Replace the per-vendor hack-a-fix for KVM's #PF => #PF => #DF workaround
with an explicit, common workaround in kvm_inject_emulated_page_fault().
Aside from being a hack, the current approach is brittle and incomplete,
e.g. nSVM's KVM_SET_NESTED_STATE fails to set ->inject_page_fault(),
and nVMX fails to apply the workaround when VMX is intercepting #PF due
to allow_smaller_maxphyaddr=1.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove WARNs that sanity check that KVM never lets a triple fault for L2
escape and incorrectly end up in L1. In normal operation, the sanity
check is perfectly valid, but it incorrectly assumes that it's impossible
for userspace to induce KVM_REQ_TRIPLE_FAULT without bouncing through
KVM_RUN (which guarantees kvm_check_nested_state() will see and handle
the triple fault).
The WARN can currently be triggered if userspace injects a machine check
while L2 is active and CR4.MCE=0. And a future fix to allow save/restore
of KVM_REQ_TRIPLE_FAULT, e.g. so that a synthesized triple fault isn't
lost on migration, will make it trivially easy for userspace to trigger
the WARN.
Clearing KVM_REQ_TRIPLE_FAULT when forcibly leaving guest mode is
tempting, but wrong, especially if/when the request is saved/restored,
e.g. if userspace restores events (including a triple fault) and then
restores nested state (which may forcibly leave guest mode). Ignoring
the fact that KVM doesn't currently provide the necessary APIs, it's
userspace's responsibility to manage pending events during save/restore.
------------[ cut here ]------------
WARNING: CPU: 7 PID: 1399 at arch/x86/kvm/vmx/nested.c:4522 nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel]
Modules linked in: kvm_intel kvm irqbypass
CPU: 7 PID: 1399 Comm: state_test Not tainted 5.17.0-rc3+ #808
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel]
Call Trace:
<TASK>
vmx_leave_nested+0x30/0x40 [kvm_intel]
vmx_set_nested_state+0xca/0x3e0 [kvm_intel]
kvm_arch_vcpu_ioctl+0xf49/0x13e0 [kvm]
kvm_vcpu_ioctl+0x4b9/0x660 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: cb6a32c2b8 ("KVM: x86: Handle triple fault in L2 without killing L1")
Cc: stable@vger.kernel.org
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220407002315.78092-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inhibit the AVIC of the vCPU that is running nested for the duration of the
nested run, so that all interrupts arriving from both its vCPU siblings
and from KVM are delivered using normal IPIs and cause that vCPU to vmexit.
Note that unlike normal AVIC inhibition, there is no need to
update the AVIC mmio memslot, because the nested guest uses its
own set of paging tables.
That also means that AVIC doesn't need to be inhibited VM wide.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case L1 enables vGIF for L2, the L2 cannot affect L1's GIF, regardless
of STGI/CLGI intercepts, and since VM entry enables GIF, this means
that L1's GIF is always 1 while L2 is running.
Thus in this case leave L1's vGIF in vmcb01, while letting L2
control the vGIF thus implementing nested vGIF.
Also allow KVM to toggle L1's GIF during nested entry/exit
by always using vmcb01.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose the pause filtering and threshold in the guest CPUID
and support PAUSE filtering when possible:
- If the L0 doesn't intercept PAUSE (cpu_pm=on), then allow L1 to
have full control over PAUSE filtering.
- if the L1 doesn't intercept PAUSE, use host values and update
the adaptive count/threshold even when running nested.
- Otherwise always exit to L1; it is not really possible to merge
the fields correctly. It is expected that in this case, userspace
will not enable this feature in the guest CPUID, to avoid having the
guest update both fields pointlessly.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was tested with kvm-unit-test that was developed
for this purpose.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-3-mlevitsk@redhat.com>
[Copy all of DEBUGCTL except for reserved bits. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When L2 is running without LBR virtualization, we should ensure
that L1's LBR msrs continue to update as usual.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the code a bit shorter and cleaner.
No functional change intended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was tested by booting L1,L2,L3 (all Linux) and checking
that no VMLOAD/VMSAVE vmexits happened.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220301143650.143749-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that __kvm_mmu_new_pgd does not look at the MMU's root_level and
shadow_root_level anymore, pull the PGD load after the initialization of
the shadow MMUs.
Besides being more intuitive, this enables future simplifications
and optimizations because it's not necessary anymore to compute the
role outside kvm_init_mmu. In particular, kvm_mmu_reset_context was not
attempting to use a cached PGD to avoid having to figure out the new role.
With this change, it could follow what nested_{vmx,svm}_load_cr3 are doing,
and avoid unloading all the cached roots.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to nVMX commit 502d2bf5f2 ("KVM: nVMX: Implement Enlightened MSR
Bitmap feature"), add support for the feature for nSVM (Hyper-V on KVM).
Notable differences from nVMX implementation:
- As the feature uses SW reserved fields in VMCB control, KVM needs to
make sure it's dealing with a Hyper-V guest (kvm_hv_hypercall_enabled()).
- 'msrpm_base_pa' needs to be always be overwritten in
nested_svm_vmrun_msrpm(), even when the update is skipped. As an
optimization, nested_vmcb02_prepare_control() copies it from VMCB01
so when MSR-Bitmap feature for L2 is disabled nothing needs to be done.
- 'struct vmcb_ctrl_area_cached' needs to be extended with clean
fields/sw reserved data and __nested_copy_vmcb_control_to_cache() needs to
copy it so nested_svm_vmrun_msrpm() can use it later.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to nVMX commit ed2a4800ae ("KVM: nVMX: Track whether changes in
L0 require MSR bitmap for L2 to be rebuilt"), introduce a flag to keep
track of whether MSR bitmap for L2 needs to be rebuilt due to changes in
MSR bitmap for L1 or switching to a different L2.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Turns out that due to review feedback and/or rebases
I accidentally moved the call to nested_svm_load_cr3 to be too early,
before the NPT is enabled, which is very wrong to do.
KVM can't even access guest memory at that point as nested NPT
is needed for that, and of course it won't initialize the walk_mmu,
which is main issue the patch was addressing.
Fix this for real.
Fixes: 232f75d3b4 ("KVM: nSVM: call nested_svm_load_cr3 on nested state load")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220207155447.840194-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Forcibly leave nested virtualization operation if userspace toggles SMM
state via KVM_SET_VCPU_EVENTS or KVM_SYNC_X86_EVENTS. If userspace
forces the vCPU out of SMM while it's post-VMXON and then injects an SMI,
vmx_enter_smm() will overwrite vmx->nested.smm.vmxon and end up with both
vmxon=false and smm.vmxon=false, but all other nVMX state allocated.
Don't attempt to gracefully handle the transition as (a) most transitions
are nonsencial, e.g. forcing SMM while L2 is running, (b) there isn't
sufficient information to handle all transitions, e.g. SVM wants access
to the SMRAM save state, and (c) KVM_SET_VCPU_EVENTS must precede
KVM_SET_NESTED_STATE during state restore as the latter disallows putting
the vCPU into L2 if SMM is active, and disallows tagging the vCPU as
being post-VMXON in SMM if SMM is not active.
Abuse of KVM_SET_VCPU_EVENTS manifests as a WARN and memory leak in nVMX
due to failure to free vmcs01's shadow VMCS, but the bug goes far beyond
just a memory leak, e.g. toggling SMM on while L2 is active puts the vCPU
in an architecturally impossible state.
WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline]
WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656
Modules linked in:
CPU: 1 PID: 3606 Comm: syz-executor725 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline]
RIP: 0010:free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656
Code: <0f> 0b eb b3 e8 8f 4d 9f 00 e9 f7 fe ff ff 48 89 df e8 92 4d 9f 00
Call Trace:
<TASK>
kvm_arch_vcpu_destroy+0x72/0x2f0 arch/x86/kvm/x86.c:11123
kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]
kvm_destroy_vcpus+0x11f/0x290 arch/x86/kvm/../../../virt/kvm/kvm_main.c:460
kvm_free_vcpus arch/x86/kvm/x86.c:11564 [inline]
kvm_arch_destroy_vm+0x2e8/0x470 arch/x86/kvm/x86.c:11676
kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1217 [inline]
kvm_put_kvm+0x4fa/0xb00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1250
kvm_vm_release+0x3f/0x50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1273
__fput+0x286/0x9f0 fs/file_table.c:311
task_work_run+0xdd/0x1a0 kernel/task_work.c:164
exit_task_work include/linux/task_work.h:32 [inline]
do_exit+0xb29/0x2a30 kernel/exit.c:806
do_group_exit+0xd2/0x2f0 kernel/exit.c:935
get_signal+0x4b0/0x28c0 kernel/signal.c:2862
arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207
__syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Cc: stable@vger.kernel.org
Reported-by: syzbot+8112db3ab20e70d50c31@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220125220358.2091737-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It uses vcpu->arch.walk_mmu always; nested EPT does not have PDPTRs,
and nested NPT treats them like all other non-leaf page table levels
instead of caching them.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-11-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VCPU_EXREG_CR3 is never cleared from vcpu->arch.regs_avail or
vcpu->arch.regs_dirty in SVM; therefore, marking CR3 as available is
merely a NOP, and testing it will likewise always succeed.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211108124407.12187-9-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This structure will replace vmcb_control_area in
svm_nested_state, providing only the fields that are actually
used by the nested state. This avoids having and copying around
uninitialized fields. The cost of this, however, is that all
functions (in this case vmcb_is_intercept) expect the old
structure, so they need to be duplicated.
In addition, in svm_get_nested_state() user space expects a
vmcb_control_area struct, so we need to copy back all fields
in a temporary structure before copying it to userspace.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211103140527.752797-7-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the struct vmcb_control_area parameter from nested_vmcb_check_controls,
for consistency with the functions that operate on the save area. This
way, VMRUN uses the version without underscores for both areas, while
KVM_SET_NESTED_STATE uses the version with underscores.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the already checked svm->nested.save cached fields
(EFER, CR0, CR4, ...) instead of vmcb12's in
nested_vmcb02_prepare_save().
This prevents from creating TOC/TOU races, since the
guest could modify the vmcb12 fields.
This also avoids the need of force-setting EFER_SVME in
nested_vmcb02_prepare_save.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211103140527.752797-6-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that struct vmcb_save_area_cached contains the required
vmcb fields values (done in nested_load_save_from_vmcb12()),
check them to see if they are correct in nested_vmcb_valid_sregs().
While at it, rename nested_vmcb_valid_sregs in nested_vmcb_check_save.
__nested_vmcb_check_save takes the additional @save parameter, so it
is helpful when we want to check a non-svm save state, like in
svm_set_nested_state. The reason for that is that save is the L1
state, not L2, so we check it without moving it to svm->nested.save.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-5-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following the same naming convention of the previous patch,
rename nested_load_control_from_vmcb12.
In addition, inline copy_vmcb_control_area as it is only called
by this function.
__nested_copy_vmcb_control_to_cache() works with vmcb_control_area
parameters and it will be useful in next patches, when we use
local variables instead of svm cached state.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-4-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is useful in the next patch, to keep a saved copy
of vmcb12 registers and pass it around more easily.
Instead of blindly copying everything, we just copy EFER, CR0, CR3, CR4,
DR6 and DR7 which are needed by the VMRUN checks. If more fields will
need to be checked, it will be quite obvious to see that they must be added
in struct vmcb_save_area_cached and in nested_copy_vmcb_save_to_cache().
__nested_copy_vmcb_save_to_cache() takes a vmcb_save_area_cached
parameter, which is useful in order to save the state to a local
variable.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inline nested_vmcb_check_cr3_cr4 as it is not called by anyone else.
Doing so simplifies next patches.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211103140527.752797-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to section "TLB Flush" in APM vol 2,
"Support for TLB_CONTROL commands other than the first two, is
optional and is indicated by CPUID Fn8000_000A_EDX[FlushByAsid].
All encodings of TLB_CONTROL not defined in the APM are reserved."
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20210920235134.101970-3-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was tested by booting a nested guest with TSC=1Ghz,
observing the clocks, and doing about 100 cycles of migration.
Note that qemu patch is needed to support migration because
of a new MSR that needs to be placed in the migration state.
The patch will be sent to the qemu mailing list soon.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-14-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the SDM, the CPU never modifies these settings.
It loads them on VM entry and updates an internal copy instead.
Also don't load them from the vmcb12 as we don't expose these
features to the nested guest yet.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These field correspond to features that we don't expose yet to L2
While currently there are no CVE worthy features in this field,
if AMD adds more features to this field, that could allow guest
escapes similar to CVE-2021-3653 and CVE-2021-3656.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-6-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the KVM_REQ_GET_NESTED_STATE_PAGES on SVM only reloads PDPTRs,
and MSR bitmap, with former not really needed for SMM as SMM exit code
reloads them again from SMRAM'S CR3, and later happens to work
since MSR bitmap isn't modified while in SMM.
Still it is better to be consistient with VMX.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210913140954.165665-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as they
do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is disabled
- bugfixes and cleanups, especially with respect to 1) vCPU reset and
2) choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmE2CIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMyqwf+Ky2WoThuQ9Ra0r/m8pUTAx5+gsAf
MmG24rNLE+26X0xuBT9Q5+etYYRLrRTWJvo5cgHooz7muAYW6scR+ho5xzvLTAxi
DAuoijkXsSdGoFCp0OMUHiwG3cgY5N7feTEwLPAb2i6xr/l6SZyCP4zcwiiQbJ2s
UUD0i3rEoNQ02/hOEveud/ENxzUli9cmmgHKXR3kNgsJClSf1fcuLnhg+7EGMhK9
+c2V+hde5y0gmEairQWm22MLMRolNZ5NL4kjykiNh2M5q9YvbHe5+f/JmENlNZMT
bsUQT6Ry1ukuJ0V59rZvUw71KknPFzZ3d6HgW4pwytMq6EJKiISHzRbVnQ==
=FCAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
If L1 disables VMLOAD/VMSAVE intercepts, and doesn't enable
Virtual VMLOAD/VMSAVE (currently not supported for the nested hypervisor),
then VMLOAD/VMSAVE must operate on the L1 physical memory, which is only
possible by making L0 intercept these instructions.
Failure to do so allowed the nested guest to run VMLOAD/VMSAVE unintercepted,
and thus read/write portions of the host physical memory.
Fixes: 89c8a4984f ("KVM: SVM: Enable Virtual VMLOAD VMSAVE feature")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Invert the mask of bits that we pick from L2 in
nested_vmcb02_prepare_control
* Invert and explicitly use VIRQ related bits bitmask in svm_clear_vintr
This fixes a security issue that allowed a malicious L1 to run L2 with
AVIC enabled, which allowed the L2 to exploit the uninitialized and enabled
AVIC to read/write the host physical memory at some offsets.
Fixes: 3d6368ef58 ("KVM: SVM: Add VMRUN handler")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For an event to be in injected state when nested_svm_vmrun executes,
it must have come from exitintinfo when svm_complete_interrupts ran:
vcpu_enter_guest
static_call(kvm_x86_run) -> svm_vcpu_run
svm_complete_interrupts
// now the event went from "exitintinfo" to "injected"
static_call(kvm_x86_handle_exit) -> handle_exit
svm_invoke_exit_handler
vmrun_interception
nested_svm_vmrun
However, no event could have been in exitintinfo before a VMRUN
vmexit. The code in svm.c is a bit more permissive than the one
in vmx.c:
if (is_external_interrupt(svm->vmcb->control.exit_int_info) &&
exit_code != SVM_EXIT_EXCP_BASE + PF_VECTOR &&
exit_code != SVM_EXIT_NPF && exit_code != SVM_EXIT_TASK_SWITCH &&
exit_code != SVM_EXIT_INTR && exit_code != SVM_EXIT_NMI)
but in any case, a VMRUN instruction would not even start to execute
during an attempted event delivery.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is possible that AVIC was requested to be disabled but
not yet disabled, e.g if the nested entry is done right
after svm_vcpu_after_set_cpuid.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make svm_copy_vmrun_state()/svm_copy_vmloadsave_state() interface match
'memcpy(dest, src)' to avoid any confusion.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210719090322.625277-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To match svm_copy_vmrun_state(), rename nested_svm_vmloadsave() to
svm_copy_vmloadsave_state().
Opportunistically add missing braces to 'else' branch in
vmload_vmsave_interception().
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210716144104.465269-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the VM was migrated while in SMM, no nested state was saved/restored,
and therefore svm_leave_smm has to load both save and control area
of the vmcb12. Save area is already loaded from HSAVE area,
so now load the control area as well from the vmcb12.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Separate the code setting non-VMLOAD-VMSAVE state from
svm_set_nested_state() into its own function. This is going to be
re-used from svm_enter_smm()/svm_leave_smm().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APM states that "The address written to the VM_HSAVE_PA MSR, which holds
the address of the page used to save the host state on a VMRUN, must point
to a hypervisor-owned page. If this check fails, the WRMSR will fail with
a #GP(0) exception. Note that a value of 0 is not considered valid for the
VM_HSAVE_PA MSR and a VMRUN that is attempted while the HSAVE_PA is 0 will
fail with a #GP(0) exception."
svm_set_msr() already checks that the supplied address is valid, so only
check for '0' is missing. Add it to nested_svm_vmrun().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-3-vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In theory there are no side effects of not intercepting #SMI,
because then #SMI becomes transparent to the OS and the KVM.
Plus an observation on recent Zen2 CPUs reveals that these
CPUs ignore #SMI interception and never deliver #SMI VMexits.
This is also useful to test nested KVM to see that L1
handles #SMIs correctly in case when L1 doesn't intercept #SMI.
Finally the default remains the same, the SMI are intercepted
by default thus this patch doesn't have any effect unless
non default module param value is used.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand the comments for the MMU roles. The interactions with gfn_track
PGD reuse in particular are hairy.
Regarding PGD reuse, add comments in the nested virtualization flows to
call out why kvm_init_mmu() is unconditionally called even when nested
TDP is used.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-50-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move nested NPT's invocation of reset_shadow_zero_bits_mask() into the
MMU proper and unexport said function. Aside from dropping an export,
this is a baby step toward eliminating the call entirely by fixing the
shadow_root_level confusion.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment in the nested NPT initialization flow to call out that it
intentionally uses vmcb01 instead current vCPU state to get the effective
hCR4 and hEFER for L1's NPT context.
Note, despite nSVM's efforts to handle the case where vCPU state doesn't
reflect L1 state, the MMU may still do the wrong thing due to pulling
state from the vCPU instead of the passed in CR0/CR4/EFER values. This
will be addressed in future commits.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When configuring KVM's MMU, pass CR0 and CR4 as unsigned longs, and EFER
as a u64 in various flows (mostly MMU). Passing the params as u32s is
functionally ok since all of the affected registers reserve bits 63:32 to
zero (enforced by KVM), but it's technically wrong.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the @reset_roots param from kvm_init_mmu(), the one user,
kvm_mmu_reset_context() has already unloaded the MMU and thus freed and
invalidated all roots. This also happens to be why the reset_roots=true
paths doesn't leak roots; they're already invalid.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop skip_mmu_sync and skip_tlb_flush from __kvm_mmu_new_pgd() now that
all call sites unconditionally skip both the sync and flush.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce nested_svm_transition_tlb_flush() and use it force an MMU sync
and TLB flush on nSVM VM-Enter and VM-Exit instead of sneaking the logic
into the __kvm_mmu_new_pgd() call sites. Add a partial todo list to
document issues that need to be addressed before the unconditional sync
and flush can be modified to look more like nVMX's logic.
In addition to making nSVM's forced flushing more overt (guess who keeps
losing track of it), the new helper brings further convergence between
nSVM and nVMX, and also sets the stage for dropping the "skip" params
from __kvm_mmu_new_pgd().
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
if new KVM_*_SREGS2 ioctls are used, the PDPTRs are
a part of the migration state and are correctly
restored by those ioctls.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document the actual reason why we need to do it
on migration and move the call to svm_set_nested_state
to be closer to VMX code.
To avoid loading the PDPTRs from possibly not up to date memory map,
in nested_svm_load_cr3 after the move, move this code to
.get_nested_state_pages.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the "PDPTRs unchanged" check to skip PDPTR loading during nested
SVM transitions as it's not at all an optimization. Reading guest memory
to get the PDPTRs isn't magically cheaper by doing it in pdptrs_changed(),
and if the PDPTRs did change, KVM will end up doing the read twice.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210607090203.133058-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the 'nested_run' statistic counts all guest-entry attempts,
including those that fail during vmentry checks on Intel and during
consistency checks on AMD. Convert this statistic to count only those
guest-entries that make it past these state checks and make it to guest
code. This will tell us the number of guest-entries that actually executed
or tried to execute guest code.
Signed-off-by: Krish Sadhukhan <Krish.Sadhukhan@oracle.com>
Message-Id: <20210609180340.104248-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
