x86 Xen-for-KVM:
* Allow the Xen runstate information to cross a page boundary
* Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
* add support for 32-bit guests in SCHEDOP_poll
x86 fixes:
* One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
* Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
* Clean up the MSR filter docs.
* Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
* Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
* Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
* Advertise (on AMD) that the SMM_CTL MSR is not supported
* Remove unnecessary exports
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
Documentation:
* Remove deleted ioctls from documentation
* Various fixes
An interesting feature of the Arm architecture is that the stage-1 MMU
supports two distinct VA regions, controlled by TTBR{0,1}_EL1. As KVM
selftests on arm64 only uses TTBR0_EL1, the VA space is constrained to
[0, 2^(va_bits-1)). This is different from other architectures that
allow for addressing low and high regions of the VA space from a single
page table.
KVM selftests' VA space allocator presumes the valid address range is
split between low and high memory based the MSB, which of course is a
poor match for arm64's TTBR0 region.
Allow architectures to override the default VA space layout. Make use of
the override to align vpages_valid with the behavior of TTBR0 on arm64.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221207214809.489070-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
-----BEGIN PGP SIGNATURE-----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=iIPT
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
Define and use kvm_static_assert() in the common KVM selftests headers to
provide deterministic behavior, and to allow creating static asserts
without dummy messages.
The kernel's static_assert() makes the message param optional, and on the
surface, tools/include/linux/build_bug.h appears to follow suit. However,
glibc may override static_assert() and redefine it as a direct alias of
_Static_assert(), which makes the message parameter mandatory. This leads
to non-deterministic behavior as KVM selftests code that utilizes
static_assert() without a custom message may or not compile depending on
the order of includes. E.g. recently added asserts in
x86_64/processor.h fail on some systems with errors like
In file included from lib/memstress.c:11:0:
include/x86_64/processor.h: In function ‘this_cpu_has_p’:
include/x86_64/processor.h:193:34: error: expected ‘,’ before ‘)’ token
static_assert(low_bit < high_bit); \
^
due to _Static_assert() expecting a comma before a message. The "message
optional" version of static_assert() uses macro magic to strip away the
comma when presented with empty an __VA_ARGS__
#ifndef static_assert
#define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
#define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
#endif // static_assert
and effectively generates "_Static_assert(expr, #expr)".
The incompatible version of static_assert() gets defined by this snippet
in /usr/include/assert.h:
#if defined __USE_ISOC11 && !defined __cplusplus
# undef static_assert
# define static_assert _Static_assert
#endif
which yields "_Static_assert(expr)" and thus fails as above.
KVM selftests don't actually care about using C11, but __USE_ISOC11 gets
defined because of _GNU_SOURCE, which many tests do #define. _GNU_SOURCE
triggers a massive pile of defines in /usr/include/features.h, including
_ISOC11_SOURCE:
/* If _GNU_SOURCE was defined by the user, turn on all the other features. */
#ifdef _GNU_SOURCE
# undef _ISOC95_SOURCE
# define _ISOC95_SOURCE 1
# undef _ISOC99_SOURCE
# define _ISOC99_SOURCE 1
# undef _ISOC11_SOURCE
# define _ISOC11_SOURCE 1
# undef _POSIX_SOURCE
# define _POSIX_SOURCE 1
# undef _POSIX_C_SOURCE
# define _POSIX_C_SOURCE 200809L
# undef _XOPEN_SOURCE
# define _XOPEN_SOURCE 700
# undef _XOPEN_SOURCE_EXTENDED
# define _XOPEN_SOURCE_EXTENDED 1
# undef _LARGEFILE64_SOURCE
# define _LARGEFILE64_SOURCE 1
# undef _DEFAULT_SOURCE
# define _DEFAULT_SOURCE 1
# undef _ATFILE_SOURCE
# define _ATFILE_SOURCE 1
#endif
which further down in /usr/include/features.h leads to:
/* This is to enable the ISO C11 extension. */
#if (defined _ISOC11_SOURCE \
|| (defined __STDC_VERSION__ && __STDC_VERSION__ >= 201112L))
# define __USE_ISOC11 1
#endif
To make matters worse, /usr/include/assert.h doesn't guard against
multiple inclusion by turning itself into a nop, but instead #undefs a
few macros and continues on. As a result, it's all but impossible to
ensure the "message optional" version of static_assert() will actually be
used, e.g. explicitly including assert.h and #undef'ing static_assert()
doesn't work as a later inclusion of assert.h will again redefine its
version.
#ifdef _ASSERT_H
# undef _ASSERT_H
# undef assert
# undef __ASSERT_VOID_CAST
# ifdef __USE_GNU
# undef assert_perror
# endif
#endif /* assert.h */
#define _ASSERT_H 1
#include <features.h>
Fixes: fcba483e82 ("KVM: selftests: Sanity check input to ioctls() at build time")
Fixes: ee37955366 ("KVM: selftests: Refactor X86_FEATURE_* framework to prep for X86_PROPERTY_*")
Fixes: 53a7dc0f21 ("KVM: selftests: Add X86_PROPERTY_* framework to retrieve CPUID values")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221122013309.1872347-1-seanjc@google.com
Currently, tests can only request a new vaddr range by using
vm_vaddr_alloc()/vm_vaddr_alloc_page()/vm_vaddr_alloc_pages() but
these functions allocate and map physical pages too. Make it possible
to request unmapped range too.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-36-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arch specific API kvm_arch_vm_post_create to perform any required setup
after VM creation.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20221115213845.3348210-4-vannapurve@google.com
[sean: place x86's implementation by vm_arch_vcpu_add()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Introduce arch specific API: kvm_selftest_arch_init to allow each arch to
handle initialization before running any selftest logic.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20221115213845.3348210-3-vannapurve@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix a mostly-theoretical bug where ARM's ucall MMIO setup could result in
different VMs stomping on each other by cloberring the global pointer.
Fix the most obvious issue by saving the MMIO gpa into the VM.
A more subtle bug is that creating VMs in parallel (on multiple tasks)
could result in a VM using the wrong address. Synchronizing a global to
a guest effectively snapshots the value on a per-VM basis, i.e. the
"global" is already prepped to work with multiple VMs, but setting the
global in the host is not thread-safe. To fix that bug, add
write_guest_global() to allow stuffing a VM's copy of a "global" without
modifying the host value.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-6-seanjc@google.com
Add a command line option, -c, to pin vCPUs to physical CPUs (pCPUs),
i.e. to force vCPUs to run on specific pCPUs.
Requirement to implement this feature came in discussion on the patch
"Make page tables for eager page splitting NUMA aware"
https://lore.kernel.org/lkml/YuhPT2drgqL+osLl@google.com/
This feature is useful as it provides a way to analyze performance based
on the vCPUs and dirty log worker locations, like on the different NUMA
nodes or on the same NUMA nodes.
To keep things simple, implementation is intentionally very limited,
either all of the vCPUs will be pinned followed by an optional main
thread or nothing will be pinned.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-8-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that kvm_vm allows specifying different memslots for code, page tables,
and data, use the appropriate memslot when making allocations in
common/libraty code. Change them accordingly:
- code (allocated by lib/elf) use the CODE memslot
- stacks, exception tables, and other core data pages (like the TSS in x86)
use the DATA memslot
- page tables and the PGD use the PT memslot
- test data (anything allocated with vm_vaddr_alloc()) uses the TEST_DATA
memslot
No functional change intended. All allocators keep using memslot #0.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-10-ricarkol@google.com
The vm_create() helpers are hardcoded to place most page types (code,
page-tables, stacks, etc) in the same memslot #0, and always backed with
anonymous 4K. There are a couple of issues with that. First, tests
willing to differ a bit, like placing page-tables in a different backing
source type must replicate much of what's already done by the vm_create()
functions. Second, the hardcoded assumption of memslot #0 holding most
things is spread everywhere; this makes it very hard to change.
Fix the above issues by having selftests specify how they want memory to be
laid out. Start by changing ____vm_create() to not create memslot #0; a
test (to come) will specify all memslots used by the VM. Then, add the
vm->memslots[] array to specify the right memslot for different memory
allocators, e.g.,: lib/elf should use the vm->[MEM_REGION_CODE] memslot.
This will be used as a way to specify the page-tables memslots (to be
backed by huge pages for example).
There is no functional change intended. The current commit lays out memory
exactly as before. A future commit will change the allocators to get the
region they should be using, e.g.,: like the page table allocators using
the pt memslot.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-8-ricarkol@google.com
Add the backing_src_type into struct userspace_mem_region. This struct
already stores a lot of info about memory regions, except the backing
source type. This info will be used by a future commit in order to
determine the method for punching a hole.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-7-ricarkol@google.com
Add helper functions for reading the value of kvm_intel and kvm_amd
boolean module parameters. Use the kvm_intel variant in
vm_is_unrestricted_guest() to simplify the check for
kvm_intel.unrestricted_guest.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220929181207.2281449-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cache a vCPU's CPUID information in "struct kvm_vcpu" to allow fixing the
mess where tests, often unknowingly, modify the global/static "cpuid"
allocated by kvm_get_supported_cpuid().
Add vcpu_init_cpuid() to handle stuffing an entirely different CPUID
model, e.g. during vCPU creation or when switching to the Hyper-V enabled
CPUID model. Automatically refresh the cache on vcpu_set_cpuid() so that
any adjustments made by KVM are always reflected in the cache. Drop
vcpu_get_cpuid() entirely to force tests to use the cache, and to allow
adding e.g. vcpu_get_cpuid_entry() in the future without creating a
conflicting set of APIs where vcpu_get_cpuid() does KVM_GET_CPUID2, but
vcpu_get_cpuid_entry() does not.
Opportunistically convert the VMX nested state test and KVM PV test to
manipulating the vCPU's CPUID (because it's easy), but use
vcpu_init_cpuid() for the Hyper-V features test and "emulator error" test
to effectively retain their current behavior as they're less trivial to
convert.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-19-seanjc@google.com
On x86-64, set KVM's supported CPUID as the vCPU's CPUID when recreating
a VM+vCPU to deduplicate code for state save/restore tests, and to
provide symmetry of sorts with respect to vm_create_with_one_vcpu(). The
extra KVM_SET_CPUID2 call is wasteful for Hyper-V, but ultimately is
nothing more than an expensive nop, and overriding the vCPU's CPUID with
the Hyper-V CPUID information is the only known scenario where a state
save/restore test wouldn't need/want the default CPUID.
Opportunistically use __weak for the default vm_compute_max_gfn(), it's
provided by tools' compiler.h.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-2-seanjc@google.com
In order to improve performance across multiple reads of VM stats, cache
the stats metadata in the VM struct.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument to the NX huge pages test to test disabling the feature
on a VM using the new capability.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-10-bgardon@google.com>
[Handle failure of sudo or setcap more gracefully. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's currently no test coverage of NX hugepages in KVM selftests, so
add a basic test to ensure that the feature works as intended.
The test creates a VM with a data slot backed with huge pages. The
memory in the data slot is filled with op-codes for the return
instruction. The guest then executes a series of accesses on the memory,
some reads, some instruction fetches. After each operation, the guest
exits and the test performs some checks on the backing page counts to
ensure that NX page splitting an reclaim work as expected.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats data to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
Also opportunistically remove an unnecessary calculation with
"size_data" in stats_test.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats descriptors to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats header to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the goofy static_assert on the size of the @vm/@vcpu parameters
with a call to a dummy helper, i.e. let the compiler naturally complain
about an incompatible type instead of homebrewing a poor replacement.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: fcba483e82 ("KVM: selftests: Sanity check input to ioctls() at build time")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a static assert to the KVM/VM/vCPU ioctl() helpers to verify that the
size of the argument provided matches the expected size of the IOCTL.
Because ioctl() ultimately takes a "void *", it's all too easy to pass in
garbage and not detect the error until runtime. E.g. while working on a
CPUID rework, selftests happily compiled when vcpu_set_cpuid()
unintentionally passed the cpuid() function as the parameter to ioctl()
(a local "cpuid" parameter was removed, but its use was not replaced with
"vcpu->cpuid" as intended).
Tweak a variety of benign issues that aren't compatible with the sanity
check, e.g. passing a non-pointer for ioctls().
Note, static_assert() requires a string on older versions of GCC. Feed
it an empty string to make the compiler happy.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_has_cap() to wrap kvm_check_cap() and return a bool for the use
cases where the caller only wants check if a capability is supported,
i.e. doesn't care about the value beyond whether or not it's non-zero.
The "check" terminology is somewhat ambiguous as the non-boolean return
suggests that '0' might mean "success", i.e. suggests that the ioctl uses
the 0/-errno pattern. Provide a wrapper instead of trying to find a new
name for the raw helper; the "check" terminology is derived from the name
of the ioctl, so using e.g. "get" isn't a clear win.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return an 'unsigned int' instead of a signed 'int' from kvm_check_cap(),
to make it more obvious that kvm_check_cap() can never return a negative
value due to its assertion that the return is ">= 0".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove DEFAULT_GUEST_PHY_PAGES and open code the magic number (with a
comment) in vm_nr_pages_required(). Exposing DEFAULT_GUEST_PHY_PAGES to
tests was a symptom of the VM creation APIs not cleanly supporting tests
that create runnable vCPUs, but can't do so immediately. Now that tests
don't have to manually compute the amount of memory needed for basic
operation, make it harder for tests to do things that should be handled
by the framework, i.e. force developers to improve the framework instead
of hacking around flaws in individual tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle all memslot0 size adjustments in __vm_create(). Currently, the
adjustments reside in __vm_create_with_vcpus(), which means tests that
call vm_create() or __vm_create() directly are left to their own devices.
Some tests just pass DEFAULT_GUEST_PHY_PAGES and don't bother with any
adjustments, while others mimic the per-vCPU calculations.
For vm_create(), and thus __vm_create(), take the number of vCPUs that
will be runnable to calculate that number of per-vCPU pages needed for
memslot0. To give readers a hint that neither vm_create() nor
__vm_create() create vCPUs, name the parameter @nr_runnable_vcpus instead
of @nr_vcpus. That also gives readers a hint as to why tests that create
larger numbers of vCPUs but never actually run those vCPUs can skip
straight to the vm_create_barebones() variant.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @num_percpu_pages from __vm_create_with_vcpus(), all callers pass
'0' and there's unlikely to be a test that allocates just enough memory
that it needs a per-CPU allocation, but not so much that it won't just do
its own memory management.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All callers of __vm_create_with_vcpus() pass DEFAULT_GUEST_PHY_PAGES for
@slot_mem_pages; drop the param and just hardcode the "default" as the
base number of pages for slot0.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop a variety of 'struct kvm_vm' accessors that wrap a single variable
now that tests can simply reference the variable directly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_state() now that all tests reference vcpu->run directly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_get() and rename vcpu_find() to vcpu_exists() to make it that
much harder for a test to give meaning to a vCPU ID. I.e. force tests to
capture a vCPU when the vCPU is created.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers
and ioctls.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the @vcpuids parameter from VM creators now that there are no users.
Allowing tests to specify IDs was a gigantic mistake as it resulted in
tests with arbitrary and ultimately meaningless IDs that differed only
because the author used test X intead of test Y as the source for
copy+paste (the de facto standard way to create a KVM selftest).
Except for literally two tests, x86's set_boot_cpu_id and s390's resets,
tests do not and should not care about the vCPU ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop all vm_create_default*() helpers, the "default" naming turned out to
terrible as wasn't extensible (hard to have multiple defaults), was a lie
(half the settings were default, half weren't), and failed to capture
relationships between helpers, e.g. compared with the kernel's standard
underscores pattern.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework vcpu_{g,s}et_reg() to provide the APIs that tests actually want to
use, and drop the three "one-off" implementations that cropped up due to
the poor API.
Ignore the handful of direct KVM_{G,S}ET_ONE_REG calls that don't fit the
APIs for one reason or another.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VM creator that "returns" the created vCPUs by filling the provided
array. This will allow converting multi-vCPU tests away from hardcoded
vCPU IDs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_vcpu_add() to __vm_vcpu_add(), and vm_vcpu_add_default() to
vm_vcpu_add() to show the relationship between the newly minted
vm_vcpu_add() and __vm_vcpu_add().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the created 'struct kvm_vcpu' object from vm_vcpu_add_default(),
which cleans up a few tests and will eventually allow removing vcpu_get()
entirely.
Opportunistically rename @vcpuid to @vcpu_id to follow preferred kernel
style.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "arch" into the name of utility functions that are declared in common
code, but (surprise!) have arch-specific implementations. Shuffle code
around so that all such helpers' declarations are bundled together.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An "unrestricted guest" is an VMX-only concept, move the relevant helper
to x86-64 code. Assume most readers can correctly convert underscores to
spaces and oppurtunistically trim the function comment.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declaration of guest_get_vcpuid() to include/aarch64/processor.h,
it is implemented and used only by arm64.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the created vCPU from vm_vcpu_add() so that callers don't need to
manually retrieve the vCPU that was just added. Opportunistically drop
the "heavy" function comment, it adds a lot of lines of "code" but not
much value, e.g. it's pretty obvious that @vm is a virtual machine...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename 'struct vcpu' to 'struct kvm_vcpu' to align with 'struct kvm_vm'
in the selftest, and to give readers a hint that the struct is specific
to KVM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the "state" field of 'struct vcpu' to "run". KVM calls it "run",
the struct name is "kvm_run", etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ____vm_create() to be the innermost helper, and turn vm_create() into
a wrapper the specifies VM_MODE_DEFAULT. Most of the vm_create() callers
just want the default mode, or more accurately, don't care about the mode.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_create_without_vcpus() to vm_create() so that it's not
misconstrued as helper that creates a VM that can never have vCPUs, as
opposed to a helper that "just" creates a VM without vCPUs added at time
zero.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_create() to vm_create_barebones() and drop the @phys_pages
param. Pass '0' for the number of pages even though some callers pass
'DEFAULT_GUEST_PHY_PAGES', as the intent behind creating truly barebones
VMs is purely to create a VM, i.e. there aren't vCPUs, there's no guest
code loaded, etc..., and so there is nothing that will ever need or
consume guest memory.
Freeing up the name vm_create() will allow using the name for an inner
helper to the other VM creators, which need a "full" VM.
Opportunisticaly rewrite the function comment for addr_gpa2alias() to
focus on what the _function_ does, not what its _sole caller_ does.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add VM creation helpers to expose/return 'struct vcpu' so that tests
don't have to hardcode a VCPU_ID or make assumptions about what vCPU ID
is used by the framework just to retrieve a vCPU the test created.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the get/set part of the MP_STATE and GUEST_DEBUG helpers to the end
to align with the many other ioctl() wrappers/helpers. Note, this is not
an endorsement of the predominant style, the goal is purely to provide
consistency in the selftests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
