In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER.
Reviewed-by: Sean Young <sean@mess.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.
Nothing major in here, lots of little things with new devices supported
and updates for a few drivers. Highlights include:
- thunderbolt/USB4 devices supported a bit better than before,
and some new ids to enable new hardware devices
- USB gadget uvc updates for newer video formats and better v4l
integration (the v4l portions were acked by those maintainers)
- typec updates for tiny issues and more typec drivers for new
chips.
- xhci tiny updates for minor issues
- big usb-serial ftdi_sio driver update to handle new devices
better
- lots of tiny dwc3 fixes and updates for the IP block that is
showing up everywhere these days
- dts updates for new devices being supported
- other tiny janitorial and cleanups fixes for lots of different
USB drivers. Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BN9g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yljdgCdH4Fev4Nvf2Nokfv0q0krcRB3YpUAn1aZfpb/
EbgxsxhPnTJg+mmXyLms
=IxUy
-----END PGP SIGNATURE-----
Merge tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.
Nothing major in here, lots of little things with new devices
supported and updates for a few drivers. Highlights include:
- thunderbolt/USB4 devices supported a bit better than before, and
some new ids to enable new hardware devices
- USB gadget uvc updates for newer video formats and better v4l
integration (the v4l portions were acked by those maintainers)
- typec updates for tiny issues and more typec drivers for new chips.
- xhci tiny updates for minor issues
- big usb-serial ftdi_sio driver update to handle new devices better
- lots of tiny dwc3 fixes and updates for the IP block that is
showing up everywhere these days
- dts updates for new devices being supported
- other tiny janitorial and cleanups fixes for lots of different USB
drivers. Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: gadget: uvc: don't put item still in use
usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()
usb: host: ehci-exynos: switch to using gpiod API
Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""
dt-bindings: usb: Convert FOTG210 to dt schema
usb: mtu3: fix failed runtime suspend in host only mode
USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"
usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra
usb: typec: Replace custom implementation of device_match_fwnode()
usb: typec: ucsi: Don't warn on probe deferral
usb: add quirks for Lenovo OneLink+ Dock
MAINTAINERS: switch dwc3 to Thinh
usb: idmouse: fix an uninit-value in idmouse_open
USB: PHY: JZ4770: Switch to use dev_err_probe() helper
usb: phy: generic: Switch to use dev_err_probe() helper
usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs
usb: cdns3: remove dead code
usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair
usb: musb: sunxi: Switch to use dev_err_probe() helper
...
-----BEGIN PGP SIGNATURE-----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=MHQ/
-----END PGP SIGNATURE-----
Merge tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for Mediatek MDP V3
- New driver for NXP i.MX DW100 dewarper
- Zoran driver got promoted from staging
- Hantro and related drivers got promoted from staging
- Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu,
meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci,
zr364xx)
- Usual set of driver fixes, improvements and cleanups
* tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits)
media: destage Hantro VPU driver
media: platform: mtk-mdp3: add MediaTek MDP3 driver
media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
media: dt-binding: mediatek: add bindings for MediaTek MDP3 components
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
media: xilinx: video: Add 1X12 greyscale format
media: xilinx: csi2rxss: Add 1X12 greyscale format
media: staging: media: imx: imx7-media-csi: Increase video mem limit
media: uvcvideo: Limit power line control for Sonix Technology
media: uvcvideo: Use entity get_cur in uvc_ctrl_set
media: uvcvideo: Fix typo 'the the' in comment
media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl()
media: uvcvideo: Fix memory leak in uvc_gpio_parse
media: renesas: vsp1: Add support for RZ/G2L VSPD
media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit
media: renesas: vsp1: Add support for VSP software version
media: renesas: vsp1: Add support to deassert/assert reset line
media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings
media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
media: amphion: fix a bug that vpu core may not resume after suspend
...
The uvc_format_desc, GUID defines and the uvc_format_by_guid helper is
also useful for the uvc gadget stack. This patch moves them to a common
header.
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220909221335.15033-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions uvc_simplify_fraction and uvc_fraction_to_interval are
generic helpers which are also useful for other v4l2 drivers. This patch
moves them to v4l2-common.
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220909221335.15033-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Quanta 0408:4034 camera implements UVC 1.5, and thus sets
bInterfaceProtocol to UVC_PC_PROTOCOL_15. Commit 95f03d9734 ("media:
uvcvideo: Limit power line control for Quanta cameras") added a quirk
for the device that incorrectly specified the UVC 1.0 protocol,
rendering the quirk inoperative. Fix it.
Link: https://lore.kernel.org/linux-media/20220822131754.102393-1-ribalda@chromium.org
Fixes: 95f03d9734 ("media: uvcvideo: Limit power line control for Quanta cameras")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Previously the unit buffer was allocated before checking the IRQ for
privacy GPIO. In case of error, the unit buffer was leaked.
Allocate the unit buffer after the IRQ to avoid it.
Addresses-Coverity-ID: 1474639 ("Resource leak")
Fixes: 2886477ff9 ("media: uvcvideo: Implement UVC_EXT_GPIO_UNIT")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Two more cameras do not implement the power line control correctly. Add
a corresponding control mapping override.
Bus 001 Device 003: ID 0408:4034 Quanta Computer, Inc. ACER HD User Facing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x0408 Quanta Computer, Inc.
idProduct 0x4034
bcdDevice 0.01
iManufacturer 1 Quanta
iProduct 2 ACER HD User Facing
iSerial 3 01.00.00
bNumConfigurations 1
Bus 001 Device 003: ID 0408:4030 Quanta Computer, Inc. HD User Facing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x0408 Quanta Computer, Inc.
idProduct 0x4030
bcdDevice 0.02
iManufacturer 1 Quanta
iProduct 2 HD User Facing
iSerial 3 01.00.00
bNumConfigurations 1
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The link to the web page that explains continued fractions is broken.
Replace it with a link to the corresponding Wikipedia page.
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The uvcvideo driver historically uses the
/* Comment
* style
*/
for multi-line block comments, which is frowned upon. Patches for the
driver are required to use the more standard
/*
* Comment
* style
*/
style. This result in inconsistencies. Fix it by converting all
remaining instances of the old style.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch aims to add UVC_GUID_FORMAT_H265
High Efficiency Video Coding (HEVC), also known as H.265 and MPEG-H Part 2.
They describe the same video encoding method.
So for handling their behavior is the same.
However, when external camera device describes this encoding method,
some use hevc, some use h265.
There is no uniform specification to describe this encoding method.
So if an external camera device use h265 to describe this encoding method,
driver will not recognize it.
Therefore, this patch is to enable driver to read HEVC/H265
and convert it to V4L2_PIX_FMT_HEVC.
Signed-off-by: James_Lin <Ping-lei.Lin@mediatek.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Replace manual decoding of psize in uvc_parse_streaming(), with the code
from uvc_endpoint_max_bpi(). It also handles usb3 devices.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As discussed with other developers, the linux-uvc-devel mailing list is
not very useful anymore, and it's better to send people to the general
linux-media mailing list.
Replace/remove the old mailing list address in uvcvideo.rst and
MAINTAINERS.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Adds the requisite device id to support detection of the Apple FaceTime
HD webcam exposed over the T2 BCE VHCI interface.
Tested-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Paul Pawlowski <paul@mrarm.io>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A lot of userspace depends on a descriptive name for vdev. Without this
patch, users have a hard time figuring out which camera shall they use
for their video conferencing.
This reverts commit e3f60e7e1a.
Link: https://lore.kernel.org/linux-media/20211207003840.1212374-2-ribalda@chromium.org
Cc: <stable@vger.kernel.org>
Fixes: e3f60e7e1a ("media: uvcvideo: Set unique vdev name based in type")
Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Never return V4L2_COLORSPACE_DEFAULT. From the standard:
"""
In the absence of this descriptor, or in the case of
“Unspecified” values within the descriptor, color matching
defaults will be assumed. The color matching defaults are
compliant with sRGB since the BT.709 transfer function and
the sRGB transfer function are very similar.
"""
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Tested-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All the entities must have a unique name. We can have a descriptive and
unique name by appending the function and the entity->id.
This is even resilent to multi chain devices.
Fixes v4l2-compliance:
Media Controller ioctls:
fail: v4l2-test-media.cpp(205): v2_entity_names_set.find(key) != v2_entity_names_set.end()
test MEDIA_IOC_G_TOPOLOGY: FAIL
fail: v4l2-test-media.cpp(394): num_data_links != num_links
test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pass the chain instead of the device. We want to keep the reference to
the chain that controls belong to.
We need to delay the initialization of the controls after the chains
have been initialized.
This is a cleanup needed for the next patches.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove including <linux/version.h> that don't need it.
V1->V2: Split the patch in two.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some devices reference an output terminal as the source of extension
units. This is incorrect, as output terminals only have an input pin,
and thus can't be connected to any entity in the forward direction. The
resulting topology would cause issues when registering the media
controller graph. To avoid this problem, connect the extension unit to
the source of the output terminal instead.
While at it, and while no device has been reported to be affected by
this issue, also handle forward scans where two output terminals would
be connected together, and skip the terminals found through such an
invalid connection.
Reported-and-tested-by: John Nealy <jnealy3@yahoo.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
An error message in the forward scan code incorrectly prints the ID of
the source entity instead of the XU entity being scanned. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The use of strncpy is discouraged, use strscpy instead.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
trace isn't a good name as it's not a trace mechanism, it is a
typical debug mechanism.
Rename uvc_trace/uvc_trace_cont macros to uvc_dbg/uvc_dbg_cont.
Rename uvc_trace_param to uvc_dbg_param
Rename UVC_TRACE_<FOO> defines to UVC_DBG_<FOO>
Use ## concatenation in uvc_dbg macros to avoid overly long and
repetitive UVC_DBG uses
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of calling prink() inside uvc_trace, use dev_printk(), which adds
context to the output.
Now that we are at it, regroup the strings so the messages can be easily
"grepable".
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove all the duplicated code around printk(KERN_CONT, with a new macro.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace all the uses of printk() and uvc_printk() with its
equivalent dev_ alias macros.
Modify uvc_warn_once() macro to use dev_info instead printk().
They are more standard across the kernel tree and provide
more context about the error.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some devices can implement a physical switch to disable the input of the
camera on demand. Think of it like an elegant privacy sticker.
The system can read the status of the privacy switch via a GPIO.
It is important to know the status of the switch, e.g. to notify the
user when the camera will produce black frames and a videochat
application is used.
In some systems, the GPIO is connected to the main SoC instead of the
camera controller, with the connection reported by the system firmware
(ACPI or DT). In that case, the UVC device isn't aware of the GPIO. We
need to implement a virtual entity to handle the GPIO fully on the
driver side.
For example, for ACPI-based systems, the GPIO is reported in the USB
device object:
Scope (\_SB.PCI0.XHCI.RHUB.HS07)
{
/.../
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0064
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"privacy-gpio",
Package (0x04)
{
\_SB.PCI0.XHCI.RHUB.HS07,
Zero,
Zero,
One
}
}
}
})
}
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Avoid an underflow while calculating the number of inputs for entities
with zero pads.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Increase the size of the id, to avoid collisions with entities
implemented by the driver that are not part of the UVC device.
Entities exposed by the UVC device use IDs 0-255, extra entities
implemented by the driver (such as the GPIO entity) use IDs 256 and
up.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of having multiple copies of the entity guid on the code, move
it to the entity structure.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Shenzhen Aoni Electronic Co.,Ltd 2K FHD camera reports a UVC 1.10
version, but implements UVC 1.0a as shown by the UVC probe control being
26 bytes long. Force the UVC version for that device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Doncho Minkov <donchominkov@gmail.com>
Tested-by: Doncho Minkov <donchominkov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Color Matching Descriptor has been present in USB cameras since
the original version of UVC, but it has never been fully exposed
in Linux.
This change informs V4L2 of all of the UVC colorspace parameters:
color primaries, transfer characteristics, and YCbCr encoding.
videodev2.h doesn't have values for all the possible UVC color settings,
so it is mapped as closely as possible.
Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add HEVC GUID and assotiate with HEVC pixel format so that frame
based format descriptors recognized by the UVC video driver.
Signed-off-by: Dmitry Buzdyk <dima.buzdyk@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This device does not function correctly in raw mode in kernel
versions validating buffer sizes in bulk mode. It erroneously
announces 16 bits per pixel instead of 12 for NV12 format, so it
needs this quirk to fix computed frame size and avoid legitimate
frames getting discarded.
[Move info and div variables to local scope]
Signed-off-by: Sergey Zakharchenko <szakharchenko@digital-loggers.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Way back in 2017, fuzzing the 4.14-rc2 USB stack with syzkaller kicked
up the following WARNING from the UVC chain scanning code:
| list_add double add: new=ffff880069084010, prev=ffff880069084010,
| next=ffff880067d22298.
| ------------[ cut here ]------------
| WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0
| Modules linked in:
| CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted
| 4.14.0-rc2-42613-g1488251d1a98 #238
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
| Workqueue: usb_hub_wq hub_event
| task: ffff88006b01ca40 task.stack: ffff880064358000
| RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29
| RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286
| RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000
| RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac
| RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000
| R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010
| R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0
| FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000
| CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
| CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0
| Call Trace:
| __list_add ./include/linux/list.h:59
| list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92
| uvc_scan_chain_forward.isra.8+0x373/0x416
| drivers/media/usb/uvc/uvc_driver.c:1471
| uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585
| uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769
| uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104
Looking into the output from usbmon, the interesting part is the
following data packet:
ffff880069c63e00 30710169 C Ci:1:002:0 0 143 = 09028f00 01030080
00090403 00000e01 00000924 03000103 7c003328 010204db
If we drop the lead configuration and interface descriptors, we're left
with an output terminal descriptor describing a generic display:
/* Output terminal descriptor */
buf[0] 09
buf[1] 24
buf[2] 03 /* UVC_VC_OUTPUT_TERMINAL */
buf[3] 00 /* ID */
buf[4] 01 /* type == 0x0301 (UVC_OTT_DISPLAY) */
buf[5] 03
buf[6] 7c
buf[7] 00 /* source ID refers to self! */
buf[8] 33
The problem with this descriptor is that it is self-referential: the
source ID of 0 matches itself! This causes the 'struct uvc_entity'
representing the display to be added to its chain list twice during
'uvc_scan_chain()': once via 'uvc_scan_chain_entity()' when it is
processed directly from the 'dev->entities' list and then again
immediately afterwards when trying to follow the source ID in
'uvc_scan_chain_forward()'
Add a check before adding an entity to a chain list to ensure that the
entity is not already part of a chain.
Link: https://lore.kernel.org/linux-media/CAAeHK+z+Si69jUR+N-SjN9q4O+o5KFiNManqEa-PjUta7EOb7A@mail.gmail.com/
Cc: <stable@vger.kernel.org>
Fixes: c0efd23292 ("V4L/DVB (8145a): USB Video Class driver")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When parsing the UVC control descriptors fails, the error path tries to
cleanup a media device that hasn't been initialised, potentially
resulting in a crash. Fix this by initialising the media device before
the error handling path can be reached.
Fixes: 5a254d751e ("[media] uvcvideo: Register a v4l2_device")
Reported-by: syzbot+c86454eb3af9e8a4da20@syzkaller.appspotmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uvc driver uses this function to fill in bus_info for VIDIOC_QUERYCAP,
so use the same function when filling in the bus_info for the media device.
The current implementation only fills in part of the info. E.g. if the full
bus_info is usb-0000:01:00.0-1.4.2, then the media bus_info only has 1.4.2.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When initially testing the Camera Terminal Descriptor wTerminalType
field (buffer[4]), no mask is used. Later in the function, the MSB is
overloaded to store the descriptor subtype, and so a mask of 0x7fff
is used to check the type.
If a descriptor is specially crafted to set this overloaded bit in the
original wTerminalType field, the initial type check will fail (falling
through, without adjusting the buffer size), but the later type checks
will pass, assuming the buffer has been made suitably large, causing an
overflow.
Avoid this problem by checking for the MSB in the wTerminalType field.
If the bit is set, assume the descriptor is bad, and abort parsing it.
Originally reported here:
https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8
A similar (non-compiling) patch was provided at that time.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Newer high definition cameras, and cameras with multiple lenses such as
the range of stereo-vision cameras now available have ever increasing
data rates.
The inclusion of a variable length packet header in URB packets mean
that we must memcpy the frame data out to our destination 'manually'.
This can result in data rates of up to 2 gigabits per second being
processed.
To improve efficiency, and maximise throughput, handle the URB decode
processing through a work queue to move it from interrupt context, and
allow multiple processors to work on URBs in parallel.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The streaming object is a key part of handling the UVC device. Although
not critical, we are currently missing a call to destroy the mutex on
clean up paths, and we are due to extend the objects complexity in the
near future.
Facilitate easy management of a stream object by creating a pair of
functions to handle creating and destroying the allocation. The new
uvc_stream_delete() function also performs the missing mutex_destroy()
operation.
Previously a failed streaming object allocation would cause
uvc_parse_streaming() to return -EINVAL, which is inappropriate. If the
constructor failes, we will instead return -ENOMEM.
While we're here, fix the trivial spelling error in the function banner
of uvc_delete().
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently, disconnecting a USB webcam while it is in use prints out a
number of warnings, such as:
WARNING: CPU: 2 PID: 3118 at /build/linux-ezBi1T/linux-4.8.0/fs/sysfs/group.c:237 sysfs_remove_group+0x8b/0x90
sysfs group ffffffffa7cd0780 not found for kobject 'event13'
This has been noticed before. [0]
This is because of the order in which things are torn down.
If there are no streams active during a USB disconnect:
- uvc_disconnect() is invoked via device_del() through the bus
notifier mechanism.
- this calls uvc_unregister_video().
- uvc_unregister_video() unregisters the video device for each
stream,
- because there are no streams open, it calls uvc_delete()
- uvc_delete() calls uvc_status_cleanup(), which cleans up the status
input device.
- uvc_delete() calls media_device_unregister(), which cleans up the
media device
- uvc_delete(), uvc_unregister_video() and uvc_disconnect() all
return, and we end up back in device_del().
- device_del() then cleans up the sysfs folder for the camera with
dpm_sysfs_remove(). Because uvc_status_cleanup() and
media_device_unregister() have already been called, this all works
nicely.
If, on the other hand, there *are* streams active during a USB disconnect:
- uvc_disconnect() is invoked
- this calls uvc_unregister_video()
- uvc_unregister_video() unregisters the video device for each
stream,
- uvc_unregister_video() and uvc_disconnect() return, and we end up
back in device_del().
- device_del() then cleans up the sysfs folder for the camera with
dpm_sysfs_remove(). Because the status input device and the media
device are children of the USB device, this also deletes their
sysfs folders.
- Sometime later, the final stream is closed, invoking uvc_release().
- uvc_release() calls uvc_delete()
- uvc_delete() calls uvc_status_cleanup(), which cleans up the status
input device. Because the sysfs directory has already been removed,
this causes a WARNing.
- uvc_delete() calls media_device_unregister(), which cleans up the
media device. Because the sysfs directory has already been removed,
this causes another WARNing.
To fix this, we need to make sure the devices are always unregistered
before the end of uvc_disconnect(). To this, move the unregistration
into the disconnect path:
- split uvc_status_cleanup() into two parts, one on disconnect that
unregisters and one on delete that frees.
- move v4l2_device_unregister() and media_device_unregister() into
the disconnect path.
[0]: https://lkml.org/lkml/2016/12/8/657
[Renamed uvc_input_cleanup() to uvc_input_unregister()]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
