The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "bindings" in various forms (also with trailing full
stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.
Drop trailing "Devicetree bindings" in various forms (also with
trailing full stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Link: https://lore.kernel.org/r/20221216163815.522628-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The GPMC controller has the ability to configure the polarity for the
wait pin. The current properties do not allow this configuration.
This binding directly configures the WAITPIN<X>POLARITY bit
in the GPMC_CONFIG register by setting the "ti,wait-pin-polarity"
dt-property.
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20221102133047.1654449-3-benedikt.niedermayr@siemens.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add support for the Arm PL354 static memory controller to the existing
Arm PL353 binding. Both are different configurations of the same IP with
support for different types of memory interfaces.
The 'arm,pl354' binding has already been in use upstream for a long time
in Arm development boards. The existing users have only the controller
without any child devices, so drop the required address properties
(ranges, #address-cells, #size-cells). The schema for 'ranges' is too
constrained as the order is not important and the PL354 has 8
chipselects (And the PL353 actually has up to 8 too).
The clocks aren't really correct in either case. There's 1 bus clock and
then a clock for each of the 2 memory interfaces.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221021203928.286169-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Split st,stm32-fmc2-ebi.yaml specific properties into
st,stm32-fmc2-ebi-props.yaml, split memory-controller bus peripheral
properties into mc-peripheral-props.yaml, reference the
st,stm32-fmc2-ebi-props.yaml in mc-peripheral-props.yaml and reference
the mc-peripheral-props.yaml in micrel,ks8851.yaml.
This way, the FMC2 controller properties in Micrel KSZ8851MLL ethernet
controller node can be properly validated.
Fixes the following warning:
arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dtb: ethernet@1,0:
Unevaluated properties are not allowed ('bank-width', 'st,fmc2-ebi-cs-mux-enable', ... 'st,fmc2-ebi-cs-write-data-hold-ns' were unexpected)
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220928181944.194808-1-marex@denx.de
[krzk: trim warning message]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This patch adds a new device tree binding for an LPDDR channel to serve
as a top-level organizing node for LPDDR part nodes nested below it. An
LPDDR channel needs to have an "io-width" property to describe its width
(this is important because this width does not always match the io-width
of the part number, indicating that multiple parts are wired in parallel
on the same channel), as well as one or more nested "rank@X" nodes.
Those represent information about the individual ranks of each LPDDR
part connected on that channel and should match the existing
"jedec,lpddrX" bindings for individual LPDDR parts.
New platforms should be using this node -- the existing practice of
providing a raw, toplevel "jedec,lpddrX" node without indication of how
many identical parts are in the system should be considered deprecated.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220930220606.303395-4-jwerner@chromium.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This patch adds bindings for LPDDR4 and LPDDR5 memory analogous to the
existing bindings for LPDDR2 and LPDDR3. For now, the new types are only
needed for topology description, so other properties like timing
parameters are omitted. They can be added later if needed.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220930220606.303395-3-jwerner@chromium.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This patch allows a new kind of compatible string for LPDDR parts in the
device tree bindings, in addition to the existing hardcoded
<vendor>,<part-number> strings. The new format contains manufacturer and
part (revision) information in numerical form, such as lpddr3-ff,0201
for an LPDDR3 part with manufacturer ID ff and revision ID 0201. This
helps cases where LPDDR parts are probed at runtime by boot firmware and
cannot be matched to hardcoded part numbers, such as the firmware on the
qcom/sc7280-herobrine boards does (which supports 4 different memory
configurations at the moment, and more are expected to be added later at
a point where the boot firmware can no longer be updated to specifically
accommodate them).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220930220606.303395-2-jwerner@chromium.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The bindings for different LPDDR versions mostly use the same kinds of
properties, so in order to reduce duplication when we're adding support
for more versions, this patch creates a new lpddr-props subschema that
can be referenced by the others to define these common parts. (This will
consider a few smaller I/O width and density numbers "legal" for LPDDR3
that are usually not used there, but this should be harmless.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220930220606.303395-1-jwerner@chromium.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Document support for the SPI Multi I/O Bus Controller (RPC-IF) in the
R-Car V4H SoC.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/c268cb4497cbe79773bb6568f36c37adc6fb5bbe.1665582645.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The property st,fmc2_ebi-cs-write-address-setup-ns should really be
st,fmc2-ebi-cs-write-address-setup-ns (there is underscore _ between
fmc2 and ebi and there should be a dash - instead). This is a remnant
from conversion of old non-upstream bindings. Fix it.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926222003.527171-1-marex@denx.de
DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for
compatible strings used in kernel sources against compatible strings
in DT schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems
-----BEGIN PGP SIGNATURE-----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=IDIz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----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=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
Improvements in Synopsys DesignWare Universal Multi-Protocol Memory
Controller Devicetree bindings. The bindings are being split into
one related to Synopsys core and into quite different derivative Zynq
A05 DDR Memory Controller. Extend the Synopsys bindings with additional
properties to match upcoming new device support (Baikal-T1 support).
-----BEGIN PGP SIGNATURE-----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=SQZl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1MoR
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v6.1, part 2
Improvements in Synopsys DesignWare Universal Multi-Protocol Memory
Controller Devicetree bindings. The bindings are being split into
one related to Synopsys core and into quite different derivative Zynq
A05 DDR Memory Controller. Extend the Synopsys bindings with additional
properties to match upcoming new device support (Baikal-T1 support).
* tag 'memory-controller-drv-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
Link: https://lore.kernel.org/r/20220926105023.119781-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The syscon string was introduced because the mt7621 clock driver needs to
read some registers creating a regmap from the syscon. The bindings were
added before the clock driver was properly mainlined and at first the clock
driver was using ralink architecture dependent operations rt_memc_* defined
in 'arch/mips/include/asm/mach-ralink/ralink_regs.h'.
This string is already there on the memory controller node on mt7621.dtsi.
Add syscon as a constant string on the compatible property, now that memc
became a syscon. Update the example accordingly.
Fixes: 5278e4a181 ("dt-bindings: memory: add binding for Mediatek's MT7621 SDRAM memory controller")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
First of all the DW uMCTL2 DDRC IP-core supports the individual IRQ lines
for each standard event: ECC Corrected Error, ECC Uncorrected Error, ECC
Address Protection, Scrubber-Done signal, DFI Parity/CRC Error. It's
possible that the platform engineers merge them up in the IRQ controller
level. So let's add both configuration support to the DT-schema.
Secondly the DW uMCTL2 DDRC IP-core can have clock sources like APB
reference clock, AXI-ports clock, main DDRC core reference clock and
Scrubber low-power clock. In addition to that each clock domain can have a
dedicated reset signal. Let's add the properties for at least the denoted
clock sources and the corresponding reset controls.
Note the IRQs and the phandles order is deliberately not fixed since some
of the sources may be absent depending on the IP-core synthesize
parameters and the particular platform setups.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910195659.11843-3-Sergey.Semin@baikalelectronics.ru
Xilinx ZynqMP DDRC-based example contains the opencoded numerical literals
in the IRQ lines definition. It doesn't seem justified since the
corresponding platform has well defined ARM GIC interface. Let's replace
the numbers with the corresponding macros then.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910195659.11843-2-Sergey.Semin@baikalelectronics.ru
The DT-schema name and the corresponding generic compatible string look
inappropriate in the current DW uMCTL2 DDRC DT-bindings:
1. DT-schema name contains undefined vendor-prefix. It's supposed to be
"snps", not "synopsys".
2. DT-schema name has "ecc" suffix. That is a device property, and has
nothing to do with the controller actual name.
3. The controller name is different. It's DW uMCTL2 DDRC. Just DDRC
doesn't identify the IP-core in subject.
4. There is no much point in using the IP-core version in the device name
since it can be retrieved from the corresponding device CSR. Moreover the
DW uMCTL2 DDRC driver doesn't differentiate the IP-core version at the
current state.
In order to fix all the inconsistencies described above we suggest to
rename the DT-schema to "snps,dw-umctl2-ddrc.yaml", deprecate the
compatible string "snps,ddrc-3.80a" and define a new generic device
name as "snps,dw-umctl2-ddrc".
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910194237.10142-16-Sergey.Semin@baikalelectronics.ru
The Zynq A05 DDRC controller has nothing in common with DW uMCTL2 DDRC:
the CSRs layout is absolutely different and it doesn't support IRQs unlike
DW uMCTL2 DDR controller of all versions (v1.x, v2.x and v3.x). Thus there
is no any reason to have these controllers described in the same bindings.
Let's split the DT-schema up.
Note since the synopsys,ddrc-ecc.yaml schema describes the Synopsys DW
uMCTL2 DDR controller only, we need to accordingly fix the device
descriptions.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910194237.10142-15-Sergey.Semin@baikalelectronics.ru
Add mt8188 smi supporting in the bindings.
In mt8188, there are two smi-common HW, one is for vdo(video output),
the other is for vpp(video processing pipe). They connect with different
smi-larbs, then some setting(bus_sel) is different. Differentiate them
with the compatible string.
Something like this:
IOMMU(VDO) IOMMU(VPP)
| |
SMI_COMMON_VDO SMI_COMMON_VPP
---------------- ----------------
| | ... | | ...
larb0 larb2 ... larb1 larb3 ...
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220817124608.10062-2-chengci.xu@mediatek.com
Simple 'opp-table:true' accepts a boolean property as opp-table, so
restrict it to object to properly enferce real OPP table nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220818061549.9087-1-krzysztof.kozlowski@linaro.org
Document the Broadcom STB memory controller which is a trivial binding
for now with a set of compatible strings and single register.
Since we introduce this binding, the section in
Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt is removed
and this binding is referenced instead.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[krzk: correct path in brcm,brcmstb.txt]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812222533.2428033-2-f.fainelli@gmail.com
The max clock items for the dts node with compatible
'mediatek,mt8195-smi-sub-common' should be 3.
However, the dtbs_check of such node will get following message,
arch/arm64/boot/dts/mediatek/mt8195-evb.dtb: smi@14010000: clock-names: ['apb', 'smi', 'gals0'] is too long
From schema: Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
It's because the 'mediatek,mt8195-smi-sub-common' compatible incorrectly
matches the 'else' conditions for gen2 HW without gals.
Rewrite the 'else' condition to specifically identify the compatibles
that utilizing gen2 HW without gals.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220729063208.16799-3-tinghan.shen@mediatek.com
This series should rid us of dtbs_check errors for the RISC-V Canaan
k210 based boards. To make keeping it that way a little easier, I
changed the Canaan devicetree Makefile so that it would build all of the
devicetrees in the directory if SOC_CANAAN.
Link: https://lore.kernel.org/all/mhng-85044754-c361-40bc-a6a2-7082f35930bb@palmer-ri-x1c9/
* remotes/palmer/riscv-canaan_dt_schema:
riscv: dts: canaan: build all devicetress if SOC_CANAAN
riscv: dts: canaan: add specific compatible for kd233's LCD
riscv: dts: canaan: fix bus {ranges,reg} warnings
riscv: dts: canaan: remove spi-max-frequency from controllers
riscv: dts: canaan: use custom compatible for k210 i2s
riscv: dts: canaan: fix kd233 display spi frequency
riscv: dts: canaan: fix mmc node names
riscv: dts: canaan: fix the k210's timer nodes
riscv: dts: canaan: fix the k210's memory node
dt-bindings: memory-controllers: add canaan k210 sram controller
dt-bindings: display: ili9341: document canaan kd233's lcd
dt-bindings: display: convert ilitek,ili9341.txt to dt-schema
The k210 U-Boot port has been using the clocks defined in the
devicetree to bring up the board's SRAM, but this violates the
dt-schema. As such, move the clocks to a dedicated node with
the same compatible string & document it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220705215213.1802496-5-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Another round from new cases in 5.19-rc of removing redundant
minItems/maxItems when 'items' list is specified. This time it is in
if/then schemas as the meta-schema was failing to check this case.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220606225137.1536010-1-robh@kernel.org
Add SMI bindings for the MediaTek Helio X10 (MT6795) SoC
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220518091038.22380-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Binding schemas which define child node properties such as memory
controllers with timing properties need a separate schema which can be
referenced from child device schemas. This is necessary for
unevaluatedProperties checks to work properly.
Move the ingenic,nemc child properties to its own file and reference
from ingenic,nand.yaml which describes a child NAND controller.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220525210140.2489866-1-robh@kernel.org
The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture we
supported that has no MMU implementation, but there are still a few
architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
and without an MMU.
- A series to add a generic ticket spinlock that can be shared by most
architectures with a working cmpxchg or ll/sc type atomic, including
the conversion of riscv, csky and openrisc. This series is also a
prerequisite for the loongarch64 architecture port that will come as
a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers.
-----BEGIN PGP SIGNATURE-----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=ri2Q
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
There are 40 branches this time, adding a lot of new hardware
support, and cleanups. Krzysztof Kozlowski continues his treewide
cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L
general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for designing
custom SoCs, the support for now is for the Fixed Virtual Platform
emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used
in upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly
for 32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based
IOT board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch,
a Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568
-----BEGIN PGP SIGNATURE-----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=LsM7
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
the code considerably this way
- Rip out the silly edac_align_ptr() contraption which was computing the
size of the private structures of each driver and thus allowing for a
one-shot memory allocation. This was clearly unnecessary and confusing
so switch to simple and boring kmalloc* calls.
- Last but not least, the usual garden variety of fixes, cleanups and
improvements all over EDAC land
-----BEGIN PGP SIGNATURE-----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=Hwmn
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Switch ghes_edac to use the CPER error reporting routines and
simplify the code considerably this way
- Rip out the silly edac_align_ptr() contraption which was computing
the size of the private structures of each driver and thus allowing
for a one-shot memory allocation. This was clearly unnecessary and
confusing so switch to simple and boring kmalloc* calls.
- Last but not least, the usual garden variety of fixes, cleanups and
improvements all over EDAC land
* tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix typo processsors -> processors
EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id()
EDAC: Use kcalloc()
EDAC/ghes: Change ghes_hw from global to static
EDAC/armada_xp: Use devm_platform_ioremap_resource()
EDAC/synopsys: Add a SPDX identifier
EDAC/synopsys: Add driver support for i.MX platforms
EDAC/dmc520: Don't print an error for each unconfigured interrupt line
EDAC/mc: Get rid of edac_align_ptr()
EDAC/device: Sanitize edac_device_alloc_ctl_info() definition
EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info()
EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info()
EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc()
efi/cper: Reformat CPER memory error location to more readable
EDAC/ghes: Unify CPER memory error location reporting
efi/cper: Add a cper_mem_err_status_str() to decode error description
powerpc/85xx: Remove fsl,85... bindings
Detailed description for this pull request:
1. Update devfreq core
- Add cpu based scaling support to passive governor. Some device like
cache might require the dynamic frequency scaling. But, it has very
tightly to cpu frequency. So that use passive governor to scale
the frequency according to current cpu frequency.
To decide the frequency of the device, the governor does one of the following:
: Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
: Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
2. Update devfreq driver
- Update rk3399_dmc.c as following:
: Convert dt-binding document to YAML and deprecate unused properties.
: Use Hz units for the device-tree properties of rk3399_dmc.
: rk3399_dmc is able to set the idle time before changing the dmc clock.
Specify idle time parameters by using nano-second unit on dt bidning.
: Add new disable-freq properties to optimize the power-saving feature
of rk3399_dmc.
: Disable devfreq-event device on remove() to fix unbalanced
enable-disable count.
: Use devm_pm_opp_of_add_table()
: Block PMU (Power-Management Unit) transitions when scaling frequency
by ARM Trust Firmware in order to fix the conflict between PMU and DMC
(Dynamic Memory Controller).
-----BEGIN PGP SIGNATURE-----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=/3W8
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq changes for 5.19-rc1 from Chanwoo Choi:
"1. Update devfreq core
- Add cpu based scaling support to passive governor. Some device like
cache might require the dynamic frequency scaling. But, it has very
tightly to cpu frequency. So that use passive governor to scale
the frequency according to current cpu frequency.
To decide the frequency of the device, the governor does one of the following:
: Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
: Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
2. Update devfreq drivers
- Update rk3399_dmc.c as following:
: Convert dt-binding document to YAML and deprecate unused properties.
: Use Hz units for the device-tree properties of rk3399_dmc.
: rk3399_dmc is able to set the idle time before changing the dmc clock.
Specify idle time parameters by using nano-second unit on dt bidning.
: Add new disable-freq properties to optimize the power-saving feature
of rk3399_dmc.
: Disable devfreq-event device on remove() to fix unbalanced
enable-disable count.
: Use devm_pm_opp_of_add_table()
: Block PMU (Power-Management Unit) transitions when scaling frequency
by ARM Trust Firmware in order to fix the conflict between PMU and DMC
(Dynamic Memory Controller)."
* tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: passive: Keep cpufreq_policy for possible cpus
PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
PM / devfreq: Add cpu based scaling support to passive governor
PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
PM / devfreq: rk3399_dmc: Block PMU during transitions
soc: rockchip: power-domain: Manage resource conflicts with firmware
PM / devfreq: rk3399_dmc: Avoid static (reused) profile
PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table()
PM / devfreq: rk3399_dmc: Disable edev on remove()
PM / devfreq: rk3399_dmc: Support new *-ns properties
PM / devfreq: rk3399_dmc: Support new disable-freq properties
PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD
PM / devfreq: rk3399_dmc: Drop excess timing properties
PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props
dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties
dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds
dt-bindings: devfreq: rk3399_dmc: Fix Hz units
dt-bindings: devfreq: rk3399_dmc: Deprecate unused/redundant properties
dt-bindings: devfreq: rk3399_dmc: Convert to YAML
Updates the memory controller bindings to properly validate the number
of entries in the reg and reg-names properties.
-----BEGIN PGP SIGNATURE-----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=zZKk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=E9U4
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.19-rc1
Updates the memory controller bindings to properly validate the number
of entries in the reg and reg-names properties.
* tag 'tegra-for-5.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: tegra: Update validation for reg and reg-names
Link: https://lore.kernel.org/r/20220506143005.3916655-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document RZ/G2UL RPC-IF bindings. RZ/G2UL RPC-IF is identical to one found
on the RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-rpc-if" will be used as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220501082508.25511-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
From Tegra186 onwards, memory controller support multiple channels.
"reg" items are updated with address and size of these channels.
Tegra186 has overall 5 memory controller channels. Tegra194 and Tegra234
have overall 17 memory controller channels each.
There is one "reg" entry for memory controller stream-ID registers. So
update the "reg" property's "minItems" and "maxItems" accordingly in the
Tegra186 devicetree documentation.
Also update validation for "reg-names" added for these corresponding
"reg" items. ABI change due to new bindings is intended but backward
compatibility is preserved in driver.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
DDR DVFS tuning has found that several power-saving features don't have
good tradeoffs at higher frequencies -- at higher frequencies, we'll see
glitches or other errors. Provide tuning controls so these can be
disabled at higher OPPs, and left active only at the lower ones.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
It's inefficient to use the same number of cycles for all OPPs, since
lower frequencies make for longer idle times. Let's specify the idle
time instead, so software can pick the optimal number of cycles on its
own.
NB: these bindings aren't used anywhere yet.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The driver and all downstream device trees [1] are using Hz units, but
the document claims MHz. DRAM frequency for these systems can't possibly
exceed 2^32-1 Hz, so the choice of unit doesn't really matter than much.
Rather than add unnecessary risk in getting the units wrong, let's just
go with the unofficial convention and make the docs match reality.
A sub-1MHz frequency is extremely unlikely, so include a minimum in the
schema, to help catch anybody who might have believed this was MHz.
[1] And notably, also those trying to upstream them:
https://lore.kernel.org/lkml/20210308233858.24741-3-daniel.lezcano@linaro.org/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
These DRAM configuration properties are all handled in ARM Trusted
Firmware (and have been since the early days of this SoC), and there are
no in-tree users of the DMC binding yet. It's better to just defer to
firmware instead of maintaining this large list of properties.
There's also some confusion about units: many of these are specified in
MHz, but the downstream users and driver code are treating them as Hz, I
believe. Rather than straighten all that out, I just drop them.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
I want to add, deprecate, and bugfix some properties, as well as add the
first users. This is easier with a proper schema.
The transformation is mostly straightforward, plus a few notable tweaks:
* Renamed rockchip,dram_speed_bin to rockchip,ddr3_speed_bin. The
driver code and the example matched, but the description was
different. I went with the implementation. Note that this property is
also slated for deprecation/deletion in the subsequent patches.
* Drop upthreshold and downdifferential properties from the example.
These were undocumented (so, wouldn't pass validation), but were
representing software properties (governor tweaks). I drop them from
the driver in subsequent patches.
* Rename clock from pclk_ddr_mon to dmc_clk. The driver, DT example,
and all downstream users matched -- the binding definition was the
exception. Anyway, "dmc_clk" is a more appropriately generic name.
* Choose a better filename and location (this is a memory controller).
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Document support for the SPI Multi I/O Bus Controller (RPC-IF) in the
R-Car H3, M3-W, M3-W+, M3-N, and E3 SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/3784b6cb76a008fb56d6cb4ba228d78c77e710fa.1648546583.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
