The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.
The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.
However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:
15: 0f 90 c0 seto %al
18: c3 ret
19: cc int3
1a: 0f 1f 00 nopl (%rax)
1d: 0f 91 c0 setno %al
20: c3 ret
21: cc int3
22: 0f 1f 00 nopl (%rax)
25: 0f 92 c0 setb %al
28: c3 ret
29: cc int3
and this explodes like this:
int3: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 2435 Comm: qemu-system-x86 Not tainted 5.17.0-rc8-sls #1
Hardware name: Dell Inc. Precision WorkStation T3400 /0TP412, BIOS A14 04/30/2012
RIP: 0010:setc+0x5/0x8 [kvm]
Code: 00 00 0f 1f 00 0f b6 05 43 24 06 00 c3 cc 0f 1f 80 00 00 00 00 0f 90 c0 c3 cc 0f \
1f 00 0f 91 c0 c3 cc 0f 1f 00 0f 92 c0 c3 cc <0f> 1f 00 0f 93 c0 c3 cc 0f 1f 00 \
0f 94 c0 c3 cc 0f 1f 00 0f 95 c0
Call Trace:
<TASK>
? x86_emulate_insn [kvm]
? x86_emulate_instruction [kvm]
? vmx_handle_exit [kvm_intel]
? kvm_arch_vcpu_ioctl_run [kvm]
? kvm_vcpu_ioctl [kvm]
? __x64_sys_ioctl
? do_syscall_64
? entry_SYSCALL_64_after_hwframe
</TASK>
Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.
Fixes: e463a09af2 ("x86: Add straight-line-speculation mitigation")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net
[Add a comment and a bit of safety checking, since this is going to be changed
again for IBT support. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Outer-privilege level return is not implemented in emulator,
move the unhandled logic into __load_segment_descriptor to
make it easier to understand why the checks for RET are
incomplete.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <5b7188e6388ac9f4567d14eab32db9adf3e00119.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Code segment descriptor can be loaded by jmp/call/ret, iret
and int. The privilege checks are different between those
instructions above realmode. Although, the emulator has
use x86_transfer_type enumerate to differentiate them, but
it is not really used in __load_segment_descriptor(). Note,
far jump/call to call gate, task gate or task state segment
are not implemented in emulator.
As for far jump/call to code segment, if DPL > CPL for conforming
code or (RPL > CPL or DPL != CPL) for non-conforming code, it
should trigger #GP. The current checks are ok.
As for far return, if RPL < CPL or DPL > RPL for conforming
code or DPL != RPL for non-conforming code, it should trigger #GP.
Outer level return is not implemented above virtual-8086 mode in
emulator. So it implies that RPL <= CPL, but the current checks
wouldn't trigger #GP if RPL < CPL.
As for code segment loading in task switch, if DPL > RPL for conforming
code or DPL != RPL for non-conforming code, it should trigger #TS. Since
segment selector is loaded before segment descriptor when load state from
tss, it implies that RPL = CPL, so the current checks are ok.
The only problem in current implementation is missing RPL < CPL check for
far return. However, change code to follow the manual is better.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <e01f5ea70fc1f18f23da1182acdbc5c97c0e5886.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per Intel's SDM on the "Instruction Set Reference", when
loading segment descriptor, not-present segment check should
be after all type and privilege checks. But the emulator checks
it first, then #NP is triggered instead of #GP if privilege fails
and segment is not present. Put not-present segment check after
type and privilege checks in __load_segment_descriptor().
Fixes: 38ba30ba51 (KVM: x86 emulator: Emulate task switch in emulator.c)
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly zero select fields in the emulator's decode cache instead of
zeroing the fields via a gross memset() that spans six fields. gcc and
clang are both clever enough to batch the first five fields into a single
quadword MOV, i.e. memset() and individually zeroing generate identical
code.
Removing the wart also prepares KVM for FORTIFY_SOURCE performing
compile-time and run-time field bounds checking for memset().
No functional change intended.
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/lkml/YR0jIEzEcUom/7rd@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
The "u16 tss_selector" parameter of task_switch_{16, 32}()
is not used, so remove it. No functional change intended.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220125095909.38122-16-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "struct x86_emulate_ctxt *ctxt" parameter of setup_syscalls_segments()
is not used, so remove it. No functional change intended.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220125095909.38122-15-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHhxvsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPZkAf+Nz92UL/5nNGcdHtE4m7AToMmitE9
bYkesf9BMQvAe5wjkABLuoHGi6ay4jabo4fiGzbdkiK7lO5YgfsWiMB3/MT5fl4E
jRPzaVQabp3YZLM8UYCBmfUVuRj524S967SfSRe0AvYjDEH8y7klPf4+7sCsFT0/
Px9Vf2KGuOlf0eM78yKg4rGaF0jS22eLgXm6FfNMY8/e29ZAo/jyUmqBY+Z2xxZG
aWhceDtSheW1jwLHLj3nOlQJvHTn8LVGXBE/R8Gda3ZjrBV2rKaDi4Fh+HD+dz86
2zVXwzQ7uck2CMW73GMoXMTWoKSHMyvlBOs1BdvBm4UsnGcXR+q8IFCeuQ==
=s73m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
When KVM retires a guest branch instruction through emulation,
increment any vPMCs that are configured to monitor "branch
instructions retired," and update the sample period of those counters
so that they will overflow at the right time.
Signed-off-by: Eric Hankland <ehankland@google.com>
[jmattson:
- Split the code to increment "branch instructions retired" into a
separate commit.
- Moved/consolidated the calls to kvm_pmu_trigger_event() in the
emulation of VMLAUNCH/VMRESUME to accommodate the evolution of
that code.
]
Fixes: f5132b0138 ("KVM: Expose a version 2 architectural PMU to a guests")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20211130074221.93635-7-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM instruction emulation has a gnarly hack where the .fixup does a
return, however there's already a ret right after the 10b label, so
mark that as 11 and have the exception clear %esi to remove the
.fixup.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.722157053@infradead.org
Replace all ret/retq instructions with ASM_RET in preparation of
making it more than a single instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.964635458@infradead.org
- More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
-----BEGIN PGP SIGNATURE-----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=qBAO
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
SDM mentioned that, RDPMC:
IF (((CR4.PCE = 1) or (CPL = 0) or (CR0.PE = 0)) and (ECX indicates a supported counter))
THEN
EAX := counter[31:0];
EDX := ZeroExtend(counter[MSCB:32]);
ELSE (* ECX is not valid or CR4.PCE is 0 and CPL is 1, 2, or 3 and CR0.PE is 1 *)
#GP(0);
FI;
Let's add a comment why CR0.PE isn't tested since it's impossible for CPL to be >0 if
CR0.PE=0.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1634724836-73721-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recent change to make objtool aware of more symbol relocation types
(commit 24ff652573: "objtool: Teach get_alt_entry() about more
relocation types") also added another check, and resulted in this
objtool warning when building kvm on x86:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
The reason seems to be that kvm_fastop_exception() is marked as a global
symbol, which causes the relocation to ke kept around for objtool. And
at the same time, the kvm_fastop_exception definition (which is done as
an inline asm statement) doesn't actually set the type of the global,
which then makes objtool unhappy.
The minimal fix is to just not mark kvm_fastop_exception as being a
global symbol. It's only used in that one compilation unit anyway, so
it was always pointless. That's how all the other local exception table
labels are done.
I'm not entirely happy about the kinds of games that the kvm code plays
with doing its own exception handling, and the fact that it confused
objtool is most definitely a symptom of the code being a bit too subtle
and ad-hoc. But at least this trivial one-liner makes objtool no longer
upset about what is going on.
Fixes: 24ff652573 ("objtool: Teach get_alt_entry() about more relocation types")
Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to Intel's SDM Vol2 and AMD's APM Vol3, when
CR4.TSD is set, use rdtsc/rdtscp instruction above privilege
level 0 should trigger a #GP.
Fixes: d7eb820306 ("KVM: SVM: Add intercept checks for remaining group7 instructions")
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <1297c0dd3f1bb47a6d089f850b629c7aa0247040.1629257115.git.houwenlong93@linux.alibaba.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that .post_leave_smm() is gone, drop "pre_" from the remaining
helpers. The helpers aren't invoked purely before SMI/RSM processing,
e.g. both helpers are invoked after state is snapshotted (from regs or
SMRAM), and the RSM helper is invoked after some amount of register state
has been stuffed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the .post_leave_smm() emulator callback, which at this point is just
a wrapper to kvm_mmu_reset_context(). The manual context reset is
unnecessary, because unlike enter_smm() which calls vendor MSR/CR helpers
directly, em_rsm() bounces through the KVM helpers, e.g. kvm_set_cr4(),
which are responsible for processing side effects. em_rsm() is already
subtly relying on this behavior as it doesn't manually do
kvm_update_cpuid_runtime(), e.g. to recognize CR4.OSXSAVE changes.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the .set_hflags() emulator hook with a dedicated .exiting_smm(),
moving the SMM and SMM_INSIDE_NMI flag handling out of the emulator in
the process. This is a step towards consolidating much of the logic in
kvm_smm_changed(), including the SMM hflags updates.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced KVM_REQ_TRIPLE_FAULT to properly emulate
shutdown if RSM from SMM fails.
Note, entering shutdown after clearing the SMM flag and restoring NMI
blocking is architecturally correct with respect to AMD's APM, which KVM
also uses for SMRAM layout and RSM NMI blocking behavior. The APM says:
An RSM causes a processor shutdown if an invalid-state condition is
found in the SMRAM state-save area. Only an external reset, external
processor-initialization, or non-maskable external interrupt (NMI) can
cause the processor to leave the shutdown state.
Of note is processor-initialization (INIT) as a valid shutdown wake
event, as INIT is blocked by SMM, implying that entering shutdown also
forces the CPU out of SMM.
For recent Intel CPUs, restoring NMI blocking is technically wrong, but
so is restoring NMI blocking in the first place, and Intel's RSM
"architecture" is such a mess that just about anything is allowed and can
be justified as micro-architectural behavior.
Per the SDM:
On Pentium 4 and later processors, shutdown will inhibit INTR and A20M
but will not change any of the other inhibits. On these processors,
NMIs will be inhibited if no action is taken in the SMI handler to
uninhibit them (see Section 34.8).
where Section 34.8 says:
When the processor enters SMM while executing an NMI handler, the
processor saves the SMRAM state save map but does not save the
attribute to keep NMI interrupts disabled. Potentially, an NMI could be
latched (while in SMM or upon exit) and serviced upon exit of SMM even
though the previous NMI handler has still not completed.
I.e. RSM unconditionally unblocks NMI, but shutdown on RSM does not,
which is in direct contradiction of KVM's behavior. But, as mentioned
above, KVM follows AMD architecture and restores NMI blocking on RSM, so
that micro-architectural detail is already lost.
And for Pentium era CPUs, SMI# can break shutdown, meaning that at least
some Intel CPUs fully leave SMM when entering shutdown:
In the shutdown state, Intel processors stop executing instructions
until a RESET#, INIT# or NMI# is asserted. While Pentium family
processors recognize the SMI# signal in shutdown state, P6 family and
Intel486 processors do not.
In other words, the fact that Intel CPUs have implemented the two
extremes gives KVM carte blanche when it comes to honoring Intel's
architecture for handling shutdown during RSM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-3-seanjc@google.com>
[Return X86EMUL_CONTINUE after triple fault. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-v XMM fast hypercalls use XMM registers to pass input/output
parameters. To access these, hyperv.c can reuse some FPU register
accessors defined in emulator.c. Move them to a common location so both
can access them.
While at it, reorder the parameters of these accessor methods to make
them more readable.
Cc: Alexander Graf <graf@amazon.com>
Cc: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <01a85a6560714d4d3637d3d86e5eba65073318fa.1622019133.git.sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ctxt->ud is consumed only by x86_decode_insn(), we can kill it off by
passing emulation_type to x86_decode_insn() and dropping ctxt->ud
altogether. Tracking that info in ctxt for literally one call is silly.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <1622160097-37633-2-git-send-email-wanpengli@tencent.com>
Add a dedicated intercept enum for RDPID instead of piggybacking RDTSCP.
Unlike VMX's ENABLE_RDTSCP, RDPID is not bound to SVM's RDTSCP intercept.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-5-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
Remove the emulator's checks for illegal CR0, CR3, and CR4 values, as
the checks are redundant, outdated, and in the case of SEV's C-bit,
broken. The emulator manually calculates MAXPHYADDR from CPUID and
neglects to mask off the C-bit. For all other checks, kvm_set_cr*() are
a superset of the emulator checks, e.g. see CR4.LA57.
Fixes: a780a3ea62 ("KVM: X86: Fix reserved bits check for MOV to CR3")
Cc: Babu Moger <babu.moger@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-2-seanjc@google.com>
Cc: stable@vger.kernel.org
[Unify check_cr_read and check_cr_write. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix ~144 single-word typos in arch/x86/ code comments.
Doing this in a single commit should reduce the churn.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
Restore the full 64-bit values of DR6 and DR7 when emulating RSM on
x86-64, as defined by both Intel's SDM and AMD's APM.
Note, bits 63:32 of DR6 and DR7 are reserved, so this is a glorified nop
unless the SMM handler is poking into SMRAM, which it most definitely
shouldn't be doing since both Intel and AMD list the DR6 and DR7 fields
as read-only.
Fixes: 660a5d517a ("KVM: x86: save/load state on SMM switch")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205012458.3872687-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the DR6/7 volatile+fixed bits adjustments in RSM emulation, which
are redundant and misleading. The necessary adjustments are made by
kvm_set_dr(), which properly sets the fixed bits that are conditional
on the vCPU model.
Note, KVM incorrectly reads only bits 31:0 of the DR6/7 fields when
emulating RSM on x86-64. On the plus side for this change, that bug
makes removing "& DRx_VOLATILE" a nop.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205012458.3872687-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DR6_INIT contains the 1-reserved bits as well as the bit that is cleared
to 0 when the condition (e.g. RTM) happens. The value can be used to
initialize dr6 and also be the XOR mask between the #DB exit
qualification (or payload) and DR6.
Concerning that DR6_INIT is used as initial value only once, rename it
to DR6_ACTIVE_LOW and apply it in other places, which would make the
incoming changes for bus lock debug exception more simple.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210202090433.13441-2-chenyi.qiang@intel.com>
[Define DR6_FIXED_1 from DR6_ACTIVE_LOW and DR6_VOLATILE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set the emulator context to PROT64 if SYSENTER transitions from 32-bit
userspace (compat mode) to a 64-bit kernel, otherwise the RIP update at
the end of x86_emulate_insn() will incorrectly truncate the new RIP.
Note, this bug is mostly limited to running an Intel virtual CPU model on
an AMD physical CPU, as other combinations of virtual and physical CPUs
do not trigger full emulation. On Intel CPUs, SYSENTER in compatibility
mode is legal, and unconditionally transitions to 64-bit mode. On AMD
CPUs, SYSENTER is illegal in compatibility mode and #UDs. If the vCPU is
AMD, KVM injects a #UD on SYSENTER in compat mode. If the pCPU is Intel,
SYSENTER will execute natively and not trigger #UD->VM-Exit (ignoring
guest TLB shenanigans).
Fixes: fede8076aa ("KVM: x86: handle wrap around 32-bit address space")
Cc: stable@vger.kernel.org
Signed-off-by: Jonny Barker <jonny@jonnybarker.com>
[sean: wrote changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210202165546.2390296-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The instruction emulator ignores clflush instructions, yet fails to
support clflushopt. Treat both similarly.
Fixes: 13e457e0ee ("KVM: x86: Emulator does not decode clflush well")
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20201103120400.240882-1-david.edmondson@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will allow the KVM to report such errors (e.g -ENOMEM)
to the userspace.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSRs are weird. Some of them are normal control registers, such as EFER.
Some however are registers that really are model specific, not very
interesting to virtualization workloads, and not performance critical.
Others again are really just windows into package configuration.
Out of these MSRs, only the first category is necessary to implement in
kernel space. Rarely accessed MSRs, MSRs that should be fine tunes against
certain CPU models and MSRs that contain information on the package level
are much better suited for user space to process. However, over time we have
accumulated a lot of MSRs that are not the first category, but still handled
by in-kernel KVM code.
This patch adds a generic interface to handle WRMSR and RDMSR from user
space. With this, any future MSR that is part of the latter categories can
be handled in user space.
Furthermore, it allows us to replace the existing "ignore_msrs" logic with
something that applies per-VM rather than on the full system. That way you
can run productive VMs in parallel to experimental ones where you don't care
about proper MSR handling.
Signed-off-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200925143422.21718-3-graf@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per Intel's SDM, RDPID takes a #UD if it is unsupported, which is more or
less what KVM is emulating when MSR_TSC_AUX is not available. In fact,
there are no scenarios in which RDPID is supposed to #GP.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1598581422-76264-1-git-send-email-robert.hu@linux.intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't ignore return values in rsm_load_state_64/32 to avoid
loading invalid state from SMM state area if it was tampered with
by the guest.
This is primarly intended to avoid letting guest set bits in EFER
(like EFER.SVME when nesting is disabled) by manipulating SMM save area.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instructions starting with 0f18 up to 0f1f are reserved nops, except those
that were assigned to MPX. These include the endbr markers used by CET.
List them correctly in the opcode table.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM is not handling the case where EIP wraps around the 32-bit address
space (that is, outside long mode). This is needed both in vmx.c
and in emulate.c. SVM with NRIPS is okay, but it can still print
an error to dmesg due to integer overflow.
Reported-by: Nick Peterson <everdox@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
Invert and rename the kvm_cpuid() param that controls out-of-range logic
to better reflect the semantics of the affected callers, i.e. callers
that bypass the out-of-range logic do so because they are looking up an
exact guest CPUID entry, e.g. to query the maxphyaddr.
Similarly, rename kvm_cpuid()'s internal "found" to "exact" to clarify
that it tracks whether or not the exact requested leaf was found, as
opposed to any usable leaf being found.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to provide CPUID-based guest vendor checks, i.e. to do the
ugly register comparisons. Use the new helpers to check for an AMD
guest vendor in guest_cpuid_is_amd() as well as in the existing emulator
flows.
Using the new helpers fixes a _very_ theoretical bug where
guest_cpuid_is_amd() would get a false positive on a non-AMD virtual CPU
with a vendor string beginning with "Auth" due to the previous logic
only checking EBX. It also fixes a marginally less theoretically bug
where guest_cpuid_is_amd() would incorrectly return false for a guest
CPU with "AMDisbetter!" as its vendor string.
Fixes: a0c0feb579 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the emulation context is dynamically allocated and not embedded
in struct kvm_vcpu, move its header, kvm_emulate.h, out of the public
asm directory and into KVM's private x86 directory.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move ctxt_virt_addr_bits() and emul_is_noncanonical_address() from x86.h
to emulate.c. This eliminates all references to struct x86_emulate_ctxt
from x86.h, and sets the stage for a future patch to stop including
kvm_emulate.h in asm/kvm_host.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit 07721feee4 ("KVM: nVMX: Don't emulate instructions in guest
mode") Hyper-V guests on KVM stopped booting with:
kvm_nested_vmexit: rip fffff802987d6169 reason EPT_VIOLATION info1 181
info2 0 int_info 0 int_info_err 0
kvm_page_fault: address febd0000 error_code 181
kvm_emulate_insn: 0:fffff802987d6169: f3 a5
kvm_emulate_insn: 0:fffff802987d6169: f3 a5 FAIL
kvm_inj_exception: #UD (0x0)
"f3 a5" is a "rep movsw" instruction, which should not be intercepted
at all. Commit c44b4c6ab8 ("KVM: emulate: clean up initializations in
init_decode_cache") reduced the number of fields cleared by
init_decode_cache() claiming that they are being cleared elsewhere,
'intercept', however, is left uncleared if the instruction does not have
any of the "slow path" flags (NotImpl, Stack, Op3264, Sse, Mmx, CheckPerm,
NearBranch, No16 and of course Intercept itself).
Fixes: c44b4c6ab8 ("KVM: emulate: clean up initializations in init_decode_cache")
Fixes: 07721feee4 ("KVM: nVMX: Don't emulate instructions in guest mode")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
arch/x86/kvm/emulate.c: In function 'x86_emulate_insn':
arch/x86/kvm/emulate.c:5686:22: error: cast between incompatible
function types from 'int (*)(struct x86_emulate_ctxt *)' to 'void
(*)(struct fastop *)' [-Werror=cast-function-type]
rc = fastop(ctxt, (fastop_t)ctxt->execute);
Fix it by using an unnamed union of a (*execute) function pointer and a
(*fastop) function pointer.
Fixes: 3009afc6e3 ("KVM: x86: Use a typedef for fastop functions")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a typedef to for the fastop function prototype to make the code more
readable.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It also helps eliminate some duplicated code.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove an unused struct x86_emulate_ctxt * param from low level helpers
used to access guest FPU state. The unused param was left behind by
commit 6ab0b9feb8 ("x86,kvm: remove KVM emulator get_fpu / put_fpu").
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
