Add an architecture independent wrapper function for the KVM_IRQ_LINE
ioctl.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-5-ricarkol@google.com
Add a generic library function for reading and writing GICv3 distributor
and redistributor registers. Then adapt some functions to use it; more
will come and use it in the next commit.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-3-ricarkol@google.com
Move gic_v3.h to the shared headers location. There are some definitions
that will be used in the vgic-irq test.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-2-ricarkol@google.com
The 16kB page size is not a popular choice, due to only a few CPUs
actually implementing support for it. However, it can lead to some
interesting performance improvements given the right uarch choices.
Add support for this page size for various PA/VA combinations.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-7-maz@kernel.org
Some of the arm64 systems out there have an IPA space that is
positively tiny. Nonetheless, they make great KVM hosts.
Add support for 36bit IPA support with 4kB pages, which makes
some of the fruity machines happy. Whilst we're at it, add support
for 64kB pages as well, though these boxes have no support for it.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211227124809.1335409-6-maz@kernel.org
The current way we initialise TCR_EL1 is a bit cumbersome, as
we mix setting TG0 and IPS in the same swtch statement.
Split it into two statements (one for the base granule size, and
another for the IPA size), allowing new modes to be added in a
more elegant way.
No functional change intended.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-5-maz@kernel.org
Just as arm64 implemenations don't necessary support all IPA
ranges, they don't all support the same page sizes either. Fun.
Create a dummy VM to snapshot the page sizes supported by the
host, and filter the supported modes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-4-maz@kernel.org
Contrary to popular belief, there is no such thing as a default
IPA size on arm64. Anything goes, and implementations are the
usual Wild West.
The selftest infrastructure default to 40bit IPA, which obviously
doesn't work for some systems out there.
Turn VM_MODE_DEFAULT from a constant into a variable, and let
guest_modes_append_default() populate it, depending on what
the HW can do. In order to preserve the current behaviour, we
still pick 40bits IPA as the default if it is available, and
the largest supported IPA space otherwise.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-3-maz@kernel.org
As we are going to add support for a variable default mode on arm64,
let's make sure it is setup first by using a constructor that gets
called before the actual test runs.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-2-maz@kernel.org
Introduce a user space tool to make use of the interface exposed by
Platform Firmware Runtime Update and Telemetry drivers.
It can be used for firmware code injection, driver updates and
to retrieve platform firmware telemetry data.
Tested-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tmon fix and int340x driver improvement for 5.17-rc1.
* thermal-tools:
thermal: tools: tmon: remove unneeded local variable
* thermal-int340x:
thermal: int340x: Use struct_group() for memcpy() region
NFT_COUNTER was removed since
390ad4295aa ("netfilter: nf_tables: make counter support built-in")
LKP/0Day will check if all configs listing under selftests are able to
be enabled properly.
For the missing configs, it will report something like:
LKP WARN miss config CONFIG_NFT_COUNTER= of net/mptcp/config
- it's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ma Xinjian <xinjianx.ma@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enumerations should return a value between 0 and items-1, check that this
is the case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211217130213.3893415-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To simplify the code a bit and allow future reuse factor the checks that
values we read are valid out of test_ctl_get_value() into a separate
function which can be reused later. As part of this extend the test to
check all the values for the control, not just the first one.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211217130213.3893415-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a test of sigreturning to an unaligned address (low two bits set).
This should have no effect because the hardware will mask those bits.
However it previously falsely triggered a warning when
CONFIG_PPC_RFI_SRR_DEBUG=y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221135101.2085547-3-mpe@ellerman.id.au
This release adds following change:
- Update max performance when BIOS disabled turbo
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When BIOS disables turbo, the cpuinfo_max_freq will also be same as the
power up base frequency. When SST-PP causes increase in base frequency
the performance will be still limited to the old base frequency as the
cpuinfo_max_freq will not be updated.
In this case we need to update scaling_max frequency to the new
base_frequency. This will result in setting updated max performance
limit in the Pstate driver. So performance will not be limited to the
old base frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.
With this change the regression test started failing. Update
the tests to match this new behavior.
Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.
Fixes: 158390e456 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding btf_dump__new call to test_cpp, so we can
test C++ compilation with that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211223131736.483956-2-jolsa@kernel.org
Change the case that sends packets with "too short inner packet" to
include part of ethernet header, to make the trap to be triggered due to
the correct reason.
According to ASIC arch, the trap is triggered if overlay packet length is
less than 18B, and the minimum inner packet should include source MAC and
destination MAC.
Till now the case passed because one of the reserved bits in VxLAN
header was used. This issue was found while adding an equivalent test
for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test configures VxLAN with IPv6 underlay and verifies that the
expected traps are triggered under the right conditions.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-2 and above, which support up to four
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-1 switches, which support up to five
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to verify FDB vetos of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan_fdb_veto.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to verify configuration of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Add separated test cases for learning which is not supported for IPv6
and for UDP checksum flags which are different from IPv4 flags.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Rename some functions to include "ipv4", so the next patch will add
equivalent functions for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to check Q-in-VNI traffic with IPv6 underlay and overlay.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a similar fashion to the asymmetric test, add a test for symmetric
routing. In symmetric routing both the ingress and egress VTEPs perform
routing in the overlay network into / from the VxLAN tunnel. Packets in
different directions use the same VNI - the L3 VNI.
Different tenants (VRFs) use different L3 VNIs.
Add a test which is similar to the existing IPv4 test to check IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In asymmetric routing the ingress VTEP routes the packet into the
correct VxLAN tunnel, whereas the egress VTEP only bridges the packet to
the correct host. Therefore, packets in different directions use
different VNIs - the target VNI.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test uses a simple topology with two VTEPs and two VNIs and verifies
that ping passes between hosts (local / remote) in the same VLAN (VNI)
and in different VLANs belonging to the same tenant (VRF).
While the test does not check VM mobility, it does configure an anycast
gateway using a macvlan device on both VTEPs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove `vxlan_ping_test()` which is not used and probably was copied
mistakenly from vxlan_bridge_1d.sh.
This was found while adding an equivalent test for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tests are very similar to their VLAN-unaware counterpart
(vxlan_bridge_1d_ipv6.sh and vxlan_bridge_1d_port_8472_ipv6.sh),
but instead of using multiple VLAN-unaware bridges, a single VLAN-aware
bridge is used with multiple VLANs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests similar to vxlan_bridge_1d.sh and vxlan_bridge_1d_port_8472.sh.
The tests set up a topology with three VxLAN endpoints: one
"local", possibly offloaded, and two "remote", formed using veth pairs
and likely purely software bridges. The "local" endpoint is connected to
host systems by a VLAN-unaware bridge.
Since VxLAN tunnels must be unique per namespace, each of the "remote"
endpoints is in its own namespace. H3 forms the bridge between the three
domains.
Send IPv4 packets and IPv6 packets with IPv6 underlay.
Use `TC_FLAG`, which is defined in `forwarding.config` file, for TC
checks. `TC_FLAG` allows testing that on HW datapath, the traffic
actually goes through HW.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently `ping_do()` and `ping6_do()` send 10 packets.
There are cases that it is not possible to catch only the interesting
packets using tc rule, so then, it is possible to send many packets and
verify that at least this amount of packets hit the rule.
Add `PING_COUNT` variable, which is set to 10 by default, to allow tests
sending more than 10 packets using the existing ping API.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If destination port is above 32k and source port below 16k
assume this might cause 'port shadowing' where a 'new' inbound
connection matches an existing one, e.g.
inbound X:41234 -> Y:53 matches existing conntrack entry
Z:53 -> X:4123, where Z got natted to X.
In this case, new packet is natted to Z:53 which is likely
unwanted.
We avoid the rewrite for connections that originate from local host:
port-shadowing is only possible with forwarded connections.
Also adjust test case.
v3: no need to call tuple_force_port_remap if already in random mode (Phil)
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new macros for mem_hops field which can be used to represent
remote-node, socket and board level details.
Currently the code had macro for HOPS_0 which, corresponds to data
coming from another core but same node. Add new macros for HOPS_1 to
HOPS_3 to represent remote-node, socket and board level data.
Also add corresponding strings in the mem_hops array to represent
mem_hop field data in perf_mem__lvl_scnprintf function
Incase mem_hops field is used, PERF_MEM_LVLNUM field also need to be set
inorder to represent the data source. Hence printing data source via
PERF_MEM_LVL field can be skip in that scenario.
For ex: Encodings for mem_hops fields with L2 cache:
L2 - local L2
L2 | REMOTE | HOPS_0 - remote core, same node L2
L2 | REMOTE | HOPS_1 - remote node, same socket L2
L2 | REMOTE | HOPS_2 - remote socket, same board L2
L2 | REMOTE | HOPS_3 - remote board L2
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20211206091749.87585-3-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
-----BEGIN PGP SIGNATURE-----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=xXvq
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 5.17
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
* tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (103 commits)
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
iio:addac:ad74413r: Fix uninitialized ret in a path that won't be hit.
MAINTAINERS: Add maintainer for xilinx-ams
dt-bindings: iio: adc: Add Xilinx AMS binding documentation
iio: adc: Add Xilinx AMS driver
device property: Add fwnode_iomap()
iio:accel:kxcjk-1013: Mark struct __maybe_unused to avoid warning.
iio:accel:bmc150: Mark structure __maybe_unused as only needed with for pm ops.
iio:dummy: Drop set but unused variable len.
iio:magn:ak8975: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_mpu6050: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion.
iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion.
iio:amplifiers:hmc425a: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ti-ads1015: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ina2xx-adc: Suppress clang W=1 warning about pointer to enum conversion.
iio:accel:bma180: Suppress clang W=1 warning about pointer to enum conversion.
drivers:iio:dac: Add AD3552R driver support
dt-bindings: iio: dac: Add adi,ad3552r.yaml
...
The output of bpftool prog tracelog is currently buffered, which is
inconvenient when piping the output into other commands. A simple
tracelog | grep will typically not display anything. This patch fixes it
by enabling line buffering on stdout for the whole bpftool binary.
Fixes: 30da46b5dc ("tools: bpftool: add a command to dump the trace pipe")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211220214528.GA11706@Mem
When unwinding using frame pointers on ARM64, the return address of the
current function may not have been pushed into the stack when a function
was interrupted, which makes perf show an incorrect call graph to the
user.
Consider the following example program:
void leaf() {
/* long computation */
}
void parent() {
// (1)
leaf();
// (2)
}
... could be compiled into (using gcc -fno-inline -fno-omit-frame-pointer):
leaf:
/* long computation */
nop
ret
parent:
// (1)
stp x29, x30, [sp, -16]!
mov x29, sp
bl parent
nop
ldp x29, x30, [sp], 16
// (2)
ret
If the program is interrupted at (1), (2), or any point in "leaf:", the
call graph will skip the callers of the current function. We can unwind
using the dwarf info and check if the return addr is the same as the LR
register, and inject the missing frame into the call graph.
Before this patch, the above example shows the following call-graph when
recording using "--call-graph fp" mode in ARM64:
# Children Self Command Shared Object Symbol
# ........ ........ ........ ................ ......................
#
99.86% 99.86% program3 program3 [.] leaf
|
---_start
__libc_start_main
main
leaf
As can be seen, the "parent" function is missing. This is specially
problematic in "leaf" because for leaf functions the compiler may always
omit pushing the return addr into the stack. After this patch, it shows
the correct graph:
# Children Self Command Shared Object Symbol
# ........ ........ ........ ................ ......................
#
99.86% 99.86% program3 program3 [.] leaf
|
---_start
__libc_start_main
main
parent
leaf
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-7-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
[ Rename machine__normalize_is() to machine__normalized_is(), as suggested by James Clark ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor the SAMPL_REG macro so that it can be used in a followup commit
to obtain the masks for ARM64 registers.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-6-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable dwarf_callchain_users on arm64 which will be needed to do a
DWARF unwind in order to get the caller of the leaf frame.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-5-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactoring script__setup_sample_type() by using callchain_param_setup()
to replace the duplicate code for callchain parameter setting up.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-4-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a mechanism for platforms to inject stack frames for the leaf
frame caller if there is enough information to determine a frame
is missing from dwarf or other post processing mechanisms.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-3-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ARM64, automatically record the link register if the frame pointer
mode is on. It will be used to do a dwarf unwind to find the caller of
the leaf frame if the frame pointer was omitted.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-2-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is in preparation for adding more tests that will need the test
number to be 3 digts so they align nicely in the output.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20211215160403.69264-3-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* Fix for kvm_run->if_flag on SEV-ES
* Fix for page table use-after-free if yielding during exit_mm()
* Improve behavior when userspace starts a nested guest with invalid state
* Fix missed wakeup with assigned devices but no VT-d posted interrupts
* Do not tell userspace to save/restore an unsupported PMU MSR
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHCGbIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNMSwf+PpOl69xqQCHzLpDtA9MTBZZi5uKc
eZqMtQ7D+T7XYbtMiHBI9zofcbtHlQVC9Na74j8J7bCuvqe8UGS/z93RoZZQ+/dg
seEbQNEgcNlPD1G3JzaipcGhRqQl6j5G9LjuixyFpkS2O27YsRTpb1HJag31uSFV
Xd7Ih0R2YnKCNJqJov324KHpDM3c4FZL8HdCS/gG94qyLHPA2dJ8fOTwCcAK4LP6
tl9XW5InXMVcck9ssDKFpAfipMNNPNPeAHMONbIm6hyG5HkVjcS3JT1bZmkauxky
VIegPlAmorRCig5Hj2QfWEIOfvTUPdmm7WWh+SSZamY6cyvolWs1hV86Bg==
=333O
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Fix for compilation of selftests on non-x86 architectures
- Fix for kvm_run->if_flag on SEV-ES
- Fix for page table use-after-free if yielding during exit_mm()
- Improve behavior when userspace starts a nested guest with invalid
state
- Fix missed wakeup with assigned devices but no VT-d posted interrupts
- Do not tell userspace to save/restore an unsupported PMU MSR
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU
KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state
KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state
KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required
KVM: VMX: Always clear vmx->fail on emulation_required
selftests: KVM: Fix non-x86 compiling
KVM: x86: Always set kvm_run->if_flag
KVM: x86/mmu: Don't advance iterator after restart due to yielding
KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
We have a general signal fuzzer, sigfuz, which can modify the MSR & NIP
before sigreturn. But the chance of it hitting a kernel address and also
clearing MSR_PR is fairly slim.
So add a specific test of sigreturn to a kernel address, both with and
without attempting to clear MSR_PR (which the kernel must block).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211209115944.4062384-1-mpe@ellerman.id.au
