All seem to call it with ctrl->cap so no need to pass it
at all.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
nvme_enable_ctrl reads the cap register right after, so
no need to do that locally in the transport driver. Have
sqsize setting in nvme_init_identify.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
One of the components in LiteON CL1 device has limitations that
can be encountered based upon boundary race conditions using the
nvme bus specific suspend to idle flow.
When this situation occurs the drive doesn't resume properly from
suspend-to-idle.
LiteON has confirmed this problem and fixed in the next firmware
version. As this firmware is already in the field, avoid running
nvme specific suspend to idle flow.
Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Charles Hyde <charles.hyde@dellteam.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=f6DS
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into this series. This contains:
- Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
were still corner cases there, and even though I had a solution for
it, it's too involved for this stage. (me)
- Set of NVMe fixes (via Sagi)
- io_uring fix for fixed buffers (Anthony)
- io_uring defer issue fix (Jackie)
- Regression fix for queue sync at exit time (zhengbin)
- xen blk-back memory leak fix (Wenwen)"
* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
block: remove REQ_NOWAIT_INLINE
io_uring: fix manual setup of iov_iter for fixed buffers
xen/blkback: fix memory leaks
blk-mq: move cancel of requeue_work to the front of blk_exit_queue
nvme-pci: Fix async probe remove race
nvme: fix controller removal race with scan work
nvme-rdma: fix possible use-after-free in connect error flow
nvme: fix a possible deadlock when passthru commands sent to a multipath device
nvme-core: Fix extra device_put() call on error path
nvmet-file: fix nvmet_file_flush() always returning an error
nvmet-loop: Flush nvme_delete_wq when removing the port
nvmet: Fix use-after-free bug when a port is removed
nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
One of the modifications made by commit d916b1be94 ("nvme-pci: use
host managed power state for suspend") was adding a pci_save_state()
call to nvme_suspend() so as to instruct the PCI bus type to leave
devices handled by the nvme driver in D0 during suspend-to-idle.
That was done with the assumption that ASPM would transition the
device's PCIe link into a low-power state when the device became
inactive. However, if ASPM is disabled for the device, its PCIe
link will stay in L0 and in that case commit d916b1be94 is likely
to cause the energy used by the system while suspended to increase.
Namely, if the device in question works in accordance with the PCIe
specification, putting it into D3hot causes its PCIe link to go to
L1 or L2/L3 Ready, which is lower-power than L0. Since the energy
used by the system while suspended depends on the state of its PCIe
link (as a general rule, the lower-power the state of the link, the
less energy the system will use), putting the device into D3hot
during suspend-to-idle should be more energy-efficient that leaving
it in D0 with disabled ASPM.
For this reason, avoid leaving NVMe devices with disabled ASPM in D0
during suspend-to-idle. Instead, shut them down entirely and let
the PCI bus type put them into D3.
Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: https://lore.kernel.org/linux-pm/2763495.NmdaWeg79L@kreacher/T/#t
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
When aborting in-flight request for recovering controller, we have
to make sure that queue's complete function is called on completed
request before moving on. Otherwise, for example, the warning of
WARN_ON_ONCE(qp->mrs_used > 0) in ib_destroy_qp_user() may be
triggered on nvme-rdma.
Fix this issue by using blk_mq_tagset_wait_completed_request.
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure the controller is not in the NEW state when nvme_probe() exits.
This will always allow a subsequent nvme_remove() to set the state to
DELETING, fixing a potential race between the initial asynchronous probe
and device removal.
Reported-by: Li Zhong <lizhongfs@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This reverts commit 0298d54352.
With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0'
in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps
equals to 2 and nvme_pci_map_queues will not do map for poll queues.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a
system with more than one of these SSDs will only have one usable.
[ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C).
[ 0.943017] nvme nvme1: Removing after probe failure status: -22
02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
There are no firmware updates available from the vendor, unfortunately.
Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves
the issue, and they all work after this patch:
/dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...]
/dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...]
Signed-off-by: Misha Nasledov <misha@nasledov.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When running a NVMe device that is attached to a addressing
challenged PCIe root port that requires bounce buffering, our
request sizes can easily overflow the swiotlb bounce buffer
size. Limit the maximum I/O size to the limit exposed by
the DMA mapping subsystem.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Atish Patra <Atish.Patra@wdc.com>
Tested-by: Atish Patra <Atish.Patra@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Modify nvme_alloc_sq_cmds() to call pci_free_p2pmem() to free the memory
it allocated using pci_alloc_p2pmem() in case pci_p2pmem_virt_to_bus()
returns null.
Makes sure not to call pci_free_p2pmem() if pci_alloc_p2pmem() returned
NULL, which can happen if CONFIG_PCI_P2PDMA is not configured.
The current implementation is not expected to leak since
pci_p2pmem_virt_to_bus() is expected to fail only if pci_alloc_p2pmem()
returns null. However, checking the return value of pci_alloc_p2pmem()
is more explicit.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Only request an IRQ mapping for read queues if at least one read queue
is being allocted, as nvme_pci_map_queues() will later on ignore the
unnecessary mapping request should nvme_dev_add() request such an IRQ
mapping even though no read queues are being allocated. However,
nvme_dev_add() can avoid making the request by checking the number of
read queues without assuming. This would bring it more in line with
nvme_setup_irqs() and nvme_calc_irq_sets().
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since Linux 5.0 drivers can safely set the largest DMA mask supported
by the device, and don't need fallbacks to work around the dma mapping
implementations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Fix sparse warning:
drivers/nvme/host/pci.c:2926:25: warning:
symbol 'nvme_dev_pm_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the status parameter o nvme_remove_dead_ctrl(), which is only
used for printing it.
We move the print message to the same function where actual error is
occurring.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to
be like:
[ 293.689160] nvme nvme0: failed to mark controller CONNECTING
[ 293.689160] nvme nvme0: Removing after probe failure status: 0
Even it prints the first line to indicate the situation, the second line
is not proper because the status is 0 which means normally success of
the previous operation.
This patch makes it indicate the proper error value when it fails.
[ 25.932367] nvme nvme0: failed to mark controller CONNECTING
[ 25.932369] nvme nvme0: Removing after probe failure status: -16
This situation is able to be easily reproduced by:
root@target:~# rmmod nvme && modprobe nvme && rmmod nvme
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch removes the confusing assignment of the variable result at
the time of declaration and sets the value in error cases next to the
places where the actual error is happening.
Here we also set the result value to -ENODEV when we fail at the final
ctrl state transition in nvme_reset_work(). Without this assignment
result will hold 0 from nvme_setup_io_queue() and on failure 0 will be
passed to he nvme_remove_dead_ctrl() from final state transition.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
queue_count_set() seems like that it has been provided to limit the
number of queue entries for write/poll queues. But, the
queue_count_set() has been doing nothing but a parameter check even it
has num_possible_cpus() which is nop.
This patch removes entire queue_count_ops from the write_queues and
poll_queues.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
poll_queues will be zero even without zero initialization here.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme pci driver prepares its devices for power loss during suspend
by shutting down the controllers. The power setting is deferred to
pci driver's power management before the platform removes power. The
suspend-to-idle mode, however, does not remove power.
NVMe devices that implement host managed power settings can achieve
lower power and better transition latencies than using generic PCI power
settings. Try to use this feature if the platform is not involved with
the suspend. If successful, restore the previous power state on resume.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[hch: fixed the compilation for the !CONFIG_PM_SLEEP case]
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMe uses PRPs (or optionally unlimited SGLs) for data transfers and
has no specific limit for a single DMA segement. Limiting the size
will cause problems because the block layer assumes PRP-ish devices
using a virt boundary mask don't have a segment limit. And while this
is true, we also really need to tell the DMA mapping layer about it,
otherwise dma-debug will trip over it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A controller with multiple namespaces may have multiple request_queues with
their own timeout work. If a controller fails with IO outstanding to
diffent namespaces, each request queue may attempt to handle it, so
ensure there is no previously scheduled timeout work executing prior to
starting controller initialization by synchronizing with each queue.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
The reset_work waits for queued IO to complete before setting the
controller to live. If any of these times out and requeues, we won't be
able to restart the controller because the reset_work is already running.
Flush all entered requests to a failed completion if a timeout occurs
in the connecting state, and ensure the controller can't transition to
the live state after we've unblocked it from waiting for completions.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
The reset state doesn't dispatch commands that it needs to wait for
anymore. If a timeout occurs in this state, the reset work is already
disabling the controller, so just reset the request's timer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
If a controller disabling didn't start a freeze, don't wait for the
operation to complete.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/nvme/host/pci.c: In function ‘nvme_timeout’:
drivers/nvme/host/pci.c:1298:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
shutdown = true;
~~~~~~~~~^~~~~~
drivers/nvme/host/pci.c:1299:2: note: here
case NVME_CTRL_CONNECTING:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The spec states:
"The settings are not retained across a Controller Level Reset"
Therefore the driver must enable the shadow doorbell, after each reset.
This was caught while testing the nvme driver over upcoming nvme-mdev
device.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most command aren't PCIe specific, so move the size checking for them
to core.c
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
All the NVMe command has 64bytes fixed size so that it has been assured
with BUILD_BUG_ON(). The remaining command structures in linux/nvme.h
also need to be checked here.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Variable "n" will be assigned once kstrtoint() succeeds, otherwise it
will not be referred because kstrtoint() will return an error which
means go out from this function.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Just like IO queues, the admin queue also will not be restarted after a
controller shutdown. Unquiesce this queue so that we do not block
request dispatch on a permanently disabled controller.
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We do not restart a controller in a deleting state for timeout errors.
When in this state, unblock potential request dispatchers with failed
completions by shutting down the controller on timeout detection.
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The shortcut for single segment SGL requests did not set the PSDT field
to mark the request as using SGLs.
Fixes: 297910571f ("nvme-pci: optimize mapping single segment requests using SGLs")
Signed-off-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove two pointless local variables, remove ret assignment that is
never used, move the use_sgl initialization closer to where it is used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
If the controller supports SGLs we can take another short cut for single
segment request, given that we can always map those without another
indirection structure, and thus don't need to create a scatterlist
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
If a request is single segment and fits into one or two PRP entries we
do not have to create a scatterlist for it, but can just map the bio_vec
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
We'll have a better way to optimize for small I/O that doesn't
require it soon, so remove the existing inline_sg case to make that
optimization easier to implement.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
This prepares for some bigger changes to the data mapping helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
We always have exactly one segment, so we can simply call dma_map_bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
This mirrors how nvme_map_pci is called and will allow simplifying some
checks in nvme_unmap_pci later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
This means we now have a function that undoes everything nvme_map_data
does and we can simplify the error handling a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cleaning up the command setup isn't related to unmapping data, and
disentangling them will simplify error handling a bit down the road.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
nvme_init_iod should really be split into two parts: initialize a few
general iod fields, which can easily be done at the beginning of
nvme_queue_rq, and allocating the scatterlist if needed, which logically
belongs into nvme_map_data with the code making use of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
We don't need to save the dma device as it's not used in the hot path
and hasn't in a long time. Shrink the struct nvme_queue removing this
unnecessary member.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
