Mitigate race between registering on wait list and receiving
AQ Response from FW.
ice_aq_prep_for_event() should be called before sending AQ command,
ice_aq_wait_for_event() should be called after sending AQ command,
to wait for AQ Response.
Please note, that this was found by reading the code,
an actual race has not yet materialized.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Expose struct ice_aq_task to callers,
what takes burden of memory ownership out from AQ-wait family of functions,
and reduces need for heap-based allocations.
Embed struct ice_rq_event_info event into struct ice_aq_task
(instead of it being a ptr) to remove some more code from the callers.
Subsequent commit will improve more based on this one.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Allow task's event buffer to be filled also in the case that it's size
is exactly the size of the message.
Fixes: d69ea414c9 ("ice: implement device flash update via devlink")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes: fbc7b27af0 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As some cards load FW from external sources, we have to wait
to be sure that FW is ready before setting link up.
Add check and wait for FW readiness
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
During qdisc create/delete, it is necessary to rebuild the queue
of VSIs. An error occurred because the VSIs created by RDMA were
still active.
Added check if RDMA is active. If yes, it disallows qdisc changes
and writes a message in the system logs.
Fixes: 348048e724 ("ice: Implement iidc operations")
Signed-off-by: Rafal Rogalski <rafalx.rogalski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171243.2446101-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add code to rebuild the LAG resources when rebuilding the state of the
interface after a reset.
Also added in a function for building per-queue information into the buffer
used to configure VF queues for LAG fail-over. This improves code reuse.
Due to differences in timing per interface for recovering from a reset, add
in the ability to retry on non-local dependencies where needed.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the defines, fields, and detection code for FW support of LAG for
SRIOV. Also exposes some previously static functions to allow access
in the lag code.
Clean up code that is unused or not needed for LAG support. Also add
an ordered workqueue for processing LAG events.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
With this patch, ice driver is able to track if the port
representors or uplink port were added to the linux bridge in
switchdev mode. Listen for NETDEV_CHANGEUPPER events in order to
detect this. ice_esw_br data structure reflects the linux bridge
and stores all the ports of the bridge (ice_esw_br_port) in
xarray, it's created when the first port is added to the bridge and
freed once the last port is removed. Note that only one bridge is
supported per eswitch.
Bridge port (ice_esw_br_port) can be either a VF port representor
port or uplink port (ice_esw_br_port_type). In both cases bridge port
holds a reference to the VSI, VF's VSI in case of the PR and uplink
VSI in case of the uplink. VSI's index is used as an index to the
xarray in which ports are stored.
Add a check which prevents configuring switchdev mode if uplink is
already added to any bridge. This is needed because we need to listen
for NETDEV_CHANGEUPPER events to record if the uplink was added to
the bridge. Netdevice notifier is registered after eswitch mode
is changed to switchdev.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Don't allow to change promisc mode in switchdev mode.
When switchdev is configured, PF netdev is set to be a
default VSI. This is needed for the slow-path to work correctly.
All the unmatched packets will be directed to PF netdev.
It is possible that this setting might be overwritten by
ndo_set_rx_mode. Prevent this by checking if switchdev is
enabled in ice_set_rx_mode.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----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=VRCb
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-07-19
We've added 45 non-merge commits during the last 3 day(s) which contain
a total of 71 files changed, 7808 insertions(+), 592 deletions(-).
The main changes are:
1) multi-buffer support in AF_XDP, from Maciej Fijalkowski,
Magnus Karlsson, Tirthendu Sarkar.
2) BPF link support for tc BPF programs, from Daniel Borkmann.
3) Enable bpf_map_sum_elem_count kfunc for all program types,
from Anton Protopopov.
4) Add 'owner' field to bpf_rb_node to fix races in shared ownership,
Dave Marchevsky.
5) Prevent potential skb_header_pointer() misuse, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
bpf, net: Introduce skb_pointer_if_linear().
bpf: sync tools/ uapi header with
selftests/bpf: Add mprog API tests for BPF tcx links
selftests/bpf: Add mprog API tests for BPF tcx opts
bpftool: Extend net dump with tcx progs
libbpf: Add helper macro to clear opts structs
libbpf: Add link-based API for tcx
libbpf: Add opts-based attach/detach/query API for tcx
bpf: Add fd-based tcx multi-prog infra with link support
bpf: Add generic attach/detach/query API for multi-progs
selftests/xsk: reset NIC settings to default after running test suite
selftests/xsk: add test for too many frags
selftests/xsk: add metadata copy test for multi-buff
selftests/xsk: add invalid descriptor test for multi-buffer
selftests/xsk: add unaligned mode test for multi-buffer
selftests/xsk: add basic multi-buffer test
selftests/xsk: transmit and receive multi-buffer packets
xsk: add multi-buffer documentation
i40e: xsk: add TX multi-buffer support
ice: xsk: Tx multi-buffer support
...
====================
Link: https://lore.kernel.org/r/20230719175424.75717-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of this patch is about actually supporting XDP_TX action. Pure Tx
ZC support is only about looking at XDP_PKT_CONTD presence at options
field and based on that generating EOP bit on Tx HW descriptor. This is
that simple due to the implementation on
xsk_tx_peek_release_desc_batch() where we are making sure that last
produced descriptor is an EOP one.
Overwrite xdp_zc_max_segs with a value that defines max scatter-gatter
count on Tx side that HW can handle.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-16-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Configuring tx_maxrate via sysfs interface
/sys/class/net/eth0/queues/tx-1/tx_maxrate was not working when
TCs are configured because always main VSI was being used. Fix by
using correct VSI in ice_set_tx_maxrate when TCs are configured.
Fixes: 1ddef455f4 ("ice: Add NDO callback to set the maximum per-queue bitrate")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove incorrect check in ice_validate_mqprio_opt() that limits
filter configuration when sum of max_rates of all TCs exceeds
the link speed. The max rate of each TC is unrelated to value
used by other TCs and is valid as long as it is less than link
speed.
Fixes: fbc7b27af0 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_change_mtu() is currently using a separate ice_down() and ice_up()
calls to reflect changed MTU. ice_down_up() serves this purpose, so do
the refactoring here.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently ice driver's .ndo_bpf callback brings interface down and up
independently of XDP resources' presence. This is only needed when
either these resources have to be configured or removed. It means that
if one is switching XDP programs on-the-fly with running traffic,
packets will be dropped.
To avoid this, compare early on ice_xdp_setup_prog() state of incoming
bpf_prog pointer vs the bpf_prog pointer that is already assigned to
VSI. Do the swap in case VSI has bpf_prog and incoming one are non-NULL.
Lastly, while at it, put old bpf_prog *after* the update of Rx ring's
bpf_prog pointer. In theory previous code could expose us to a state
where Rx ring's bpf_prog would still be referring to old_prog that got
released with earlier bpf_prog_put().
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The check has been moved to core. The ndo_set_mac_address callback
is not being called with new MAC address equal to the old one anymore.
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice driver uses threaded IRQ for managing Tx timestamps via the
devm_request_threaded_irq() interface. The ice_misc_intr() handler function
is responsible for processing the hard interrupt context, and can wake the
ice_misc_intr_thread_fn() by returning IRQ_WAKE_THREAD.
The request_threaded_irq() function comment says:
@handler is still called in hard interrupt context and has to check
whether the interrupt originates from the device. If yes, it needs to
disable the interrupt on the device and return IRQ_WAKE_THREAD which will
wake up the handler thread and run the @thread_fn.
We currently re-enable the Other Interrupt Cause Register (OCIR) at the end of
ice_misc_intr(). In practice, this seems to be ok, but it can make
communicating between the handler function and the thread function
difficult. This is because the interrupt can trigger again while the thread
function is still processing.
Move the OICR update to the end of the thread function, leaving the other
interrupt cause disabled in hardware until we complete one pass of the
thread function. This prevents the miscellaneous interrupt from firing
until after we finish the thread function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In ice_misc_intr_thread_fn(), if we do not complete all Tx timestamp work,
the thread function will poll continuously forever.
For E822 hardware, this wastes time as the return value from
ice_ptp_process_ts() is accurate and always reports correctly that the PHY
actually has new timestamp data.
In addition, if we receive enough timestamps with the right pacing, we may
never exit this polling. Should this occur, other tasks handled by the
ice_misc_intr_thread_fn() will never be processed.
Fix this by instead writing to PFINT_OICR, causing an emulated interrupt to
be triggered immediately. This does take slightly more processing than just
re-checking the timestamps. However, it allows all of the other interrupt
causes a chance to be processed first in the hard IRQ function.
Note that the OICR interrupt is configured to be throttled to no more than
once every 124 microseconds. This gives an effective interrupt rate of
~8000 interrupts per second. This should thus not cause a significant
increase in overall CPU usage when compared to sleeping.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix the buffer leak that occurs while switching
the port up and down with traffic and XDP by
checking for an active XDP program and freeing all empty TX buffers.
Fixes: efc2214b60 ("ice: Add support for XDP")
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_ptp_process_ts() function and its various helper functions return a
boolean value indicating whether any work is remaining. This use of a
boolean has grown confusing as we have multiple helpers that pass status
between each other. Readers must be aware of what "true" and "false" mean,
and it is very easy to get their meaning inverted. The names of the
functions are not standard "yes/no" questions, which is the best practice
for boolean returns.
Replace this use of an enumeration with a custom type, enum
ice_tx_tstamp_work. This enumeration clearly indicates whether all work is
done, or if more work is pending.
To aid in readability, factor the actual list iteration and processing out
into ice_ptp_process_tx_tstamp(), making it void. Then call this in
ice_ptp_tx_tstamp() ensuring that we always check the Tracker list at the
end when determining the appropriate return value.
Now the return value is an explicit name instead of the true or false
value. This is easier to follow and makes reading the resulting callers
much simpler.
In addition, this paves the way for future work to allow E822 hardware to
process timestamps for all functions using a single interrupt on the clock
owning PF.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor the ice_misc_intr() function to always return IRQ_WAKE_THREAD, and
schedule the service task during the soft IRQ thread function instead of at
the end of the hard IRQ handler.
Remove the duplicate call to ice_service_task_schedule() that happened when
we got a PCI exception.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_ptp_extts_work() and ice_ptp_periodic_work() functions are both
scheduled on the same kthread worker, pf.ptp.kworker. The
ice_ptp_periodic_work() function sends to the firmware to interact with the
PHY, and must block to wait for responses.
This can cause delay in responding to the PFINT_OICR_TSYN_EVNT interrupt
cause, ultimately resulting in disruption to processing an input signal of
the frequency is high enough. In our testing, even 100 Hz signals get
disrupted.
Fix this by instead processing the signal inside the miscellaneous
interrupt thread prior to handling Tx timestamps.
Use atomic bits in a new pf->misc_thread bitmap in order to safely
communicate which tasks require processing within the
ice_misc_intr_thread_fn(). This ensures the communication of desired tasks
from the ice_misc_intr() are correctly processed without racing even in the
event that the interrupt triggers again before the thread function exits.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently driver can only allocate interrupt vectors during init phase by
calling pci_alloc_irq_vectors. Change that and make use of new
pci_msix_alloc_irq_at/pci_msix_free_irq API and enable to allocate and free
more interrupts after MSIX has been enabled. Since not all platforms
supports dynamic allocation, check it with pci_msix_can_alloc_dyn.
Extend the tracker to keep track how many interrupts are allocated
initially so when all such vectors are already used, additional interrupts
are automatically allocated dynamically. Remember each interrupt allocation
method to then free appropriately. Since some features may require
interrupts allocated dynamically add appropriate VSI flag and take it into
account when allocating new interrupt.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently interrupt allocations, depending on a feature are distributed
in batches. Also, after allocation there is a series of operations that
distributes per irq settings through that batch of interrupts.
Although driver does not yet support dynamic interrupt allocation, keep
allocated interrupts in a pool and add allocation abstraction logic to
make code more flexible. Keep per interrupt information in the
ice_q_vector structure, which yields ice_vsi::base_vector redundant.
Also, as a result there are a few functions that can be removed.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move away from using pci_enable_msix_range/pci_disable_msix and use
pci_alloc_irq_vectors/pci_free_irq_vectors instead.
As a result stop tracking msix_entries since with newer API entries are
handled by MSIX core. However, due to current design of communication
with RDMA driver which accesses ice_pf::msix_entries directly, keep
using the array just for RDMA driver use.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, driver gets interrupt number directly from ice_pf::msix_entries
array. Use helper function dedicated to do just that.
While at it use a variable to store interrupt number in
ice_free_irq_msix_misc instead of calling the helper function twice.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Keep interrupt handling code in a dedicated file. This helps keep driver
structured better and prepares for more functionality added to this file.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Filters shouldn't be removed in VSI rebuild path. Removing them on PF
VSI results in no rule for PF MAC after changing for example queues
amount.
Remove all filters only in the VSI remove flow. As unload should also
cause the filter to be removed introduce, a new function ice_stop_eth().
It will unroll ice_start_eth(), so remove filters and close VSI.
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
RDMA is not supported in ice on a PF that has been added to a bonded
interface. To enforce this, when an interface enters a bond, we unplug
the auxiliary device that supports RDMA functionality. This unplug
currently happens in the context of handling the netdev bonding event.
This event is sent to the ice driver under RTNL context. This is causing
a deadlock where the RDMA driver is waiting for the RTNL lock to complete
the removal.
Defer the unplugging/re-plugging of the auxiliary device to the service
task so that it is not performed under the RTNL lock context.
Cc: stable@vger.kernel.org # 6.1.x
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/
Fixes: 5cb1ebdbc4 ("ice: Fix race condition during interface enslave")
Fixes: 4eace75e08 ("RDMA/irdma: Report the correct link speed")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main loop in __ice_clean_ctrlq first checks if a VF might be malicious
before calling ice_vc_process_vf_msg(). This results in duplicate code in
both functions to obtain a reference to the VF, and exports the
ice_is_malicious_vf() from ice_virtchnl.c unnecessarily.
Refactor ice_is_malicious_vf() to be a static function that takes a pointer
to the VF. Call this in ice_vc_process_vf_msg() just after we obtain a
reference to the VF by calling ice_get_vf_by_id.
Pass the mailbox data from the __ice_clean_ctrlq function into
ice_vc_process_vf_msg() instead of calling ice_is_malicious_vf().
This reduces the number of exported functions and avoids the need to obtain
the VF reference twice for every mailbox message.
Note that the state check for ICE_VF_STATE_DIS is kept in
ice_is_malicious_vf() and we call this before checking that state in
ice_vc_process_vf_msg. This is intentional, as we stop responding to VF
messages from a VF once we detect that it may be overflowing the mailbox.
This ensures that we continue to silently ignore the message as before
without responding via ice_vc_send_msg_to_vf().
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_is_malicious_vf() function takes information about the current
state of the mailbox during a single interrupt. This information includes
the number of messages processed so far, as well as the number of pending
messages not yet processed.
A future refactor is going to make ice_vc_process_vf_msg() call
ice_is_malicious_vf() instead of having it called separately in ice_main.c
This change will require passing all the necessary arguments into
ice_vc_process_vf_msg().
To make this simpler, have the main loop fill in the struct ice_mbx_data
and pass that rather than passing in the num_msg_proc and num_msg_pending.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that we no longer depend on the number of VFs being allocated, we can
move the ice_mbx_init_snapshot function earlier. This will be required by
Scalable IOV as we will not be calling ice_sriov_configure for Scalable
VFs.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-14 (ice)
This series contains updates to ice driver only.
Karol extends support for GPIO pins to E823 devices.
Daniel Vacek stops processing of PTP packets when link is down.
Pawel adds support for BIG TCP for IPv6.
Tony changes return type of ice_vsi_realloc_stat_arrays() as it always
returns success.
Zhu Yanjun updates kdoc stating supported TLVs.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Mention CEE DCBX in code comment
ice: Change ice_vsi_realloc_stat_arrays() to void
ice: add support BIG TCP on IPv6
ice/ptp: fix the PTP worker retrying indefinitely if the link went down
ice: Add GPIO pin support for E823 products
====================
Link: https://lore.kernel.org/r/20230214213003.2117125-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable sending BIG TCP packets on IPv6 in the ice driver using generic
ipv6_hopopt_jumbo_remove helper for stripping HBH header.
Tested:
netperf -t TCP_RR -H 2001:db8:0:f101::1 -- -r80000,80000 -O MIN_LATENCY,P90_LATENCY,P99_LATENCY,TRANSACTION_RATE
Tested on two different setups. In both cases, the following settings were
applied after loading the changed driver:
ip link set dev enp175s0f1np1 gso_max_size 130000
ip link set dev enp175s0f1np1 gro_max_size 130000
ip link set dev enp175s0f1np1 mtu 9000
First setup:
Before:
Minimum 90th 99th Transaction
Latency Percentile Percentile Rate
Microseconds Latency Latency Tran/s
Microseconds Microseconds
134 279 410 3961.584
After:
Minimum 90th 99th Transaction
Latency Percentile Percentile Rate
Microseconds Latency Latency Tran/s
Microseconds Microseconds
135 178 216 6093.404
The other setup:
Before:
Minimum 90th 99th Transaction
Latency Percentile Percentile Rate
Microseconds Latency Latency Tran/s
Microseconds Microseconds
218 414 478 2944.765
After:
Minimum 90th 99th Transaction
Latency Percentile Percentile Rate
Microseconds Latency Latency Tran/s
Microseconds Microseconds
146 238 266 4700.596
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There was a problem reported to us where the addition of a VF with an IPv6
address ending with a particular sequence would cause the parent device on
the PF to no longer be able to respond to neighbor discovery packets.
In this case, we had an ovs-bridge device living on top of a VLAN, which
was on top of a PF, and it would not be able to talk anymore (the neighbor
entry would expire and couldn't be restored).
The root cause of the issue is that if the PF is asked to be in IFF_PROMISC
mode (promiscuous mode) and it had an ipv6 address that needed the
33:33:ff:00:00:04 multicast address to work, then when the VF was added
with the need for the same multicast address, the VF would steal all the
traffic destined for that address.
The ice driver didn't auto-subscribe a request of IFF_PROMISC to the
"multicast replication from other port's traffic" meaning that it won't get
for instance, packets with an exact destination in the VF, as above.
The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04,
results in no packets for that multicast address making it to the PF (which
is in promisc but NOT "multicast replication").
The fix is to enable "multicast promiscuous" whenever the driver is asked
to enable IFF_PROMISC, and make sure to disable it when appropriate.
Fixes: e94d447866 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+bZrwAKCRDbK58LschI
gzi4AP4+TYo0jnSwwkrOoN9l4f5VO9X8osmj3CXfHBv7BGWVxAD/WnvA3TDZyaUd
agIZTkRs6BHF9He8oROypARZxTeMLwM=
=nO1C
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad2 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When hardware is reset, the VF relies on the VFGEN_RSTAT register to detect
when the VF is finished resetting. This is a tri-state register where 0
indicates a reset is in progress, 1 indicates the hardware is done
resetting, and 2 indicates that the software is done resetting.
Currently the PF driver relies on the device hardware resetting VFGEN_RSTAT
when a global reset occurs. This works ok, but it does mean that the VF
might not immediately notice a reset when the driver first detects that the
global reset is occurring.
This is also problematic for Scalable IOV, because there is no read/write
equivalent VFGEN_RSTAT register for the Scalable VSI type. Instead, the
Scalable IOV VFs will need to emulate this register.
To support this, introduce a new VF operation, clear_reset_state, which is
called when the PF driver first detects a global reset. The Single Root IOV
implementation can just write to VFGEN_RSTAT to ensure it's cleared
immediately, without waiting for the actual hardware reset to begin. The
Scalable IOV implementation will use this as part of its tracking of the
reset status to allow properly reporting the emulated VFGEN_RSTAT to the VF
driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
