qemu-system-ppc64 can handle both big and little endian kernels.
While some setups, like Debian, provide a symlink to execute
qemu-system-ppc64 as qemu-system-ppc64le, others, like ArchLinux, do not.
So always use qemu-system-ppc64 directly.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20231008-nolibc-qemu-ppc64-v1-1-29e2326e0420@weissschuh.net/
Acked-by: Willy Tarreau <w@1wt.eu>
When building with a multiarch-capable compiler, like those provided by
common distributions the -m32 argument is required to build 32bit code.
Wrap it in cc-option in case the compiler is not multiarch-capable.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20230917-nolibc-syscall-nr-v2-1-03863d509b9a@weissschuh.net
When the initramfs is embedded into the kernel each rebuild of it will
trigger a full kernel relink and all the expensive postprocessing steps.
Currently nolibc-test and therefore the initramfs are always rebuild,
even without source changes, leading to lots of slow kernel relinks.
Instead of linking the initramfs into the kernel assemble it manually
and pass it explicitly to qemu.
This avoids all of the kernel relinks.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Link: https://lore.kernel.org/r/20230917-nolibc-initramfs-v2-1-f0f293a8b198@weissschuh.net
Newer versions of glibc annotate the poll() function with
__attribute__(access) which triggers a compiler warning inside the
testcase poll_fault.
Avoid this by using a plain NULL which is enough for the testcase.
To avoid potential future warnings also adapt the other EFAULT
testcases, except select_fault as NULL is a valid value for its
argument.
nolibc-test.c: In function ‘run_syscall’:
nolibc-test.c:338:62: warning: ‘poll’ writing 8 bytes into a region of size 0 overflows the destination [-Wstringop-overflow=]
338 | do { if (!(cond)) result(llen, SKIPPED); else ret += expect_syserr2(expr, expret, experr1, experr2, llen); } while (0)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nolibc-test.c:341:9: note: in expansion of macro ‘EXPECT_SYSER2’
341 | EXPECT_SYSER2(cond, expr, expret, experr, 0)
| ^~~~~~~~~~~~~
nolibc-test.c:905:47: note: in expansion of macro ‘EXPECT_SYSER’
905 | CASE_TEST(poll_fault); EXPECT_SYSER(1, poll((void *)1, 1, 0), -1, EFAULT); break;
| ^~~~~~~~~~~~
cc1: note: destination object is likely at address zero
In file included from /usr/include/poll.h:1,
from nolibc-test.c:33:
/usr/include/sys/poll.h:54:12: note: in a call to function ‘poll’ declared with attribute ‘access (write_only, 1, 2)’
54 | extern int poll (struct pollfd *__fds, nfds_t __nfds, int __timeout)
| ^~~~
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This nolibc update for Linux 6.6-rc1 consists of:
Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts,
path to log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer
-----BEGIN PGP SIGNATURE-----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=OCH0
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
"Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts, path to
log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer"
* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
tools/nolibc: avoid undesired casts in the __sysret() macro
tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
tools/nolibc: silence ppc64 compile warnings
selftests/nolibc: libc-test: use HOSTCC instead of CC
tools/nolibc: stackprotector.h: make __stack_chk_init static
selftests/nolibc: allow report with existing test log
selftests/nolibc: add test support for ppc64
selftests/nolibc: add test support for ppc64le
selftests/nolibc: add test support for ppc
selftests/nolibc: add XARCH and ARCH mapping support
tools/nolibc: add support for powerpc64
tools/nolibc: add support for powerpc
MAINTAINERS: nolibc: add myself as co-maintainer
selftests/nolibc: enable compiler warnings
selftests/nolibc: don't strip nolibc-test
selftests/nolibc: prevent out of bounds access in expect_vfprintf
selftests/nolibc: use correct return type for read() and write()
selftests/nolibc: avoid sign-compare warnings
selftests/nolibc: avoid unused parameter warnings
selftests/nolibc: make functions static if possible
...
libc-test is mainly added to compare the behavior of nolibc to the
system libc, it is meaningless and error-prone with cross compiling.
Let's use HOSTCC instead of CC to avoid wrongly use cross compiler when
CROSS_COMPILE is passed or customized.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Fixes: cfb672f94f ("selftests/nolibc: add run-libc-test target")
Signed-off-by: Willy Tarreau <w@1wt.eu>
After the tests finish, it is valuable to report and summarize with
existing test log.
This avoid rerun or run the tests again when not necessary.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc64 variant for big endian 64-bit PowerPC, users can pass XARCH=ppc64
to test it.
The powernv machine of qemu-system-ppc64 is used with
powernv_be_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the
OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be
used as an hypervisor OS, running KVM guests, or simply as a host OS.
Notes,
- differs from little endian 64-bit PowerPC, vmlinux is used instead of
zImage, because big endian zImage [2] only boot on qemu with x-vof=on
(added from qemu v7.0) and a fixup patch [3] for qemu v7.0.51:
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- as 'man gcc' shows, '-mmultiple' is used to generate code that uses
the load multiple word instructions and the store multiple word
instructions. Those instructions do not work when the processor is in
little-endian mode (except PPC740/PPC750), so, we only enable it
for big endian powerpc.
- for big endian ppc64, as the help message from arch/powerpc/Kconfig
shows, the V2 ABI is standard for 64-bit little-endian, but for
big-endian it is less well tested by kernel and toolchain, so, use
elfv1 as-is, no need to explicitly ask toolchain to use elfv2 here.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
[2]: https://github.com/linuxppc/issues/issues/402
[3]: https://lore.kernel.org/qemu-devel/20220504065536.3534488-1-aik@ozlabs.ru/
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230722121019.GD17311@1wt.eu/
Link: https://lore.kernel.org/lkml/20230719043353.GC5331@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc64le variant for little endian 64-bit PowerPC, users can pass
XARCH=ppc64le to test it.
The powernv machine of qemu-system-ppc64le is used for there is just a
working powernv_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the
OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be
used as an hypervisor OS, running KVM guests, or simply as a host OS.
Notes,
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- little endian ppc64 prefers elfv2 to elfv1 if the toolchain (e.g. gcc
13.1.0) supports it, let's align with kernel, otherwise, our elfv1
binary will not run on kernel with elfv2 ABI.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230722120747.GC17311@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc variant for 32-bit PowerPC and uses it as the default variant of
powerpc architecture.
Users can pass XARCH=ppc (or ARCH=powerpc) to test 32-bit PowerPC.
The default qemu-system-ppc g3beige machine [1] is used to run 32-bit
powerpc kernel with pmac32_defconfig. The missing PMACZILOG serial tty
and console are enabled in another patch [2].
Note,
- zImage doesn't boot due to "qemu-system-ppc: Some ROM regions are
overlapping" error, so, vmlinux is used instead.
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- as 'man gcc' shows, '-mmultiple' is used to generate code that uses
the load multiple word instructions and the store multiple word
instructions. Those instructions do not work when the processor is in
little-endian mode (except PPC740/PPC750), so, we only enable it
for big endian powerpc.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powermac.html
[2]: https://lore.kernel.org/lkml/bb7b5f9958b3e3a20f6573ff7ce7c5dc566e7e32.1690982937.git.tanyuan@tinylab.org/
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/ZL9leVOI25S2+0+g@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Most of the CPU architectures have different variants, but kernel
usually only accepts parts of them via the ARCH variable, the others
should be customized via kernel config files.
To simplify testing, a new XARCH variable is added to extend the
kernel's ARCH with a few variants of the same architecture, and it is
used to customize variant specific variables, at last XARCH is converted
to the kernel's ARCH:
e.g. make run XARCH=<one of the supported variants>
| \
| `-> variant specific variables:
| IMAGE, DEFCONFIG, QEMU_ARCH, QEMU_ARGS, CFLAGS ...
\
`---> kernel's ARCH
XARCH and ARCH are carefully mapped to allow users to pass architecture
variants via XARCH or pass architecture via ARCH from cmdline.
PowerPC is the first user and also a very good reference architecture of
this mapping, it has variants with different combinations of
32-bit/64-bit and bit endian/little endian.
To use this mapping, the other architectures can refer to PowerPC, If
the target architecture only has one variant, XARCH is simply an alias
of ARCH, no additional mapping required.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702171715.GD16233@1wt.eu/
Link: https://lore.kernel.org/lkml/20230730061801.GA7690@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It will help the developers to avoid cruft and detect some bugs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Binary size is not important for nolibc-test and some debugging
information is nice to have, so don't strip the binary during linking.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
If read() fails and returns -1 (or returns garbage for some other
reason) buf would be accessed out of bounds.
Only use the return value of read() after it has been validated.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Avoid truncating values before comparing them.
As printf in nolibc doesn't support ssize_t add casts to int for
printing.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
These warnings will be enabled later so avoid triggering them.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This warning will be enabled later so avoid triggering it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This allows the compiler to generate warnings if they go unused.
Functions that are supposed to be used as breakpoints should not be
static, so un-statify those if necessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Recent fix ceb528feb7 ("selftests/nolibc: avoid gaps in test numbers")
had the annoying side effect of always returning skipped tests, which
are normally supposed to happen only when certain features are missing
to run the test (missing kernel options, toolchain not supporting
stack-protector etc). As such there are now always warnings. Let's
modify the test to not use the condition and instead use a ternary
expression to check the result.
Fixes: ceb528feb7 ("selftests/nolibc: avoid gaps in test numbers")
Cc: Thomas WeiÃ<9F>schuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It's documented as returning int which is also implemented by glibc and
musl, so adopt that return type.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Add a test case of pipe that sends and receives message in a single
process.
Suggested-by: Thomas Weißschuh <thomas@t-8ch.de>
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/all/c5de2d13-3752-4e1b-90d9-f58cca99c702@t-8ch.de/
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
[wt: fixed the "len" type to size_t to address a sign-compare warning
with upcoming patches]
Signed-off-by: Willy Tarreau <w@1wt.eu>
The other tests use 1 as failure, mmap_munmap_good uses -1 as failure,
let's fix up this.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
If the test description is longer than the status alignment the
parameter 'n' to putcharn() would lead to a signed underflow that then
gets converted to a very large unsigned value.
This in turn leads out-of-bound writes in memset() crashing the
application.
The failure case of EXPECT_PTRER() used in "mmap_bad" exhibits this
exact behavior.
Fixes: 29f5540be3 ("selftests/nolibc: add EXPECT_PTREQ, EXPECT_PTRNE and EXPECT_PTRER")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As the head comment of nolibc-test.c shows, it can be built in 3 ways:
$(CC) -nostdlib -include /path/to/nolibc.h => NOLIBC already defined
$(CC) -nostdlib -I/path/to/nolibc/sysroot => _NOLIBC_* guards are present
$(CC) with default libc => NOLIBC* never defined
Only last two of them are tested currently, let's allow test the first one too.
This may help to find issues about using nolibc.h to build programs. it
derives from this change:
commit 3a8039e289 ("tools/nolibc: Fix build of stdio.h due to header ordering")
Usage:
// test with sysroot by default
$ make run-user
// test without sysroot, using nolibc.h directly
$ make run-user NOLIBC_SYSROOT=0
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It is able to run nolibc-test directly without qemu-user when the target
machine is the same as the host machine.
Sometimes, the result running locally may help a lot when the qemu-user
package is too old.
When the target machine differs from the host machine, it is also able
to run nolibc-test directly with qemu-user-static + binfmt_misc.
Link: https://lore.kernel.org/lkml/ZKutZwIOfy5MqedG@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The startup code is critical to get the right argc, argv, envp/environ
and _auxv, let's add a startup test group and the corresponding
testcases.
The "environ" test case is also moved from the stdlib test group to this
new startup test group and it is renamed to "environ_envp".
Since argv0 has been used by many other test cases, let's add testcases
to gurantee it too.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
4 new pointer compare macros are added, they are similar to the integer
compare macros.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As the test numbers are based on line numbers gaps without testcases are
to be avoided.
Instead use the already existing test condition logic to implement
conditional execution.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
pad_spc() is only ever used to print the status message of testcases.
The line size is always constant, the return value is never used and the
format string is never used as such.
Remove all the unneeded logic and simplify the API and its users.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
If "cond" is a multi-token statement the behavior of the preprocessor
will lead to the negation "!" to be only applied to the first token.
Although currently no test uses such multi-token conditions but it can
happen at any time.
Put braces around "cond" to ensure the negation works as expected.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
In commit 52e423f5b9 ("tools/nolibc: export environ as a weak symbol on i386")
and friends the asm startup logic was extended to directly populate the
"environ" array.
This makes it impossible for "environ" to be dropped by the linker.
Therefore also drop the other logic to handle non-present "environ".
Also add a testcase to validate the initialization of environ.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
a newline is inserted just before the test failures to avoid mixing the
test failures with the raw test log.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
two newlines are added around the test summary line to extrude the test
status.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
align the test values for different runs and different architectures.
Since the total number of tests is not bigger than 1000 currently, let's
align them with "%3d".
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
[wt: s/%03d/%3d/ as discussed with Zhangjin]
Link: https://lore.kernel.org/lkml/20230709185112.97236-1-falcon@tinylab.org/
Signed-off-by: Willy Tarreau <w@1wt.eu>
Let's count and print the total number of tests, now, the data of
passed, skipped and failed have the same format.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
one of the test status: success, warning and failure is printed to
summarize the passed, skipped and failed values.
- "success" means no skipped and no failed.
- "warning" means has at least one skipped and no failed.
- "failure" means all tests are failed.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702164358.GB16233@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
argv0 is readable and chmodable, let's use it for chmod test, but a safe
umask should be used, the readable and executable modes should be
reserved.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Since argv0 also works for CONFIG_PROC_FS=n, let's use it instead of
'/proc/self/exe'.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
'/proc/self/' is a good path which doesn't have stale time info but it
is only available for CONFIG_PROC_FS=y.
When CONFIG_PROC_FS=n, use argv0 instead of '/proc/self', use '/' for the
worst case.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The PWD environment variable has the path of the nolibc-test program,
the current path must be the same as it, otherwise, the test cases will
fail with relative path (e.g. ./nolibc-test).
Since only chdir_root really changes the current path, let's restore it
with the PWD environment variable.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The vfprintf test case require to open a temporary file to write, the
old memfd_create() method is perfect but has strong dependency on
MEMFD_CREATE and also TMPFS or HUGETLBFS (see fs/Kconfig):
config MEMFD_CREATE
def_bool TMPFS || HUGETLBFS
And from v6.2, MFD_NOEXEC_SEAL must be passed for the non-executable
memfd, otherwise, The kernel warning will be output to the test result
like this:
Running test 'vfprintf'
0 emptymemfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'init'
"" = "" [OK]
To avoid such warning and also to remove the MEMFD_CREATE dependency,
let's open a file from tmpfs directly.
The /tmp directory is used to detect the existing of tmpfs, if not
there, skip instead of fail.
And further, for pid == 1, the initramfs is loaded as ramfs, which can
be used as tmpfs, so, it is able to further remove TMPFS dependency too.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/9ad51430-b7c0-47dc-80af-20c86539498d@t-8ch.de
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
create a /tmp directory. If it succeeds, the directory is writable,
which is normally the case when booted from an initramfs anyway.
This will be used instead of procfs for some tests.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Link: https://lore.kernel.org/lkml/20230710050600.9697-1-falcon@tinylab.org/
[wt: removed the unneeded mount() call]
Signed-off-by: Willy Tarreau <w@1wt.eu>
For CONFIG_PROC_FS=n, the /proc is not mountable, but the /proc
directory has been created in the prepare() stage whenever /proc is
there or not.
so, the checking of /proc in the run_syscall() stage will be always true
and at last it will fail all of the procfs dependent test cases, which
deviates from the 'cond' check design of the EXPECT_xx macros, without
procfs, these test cases should be skipped instead of failed.
To solve this issue, one method is checking /proc/self instead of /proc,
another method is removing the /proc directory completely for
CONFIG_PROC_FS=n, we apply the second method to avoid misleading the
users.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
A new rmdir_blah test case is added to remove a non-existing /blah,
which expects failure with ENOENT errno.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
