and defines PCIe driver probe, remove
and power management OPS.
4) Allocate and map(dma) skb memory for data communication from device to
kernel and vice versa.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
