The clk_alpha_pll_stromer_set_rate() function writes inproper
values into the ALPHA_VAL{,_U} registers which results in wrong
clock rates when the alpha value is used.
The broken behaviour can be seen on IPQ5018 for example, when
dynamic scaling sets the CPU frequency to 800000 KHz. In this
case the CPU cores are running only at 792031 KHz:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
800000
# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
792031
This happens because the function ignores the fact that the alpha
value calculated by the alpha_pll_round_rate() function is only
32 bits wide which must be extended to 40 bits if it is used on
a hardware which supports 40 bits wide values.
Extend the clk_alpha_pll_stromer_set_rate() function to convert
the alpha value to 40 bits before wrinting that into the registers
in order to ensure that the hardware really uses the requested rate.
After the change the CPU frequency is correct:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
800000
# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
800000
Cc: stable@vger.kernel.org
Fixes: e47a4f55f2 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move the locally defined Huayra register map to 'clk_alpha_pll_regs'
in order to allow using that by other drivers, like the clk-cbf-8996.
No functional changes.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-2-eddbf617f0c8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The register offset arrays are ordered based on the register
offsets for all PLLs but the Stromer. For consistency, reorder
the Stromer specific array as well.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240311-alpha-pll-stromer-cleanup-v1-2-f7c0c5607cca@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The offset of the CONFIG_CTL_U register defined for the Stromer
PLL is wrong. It is not aligned on a 4 bytes boundary which might
causes errors in regmap operations.
Maybe the intention behind of using the 0xff value was to indicate
that the register is not implemented in the PLL, but this is not
verified anywhere in the code. Moreover, this value is not used
even in other register offset arrays despite that those PLLs also
have unimplemented registers.
Additionally, on the Stromer PLLs the current code only touches
the CONFIG_CTL_U register if the result of pll_has_64bit_config()
is true which condition is not affected by the change.
Due to the reasons above, simply remove the CONFIG_CTL_U entry
from the Stromer specific array.
Fixes: e47a4f55f2 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240311-alpha-pll-stromer-cleanup-v1-1-f7c0c5607cca@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PLL0 is configured by the bootloader and is the parent of the
mdp_clk_src. The Trion implementation of the configure function is
already skipping this step if the PLL is enabled, so lets extend the
same behavior to Lucid Evo variant.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240418-clk-qcom-lucid-evo-skip-configuring-enabled-v1-1-caede5f1c7a3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stromer plus APSS PLL does not support dynamic frequency scaling.
To switch between frequencies, we have to shut down the PLL,
configure the L and ALPHA values and turn on again. So introduce the
separate set of ops for Stromer Plus PLL.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/2affa6c63ff0c4342230623a7d4eef02ec7c02d4.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Lucid ole pll has as extra RINGOSC_CAL_L field in L register in
addition to the fields that are part of lucid evo pll, hence add
support for lucid ole pll configure function to configure the ole plls.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-3-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The "vanilla" Alpha PLL configs are sometimes provided with an intention
to only update certain bits of th register.
Do so if a mask is found.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Iskren Chernev <me@iskren.info>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601-topic-alpha_ctl-v1-1-b6a932dfcf68@linaro.org
The lucid ole pll reuses lucid evo ops but it has an additional test
control register which is required to be programmed, add support to
program the same.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524145203.13153-2-quic_jkona@quicinc.com
Add the support for stromer plus pll, which is found on the IPQ5332
SoCs. Programming sequence is same as the stromer pll, so we can re-use
the same.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307062232.4889-3-quic_kathirav@quicinc.com
Add programming sequence support for managing the Stromer
PLLs.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Co-developed-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307062232.4889-2-quic_kathirav@quicinc.com
Program PLL_TEST and PLL_TEST_U registers if required by the pll
configuration.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113120544.59320-3-dmitry.baryshkov@linaro.org
Add a LUCID_OLE PLL type for SM8550 SoC from Qualcomm.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130112852.2977816-5-abel.vesa@linaro.org
The qcom2260 and sm6115 GCC drivers use a common modified DEFAULT and
BRAMMO alpha pll offsets. Move these common offsets to the shared place
to avoid duplication. The new layouts have a suffix EVO similar to LUCID
and RIVIAN.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220830075620.974009-4-iskren.chernev@gmail.com
PLLs can be kept in standby (default configuration) or in off mode
when disabled during power collapse. Hence add support for pll
disable off mode for lucid evo PLL.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908222850.3552050-3-dmitry.baryshkov@linaro.org
Add and export Rivian EVO PLL configuration and control functions to
clock controller drivers, the PLL is used by SM8450 camera clock
controller.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062739.2757912-1-vladimir.zapolskiy@linaro.org
Add controls for Lucid EVO PLL configuration and export control functions
to clock controller drivers, the PLL is used by Qualcomm SM8450 camera
and display clock controllers.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062729.2757893-1-vladimir.zapolskiy@linaro.org
After merging lucid and trion pll functions in commit 0b01489475
("clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid")
the function clk_trion_pll_configure() is left with an old description
header, which results in a W=2 compile time warning, fix it.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062711.2757855-1-vladimir.zapolskiy@linaro.org
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support. Per usual (or maybe just recent trends), Qualcomm gains a
handful of SoC drivers additions and has the largest diffstat. After
that there are quite a few updates to the Allwinner (sunxi) drivers to
support modular drivers and Renesas is heavily updated to add more
support for various clks. Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock
drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers
-----BEGIN PGP SIGNATURE-----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=jB+l
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have a couple patches in the framework core this time around but
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support.
Per usual (or maybe just recent trends), Qualcomm gains a handful of
SoC drivers additions and has the largest diffstat. After that there
are quite a few updates to the Allwinner (sunxi) drivers to support
modular drivers and Renesas is heavily updated to add more support for
various clks.
Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in
drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2
clock drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits)
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
clk: mediatek: add mt7986 clock support
clk: mediatek: add mt7986 clock IDs
dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: ingenic: Add MDMA and BDMA clocks
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
clk: bm1880: remove kfrees on static allocations
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
clk: Enable/Disable runtime PM for clk_summary
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
...
This introduces bindings and drivers for the global clock controllers
found in SDX65, SM8450 and MSM8976, as well as RPMh clock support for
SDX65 and SM8450.
It cleans up the SMD RPM clock driver and it adds includes for
clk-provider.h throughout the clock providers that was lacking this.
-----BEGIN PGP SIGNATURE-----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=PGNc
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-for-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull qcom clk driver updates from Bjorn Andersson:
This introduces bindings and drivers for the global clock controllers
found in SDX65, SM8450 and MSM8976, as well as RPMh clock support for
SDX65 and SM8450.
It cleans up the SMD RPM clock driver and it adds includes for
clk-provider.h throughout the clock providers that was lacking this.
* tag 'qcom-clk-for-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
clk: qcom: turingcc-qcs404: explicitly include clk-provider.h
clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h
clk: qcom: mmcc-apq8084: explicitly include clk-provider.h
clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h
clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h
clk: qcom: gcc-sm6350: explicitly include clk-provider.h
clk: qcom: gcc-msm8994: explicitly include clk-provider.h
clk: qcom: gcc-sm8350: explicitly include clk-provider.h
clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver
dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller
clk: qcom: Add clock driver for SM8450
clk: qcom: Add SDX65 GCC support
clk: qcom: Add LUCID_EVO PLL type for SDX65
dt-bindings: clock: Add SM8450 GCC clock bindings
dt-bindings: clock: Add SDX65 GCC clock bindings
clk: qcom: rpmh: add support for SM8450 rpmh clocks
dt-bindings: clock: Add RPMHCC bindings for SM8450
clk: qcom: smd-rpm: Drop binary value handling for buffered clock
clk: qcom: smd-rpm: Drop the use of struct rpm_cc
clk: qcom: smd-rpm: Drop MFD qcom-rpm reference
...
PLL poll for lock detection can take more than 100us for certain type
of Lucid PLLs and also the new PLLs types(Lucid EVO), thus update to 200us.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In the event that the bootloader has configured the Trion PLL as source
for the display clocks, e.g. for the continuous splashscreen, then there
will also be RCGs that are clocked by this instance.
Reconfiguring, and in particular disabling the output of, the PLL will
cause issues for these downstream RCGs and has been shown to prevent
them from being re-parented.
Follow downstream and skip configuration if it's determined that the PLL
is already running.
Fixes: 59128c20a6 ("clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211123162508.153711-1-bjorn.andersson@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Caught this when looking at alpha-pll code. Untested but it is clear that
this was intended to write to PLL_CAL_L_VAL and not PLL_ALPHA_VAL.
Fixes: 691865bad6 ("clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210609022852.4151-1-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lucid 5LPE is a slightly different Lucid PLL with different offsets and
porgramming sequence so add support for these
Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
[vkoul: rebase and tidy up for upstream]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210127070811.152690-4-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Trion 5LPE set rate uses code similar to alpha_pll_trion_set_rate() but
with different registers. Modularize these by moving out latch and latch
ack bits so that we can reuse the function.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127070811.152690-3-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Driver uses regval variable for holding register values, replace with a
shorter one val
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127070811.152690-2-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Introduce clk_alpha_pll_write_config and alpha_pll_check_rate_margin
helper functions to be across PLL configure functions and PLL set rate
functions.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1602873815-1677-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lucid PCAL_DONE is different from trion.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-5-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixed ops were already identical, this adds support for non-fixed ops by
sharing between trion and lucid.
This also changes the names for trion ops to be consistent with the rest.
Note LUCID_PCAL_DONE is renamed to TRION_PCAL_DONE because it is wrong for
lucid, LUCID_PCAL_DONE should be BIT(27). Next patch will address this.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-4-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
0x44 isn't a register offset, it is the value that goes into CAL_L_VAL.
Fixes: 548a909597 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-3-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Remove duplicate function for calculating the round rate of PLL and also
update the trion pll ops to use the common function.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20200224045003.3783838-3-vkoul@kernel.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The PLL run and standby modes are similar across the PLLs, thus rename
them to common names and update the use of these.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20200224045003.3783838-2-vkoul@kernel.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
I recently ran across this printk error message spewing in my logs
Call set rate on the PLL with rounded rates!
and I had no idea what clk that was or what rate was failing to round
properly. Make the printk more informative by telling us what went wrong
and also add the name of the clk that's failing to change rate.
Furthermore, update the other printks in this file with the clk name
each time so we know what clk we're talking about.
Cc: Taniya Das <tdas@codeaurora.org>
Cc: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lkml.kernel.org/r/20200205065421.9426-1-swboyd@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In the cases where the PLL is not calibrated the PLL could fail to lock.
Add support for prepare ops which would take care of the same.
Fabia PLL user/test control registers might required to be configured, so
add support for configuring them.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1573812304-24074-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add programming sequence support for managing the Trion
PLLs.
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
[vkoul: port to upstream and tidy-up
use upstream way of specifying PLLs]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20190722074348.29582-4-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We want users to code properly and fix the post_div_table missing and
not rely on core to check. So remove the post_div_table check.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lkml.kernel.org/r/20190722074348.29582-3-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit 8f9fab480c ("linux/kernel.h: fix overflow for
DIV_ROUND_UP_ULL") fixed the overflow for DIV_ROUND_UP_ULL, so we no
longer need the cast for DIV_ROUND_UP_ULL, so remove the unnecessary
u64 casts.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20190722074348.29582-2-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This is used by the QCS404 GCC driver, export it to allow that driver to
be compiled as a module..
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
SPDX headers updated for common/branch/pll/regmap files.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This is used by the video clk driver on sdm845 and that's a module.
Export it to prevent module build failures.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
