Add and use the new helper function adf_get_etr_base() which retrieves
the virtual address of the ring bar.
This will be used extensively when adding support for Live Migration.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose the `auto_reset` sysfs attribute to configure the driver to reset
the device when a fatal error is detected.
When auto reset is enabled, the driver resets the device when it detects
either an heartbeat failure or a fatal error through an interrupt.
This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a Physical Function (PF) is reset, SR-IOV gets disabled, making the
associated Virtual Functions (VFs) unavailable. Even after reset and
using pci_restore_state, VFs remain uncreated because the numvfs still
at 0. Therefore, it's necessary to reconfigure SR-IOV to re-enable VFs.
This commit introduces the ADF_SRIOV_ENABLED configuration flag to cache
the SR-IOV enablement state. SR-IOV is only re-enabled if it was
previously configured.
This commit also introduces a dedicated workqueue without
`WQ_MEM_RECLAIM` flag for enabling SR-IOV during Heartbeat and CPM error
resets, preventing workqueue flushing warning.
This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add error notify method to report a fatal error event to all the
subsystems registered. In addition expose an API,
adf_notify_fatal_error(), that allows to trigger a fatal error
notification asynchronously in the context of a workqueue.
This will be invoked when a fatal error is detected by the ISR or
through Heartbeat.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a mechanism that allows to inject a heartbeat error for testing
purposes.
A new attribute `inject_error` is added to debugfs for each QAT device.
Upon a write on this attribute, the driver will inject an error on the
device which can then be detected by the heartbeat feature.
Errors are breaking the device functionality thus they require a
device reset in order to be recovered.
This functionality is not compiled by default, to enable it
CRYPTO_DEV_QAT_ERROR_INJECTION must be set.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The admin API is growing and deserves its own include.
Move it from adf_common_drv.h to adf_admin.h.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the function adf_get_aram_base() which allows to return the
base address of the aram bar.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Compress and Verify (CnV) feature check and ensures data integrity
in the compression operation. The implementation of CnV keeps a record
of the CnV errors that have occurred since the driver was loaded.
Expose CnV error stats by providing the "cnv_errors" file under
debugfs. This includes the number of errors detected up to now and
the type of the last error. The error count is provided on a per
Acceleration Engine basis and it is reset every time the driver is loaded.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT devices implement a mechanism that allows them to go autonomously
to a low power state depending on the load.
Expose power management info by providing the "pm_status" file under
debugfs. This includes PM state, PM event log, PM event counters, PM HW
CSRs, per-resource type constrain counters and per-domain power gating
status specific to the QAT device.
This information is retrieved from (1) the FW by means of
ICP_QAT_FW_PM_INFO command, (2) CSRs and (3) counters collected by the
device driver.
In addition, add logic to keep track and report power management event
interrupts and acks/nacks sent to FW to allow/prevent state transitions.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_dev_init(), through the subsystem qat_compression,
populates the list of list of compression instances
accel_dev->compression_list. If the list of instances is not empty,
the function adf_dev_start() will then call qat_compression_registers()
register the compression algorithms into the crypto framework.
If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of compression algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_compression.c to get
to a negative value.
Add a new state, ADF_STATUS_COMPRESSION_ALGS_REGISTERED, which tracks
if the compression algorithms are registered into the crypto framework.
Then use this to unregister the algorithms if such flag is set. This
ensures that the compression algorithms are only unregistered if
previously registered.
Fixes: 1198ae56c9 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_dev_init(), through the subsystem qat_crypto, populates
the list of list of crypto instances accel_dev->crypto_list.
If the list of instances is not empty, the function adf_dev_start() will
then call qat_algs_registers() and qat_asym_algs_register() to register
the crypto algorithms into the crypto framework.
If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of crypto algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_algs.c and
qat_asym_algs.c to get to a negative value.
Add a new state, ADF_STATUS_CRYPTO_ALGS_REGISTERED, which tracks if the
crypto algorithms are registered into the crypto framework. Then use
this to unregister the algorithms if such flag is set. This ensures that
the crypto algorithms are only unregistered if previously registered.
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Under some circumstances, firmware in the QAT devices could become
unresponsive. The Heartbeat feature provides a mechanism to detect
unresponsive devices.
The QAT FW periodically writes to memory a set of counters that allow
to detect the liveness of a device. This patch adds logic to enable
the reporting of those counters, analyze them and report if a device
is alive or not.
In particular this adds
(1) heartbeat enabling, reading and detection logic
(2) reporting of heartbeat status and configuration via debugfs
(3) documentation for the newly created sysfs entries
(4) configuration of FW settings related to heartbeat, e.g. tick period
(5) logic to convert time in ms (provided by the user) to clock ticks
This patch introduces a new folder in debugfs called heartbeat with the
following attributes:
- status
- queries_sent
- queries_failed
- config
All attributes except config are reading only. In particular:
- `status` file returns 0 when device is operational and -1 otherwise.
- `queries_sent` returns the total number of heartbeat queries sent.
- `queries_failed` returns the total number of heartbeat queries failed.
- `config` allows to adjust the frequency at which the firmware writes
counters to memory. This period is given in milliseconds and it is
fixed for GEN4 devices.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT hardware does not expose a mechanism to report its clock
frequency. This is required to implement the Heartbeat feature.
Add a clock measuring algorithm that estimates the frequency by
comparing the internal timestamp counter incremented by the firmware
with the time measured by the kernel.
The frequency value is only used internally and not exposed to
the user.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The power management feature in QAT 4xxx devices can disable clock
sources used to implement timers. Because of that, the firmware needs to
get an external reliable source of time.
Add a kernel delayed work that periodically sends an event to the
firmware. This is triggered every 200ms. At each execution, the driver
sends a sync request to the firmware reporting the current timestamp
counter value.
This is a pre-requisite for enabling the heartbeat, telemetry and
rate limiting features.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose FW counters statistics by providing the "fw_counters" file
under debugfs. Currently the statistics include the number of
requests sent to the FW and the number of responses received
from the FW for each Acceleration Engine, for all the QAT product
line.
This patch is based on earlier work done by Marco Chiappero.
Co-developed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update fw image names to be constant throughout the driver.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06 16:41:28 +08:00
Renamed from drivers/crypto/qat/qat_common/adf_common_drv.h (Browse further)
