Move Intel Cherry Trail Dollar Cove TI power button driver
to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel Broxton Whiskey Cove TMU driver to intel sub-directory
to improve readability.
While at it, spell BXT fully in the Kconfig and switch to select REGMAP.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The kernel doc validator complains:
.../ipc.c:478: warning: expecting prototype for intel_scu_ipc_command_with_size(). Prototype was for intel_scu_ipc_dev_command_with_size() instead
Fix the prototype name in the kernel documentation.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add initial support for platform_profile where the support is
based on availability of ASUS_THROTTLE_THERMAL_POLICY.
Because throttle_thermal_policy is used by platform_profile and is
writeable separately to platform_profile any userspace changes to
throttle_thermal_policy need to notify platform_profile.
In future throttle_thermal_policy sysfs should be removed so that
only one method controls the laptop power profile.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210818190731.19170-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for the difference between various models:
- Use dmi to detect laptop model.
- 2019 and newer models use _wmbb method to set battery charge limit.
Signed-off-by: Matan Ziv-Av <matan@svgalib.org>
Link: https://lore.kernel.org/r/bd6922a412e50c2dcfb7ce24fc8687f577181d65.1629291912.git.matan@svgalib.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Dynamic BIOS SAR driver exposing dynamic SAR information from BIOS
The Dynamic SAR (Specific Absorption Rate) driver uses ACPI DSM
(Device Specific Method) to communicate with BIOS and retrieve
dynamic SAR information and change notifications. The driver uses
sysfs to expose this data to userspace via read and notify.
Sysfs interface is documented in detail under:
Documentation/ABI/testing/sysfs-driver-intc_sar
Signed-off-by: Shravan S <s.shravan@intel.com>
Link: https://lore.kernel.org/r/20210723211452.27995-2-s.shravan@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some devices may expose non-functioning entries that are reserved for
future use. These entries have zero size. Ignore them during probe.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210817224018.1013192-5-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This patch fixes the bug 212671.
Althrough the Fn lock (Fn + Esc) works on Legion 5 (R7000P), its LED
light does not change with the state. This modification sets the Fn lock
state to its current value on receiving the wmi event
8FC0DE0C-B4E4-43FD-B0F3-8871711C1294 to update the LED state.
Signed-off-by: Meng Dong <whenov@gmail.com>
Link: https://lore.kernel.org/r/20210817171203.12855-1-whenov@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Many Lenovo BIOS's support the ability to send a debug command which
is useful for debugging and testing unreleased or early features.
Adding support for this feature as a module parameter.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210817001501.293501-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Substate priority levels are encoded in 4 bits in the LPM_PRI register.
This value was used as an index to an array whose element size was less
than 16, leading to the possibility of overflow should we read a larger
than expected priority. In addition to the overflow, bad values could lead
to incorrect state reporting. So rework the priority code to prevent the
overflow and perform some validation of the register. Use the priority
register values if they give an ordering of unique numbers between 0 and
the maximum number of states. Otherwise, use a default ordering instead.
Reported-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210814014728.520856-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Moved drivers/platform/x86/intel_menlow.c to drivers/thermal/intel.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20210816035356.1955982-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Acer Predator Helios series (usually denoted by PHxxx-yy) features
a particular key above the keyboard named "TURBO".
The turbo key does 3 things:
1. Set all fan's speeds to TURBO mode
2. Overclocks the CPU and GPU in the safe range
3. Turn on an LED just below the turbo button
All the above actions are operating using WMI function calls,
and there is no custom OC level for turbo. It acts as a flag
for enabling turbo mode instead of telling processors to use
a specific multiply of power (e.g. 1.3x of power).
I've run some benchmark tests and it worked fine:
GpuTest 0.7.0
http://www.geeks3d.com
Module: FurMark
Normal mode Score: 7289 points (FPS: 121)
Turbo mode Score: 7675 points (FPS: 127)
Settings:
- 1920x1080 fullscreen
- antialiasing: Off
- duration: 60000 ms
Renderer:
- GeForce RTX 2060/PCIe/SSE2
- OpenGL: 4.6.0 NVIDIA 460.32.03
This feature is presented by Acer officially and should not harm
hardware in any case.
A challenging part of implementing this feature is that calling
overclock function requires knowing the exact count of fans
for CPU and GPU of each model, which to the best of my
knowledge is not available in the kernel.
So after checking the official PredatorSense application methods, it
turned out they have provided the software the list of fans in each model.
I have access to the mentioned list, and all similar PH-iii-jj can be
added easily by matching "DMI_PRODUCT_NAME".
Creating a specific file for the Acer gaming features is not possible
because the current in use WMI event GUID is required for the turbo button
and it's not possible to register multiple listeners on a single WMI event.
Signed-off-by: JafarAkhondali <jafar.akhoondali@gmail.com>
Link: https://lore.kernel.org/r/20210812125307.1749207-1-jafar.akhoondali@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
serdev provides a generic helper to get UART Serial Bus resources.
Use it instead of an open coded variant.
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210806111736.66591-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The X13 Flow laptops can utilise an external GPU. This requires
toggling an ACPI method which will first disable the internal
dGPU, and then enable the eGPU.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210807023656.25020-4-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In Windows the ASUS Armory Crate program can enable or disable the
dGPU via a WMI call. This functions much the same as various Linux
methods in software where the dGPU is removed from the device tree.
However the WMI call saves the state of dGPU (enabled or not) and
this then changes the dGPU visibility in Linux with no way for
Linux users to re-enable it. We expose the WMI method so users can
see and change the dGPU ACPI state.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210807023656.25020-3-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some ASUS ROG laptops have the ability to drive the display panel
a higher rate to eliminate or reduce ghosting.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210807023656.25020-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds platform support for the Cisco Meraki MX100 (Tinkerbell)
network appliance. This sets up the network LEDs and Reset
button.
Depends-on: ef0eea5b15 ("mfd: lpc_ich: Enable GPIO driver for DH89xxCC")
Co-developed-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210810004021.2538308-1-chrisrblake93@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The 'objs' is for user space tools, for the kernel modules
we should use 'y'.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210806154951.4564-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ACPI core in conjunction with platform driver core provides
an infrastructure to enumerate ACPI devices. Use it in order
to remove a lot of boilerplate code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Tested-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210803194039.35083-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The 'objs' is for user space tools, for the kernel modules
we should use 'y'.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210803192524.67031-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ACPI provides a generic helper to get I²C Serial Bus resources.
Use it instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210803163252.60141-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-18-bigeasy@linutronix.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
dell-smbios is depended on by dell-laptop and that has this same table +
some extra entries for chassis-type 30, 31 and 32.
Since dell-laptop will already auto-load based on the DMI table in there
(which also is more complete) and since dell-laptop will then bring in
the dell-smbios module, the only scenario I can think of where this DMI
table inside dell-smbios-smm.c is useful is if users have the dell-laptop
module disabled and they want to use the sysfs interface offered by
dell-smbios-smm.c. But that is such a corner case, even requiring a custom
kernel build, that it does not weigh up against having this duplicate
table, which as the current state already shows can only grow stale.
Users who do hit this corner-case can always explicitly modprobe /
insmod the module.
Cc: Mario Limonciello <mario.limonciello@outlook.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210802120734.36732-1-hdegoede@redhat.com
When numa is used to map CPU to PCI device, the optimized path to read
from cached data is not working and still calls _isst_if_get_pci_dev().
The reason is that when caching the mapping, numa information is not
available as it is read later. So move the assignment of
isst_cpu_info[cpu].numa_node before calling _isst_if_get_pci_dev().
Fixes: aa2ddd2425 ("platform/x86: ISST: Use numa node id for cpu pci dev mapping")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210727165052.427238-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The gpiod_lookup_table.table passed to gpiod_add_lookup_table() must
be terminated with an empty entry, add this.
Note we have likely been getting away with this not being present because
the GPIO lookup code first matches on the dev_id, causing most lookups to
skip checking the table and the lookups which do check the table will
find a matching entry before reaching the end. With that said, terminating
these tables properly still is obviously the correct thing to do.
Fixes: f8eb0235f6 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210806115515.12184-1-hdegoede@redhat.com
Move all Intel Platform Monitoring Technology drivers to
drivers/platform/x86/intel/pmt.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210727164928.3171521-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
360 degree hinges devices with dual KIOX010A + KIOX020A accelerometers
always have both a KIOX010A and a KIOX020A ACPI device (one for each
accel).
Theoretical some vendor may re-use some DSDT for a non-convertible
stripping out just the KIOX020A ACPI device from the DSDT. Check that
both ACPI devices are present to make the check more robust.
Fixes: 153cca9caa ("platform/x86: Add and use a dual_accel_detect() helper")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210802141000.978035-1-hdegoede@redhat.com
Various 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers
to allow the OS to determine the angle between the display and the base of
the device.
On Windows these are read by a special HingeAngleService process which
calls undocumented ACPI methods, to let the firmware know if the 2-in-1 is
in tablet- or laptop-mode. The firmware may use this to disable the kbd and
touchpad to avoid spurious input in tablet-mode as well as to report
SW_TABLET_MODE info to the OS.
Since Linux does not call these undocumented methods, the SW_TABLET_MODE
info reported by various pdx86 drivers is incorrect on these devices.
Before this commit the intel-hid and thinkpad_acpi code already had 2
hardcoded checks for ACPI hardware-ids of dual-accel sensors to avoid
reporting broken info.
And now we also have a bug-report about the same problem in the intel-vbtn
code. Since there are at least 3 different ACPI hardware-ids in play, add
a new dual_accel_detect() helper which checks for all 3, rather then
adding different hardware-ids to the drivers as bug-reports trickle in.
Having shared code which checks all known hardware-ids is esp. important
for the intel-hid and intel-vbtn drivers as these are generic drivers
which are used on a lot of devices.
The BOSC0200 hardware-id requires special handling, because often it is
used for a single-accelerometer setup. Only in a few cases it refers to
a dual-accel setup, in which case there will be 2 I2cSerialBus resources
in the device's resource-list, so the helper checks for this.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209011
Reported-and-tested-by: Julius Lehmann <julius@devpi.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210729082134.6683-1-hdegoede@redhat.com
Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Link: https://lore.kernel.org/r/20210518140758.29318-1-pdk@semihalf.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Add trace event to report samples and their timestamp coming from the
EC. It allows to check if the timestamps are correct and the filter is
working correctly without introducing too much latency.
To enable these events:
cd /sys/kernel/debug/tracing/
echo 1 > events/cros_ec/enable
echo 0 > events/cros_ec/cros_ec_request_start/enable
echo 0 > events/cros_ec/cros_ec_request_done/enable
echo 1 > tracing_on
cat trace_pipe
Observe event flowing:
irq/105-chromeo-95 [000] .... 613.659758: cros_ec_sensorhub_timestamp: ...
irq/105-chromeo-95 [000] .... 613.665219: cros_ec_sensorhub_filter: dx: ...
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix 2 possible memleaks on error-exits from tlmi_analyze():
1. If the kzalloc of pwd_power fails, then not only free the atributes,
but also the allocated pwd_admin struct.
2. Freeing the attributes should also free the possible_values strings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210717143607.3580-3-hdegoede@redhat.com
