Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
with SOF topology2 for IPC4, widgets might have mutliple queues they can be
connected.
The queues to use between components are descibed in the topology file.
This series adds widget queue support (specify which pin to connect) for
ipc4-topology with topology2.
Note: currently queue 0 of a widget is used as hardwired default.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently we set pipeline instance id = swidget->pipeline_id, but
pipeline_id is from topology and can be any number. In fact, the
number of pipelines is limited. This patch use ida to allocate pipeline
instance id and will be used for pipeline instance id in the IPC
message.
Currently we set pipeline instance id = swidget->pipeline_id, but
pipeline_id is from topology and can be any number. In fact, the
number of pipelines is limited. This patch use ida to allocate pipeline
instance id and will be used for pipeline instance id in the IPC
message.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221108002910.2819709-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_ipc4_widget_free_comp is dedicated to pipeline. Rename it
to sof_ipc4_widget_free_comp_pipeline.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221108002910.2819709-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During system suspend there is a chance that the running stream undergo
an xrun and instead of the expected SNDRV_PCM_TRIGGER_SUSPEND trigger
we will receive SNDRV_PCM_TRIGGER_STOP.
The handling of SUSPEND and STOP triggers differ that case of the later
the sof_pcm_stream_free() will be called with free_widget_list = false.
But we must make sure that all active widgets and streams are free before
entering suspend in order to be able to resume without error.
We can utilize the tear_down_all_pipelines to put the system to an expected
state and to fix the suspend/resume error.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221107084158.26629-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add get/put queue id helper to manage queue id in route
setup and route free.
The queue allocation rules are:
- If widget only has one sink/source pin, zero will be
returned as the queue ID directly.
- If widget has more than one sink/source pins, and pin
binding array is defined in topology, queue ID will be
allocated according to the pin binding array.
- If widget has more than one sink/sink pins, and pin
binding array is not defined, Linux ID allocation will be
used to allocate queue ID dynamically.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107085706.2550-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a simple helper to walk the loaded libraries and their modules to make
the ipc4-topology not aware of the underlying infrastructure and simplify
the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With IPC4 each DSP loadable binary is a library, which contains
ext_manifest section and loadable modules.
The basefw is no exception, it is always library 0 and it can contain
several modules, depending on the firmware build.
The current code assumes only one binary, which is the basefw and has no
concept of libraries.
This patch introduces the library+modules abstraction and represents the
basefw as library for the IPC4 loader codebase.
The basefw loading and handling is not changing, it is still done by the
generic code, but it's information is cloned under the library
representation.
The libraries are managed via XArray to offload the list and ID management.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocated ida needs to be freed up if the IPC message fails since
next time when we try again to set up the widget we are going to try to
allocate another ID and given enough tries, we are going to run out of
unique IDs.
Fixes: 711d0427c7 ("ASoC: SOF: ipc4-topology: move ida allocate/free to widget_setup/free")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220921112751.9253-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sof/ipc4-topology.c:1533:12: style: Variable 'pipeline' is
assigned a value that is never used. [unreadVariable]
pipeline = pipe_widget->private;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220920145405.2089147-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It should be size of the struct sof_ipc4_src, not data pointer pass to
sof_update_ipc_object().
Fixes: b85f4fc40d ("ASoC: SOF: add ipc4 SRC module support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220818081751.2407066-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the domain bit in ipc msg for module initialization is
set to lp (low power) mode for pipeline. This is not correct since
it is for module domain type: ll domain or dp domain which are for
scheduler in fw. If the domain bit is set to 1 fw will process the
module in dp domain or deal it with ll domain. So set domain bit
based on dp domain setting.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC module only needs two parameters : base module config
and sink rate. This patch adds prepare and setup for SRC
widgets.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code allocate/release instance_id in widget ipc_prepare/
ipc_unprepare callbacks and creating widget with the instance_id in
tplg widget_setup callback. In the case of multiple widgets connecting
to one widget, the ipc_unprepare will be invoked for all the widgets
in the path including the widget which is still in use.
As a result, the instance_id is released in the ipc_unprepare callback,
but the widget is still in use and the instance_id will be reused by
a new widget when we start the PCM again.
Moving the ida work from ipc_prepare/ipc_unprepare to widget_setup/free
can avoid such problem.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Free the memories allocated in sof_ipc4_get_audio_fmt in error handling
and ipc_free()
Fixes: 2cabd02b60 ("ASoC: SOF: ipc4-topology: Add support for parsing AIF_IN/AIF_OUT widgets")
Fixes: abfb536bd1 ("ASoC: SOF: ipc4-topology: Add support for parsing DAI_IN/DAI_OUT widgets")
Fixes: 4f838ab208 ("ASoC: SOF: ipc4-topology: Add support for parsing and preparing pga widgets")
Fixes: 4d4ba014ac ("ASoC: SOF: ipc4-topology: Add support for parsing mixer widgets")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200516.26853-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the swidget->private or dai->private to NULL after kfree in the error
handling in ipc_setup(). The private needs to be set NULL because if
ipc_setup() returns error, ipc_free() will be called later. ipc_free()
will judge the private is NULL or not to do the clearing.
For dai widget, dai->private is allocated and set in dai widget
ipc_setup(). So we need to check dai->private is NULL or not
in the ipc_free().
Fixes: 2cabd02b60 ("ASoC: SOF: ipc4-topology: Add support for parsing AIF_IN/AIF_OUT widgets")
Fixes: abfb536bd1 ("ASoC: SOF: ipc4-topology: Add support for parsing DAI_IN/DAI_OUT widgets")
Fixes: 4f838ab208 ("ASoC: SOF: ipc4-topology: Add support for parsing and preparing pga widgets")
Fixes: 4d4ba014ac ("ASoC: SOF: ipc4-topology: Add support for parsing mixer widgets")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200516.26853-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some SoundWire hardware topologies rely on different amplifiers or
capture devices connected on different links. These devices need to be
'aggregated', remain synchronized and be handled as a single logical
device.
In the IPC3 solution, the aggregation for amplifiers was handled by a
firmware 'demux' component. In the IPC4 solution, the demux component is
not needed, the gateway component can handle multiple ALH/DMA transfers
at the same time. This change makes the topology slightly more complicated
in that only one ALH DAI will be connected in the topology with the
gateway. The other DAIs that are part of the 'aggregated' dailink are not
shown in the DAPM graph as connected to the gateway, but they will however
be activated thanks to a feature in soc-dapm.c where events are forwarded
to all DAIs in the dailink (see soc_dapm_stream_event).
The topology also sets the same stream name for all widgets, dais and
dailinks, so a search for the stream name helps identify cases where
SoundWire/ALH aggregation is needed.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220614092630.20144-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IPC4 SoundWire blob. It includes a common IPC4 gateway and a multiple
ALH configuration struct which is used for storing the aggregated
SoundWire stream information.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-24-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the dai_get_clk_op for IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-23-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The copier config for SSP and DMIC type DAI copiers needs to be parsed
and matched with the runtime hw_config from the NHLT table. Along with
this, also add the change to set the node_id for these copier types.
Co-developed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-22-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new topology IPC op, parse_manifest. Define and set the op for
IPC4 and IPC4.
Co-developed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-21-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the dai_config op for IPC4.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the kcontrol IO ops for volume type controls for IPC4. Support
for other kcontrol types will be added later.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the control_setup op for IPC4 topology IPC ops to handle the
volume kcontrol types. Support for other kcontrol types will be added in
the follow up patches.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing and preparing mixer type widgets. Define the
token ID's and the associated token arrays needed to parse these
widgets.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20220609032643.916882-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing and preparing pga type widgets. Define the
token ID's and the associated token arrays needed to parse these
widgets.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20220609032643.916882-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the prepare op for the DAI type widgets for IPC4.
The prepare op is responsible for choosing the input/output audio
formats for these widgets based on the runtime PCM params, assigning the
instance ID and updating the total memory usage for the pipelines these
widgets belong to.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the prepare op for the AIF type widgets for IPC4.
The prepare op is responsible for choosing the input/output audio
formats for these widgets based on the runtime PCM params, assigning the
instance ID and updating the total memory usage for the pipelines these
widgets belong to.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing and setting up the IPC structure for
DAI_IN/DAI_OUT type widgets in IPC4.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing AIF_IN/AIF_OUT type widgets in IPC4. Add all the
new required token ID's for parsing these widgets to the list of tokens in
enum sof_tokens and the definitions of the token arrays corresponding to
each of the token ID's.
Also, upgrade the sof_widget_parse_tokens() function in the common
topology parser to be able to parse multiple sets of tokens for the
audio format and copier gateway config tokens.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20220609032643.916882-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce the topology ops for IPC4. Set the widget_ops and token_list
for parsing the scheduler type widget. Support for other widget types
will be added in the follow up patches.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20220609032643.916882-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
