The VBT gained some bits to inidicate the max FRL rate for
HDMI 2.1, define them.
These just outright replaced the slave_port bits for ganged eDP.
Apparently that feature was never actually used so someone decided
that reusing the bits is fine. Although the actual ganged eDP
enable bit was still left defined elsewhere for some reason.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715202044.11153-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use a more standard form for the VT version number comments.
One slight oddball case is the dp_max_link_rate that had two
version numbers (216/230) and a platform name (GLK). The
story goes that the field was introduced in the spec in
version 216, along with a note that it's used on CNL+. Later
in version 230 the definition of the bit was changed in
bacakwards incompatible ways and the CNL note disappeard.
For us the original CNL+ note in the header got changed to
to GLK+ when all CNL support was dropped from the codebase.
We do still need (and have) handling for both the 216+ and
the 230+ defintions (parse_bdb_216_dp_max_link_rate() vs.
parse_bdb_230_dp_max_link_rate()).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715202044.11153-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Each LFP may have different panel type which is stored in LFP data
data block. Based on the child device index respective panel-type/
panel-type2 field will be used.
v1: Initial rfc verion.
v2: Based on review comments from Jani,
- Used panel-type instead addition panel-index variable.
- DEVICE_HANDLE_* name changed and placed before DEVICE_TYPE_*
macro.
v3:
- passing intel_bios_encoder_data as argument of
intel_bios_init_panel(). Passing NULL to indicate encoder is not
initialized yet for dsi as current focus is to enable dual EDP. [Jani]
v4:
- encoder->devdata used which is initialized before from vbt
structure. [Jani]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620065138.5126-1-animesh.manna@intel.com
The eDP BDB block has gained yet another max link rate field.
Let's parse it and consult it during the source rate filtering.
v2: *20 instead of *2 to get the correct units (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602205723.11341-1-ville.syrjala@linux.intel.com
We're not parsing the 5.4 Gbps value for the old eDP fast link
training link rate, nor are we parsing the new fast link training
link rate field. Remedy both.
Also we'll now use the actual link rate instead of the DPCD BW
register value.
Note that we're not even using this information for anything
currently, so should perhaps just nuke it all unless someone
is planning on implementing fast link training finally...
v2: Stop using the DPCD BW values (Jani)
*20 instead of *2 to get the rate in correct units (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602205649.11283-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Document the fact that struct lvds_lfp_data_entry can't be used
directly and instead must be accessed via the data table pointers.
Also remove the bogus comment implying that there might be a
variable number of panel entries in the table. There are always
exactly 16.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-5-ville.syrjala@linux.intel.com
We need to start parsing stuff from the tail end of the LFP data block.
This is made awkward by the fact that the fp_timing table has variable
size. So we must use a bit more finesse to get the tail end, and to
make sure we allocate enough memory for it to make sure our struct
representation fits.
v2: Rebase due to the preallocation of BDB blocks
v3: Rebase due to min_size WARN relocation
v4: Document BDB_LVDS_LFP_DATA vs. BDB_LVDS_LFP_DATA_PTRS order (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-4-ville.syrjala@linux.intel.com
In addition to the fp_timing,dvo_timing,panel_pnp_id tables
there also exists a panel_name table. Unlike the others this
is just one offset+table_size even though there are still 16
actual panel_names in the data block.
The panel_name table made its first appearance somewhere
around VBT version 156-163. The exact version is not known.
But we don't need to know that since we can just check whether
the pointers block has enough room for it or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
VBT 249 update to support more TMDS clock rate 3.00G, 3.40G
and 5.94G. Refer to this new definition to configure max
TMDS clock rate for HDMI driver.
BSpec: 20124
v2: new subject
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303083802.5071-1-shawn.c.lee@intel.com
A new programming step was added to combo and TC PLL sequences.
If override_AFC_startup is set in VBT, driver should overwrite
AFC_startup value to 0x0 or 0x7 in PLL's div0 register.
The current understating is that only TGL needs this and all other
display 12 and newer platforms will have a older VBT or a newer VBT
with override_AFC_startup set to 0 but in any case there is a
drm_warn_on_once() to let us know if this is not true.
v2:
- specification updated, now AFC can be override to 0x0 or 0x7
- not using a union for div0 (Imre)
- following previous wrong vbt naming: bits instead of bytes (Imre)
BSpec: 49204
BSpec: 20122
BSpec: 49968
BSpec: 71360
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216134059.25348-1-jose.souza@intel.com
Replace the DEVICE_TYPE_DP_DUAL_MODE_BITS stuff with just
a DP+HDMI check. The rest of the bits shouldn't really
matter anyway.
The slight change in behaviour here is that now we do look at
the DEVICE_TYPE_NOT_HDMI_OUTPUT bit (via
intel_bios_encoder_supports_hdmi()) when we previously ignored it.
The one platform we know that has problems with that bit is VLV.
But IIRC the problem was always that buggy VBTs basically never
set that bit. So that should be OK since all it would do is make
all DVI ports look like HDMI ports instead. Also can't imagine
there are many VLV machines with actual DVI ports in existence.
We still keep the rest of the dvo_port/aux_ch checks as we
can't trust that DP+HDMI device type equals DP++ due to
buggy VBTs.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Now that we parse the DDI port info from the VBT on all g4x+ platforms
we can throw out all the old codepaths in intel_bios_is_port_present(),
intel_bios_is_port_edp() and intel_bios_is_port_dp_dual_mode(). None
of these should be called on pre-g4x platforms.
For good measure throw in a WARN into intel_bios_is_port_present()
should someone get the urge to call it on older platforms. The
other two functions are specific to HDMI and DP so should not need
any protection as those encoder types don't even exist on older
platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
From VBT, ddc pin info suggests the following mapping:
VBT DRIVER
DDI TC1->ddc_pin=3 should translate to PORT_TC1->0x9
DDI TC2->ddc_pin=4 should translate to PORT_TC2->0xa
DDI TC3->ddc_pin=5 should translate to PORT_TC3->0xb
DDI TC4->ddc_pin=6 should translate to PORT_TC4->0xc
Adding pin map to facilitate this translation as we cannot use existing
icl ddc pin map due to conflict with DDI C and DDI TC1 info.
Bspec:20124
v2:
- Changed Author to Tejas Upadhyay
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203073720.3823371-1-ravitejax.goud.talla@intel.com
With patch "drm/i915/vbt: Fix backlight parsing for VBT 234+"
the size of bdb_lfp_backlight_data structure has been increased,
causing if-statement in the parse_lfp_backlight function
that comapres this structure size to the one retrieved from BDB,
always to fail for older revisions.
This patch calculates expected size of the structure for a given
BDB version and compares it with the value gathered from BDB.
Tested on Chromebook Pixelbook (Nocturne) (reports bdb->version = 221)
Fixes: d381baad29 ("drm/i915/vbt: Fix backlight parsing for VBT 234+")
Tested-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930134606.227234-1-lma@semihalf.com
According to Bspec #20124, max link rate table for DP was updated
at BDB version 230. Max link rate can support upto UHBR.
After migrate to BDB v230, the definition for LBR, HBR2 and HBR3
were changed. For backward compatibility. If BDB version was
from 216 to 229. Driver have to follow original rule to configure
DP max link rate value from VBT.
v2: split the mapping table to two for old and new BDB definition.
v3: return link rate instead of assigning it.
v4: remove the useless variable.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
[vsyrjala: Try to retain the comment that VBT version 216 added some of this]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210218052333.16109-1-shawn.c.lee@intel.com
ADL-S requires TC pins to set up ddc for Combo PHY B, C, D and E.
Combo PHY A still uses the old ddc pin mapping.
From VBT, ddc pin info suggests the following mapping:
VBT DRIVER
DDI B->ddc_pin=2 should translate to PORT_D->0x9
DDI C->ddc_pin=3 should translate to PORT_E->0xa
DDI D->ddc_pin=4 should translate to PORT_F->0xb
DDI E->ddc_pin=5 should translate to PORT_G->0xc
Adding pin map to facilitate this translation as we cannot use existing
icl ddc pin map due to conflict with DDI B and DDI C info.
Bspec:20124
v2: Replace IS_ALDERLAKE_S() with HAS_PCH_ADP() as the pin map pairing
depends on the PCH being used rather than the platform.(mdroper)
v3:
- Modify adls_port_to_ddc_pin() to make PHY_A the special case for
check, else return pin mapping based on correct arithmetic with phy
offset. Remove redundant platform checks and use HAS_PCH_ADP() instead
of IS_ALDERLAKE_S() in intel_hdmi_ddc_pin().(mdroper)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-9-aditya.swarup@intel.com
After boot into kernel. Driver configured ddc pin mapping based on
predefined table in parse_ddi_port(). Now driver configure rkl
ddc pin mapping depends on icp_ddc_pin_map[]. Then this table will
give incorrect gmbus port number to cause HDMI can't work.
Refer to commit cd0a89527d ("drm/i915/rkl: Add DDC pin mapping").
Create two ddc pin table for rkl TGP and CMP pch. Then HDMI can
works properly on rkl.
v2: update patch based on latest dinq branch.
v3: update ddc table for RKL+TGP sku.
RKL+CNP sku will load cnp_ddc_pin_map[] setting.
v4: modify the if/else judgment to avoid nesting.
v5: fix typo in v4.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2577
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117142629.28729-1-shawn.c.lee@intel.com
Child min_brightness is obsolete from VBT 234+, instead the new
min_brightness field in the main structure should be used.
This new field is 16 bits wide, so backlight_precision_bits is needed
to check if value needs to be scaled down but it is only available in
VBT 236+ so working around it by using the also new backlight_level
in the main struct.
v2:
- missed that backlight_data->level is also obsolete
v3:
- s/backlight/brightness to better match specification
- using u16 to specify brightness level instead of a u32 : 16
BSpec: 20149
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008211932.24989-1-jose.souza@intel.com
HOBL means hours of battery life, it is a power-saving feature
were supported motherboards can use a special voltage swing table
that uses less power.
So here parsing the VBT to check if this feature is supported.
BSpec: 20150
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708205512.21625-3-jose.souza@intel.com
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507185408.GA14561@embeddedor
Check for child devices that specify compression, and store the device
specific compression parameters in the display device data struct for
later use. Warn if compression is requested but not available.
Use fairly rigid checks for compression data for starters. These can be
made more dynamic later.
Log about DSC presence in DDI port parse, though this is not universal
across platforms or port types (DSI).
v2: amended debug logging
Bspec: 29885
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/357d685ba047faf2285138c2f7014a8dee9a12b7.1575974743.git.jani.nikula@intel.com
From VBT 228+ this is block that PSR and other power saving
features configuration should be read from.
v3:
Using DRRS from this new block
v4:
Using BIT()
Fixing DRRS comment in parse_power_conservation_features()
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-5-jose.souza@intel.com
VBT revision 229 adds a new "Generic DTD" block 58 and deprecates the
old LFP panel mode data in block 42. Let's start parsing this block to
fill in the panel fixed mode on devices with a >=229 VBT.
v2:
* Update according to the recent updates:
- DTD size is now 16 bits instead of 24
- polarity is now just a single bit for hsync and vsync and is
properly documented
* Minor checkpatch fix
v3:
* Now that panel options are parsed separately from the previous patch,
move generic DTD parsing into a function parallel to
parse_lfp_panel_dtd. We'll still fall back to looking at the legacy
LVDS timing block if the generic DTD fails. (Jani)
* Don't forget to actually set lfp_lvds_vbt_mode! (Jani)
* Drop "bdb_" prefix from dtd entry structure. (Jani)
* Follow C99 standard for structure's flexible array member. (Jani)
v4:
* Add "positive" to polarity field names for clarity. (Jani)
* Move VBT version check and fallback to legacy DTD parsing logic to a
helper to keep top-level VBT parsing uncluttered. (Jani)
* Restructure reserved bit packing at end of generic_dtd_entry from
"u32 rsvd:24" to "u8 rsvd[3]" to prevent copy/paste mistakes in the
future. (Jani)
Bspec: 54751
Bspec: 20148
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115165132.9472-3-matthew.d.roper@intel.com
Our pin mapping tables for ICP and MCC currently only list the standard
GPIO pins used for various output ports. Even through ICP's standard
pin usage only utilizes pins 1, 2, and 9-12, and MCC's standard pin
usage only uses pins 1, 2, and 9, these platforms do still have GPIO
registers to address pins in the range 1-3 and 9-14. OEM's may remap
GPIO usage in non-standard ways (and provide the actual mapping via VBT
settings), so we shouldn't exclude pins on these platforms just because
they aren't part of the standard mappings.
TGP's standard pin tables contains all the possible pins, so let's
rename them to "icp" and use them for all PCH >= PCH_ICP. This will
prevent intel_gmbus_is_valid_pin from rejecting non-standard pin usage
that an OEM specifies via the VBT.
Note that this will cause pin 9 to be labeled as "tc1" instead of "dpc"
in debug messages on platforms with the MCC PCH, but that may actually
help avoid confusion since the text strings will now be the same on all
gen11+ platforms instead of being different on just EHL.
v2: Drop now-unused MCC_DDC_BUS_DDI_* names.
v3: We want to compare against INTEL_PCH_TYPE, not INTEL_PCH_ID.
Bspec: 8417
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817005041.20651-1-matthew.d.roper@intel.com
A single 32-bit PSR2 training pattern field follows the sixteen element
array of PSR table entries in the VBT spec. But, we incorrectly define
this PSR2 field for each of the PSR table entries. As a result, the PSR1
training pattern duration for any panel_type != 0 will be parsed
incorrectly. Secondly, PSR2 training pattern durations for VBTs with bdb
version >= 226 will also be wrong.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org #v5.2
Fixes: 88a0d9606a ("drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup time")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111088
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204183
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: François Guerraz <kubrick@fgv6.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717223451.2595-1-dhinakaran.pandiyan@intel.com
Although EHL introduces a new PCH, the South Display part of the PCH
that we care about is nearly identical to ICP, just with some pins
remapped. Most notably, Port C is mapped to the pins that ICP uses for
TC Port 1.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190615004210.16656-1-matthew.d.roper@intel.com
Now that we have a new subdirectory for display code, continue by moving
modesetting core code.
display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.
v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
2019-06-17 11:48:32 +03:00
Renamed from drivers/gpu/drm/i915/intel_vbt_defs.h (Browse further)
