Documentation/virt/kvm/locking.rst advises that kvm->lock should be
acquired outside vcpu->mutex and kvm->srcu. However, when KVM/RISC-V
handling SBI_EXT_HSM_HART_START, the lock ordering is vcpu->mutex,
kvm->srcu then kvm->lock.
Although the lockdep checking no longer complains about this after commit
f0f44752f5 ("rcu: Annotate SRCU's update-side lockdep dependencies"),
it's necessary to replace kvm->lock with a new dedicated lock to ensure
only one hart can execute the SBI_EXT_HSM_HART_START call for the target
hart simultaneously.
Additionally, this patch also rename "power_off" to "mp_state" with two
possible values. The vcpu->mp_state_lock also protects the access of
vcpu->mp_state.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-2-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
KVM userspace needs to be able to save and restore the steal-time
shared memory address. Provide the address through the get/set-one-reg
interface with two ulong-sized SBI STA extension registers (lo and hi).
64-bit KVM userspace must not set the hi register to anything other
than zero and is allowed to completely neglect saving/restoring it.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Some SBI extensions have state that needs to be saved / restored
when migrating the VM. Provide a get/set-one-reg register type
for SBI extension registers. Each SBI extension that uses this type
will have its own subtype. There are currently no subtypes defined.
The next patch introduces the first one.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add the files and functions needed to support the SBI STA
(steal-time accounting) extension. In the next patches we'll
complete the functions to fully enable SBI STA support.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
When an SBI extension cannot be enabled, that's a distinct state vs.
enabled and disabled. Modify enum kvm_riscv_sbi_ext_status to
accommodate it, which allows KVM userspace to tell the difference
in state too, as the SBI extension register will disappear when it
cannot be enabled, i.e. accesses to it return ENOENT. get-reg-list is
updated as well to only add SBI extension registers to the list which
may be enabled. Returning ENOENT for SBI extension registers which
cannot be enabled makes them consistent with ISA extension registers.
Any SBI extensions which were enabled by default are still enabled by
default, if they can be enabled at all.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
The frozen SBI v2.0 specification defines the SBI debug console
(DBCN) extension which replaces the legacy SBI v0.1 console
functions namely sbi_console_getchar() and sbi_console_putchar().
The SBI DBCN extension needs to be emulated in the KVM user-space
(i.e. QEMU-KVM or KVMTOOL) so we forward SBI DBCN calls from KVM
guest to the KVM user-space which can then redirect the console
input/output to wherever it wants (e.g. telnet, file, stdio, etc).
The SBI debug console is simply a early console available to KVM
guest for early prints and it does not intend to replace the proper
console devices such as 8250, VirtIO console, etc.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, all SBI extensions are enabled by default which is
problematic for SBI extensions (such as DBCN) which are forwarded
to the KVM user-space because we might have an older KVM user-space
which is not aware/ready to handle newer SBI extensions. Ideally,
the SBI extensions forwarded to the KVM user-space must be
disabled by default.
To address above, we allow certain SBI extensions to be disabled
by default so that KVM user-space must explicitly enable such
SBI extensions to receive forwarded calls from Guest VCPU.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
get_one_reg() and set_one_reg() are returning EINVAL errors for almost
everything: if a reg doesn't exist, if a reg ID is malformatted, if the
associated CPU extension that implements the reg isn't present in the
host, and for set_one_reg() if the value being written is invalid.
This isn't wrong according to the existing KVM API docs (EINVAL can be
used when there's no such register) but adding more ENOENT instances
will make easier for userspace to understand what went wrong.
Existing userspaces can be affected by this error code change. We
checked a few. As of current upstream code, crosvm doesn't check for any
particular errno code when using kvm_(get|set)_one_reg(). Neither does
QEMU. rust-vmm doesn't have kvm-riscv support yet. Thus we have a good
chance of changing these error codes now while the KVM RISC-V ecosystem
is still new, minimizing user impact.
Change all get_one_reg() and set_one_reg() implementations to return
-ENOENT at all "no such register" cases.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Sparse is giving a warning about vcpu_sbi_ext_pmu not being
defined, so add a definition to the relevant header to fix
the following:
arch/riscv/kvm/vcpu_sbi_pmu.c:81:37: warning: symbol 'vcpu_sbi_ext_pmu' was not declared. Should it be static?
Fixes: cbddc4c4cb ("RISC-V: KVM: Add SBI PMU extension support")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Rather than defaulting the status to available and allowing the user
to set availability, default to uninitialized and only allow the user
to set the status to unavailable. Then, when an extension is first
used, ensure it is available by invoking its probe function, if it
has one (an extension is assumed available if it doesn't have a probe
function). Checking the status in kvm_vcpu_sbi_find_ext() ensures
extension functions cannot be invoked when they're unavailable.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Change the boolean extension_disabled[] array to an array of enums,
ext_status[]. For now, the enum only has two states, which correspond
to the previous boolean states, so this patch has no intended
functional change. The next patch will add another state, expanding
the purpose of ext_status[].
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Make the name of the extension_disabled[] index more general in
order to expand its application.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
We add ONE_REG interface to enable/disable SBI extensions (just
like the ONE_REG interface for ISA extensions). This allows KVM
user-space to decide the set of SBI extension enabled for a Guest
and by default all SBI extensions are enabled.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI PMU extension allows KVM guests to configure/start/stop/query
about the PMU counters in virtualized enviornment as well.
In order to allow that, KVM implements the entire SBI PMU extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the SBI extension handle is expected to return Linux error code.
The top SBI layer converts the Linux error code to SBI specific error code
that can be returned to guest invoking the SBI calls. This model works
as long as SBI error codes have 1-to-1 mappings between them.
However, that may not be true always. This patch attempts to disassociate
both these error codes by allowing the SBI extension implementation to
return SBI specific error codes as well.
The extension will continue to return the Linux error specific code which
will indicate any problem *with* the extension emulation while the
SBI specific error will indicate the problem *of* the emulation.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Sparse complains about missing statics in the declarations of several
variables:
arch/riscv/kvm/vcpu_sbi_replace.c:38:37: warning: symbol 'vcpu_sbi_ext_time' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:73:37: warning: symbol 'vcpu_sbi_ext_ipi' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:126:37: warning: symbol 'vcpu_sbi_ext_rfence' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:170:37: warning: symbol 'vcpu_sbi_ext_srst' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:69:37: warning: symbol 'vcpu_sbi_ext_base' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:90:37: warning: symbol 'vcpu_sbi_ext_experimental' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:96:37: warning: symbol 'vcpu_sbi_ext_vendor' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_hsm.c:115:37: warning: symbol 'vcpu_sbi_ext_hsm' was not declared. Should it be static?
These variables are however used in vcpu_sbi.c where they are declared
as extern. Move them to kvm_vcpu_sbi.h which is handily already
included by the three other files.
Fixes: a046c2d857 ("RISC-V: KVM: Reorganize SBI code by moving SBI v0.1 to its own file")
Fixes: 5f862df558 ("RISC-V: KVM: Add v0.1 replacement SBI extensions defined in v0.2")
Fixes: 3e1d86569c ("RISC-V: KVM: Add SBI HSM extension in KVM")
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags
member that at the time was unused. Unfortunately this extensibility
mechanism has several issues:
- x86 is not writing the member, so it would not be possible to use it
on x86 except for new events
- the member is not aligned to 64 bits, so the definition of the
uAPI struct is incorrect for 32- on 64-bit userspace. This is a
problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately
usage of flags was only introduced in 5.18.
Since padding has to be introduced, place a new field in there
that tells if the flags field is valid. To allow further extensibility,
in fact, change flags to an array of 16 values, and store how many
of the values are valid. The availability of the new ndata field
is tied to a system capability; all architectures are changed to
fill in the field.
To avoid breaking compilation of userspace that was using the flags
field, provide a userspace-only union to overlap flags with data[0].
The new field is placed at the same offset for both 32- and 64-bit
userspace.
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220422103013.34832-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SBI v0.3 specification defines SRST (System Reset) extension which
provides a standard poweroff and reboot interface. This patch implements
SRST extension for the KVM Guest.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We rename kvm_sbi_system_shutdown() to kvm_riscv_vcpu_sbi_system_reset()
and move it to vcpu_sbi.c so that it can be shared by SBI v0.1 shutdown
and SBI v0.3 SRST extension.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The SBI experimental extension space is for temporary (or experimental)
stuff whereas SBI vendor extension space is for hardware vendor specific
stuff. Both these SBI extension spaces won't be standardized by the SBI
specification so let's blindly forward such SBI calls to the userspace.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
SBI HSM extension allows OS to start/stop harts any time. It also allows
ordered booting of harts instead of random booting.
Implement SBI HSM exntesion and designate the vcpu 0 as the boot vcpu id.
All other non-zero non-booting vcpus should be brought up by the OS
implementing HSM extension. If the guest OS doesn't implement HSM
extension, only single vcpu will be available to OS.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The SBI v0.2 contains some of the improved versions of required v0.1
extensions such as remote fence, timer and IPI.
This patch implements those extensions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
SBI v0.2 base extension defined to allow backward compatibility and
probing of future extensions. This is also the only mandatory SBI
extension that must be implemented by SBI implementors.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
With SBI v0.2, there may be more SBI extensions in future. It makes more
sense to group related extensions in separate files. Guest kernel will
choose appropriate SBI version dynamically.
Move the existing implementation to a separate file so that it can be
removed in future without much conflict.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The existing SBI specification impelementation follows v0.1
specification. The latest specification allows more scalability
and performance improvements.
Rename the existing implementation as v0.1 and provide a way
to allow future extensions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.
Let's bite the bullet and repaint all of it in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't use "/**" to begin a comment block for a non-kernel-doc comment.
Prevents this docs build warning:
vcpu_sbi.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Copyright (c) 2019 Western Digital Corporation or its affiliates.
Fixes: dea8ee31a0 ("RISC-V: KVM: Add SBI v0.1 support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Anup Patel <anup.patel@wdc.com>
Cc: kvm@vger.kernel.org
Cc: kvm-riscv@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Message-Id: <20211107034706.30672-1-rdunlap@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM host kernel is running in HS-mode needs so we need to handle
the SBI calls coming from guest kernel running in VS-mode.
This patch adds SBI v0.1 support in KVM RISC-V. Almost all SBI v0.1
calls are implemented in KVM kernel module except GETCHAR and PUTCHART
calls which are forwarded to user space because these calls cannot be
implemented in kernel space. In future, when we implement SBI v0.2 for
Guest, we will forward SBI v0.2 experimental and vendor extension calls
to user space.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
