And bump the version to 0x2A.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VR0 Hot support for SMU 13.0.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[v2]
simplified fix after Lijo's feedback
removed clocks.num_levels from calculation of loop count
removed unsafe accesses to shim table freq_values
retained corner case output only min,now if
clocks.num_levels == 1 && now > min
[v1]
added a check to populate and use SCLK shim table freq_values only
if using dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL or
AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM
removed clocks.num_levels from calculation of shim table size
removed unsafe accesses to shim table freq_values
output gfx_table values if using other dpm levels
added check for freq_match when using freq_values for when now == min_clk
== Test ==
LOGFILE=aldebaran-sclk.test.log
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
lspci -nn | grep "VGA\|Display" > $LOGFILE
FILES="pp_od_clk_voltage
pp_dpm_sclk"
for f in $FILES
do
echo === $f === >> $LOGFILE
cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[v2]
No Changes, added RB
[v1]
Size of pp_clock_levels_with_latency is PP_MAX_CLOCK_LEVELS, not MAX_NUM_CLOCKS.
Both are currently defined as 16, modifying in case one value is modified in future
Changed code in both arcturus and aldabaran.
Also removed unneeded var count, and used min_t function
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some APUs with SMU13 are showing the following message:
`amdgpu 0000:63:00.0: amdgpu: Unexpected and unhandled version: 3.1`
This warning isn't relevant for smu info 3.1, as no bootup information
is present in the table.
Fixes: 593a54f180 ("drm/amd/pm: correct the way for retrieving bootup clocks")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set mp1 unload state will cause the SMC FW can't accept any SMU message,
skip to set mp1 unload state to avoid following case fail:
- runtime pm case.
- gpu reset case.
Fixes: 72aeb6ee0c ("drm/amd/pm: fix driver reload SMC firmware fail issue for smu13")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The EccInfo_t struct in driver_if.h is as below in official release
verion 68.55.0
typedef struct {
uint64_t mca_umc_status;
uint64_t mca_umc_addr;
uint16_t ce_count_lo_chip;
uint16_t ce_count_hi_chip;
uint32_t eccPadding;
uint64_t mca_ceumc_addr;
} EccInfo_t;
It's different from the debug version druing develop print correctable
error address, so adjust EccInfo_t struct.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable BAMACO reset support for SMU 13.0.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The feature is ready with latest PMFW and IFWI.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The EnableGfxImu message will be issued in the set_gfx_power_up_by_imu.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SMU IP v13.0.4, the smnMP1_FIRMWARE_FLAGS address is different,
we need this to correct the reading address.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue calltrace:
[ 402.773695] [drm] failed to load ucode SMC(0x2C)
[ 402.773754] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0x0)
[ 402.773762] [drm:psp_load_smu_fw [amdgpu]] *ERROR* PSP load smu failed!
[ 402.966758] [drm:psp_v13_0_ring_destroy [amdgpu]] *ERROR* Fail to stop psp ring
[ 402.966949] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[ 402.967116] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
[ 402.967252] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_init failed
[ 402.967255] amdgpu 0000:03:00.0: amdgpu: Fatal error during GPU init
if not reset mp1 state during kernel driver unload, it will cause psp
load pmfw fail at the second time.
add PPSMC_MSG_PrepareMp1ForUnload support for smu_v13_0_0/smu_v13_0_7
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support BAMACO reset on smu_v13_0_7, take BAMACO as a subset of BACO
for the low latency, and it only happens on specific platforms.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable gfxoff on smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the driver if header for smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable BACO on smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add interface to deallocate power_context for smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW will handle that properly. Driver involvement may cause some
unexpected issues.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop those redundant declarations in smu_v13_0.h.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fulfill the interfaces for mode1 reset related.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop extra CMN2ASIC_MAPPING_FEATURE transform. Also some cosmetic
fixes for better readability.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As there is actually no direct dependence between them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new 78.40.0 PMFW has this feature supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the per asic offsets so the we don't have to have
asic specific logic in the common code.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can eventaully use them in the common smu code for
accessing the SMU mailboxes without needing a lot of
per asic logic in the common code.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC v11_0_1 asic needs to issue the EnableGfxImu message after start IMU.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU add a new variable mca_ceumc_addr to record
umc correctable error address in EccInfo table,
driver side add EccInfo_V2_t to support this feature
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The feature is ready with latest 78.39.0 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit the latest 78.39.0 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is some problem with average frequency reading. Thus, we
switch to the target frequency reading instead.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suppress the following compile warnings:
>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v11_0_pptable.h:163:17:
warning: field smc_pptable within 'struct smu_11_0_powerplay_table' is
less aligned than 'PPTable_t' and is usually due to 'struct smu_11_0_powerplay_table'
being packed, which can lead to unaligned accesses [-Wunaligned-access]
PPTable_t smc_pptable; //PPTable_t in smu11_driver_if.h
^
1 warning generated.
--
>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v11_0_7_pptable.h:193:17:
warning: field smc_pptable within 'struct smu_11_0_7_powerplay_table' is
less aligned than 'PPTable_t' and is usually due to 'struct smu_11_0_7_powerplay_table'
being packed, which can lead to unaligned accesses [-Wunaligned-access]
PPTable_t smc_pptable; //PPTable_t in smu11_driver_if.h
^
1 warning generated.
--
>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v13_0_pptable.h:161:12:
warning: field smc_pptable within 'struct smu_13_0_powerplay_table' is less aligned than
'PPTable_t' and is usually due to 'struct smu_13_0_powerplay_table' being packed, which
can lead to unaligned accesses [-Wunaligned-access]
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When powerplay is not enabled, return AUTO as default level.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the metrics version used for SMU 11.0.11/12/13.
Fixes misreported GPU metrics (e.g., fan speed, etc.) depending
on which version of SMU firmware is loaded.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1925
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On aldebaran, when thermal throttling happens due to excessive GPU
temperature, the reason for throttling event is missed in warning
message. This patch fixes it.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to check if "clock_ranges' is non-NULL. It is checked
already on the line before.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the latest vbios, the memory temp reading is working.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable OOB Monitor and SOC CG which are ready since 78.38.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To better match with the pptable_id settings from VBIOS.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To align with 78.37.0 and later PMFWs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since PMFW will handle this properly. Driver involvement is
unnecessary.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable MP0CLK DPM and FW Dstate since they are already supported
by latest 78.36.0 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gpu_metrics_table is allocated in yellow_carp_init_smc_tables() but
not freed in yellow_carp_fini_smc_tables().
Signed-off-by: Gong Yuanjun <ruc_gongyuanjun@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
create smartshift sysfs attributes from dGPU device even
on smartshift 1.0 platform to be consistent. Do not populate
the attributes on platforms that have APU only but not dGPU
or vice versa.
V2:
avoid checking for the number of VGA/DISPLAY devices (Lijo)
move code to read from dGPU or APU into a function and reuse (Lijo)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the SMU IP v13.0.4 GFXOFF control
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
