This allows to see how many interrupts were delivered via the
APICv/AVIC from the host.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211209115440.394441-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
em_rdmsr() and em_wrmsr() return X86EMUL_IO_NEEDED if MSR accesses
required an exit to userspace. However, x86_emulate_insn() doesn't return
X86EMUL_*, so x86_emulate_instruction() doesn't directly act on
X86EMUL_IO_NEEDED; instead, it looks for other signals to differentiate
between PIO, MMIO, etc. causing RDMSR/WRMSR emulation not to
exit to userspace now.
Nevertheless, if the userspace_msr_exit_test testcase in selftests
is changed to test RDMSR/WRMSR with a forced emulation prefix,
the test passes. What happens is that first userspace exit
information is filled but the userspace exit does not happen.
Because x86_emulate_instruction() returns 1, the guest retries
the instruction---but this time RIP has already been adjusted
past the forced emulation prefix, so the guest executes RDMSR/WRMSR
and the userspace exit finally happens.
Since the X86EMUL_IO_NEEDED path has provided a complete_userspace_io
callback, x86_emulate_instruction() can just return 0 if the
callback is not NULL. Then RDMSR/WRMSR instruction emulation will
exit to userspace directly, without the RDMSR/WRMSR vmexit.
Fixes: 1ae099540e ("KVM: x86: Allow deflecting unknown MSR accesses to user space")
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <56f9df2ee5c05a81155e2be366c9dc1f7adc8817.1635842679.git.houwenlong93@linux.alibaba.com>
If msr access triggers an exit to userspace, the
complete_userspace_io callback would skip instruction by vendor
callback for kvm_skip_emulated_instruction(). However, when msr
access comes from the emulator, e.g. if kvm.force_emulation_prefix
is enabled and the guest uses rdmsr/wrmsr with kvm prefix,
VM_EXIT_INSTRUCTION_LEN in vmcs is invalid and
kvm_emulate_instruction() should be used to skip instruction
instead.
As Sean noted, unlike the previous case, there's no #UD if
unrestricted guest is disabled and the guest accesses an MSR in
Big RM. So the correct way to fix this is to attach a different
callback when the msr access comes from the emulator.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <34208da8f51580a06e45afefac95afea0e3f96e3.1635842679.git.houwenlong93@linux.alibaba.com>
The next patch would use kvm_emulate_instruction() with
EMULTYPE_SKIP in complete_userspace_io callback to fix a
problem in msr access emulation. However, EMULTYPE_SKIP
only updates RIP, more things like updating interruptibility
state and injecting single-step #DBs would be done in the
callback. Since the emulator also does those things after
x86_emulate_insn(), add a new emulation type to pair with
EMULTYPE_SKIP to do those things for completion of user exits
within the emulator.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <8f8c8e268b65f31d55c2881a4b30670946ecfa0d.1635842679.git.houwenlong93@linux.alibaba.com>
Truncate the new EIP to a 32-bit value when handling EMULTYPE_SKIP as the
decode phase does not truncate _eip. Wrapping the 32-bit boundary is
legal if and only if CS is a flat code segment, but that check is
implicitly handled in the form of limit checks in the decode phase.
Opportunstically prepare for a future fix by storing the result of any
truncation in "eip" instead of "_eip".
Fixes: 1957aa63be ("KVM: VMX: Handle single-step #DB for EMULTYPE_SKIP on EPT misconfig")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <093eabb1eab2965201c9b018373baf26ff256d85.1635842679.git.houwenlong93@linux.alibaba.com>
It uses vcpu->arch.walk_mmu always; nested EPT does not have PDPTRs,
and nested NPT treats them like all other non-leaf page table levels
instead of caching them.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-11-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reduce an indirect function call (retpoline) and some intialization
code.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-4-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mmu->gva_to_gpa() has no "struct kvm_mmu *mmu", so an extra
FNAME(gva_to_gpa_nested) is needed.
Add the parameter can simplify the code. And it makes it explicit that
the walk is upon vcpu->arch.walk_mmu for gva and vcpu->arch.mmu for L2
gpa in translate_nested_gpa() via the new parameter.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-3-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is unchanged in most cases.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211111144527.88852-1-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When vcpu->arch.cr3 is changed, it should be marked dirty unless it
is being updated to the value of the architecture guest CR3 (i.e.
VMX.GUEST_CR3 or vmcb->save.cr3 when tdp is enabled).
This patch has no functionality changed because
kvm_register_mark_dirty(vcpu, VCPU_EXREG_CR3) is superset of
kvm_register_mark_available(vcpu, VCPU_EXREG_CR3) with additional
change to vcpu->arch.regs_dirty, but no code uses regs_dirty for
VCPU_EXREG_CR3. (vmx_load_mmu_pgd() uses vcpu->arch.regs_avail instead
to test if VCPU_EXREG_CR3 dirty which means current code (ab)uses
regs_avail for VCPU_EXREG_CR3 dirty information.)
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211108124407.12187-11-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not functionality changed.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211108124407.12187-7-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In set_cr4_guest_host_mask(), all cr4 pdptr bits are already set to be
intercepted in an unclear way.
Add X86_CR4_PDPTR_BITS to make it clear and self-documented.
No functionality changed.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211108124407.12187-6-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For VMX with EPT, dirty PDPTRs need to be loaded before the next vmentry
via vmx_load_mmu_pgd()
But not all paths that call load_pdptrs() will cause vmx_load_mmu_pgd()
to be invoked. Normally, kvm_mmu_reset_context() is used to cause
KVM_REQ_LOAD_MMU_PGD, but sometimes it is skipped:
* commit d81135a57aa6("KVM: x86: do not reset mmu if CR0.CD and
CR0.NW are changed") skips kvm_mmu_reset_context() after load_pdptrs()
when changing CR0.CD and CR0.NW.
* commit 21823fbda552("KVM: x86: Invalidate all PGDs for the current
PCID on MOV CR3 w/ flush") skips KVM_REQ_LOAD_MMU_PGD after
load_pdptrs() when rewriting the CR3 with the same value.
* commit a91a7c709600("KVM: X86: Don't reset mmu context when
toggling X86_CR4_PGE") skips kvm_mmu_reset_context() after
load_pdptrs() when changing CR4.PGE.
Fixes: d81135a57a ("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed")
Fixes: 21823fbda5 ("KVM: x86: Invalidate all PGDs for the current PCID on MOV CR3 w/ flush")
Fixes: a91a7c7096 ("KVM: X86: Don't reset mmu context when toggling X86_CR4_PGE")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211108124407.12187-2-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_vcpu_block() directly for all wait states except HALTED so that
kvm_vcpu_halt() is no longer a misnomer on x86.
Functionally, this means KVM will never attempt halt-polling or adjust
vcpu->halt_poll_ns for INIT_RECEIVED (a.k.a. Wait-For-SIPI (WFS)) or
AP_RESET_HOLD; UNINITIALIZED is handled in kvm_arch_vcpu_ioctl_run(),
and x86 doesn't use any other "wait" states.
As mentioned above, the motivation of this is purely so that "halt" isn't
overloaded on x86, e.g. in KVM's stats. Skipping halt-polling for WFS
(and RESET_HOLD) has no meaningful effect on guest performance as there
are typically single-digit numbers of INIT-SIPI sequences per AP vCPU,
per boot, versus thousands of HLTs just to boot to console.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Go directly to kvm_vcpu_block() when handling the case where userspace
attempts to run an UNINITIALIZED vCPU. The vCPU is not halted, nor is it
likely that halt-polling will be successful in this case.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_vcpu_block() to kvm_vcpu_halt() in preparation for splitting
the actual "block" sequences into a separate helper (to be named
kvm_vcpu_block()). x86 will use the standalone block-only path to handle
non-halt cases where the vCPU is not runnable.
Rename block_ns to halt_ns to match the new function name.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename a variety of HLT-related helpers to free up the function name
"kvm_vcpu_halt" for future use in generic KVM code, e.g. to differentiate
between "block" and "halt".
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no point in recalculating from scratch the total number of pages
in all memslots each time a memslot is created or deleted. Use KVM's
cached nr_memslot_pages to compute the default max number of MMU pages.
Note that even with nr_memslot_pages capped at ULONG_MAX we can't safely
multiply it by KVM_PERMILLE_MMU_PAGES (20) since this operation can
possibly overflow an unsigned long variable.
Write this "* 20 / 1000" operation as "/ 50" instead to avoid such
overflow.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: use common KVM field and rework changelog accordingly]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <d14c5a24535269606675437d5602b7dac4ad8c0e.1638817640.git.maciej.szmigiero@oracle.com>
There is no point in calling kvm_mmu_change_mmu_pages() for memslot
operations that don't change the total page count, so do it just for
KVM_MR_CREATE and KVM_MR_DELETE.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <9e56b7616a11f5654e4ab486b3237366b7ba9f2a.1638817640.git.maciej.szmigiero@oracle.com>
Play nice with a NULL @old or @new when handling memslot updates so that
common KVM can pass NULL for one or the other in CREATE and DELETE cases
instead of having to synthesize a dummy memslot.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <2eb7788adbdc2bc9a9c5f86844dd8ee5c8428732.1638817640.git.maciej.szmigiero@oracle.com>
Drop the @mem param from kvm_arch_{prepare,commit}_memory_region() now
that its use has been removed in all architectures.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <aa5ed3e62c27e881d0d8bc0acbc1572bc336dc19.1638817640.git.maciej.szmigiero@oracle.com>
Get the number of pages directly from the new memslot instead of
computing the same from the userspace memory region when allocating
memslot metadata. This will allow a future patch to drop @mem.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <ef44892eb615f5c28e682bbe06af96aff9ce2a9f.1638817639.git.maciej.szmigiero@oracle.com>
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch
code to handle propagating arch specific data from "new" to "old" when
necessary. This is a baby step towards dynamically allocating "new" from
the get go, and is a (very) minor performance boost on x86 due to not
unnecessarily copying arch data.
For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE
and FLAGS_ONLY. This is functionally a nop as the previous behavior
would overwrite the pointer for CREATE, and eventually discard/ignore it
for DELETE.
For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV,
x86 needs to reallocate arch data in the MOVE case as the size of x86's
allocations depend on the alignment of the memslot's gfn.
Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to
match the "commit" prototype.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[mss: add missing RISCV kvm_arch_prepare_memory_region() change]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <67dea5f11bbcfd71e3da5986f11e87f5dd4013f9.1638817639.git.maciej.szmigiero@oracle.com>
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.
Let's bite the bullet and repaint all of it in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All architectures have similar loops iterating over the vcpus,
freeing one vcpu at a time, and eventually wiping the reference
off the vcpus array. They are also inconsistently taking
the kvm->lock mutex when wiping the references from the array.
Make this code common, which will simplify further changes.
The locking is dropped altogether, as this should only be called
when there is no further references on the kvm structure.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-2-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_vcpu_apicv_active() returns false if a virtual machine has no in-kernel
local APIC, however kvm_apicv_activated might still be true if there are
no reasons to disable APICv; in fact it is quite likely that there is none
because APICv is inhibited by specific configurations of the local APIC
and those configurations cannot be programmed. This triggers a WARN:
WARN_ON_ONCE(kvm_apicv_activated(vcpu->kvm) != kvm_vcpu_apicv_active(vcpu));
To avoid this, introduce another cause for APICv inhibition, namely the
absence of an in-kernel local APIC. This cause is enabled by default,
and is dropped by either KVM_CREATE_IRQCHIP or the enabling of
KVM_CAP_IRQCHIP_SPLIT.
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Fixes: ee49a89329 ("KVM: x86: Move SVM's APICv sanity check to common x86", 2021-10-22)
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com>
Message-Id: <20211130123746.293379-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IRTE for an assigned device can trigger a POSTED_INTR_VECTOR even
if APICv is disabled on the vCPU that receives it. In that case, the
interrupt will just cause a vmexit and leave the ON bit set together
with the PIR bit corresponding to the interrupt.
Right now, the interrupt would not be delivered until APICv is re-enabled.
However, fixing this is just a matter of always doing the PIR->IRR
synchronization, even if the vCPU has temporarily disabled APICv.
This is not a problem for performance, or if anything it is an
improvement. First, in the common case where vcpu->arch.apicv_active is
true, one fewer check has to be performed. Second, static_call_cond will
elide the function call if APICv is not present or disabled. Finally,
in the case for AMD hardware we can remove the sync_pir_to_irr callback:
it is only needed for apic_has_interrupt_for_ppr, and that function
already has a fallback for !APICv.
Cc: stable@vger.kernel.org
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 63f5a1909f ("KVM: x86: Alert userspace that KVM_SET_CPUID{,2}
after KVM_RUN is broken") officially deprecated KVM_SET_CPUID{,2} ioctls
after first successful KVM_RUN and promissed to make this sequence forbiden
in 5.16. It's time to fulfil the promise.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211122175818.608220-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like KVM_REQ_TLB_FLUSH_CURRENT, the GUEST variant needs to be serviced at
nested transitions, as KVM doesn't track requests for L1 vs L2. E.g. if
there's a pending flush when a nested VM-Exit occurs, then the flush was
requested in the context of L2 and needs to be handled before switching
to L1, otherwise the flush for L2 would effectiely be lost.
Opportunistically add a helper to handle CURRENT and GUEST as a pair, the
logic for when they need to be serviced is identical as both requests are
tied to L1 vs. L2, the only difference is the scope of the flush.
Reported-by: Lai Jiangshan <jiangshanlai+lkml@gmail.com>
Fixes: 07ffaf343e ("KVM: nVMX: Sync all PGDs on nested transition with shadow paging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211125014944.536398-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The capability, albeit present, was never exposed via KVM_CHECK_EXTENSION.
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Cc: Peter Gonda <pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Synchronize the two calls to kvm_x86_sync_pir_to_irr. The one
in the reenter-guest fast path invoked the callback unconditionally
even if LAPIC is present but disabled. In this case, there are
no interrupts to deliver, and therefore posted interrupts can
be ignored.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It doesn't make sense to return the recommended maximum number of
vCPUs which exceeds the maximum possible number of vCPUs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When processing a hypercall for a guest with protected state, currently
SEV-ES guests, the guest CS segment register can't be checked to
determine if the guest is in 64-bit mode. For an SEV-ES guest, it is
expected that communication between the guest and the hypervisor is
performed to shared memory using the GHCB. In order to use the GHCB, the
guest must have been in long mode, otherwise writes by the guest to the
GHCB would be encrypted and not be able to be comprehended by the
hypervisor.
Create a new helper function, is_64_bit_hypercall(), that assumes the
guest is in 64-bit mode when the guest has protected state, and returns
true, otherwise invoking is_64_bit_mode() to determine the mode. Update
the hypercall related routines to use is_64_bit_hypercall() instead of
is_64_bit_mode().
Add a WARN_ON_ONCE() to is_64_bit_mode() to catch occurences of calls to
this helper function for a guest running with protected state.
Fixes: f1c6366e30 ("KVM: SVM: Add required changes to support intercepts under SEV-ES")
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e0b20c770c9d0d1403f23d83e785385104211f74.1621878537.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
In 64-bit mode, x86 instruction encoding allows us to use the low 8 bits
of any GPR as an 8-bit operand. In 32-bit mode, however, we can only use
the [abcd] registers. For which, GCC has the "q" constraint instead of
the less restrictive "r".
Also fix st->preempted, which is an input/output operand rather than an
input.
Fixes: 7e2175ebd6 ("KVM: x86: Fix recording of guest steal time / preempted status")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <89bf72db1b859990355f9c40713a34e0d2d86c98.camel@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all state needed for VMX's PT interrupt handler is exposed to
vmx.c (specifically the currently running vCPU), move the handler into
vmx.c where it belongs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211111020738.2512932-14-seanjc@google.com
Move x86's perf guest callbacks into common KVM, as they are semantically
identical to arm64's callbacks (the only other such KVM callbacks).
arm64 will convert to the common versions in a future patch.
Implement the necessary arm64 arch hooks now to avoid having to provide
stubs or a temporary #define (from x86) to avoid arm64 compilation errors
when CONFIG_GUEST_PERF_EVENTS=y.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211111020738.2512932-13-seanjc@google.com
Differentiate between IRQ and NMI for KVM's PMC overflow callback, which
was originally invoked in response to an NMI that arrived while the guest
was running, but was inadvertantly changed to fire on IRQs as well when
support for perf without PMU/NMI was added to KVM. In practice, this
should be a nop as the PMC overflow callback shouldn't be reached, but
it's a cheap and easy fix that also better documents the situation.
Note, this also doesn't completely prevent false positives if perf
somehow ends up calling into KVM, e.g. an NMI can arrive in host after
KVM sets its flag.
Fixes: dd60d21706 ("KVM: x86: Fix perf timer mode IP reporting")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20211111020738.2512932-12-seanjc@google.com
Use the generic kvm_running_vcpu plus a new 'handling_intr_from_guest'
variable in kvm_arch_vcpu instead of the semi-redundant current_vcpu.
kvm_before/after_interrupt() must be called while the vCPU is loaded,
(which protects against preemption), thus kvm_running_vcpu is guaranteed
to be non-NULL when handling_intr_from_guest is non-zero.
Switching to kvm_get_running_vcpu() will allows moving KVM's perf
callbacks to generic code, and the new flag will be used in a future
patch to more precisely identify the "NMI from guest" case.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20211111020738.2512932-11-seanjc@google.com
To prepare for using static_calls to optimize perf's guest callbacks,
replace ->is_in_guest and ->is_user_mode with a new multiplexed hook
->state, tweak ->handle_intel_pt_intr to play nice with being called when
there is no active guest, and drop "guest" from ->get_guest_ip.
Return '0' from ->state and ->handle_intel_pt_intr to indicate "not in
guest" so that DEFINE_STATIC_CALL_RET0 can be used to define the static
calls, i.e. no callback == !guest.
[sean: extracted from static_call patch, fixed get_ip() bug, wrote changelog]
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20211111020738.2512932-7-seanjc@google.com
Override the Processor Trace (PT) interrupt handler for guest mode if and
only if PT is configured for host+guest mode, i.e. is being used
independently by both host and guest. If PT is configured for system
mode, the host fully controls PT and must handle all events.
Fixes: 8479e04e7d ("KVM: x86: Inject PMI for KVM guest")
Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reported-by: Artem Kashkanov <artem.kashkanov@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211111020738.2512932-4-seanjc@google.com
Wait to register perf callbacks until after doing vendor hardaware setup.
VMX's hardware_setup() configures Intel Processor Trace (PT) mode, and a
future fix to register the Intel PT guest interrupt hook if and only if
Intel PT is exposed to the guest will consume the configured PT mode.
Delaying registration to hardware setup is effectively a nop as KVM's perf
hooks all pivot on the per-CPU current_vcpu, which is non-NULL only when
KVM is handling an IRQ/NMI in a VM-Exit path. I.e. current_vcpu will be
NULL throughout both kvm_arch_init() and kvm_arch_hardware_setup().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211111020738.2512932-3-seanjc@google.com
In vcpu_load_eoi_exitmap(), currently the eoi_exit_bitmap[4] array is
initialized only when Hyper-V context is available, in other path it is
just passed to kvm_x86_ops.load_eoi_exitmap() directly from on the stack,
which would cause unexpected interrupt delivery/handling issues, e.g. an
*old* linux kernel that relies on PIT to do clock calibration on KVM might
randomly fail to boot.
Fix it by passing ioapic_handled_vectors to load_eoi_exitmap() when Hyper-V
context is not available.
Fixes: f2bc14b69c ("KVM: x86: hyper-v: Prepare to meet unallocated Hyper-V context")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Huang Le <huangle1@jd.com>
Message-Id: <62115b277dab49ea97da5633f8522daf@jd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When UBSAN is enabled, the code emitted for the call to guest_pv_has
includes a call to __ubsan_handle_load_invalid_value. objtool
complains that this call happens with UACCESS enabled; to avoid
the warning, pull the calls to user_access_begin into both arms
of the "if" statement, after the check for guest_pv_has.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix misuse of gfn-to-pfn cache when recording guest steal time / preempted status
* Fix selftests on APICv machines
* Fix sparse warnings
* Fix detection of KVM features in CPUID
* Cleanups for bogus writes to MSR_KVM_PV_EOI_EN
* Fixes and cleanups for MSR bitmap handling
* Cleanups for INVPCID
* Make x86 KVM_SOFT_MAX_VCPUS consistent with other architectures
Add support for AMD SEV and SEV-ES intra-host migration support. Intra
host migration provides a low-cost mechanism for userspace VMM upgrades.
In the common case for intra host migration, we can rely on the normal
ioctls for passing data from one VMM to the next. SEV, SEV-ES, and other
confidential compute environments make most of this information opaque, and
render KVM ioctls such as "KVM_GET_REGS" irrelevant. As a result, we need
the ability to pass this opaque metadata from one VMM to the next. The
easiest way to do this is to leave this data in the kernel, and transfer
ownership of the metadata from one KVM VM (or vCPU) to the next. In-kernel
hand off makes it possible to move any data that would be
unsafe/impossible for the kernel to hand directly to userspace, and
cannot be reproduced using data that can be handed to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_NR_VCPUS is used to get the "recommended" maximum number of
VCPUs and arm64/mips/riscv report num_online_cpus(). Powerpc reports
either num_online_cpus() or num_present_cpus(), s390 has multiple
constants depending on hardware features. On x86, KVM reports an
arbitrary value of '710' which is supposed to be the maximum tested
value but it's possible to test all KVM_MAX_VCPUS even when there are
less physical CPUs available.
Drop the arbitrary '710' value and return num_online_cpus() on x86 as
well. The recommendation will match other architectures and will mean
'no CPU overcommit'.
For reference, QEMU only queries KVM_CAP_NR_VCPUS to print a warning
when the requested vCPU number exceeds it. The static limit of '710'
is quite weird as smaller systems with just a few physical CPUs should
certainly "recommend" less.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211111134733.86601-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle #GP on INVPCID due to an invalid type in the common switch
statement instead of relying on the callers (VMX and SVM) to manually
validate the type.
Unlike INVVPID and INVEPT, INVPCID is not explicitly documented to check
the type before reading the operand from memory, so deferring the
type validity check until after that point is architecturally allowed.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109174426.2350547-3-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_lapic_enable_pv_eoi() is a misnomer as the function is also
used to disable PV EOI. Rename it to kvm_lapic_set_pv_eoi().
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211108152819.12485-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GUESTDBG_BLOCKIRQ relies on interrupts being injected using
standard kvm's inject_pending_event, and not via APICv/AVIC.
Since this is a debug feature, just inhibit APICv/AVIC while
KVM_GUESTDBG_BLOCKIRQ is in use on at least one vCPU.
Fixes: 61e5f69ef0 ("KVM: x86: implement KVM_GUESTDBG_BLOCKIRQ")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211108090245.166408-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
