Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
For SubVP scaling cases, we must include the scaling
info as part of the cmd. This is required when converting
OTG line to HUBP line for the MALL_START_LINE programming.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
this is to ensure that driver will not reprogram hvm_prefetch_req again if
it is done.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Use pitch when calculating size to cache in MALL
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Don't set DSC bit for phantom pipes, not
required since phantom pipe don't have
any actual output
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Depending on how the clock table is constructed from PMFW we can run
into issues where we don't think we have enough bandwidth available
due to FCLK too low - eg. when the FCLK table contains invalid entries
or a single entry.
We should always pick up the maximum clocks for each state as a final
state in this case to prevent validation from failing if the table is
malformed.
We should also contain sensible defaults in the case where values
are invalid.
Redfine the clock table structures by adding a 314 prefix to make
debugging these issues easier by avoiding symbol name clashes.
Overall this policy more closely aligns to how we did things for 315,
but because of how the voltage rail is setup we should favor keeping
DCFCLK low rather than DISPCLK or DPPCLK - so use the max for those
in every entry.
Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Recent backport from opensource broke the Nightly tool build
that tests DC and DML for bugs and regressions. This was
because the backport had a header inclusion that was not
consistent with the AMD style of including headers was allowed
to be merged back in DML code that caused tool compilation
failures.
[How]
Modify the way in which the header file in included so that it
is consistent with AMD style of including headers. This then
automatically fixes the tool compilation process and also
helps maintain the code quality and consistency.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pipes for MPO primary and overlay will be power down and power up during
plug/unplug external monitor while MPO video playback.
But the pipes were the same after plug/unplug and should not need to be
power down and power up or it will make page flip interrupt disabled and
cause hang issue.
[How]
Add pipe split change condition that not only check the top pipe pointer
but also check the index of top pipe if both top pipes are available.
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need a way to retain default clock table to aid
the investigation into why 8k@30 display not
lighting up on dcn314
[How]
Use flag to prevent execution of bw_params helper
function and function for updating bw_bounding_box
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned
between different HDMI lanes when using YCbCr420 10-bit pixel format.
BIOS functions for transmitter/encoder control take pixel clock in kHz
increments, whereas the function for setting the pixel clock is in 100Hz
increments. Setting pixel clock to a value that is not on a kHz boundary
will cause the issue.
[How]
Round pixel clock down to nearest kHz in 10/12-bpc cases.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
-Fix edp panel missing event
-Set ARGB16161616 pixel format to 26
-Fix dcn32 interger issue
-Clear optc underflow bit after ODM clock off
-Fix issue with stereo3D
-Fix DML2 lightup issue
-Correct DTBCLK for dcn314
-Revert for a regression
-Fix clocks and bugs in DML2
-Enable SubVP by defalut on DCN32 & DCN321
-Corret boundary condition for engin ID on DCN303
-Fix FRL encoder override registry key
-Fix VPG for dcn314 HPO
-Fix Linux compile-time warning
-Add new prefetch modes in DML for DCN32
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green
point failures in HDR10 DTN tests. The re-implementation of ARGB16161616
was to fix this however it did not actually fix this issue but a side effect of the
issue.
[HOW]
Change ARGB16161616 pixel format to 26.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Move fpu file to dml folder
- Fix CAB allocation for multiple displays
- Add a variable to update FCLK
- Fix TMDS 4K@60Hz YCbCr420 corruption issue
- Fix MPC tree infinite loop in some case
- Fix HDMI VSIF V3 blank screen issue
- Add some documentation to the code
- Allow alternate prefetch modes in DML for DCN32
- Fix VPG instancing for dcn314 HPO
- Check correct bounds for stream encoder instances for DCN303
- Enable SubVP by default on DCN32 & DCN321
- Fix DTBCLK not correct for dcn314
- Fix Compile-time warning
- Fix the stereo mode hang issue
- Fix display light up issue
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
SUBVP_START_LINE must be aligned to 2 swaths, so add
16 lines of margin so the start line can be adjusted by
up to 16 lines for alignment purposes in FW.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After TDR recovery, eDP and USB4 display does not light up. Because
dmub outbox notifications are not enabled after dmub reload and link
encoder assignments for the streams are not cleared before dc state
reset.
[How]
- Dmub outbox notification is enabled after tdr recovery by issuing
inbox command to dmub.
- Link encoders for the streams are unassigned before dc state reset.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After ODM clock off, optc underflow bit will be kept there always and clear not work.
We need to clear that before clock off.
[How]
Clear that if have when clock off.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fudong Wang <Fudong.Wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
MALL not supported with stereo3D according
to DCN doc.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Observed in stereomode that programming FLIP_LEFT_EYE
can cause hangs. Keep FLIP_ANY_FRAME in stereo mode so
the surface flip can take place before left or right eye
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Reverts commit "attempt to fix the logic in commit_planes_for_stream()"
since it caused a regression.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DTBCLK clocks reset after clocks are initialized
and bounding box values are also incorrect.
[How]
Use dcn31 init clock function programming sequence
and correct bounding box values for dcn314
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Set the debug options to enable SubVP feature
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
eng_id for DCN303 cannot be more than 1, since we have only two
instances of stream encoders.
Check the correct boundary condition for engine ID for DCN303 prevent
the potential out of bounds access.
Fixes: cd6d421e3d ("drm/amd/display: Initial DC support for Beige Goby")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
An issue during VPG indexing offset generation causing
to use the incorrect VPG. HW team placed VPG instances
5 at end of list, making it VPG 9 in register headers.
[How]
Correct VPG instance for HPO encoders.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed bracketing around condition statement.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver is restricting voltage levels if system cannot switch
in vblank.
[How]
Change allow_for_pstate_or_stutter_in_vblank_final from
dm_prefetch_support_uclk_fclk_and_stutter to
dm_prefetch_support_uclk_fclk_and_stutter_if_possible.
Add support for a new registry property,
DalDMLDisallowAlternatePrefetchModes, for easier debugging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some cases MPC tree bottom pipe ends up point to itself. This causes
iterating from top to bottom to hang the system in an infinite loop.
[How]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enabling stream with tg lock makes config settings
pending causing the garbage until tg unlock.
[How]
Keep the original lock mechanism
The driver doesn't lock tg if plane_state is null.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DIG_FIFO_OUTPUT_PIXEL_MODE not being set for dcn314
resulting in incorrect timing for YCbCr4:2:0
[How]
Copy the implementation of set_pixels_per_cycle from dcn32
over to dcn314
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Add a variable to update FCLK latency
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When multiple displays are used, the underlying framebuffers could be
two separate framebuffers, or a single large framebuffer. Fix the
calculation logic for CAB to account for large framebuffer. Current
logic assumes that any FB that the plane points to are independent. When
a single FB is used on the system, this does 2 times allocation.
Add a check to prevent duplicate allocation by checking if the base
addresses are the same, and then ensuring that the if we allocate using
the pitch, whole of the other fbs will be accounted for in the first
allocation.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At this point, we isolate the FPU code associated with DCN314 under the
DML folder. This commit drops the FPU flags from the Makefile.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function responsible for populating DML pipes has some FPU
operations, and for this reason, it must be moved to the dml folder.
This commit moves such function from resource to the fpu file under the
dml folder.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN314 has multiple references to FPU operations inside the resource
files, and we need to move those codes to the DML folder. This commit
creates the dcn314_fpu files and moves the bounding box operation to
this file.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP DSC YCbCr422 not working because dcn314_calculate_dccg_k1_k2_values
does not account for two pixels per container
[How]
Replace the contents of dcn314_calculate_dccg_k1_k2_values with the
code from the function dcn32_calculate_dccg_k1_k2_values
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC version is 11.0.1 rather than 11.0.2
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing headers to solve the following warnings from sparse:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:656:17: warning: symbol 'ddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:693:17: warning: symbol 'lpddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:730:17: warning: symbol 'lpddr4_wm_table_with_disabled_ppt' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:767:17: warning: symbol 'ddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:804:17: warning: symbol 'ddr4_1R_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:841:17: warning: symbol 'lpddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:217:17: warning: symbol 'ddr4_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:254:17: warning: symbol 'lpddr5_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:53:30: warning: symbol 'dcn3_1_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:197:30: warning: symbol 'dcn3_15_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:293:30: warning: symbol 'dcn3_16_ip' was not declared. Should it be static?
Fixes: 1a3408259b ("drm/amd/display: move FPU code on dcn21 clk_mgr")
Fixes: 5085e0361f ("drm/amd/display: move FPU code from dcn301 clk mgr to DML folder")
Fixes: 26f4712aed ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Fixes: fa896297b3 ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder")
Fixes: 3f8951cc12 ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder")
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since "rn_clk_mgr.h" needs ‘struct clk_mgr_internal’ which is declared
in "clk_mgr_internal.h", include "clk_mgr_internal.h" in "rn_clk_mgr.h"
instead of in its source file.
Because of the change above, change the order of '#include
"rn_clk_mgr.h"', so that the necessary structs are visible to
dcn20_clk_mgr.h.
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As "dcn3_1_soc", "dcn3_15_soc", and "dcn3_16_soc" are not used outside
of their corresponding "dcn3*_fpu.c", make them static and remove their
extern declaration.
Fixes: 26f4712aed ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Fixes: fa896297b3 ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder")
Fixes: 3f8951cc12 ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder")
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two identical CFLAGS entries for "display_mode_vba_20.o", so
remove one of them. Also, as there's already an entry for
"display_mode_lib.o" CFLAGS, regardless of CONFIG_DRM_AMD_DC_DCN being
defined or not, remove the one entry between CONFIG_DRM_AMD_DC_DCN ifdef
guards.
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit bac4b41d91.
This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c3b3f9ba25.
This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3c3abac601.
This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 86e4863e67.
This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add the missing definition to set the register field
HBLANK_MINIMUM_SYMBOL_WIDTH
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We got a report from Stephen/Michael that the PowerPC build was failing
with the following error:
ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float
ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o
This error happened because of the function optc3_set_vrr_m_const. This
function expects a double as a parameter in a code that is not allowed
to have FPU operations. After further investigation, it became clear
that optc3_set_vrr_m_const was never invoked, so we can safely drop this
function and fix the ld issue.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All references to struct freesync_context were removed, so remove the
struct freesync_context itself and its entry on struct dc_stream_state.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c:2344:67-68: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
