Using BUG_ON() is discouraged and also the check wasn't done early
enough to prevent an out of bounds access. Check earlier and return
an error instead of calling BUG().
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ae643df0-3a3e-4270-8dbf-be390ee4b478@moroto.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It would make sense to return -EPERM if the bit was already set (already
used), not if it was cleared. Before this fix pins can only be exported on
the 2nd attempt:
$ echo 522 > /sys/class/gpio/export
sh: write error: Operation not permitted
$ echo 522 > /sys/class/gpio/export
Fixes: 35b545332b ("gpio: remove gpio_lock")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Several commits introduce managed resources (devm_*) into the
nmk_gpio_populate_chip() function.
This isn't always working because when called from the Nomadik pin
control driver we just want to populate some states for the device as
the same states are used by the pin control driver.
Some managed resources such as devm_kzalloc() etc will work, as the
passed in platform device will be used for lifecycle management,
but in some cases where we used the looked-up platform device
for the GPIO block, this will cause problems for the combined
pin control and GPIO driver, because it adds managed resources
to the GPIO device before it is probed, which is something that
the device core will not accept, and all of the GPIO blocks will
refuse to probe:
platform 8012e000.gpio: Resources present before probing
platform 8012e080.gpio: Resources present before probing
(...)
Fix this by not tying any managed resources to the looked-up
gpio_pdev/gpio_dev device, let's just live with the fact that
these need imperative resource management for now.
Drop in some notes and use a local *dev variable to clarify the
code.
Cc: Théo Lebrun <theo.lebrun@bootlin.com>
Fixes: 12410e9590 ("gpio: nomadik: use devm_platform_ioremap_resource() helper")
Link: https://lore.kernel.org/r/20240305-fix-nomadik-gpio-v2-1-e5d1fbdc3f5c@linaro.org
[Fixed some last minut print formatting]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no need to repeat for-loop twice in the error path in
gpiochip_add_data_with_key(). Deduplicate it. While at it,
rename loop variable to be more specific and avoid ambguity.
It also properly unwinds the SRCU, i.e. in reversed order of allocating.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Previously driver got a few updates in order to replace OF APIs by
respective firmware node, however it was not finished to the logical
end, e.g., some APIs that has been used are still require OF node
to be passed. Finish that job by converting leftovers to use firmware
node APIs.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240302173401.217830-1-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Hogs are added *after* ACPI so should be removed *before* in error path.
Fixes: a411e81e61 ("gpiolib: add hogs support for machine code")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make acpi_gpio_count() take firmware node as a parameter in order
to be aligned with other functions and decouple from unused device
pointer. The latter helps to create a common fwnode_gpio_count()
in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make of_gpio_get_count() take firmware node as a parameter in order
to be aligned with other functions and decouple from unused device
pointer. The latter helps to create a common fwnode_gpio_count()
in the future.
While at it, rename to be of_gpio_count() to be aligned with the others.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After shuffling the code, error path wasn't updated correctly.
Fix it here.
Fixes: 2f4133bb5f ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Chip outputs are enabled[1] before actual reset is performed[2] which might
cause pin output value to flip flop if previous pin value was set to 1.
Fix that behavior by making sure chip is fully reset before all outputs are
enabled.
Flip-flop can be noticed when module is removed and inserted again and one of
the pins was changed to 1 before removal. 100 microsecond flipping is
noticeable on oscilloscope (100khz SPI bus).
For a properly reset chip - output is enabled around 100 microseconds (on 100khz
SPI bus) later during probing process hence should be irrelevant behavioral
change.
Fixes: 7ebc194d0f (gpio: 74x164: Introduce 'enable-gpios' property)
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L130 [1]
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L150 [2]
Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Fetch a reference to the optional shared reset control and deassert it
if it exists.
Optional because not all platforms that use this driver have a reset
attached to the reset block. Shared because some platforms that use the
reset (at least Mobileye EyeQ5) share the reset across banks.
Do not keep a reference to the reset control as it is not needed
afterwards; the driver does not handle suspend, does not use runtime
PM, does not register a remove callback and does not support unbinding
from sysfs (made explicit with suppress_bind_attrs).
The operation is done in nmk_gpio_populate_chip(). This function is
called by either gpio-nomadik or pinctrl-nomadik, whoever comes first.
This is here for historic reasons and could probably be removed now; it
seems gpio-ranges enforces the ordering to be pinctrl-first. It is not
the topic of the present patch however.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-25-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We create a custom compatible for the STA2X11 IP block as integrated
into the Mobileye EyeQ5 platform. Its wake and alternate functions have
been disabled, we want to avoid touching those registers.
We both do: (1) early return in functions that do not support the
platform, but with warnings, and (2) avoid calling those functions in
the first place.
We ensure that pinctrl-nomadik is not used with this STA2X11 variant.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-24-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Read the "ngpios" property to determine the number of GPIOs for a bank.
If not available, fallback to NMK_GPIO_PER_CHIP ie 32 ie the current
behavior.
The IP block always supports 32 GPIOs, but platforms can expose a lesser
amount. The Mobileye EyeQ5 is in this case; one bank is 29 GPIOs and
the other is 23.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-23-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Support a single IRQs used by multiple GPIO banks. Change the IRQ
handler type from a chained handler (as used by gpiolib
for ->parent_handler) to a threaded IRQ.
Use the generic_handle_domain_irq_safe() helper. The non-safe version
must be called in a no-IRQ context.
The Mobileye EyeQ5 platform uses this GPIO controller and share an IRQ
for its two banks.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-22-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This GPIO driver is historically related to the Nomadik platform. It
however can be used by others as it implements the ST STA2X11 IP block.
Pick a less ambiguous name for it.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-21-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not all platforms using this platform driver expose a clock for this
GPIO controller. Turn devm_clk_get() into devm_clk_get_optional() to
avoid failing when no clocks are provided.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-20-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move away from statically allocated GPIO IDs. Switch to dynamic ID
allocation. Static IDs are deprecated because they cause issues when
multiple GPIO controllers are to be found on the same platform.
Add a bit of complexity to do pin number -> GPIO chip + offset.
Previously, bank number and offsets were retrieved using division and
remainder (bank size being constant 32). Now, to get the pin number
matching a bank base, we must know the sum of ngpios of previous banks.
This is done in find_nmk_gpio_from_pin() which also exposes the offset
inside the bank.
Also remove the assumption that bank sizes are constant. Instead of
using NMK_GPIO_PER_CHIP as bank size, use nmk_gpio_chips[i]->ngpio.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-19-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace call to clk_get() by call to devm_clk_get(). Allow automatic
cleanup of the clock in case of probe error.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-18-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace calls to platform_get_resource() then devm_ioremap_resource() by
a single call to devm_platform_ioremap_resource().
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-17-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Avoid OF APIs in the GPIO subsystem. Here, replace
of_find_device_by_node() call by bus_find_device_by_of_node().
The new helper returns a struct device pointer. Store it in a new local
variable and use it down the road.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-15-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Previously, drivers/pinctrl/nomadik/pinctrl-nomadik.c registered two
platform drivers: pinctrl & GPIO. Move the GPIO aspect to the
drivers/gpio/ folder, as would be expected.
Both drivers are intertwined for a reason; pinctrl requires access to
GPIO registers for pinmuxing, pull-disable, disabling interrupts while
setting the muxing and wakeup control. Information sharing is done
through a shared array containing GPIO chips and a few helper
functions. That shared array is not touched from gpio-nomadik when
CONFIG_PINCTRL_NOMADIK is not defined.
Make no change to the code that moved into gpio-nomadik; there should be
no behavior change following. A few functions are shared and header
comments are added. Checkpatch warnings are addressed. NUM_BANKS is
renamed to NMK_MAX_BANKS.
It is supported to compile gpio-nomadik without pinctrl-nomadik. The
opposite is not true.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-6-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This devm API takes a consumer device as an argument to setup the devm
action, but throws it away when calling further into gpiolib. This leads
to odd debug messages like this:
(NULL device *): using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Let's pass the consumer device down, by directly calling what
fwnode_gpiod_get_index() calls but pass the device used for devm. This
changes the message to look like this instead:
gpio-keys gpio-keys: using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Note that callers of fwnode_gpiod_get_index() will still see the NULL
device pointer debug message, but there's not much we can do about that
because the API doesn't take a struct device.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 8eb1f71e7a ("gpiolib: consolidate GPIO lookups")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Display debugfs information about all simulated GPIOs, not only the
requested ones.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
With SRCU we can now correctly handle the situation when a GPIO provider
is removed while having users still holding references to GPIO
descriptors. Remove all warnings emitted in this situation.
Suggested-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Typically, whenever a human-readable name is created for objects using
a software node, its name is delimited with ":" as dashes are often used
in other parts of the name. Make gpio-sim use the same pattern. This
results in better looking default names:
gpio-sim.0:node0
gpio-sim.0:node1
gpio-sim.1:node0
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
We have three functions in gpio-sim that are called with the device lock
already held. We use the "_unlocked" suffix in their names to indicate
that. This has proven to be confusing though as the naming convention in
the kernel varies between using "_locked" or "_unlocked" for this
purpose. Naming convention also doesn't enforce anything. Let's remove
the suffix and add lockdep annotation at the top of these functions.
This makes it clear the function requires a lock to be held (and which
one specifically!) as well as results in a warning if it's not the case.
The only place where the information is lost is the place where the
function is called but the caller doesn't care about that information
anyway.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ChromeOS embedded controller (EC) supports setting the state of
GPIOs when the system is unlocked, and getting the state of GPIOs in all
cases. The GPIOs are on the EC itself, so the EC acts similar to a GPIO
expander. Add a driver to get and set the GPIOs on the EC through the
host command interface.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Similar to gpiochip_generic_request() and gpiochip_generic_free() the
gpiochip_generic_config() function needs to handle the case where there
are no pinctrl pins mapped to the GPIOs, usually through the gpio-ranges
device tree property.
Commit f34fd6ee1b ("gpio: dwapb: Use generic request, free and
set_config") set the .set_config callback to gpiochip_generic_config()
in the dwapb GPIO driver so the GPIO API can set pinctrl configuration
for the corresponding pins. Most boards using the dwapb driver do not
set the gpio-ranges device tree property though, and in this case
gpiochip_generic_config() would return -EPROPE_DEFER rather than the
previous -ENOTSUPP return value. This in turn makes
gpio_set_config_with_argument_optional() fail and propagate the error to
any driver requesting GPIOs.
Fixes: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/linux-gpio/ZdC_g3U4l0CJIWzh@xhacker/
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pointer to the struct of_phandle_args can be made const after
gpio_device_find() arguments got constified. This should be part of
commit 4a92857d6e ("gpio: constify opaque pointer "data" in
gpio_device_find()").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The opaque pointer "data" in each match function used by
gpio_device_find() is a pointer to const, thus the same argument passed
to gpio_device_find() can adjusted similarly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We are actually passing the gc pointer to chip_dbg() so we have to
srcu_dereference() it.
Fixes: 8574b5b476 ("gpio: cdev: use correct pointer accessors with SRCU")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/lkml/179caa10-5f86-4707-8bb0-fe1b316326d6@samsung.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
There are two legacy, deprecated functions - gpiod_to_chip() and
gpio_device_get_chip() - that still have users in tree. They return the
address of the SRCU-protected chip outside of the read-only critical
sections. They are inherently dangerous and the users should convert to
safer alternatives. Let's explicitly silence lockdep warnings by using
rcu_dereference_check(ptr, 1). While at it: reuse
gpio_device_get_chip() in gpiod_to_chip().
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Lockdep with CONFIG_PROVE_RCU enabled reports false positives about
suspicious rcu_dereference() usage. Let's silence it by using
srcu_dereference() which is the correct helper with SRCU.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
We never dereference the chip pointer in character device code so we can
use the lighter rcu_access_pointer() helper. This also makes lockep
happier as it no longer complains about suspicious rcu_dereference()
usage.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
gpiod_hog() may be called without the gpio_device SRCU read lock taken
so we need to do it here as well. It's alright if someone else is
already holding the lock as SRCU read critical sections can be nested.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
In certain situations we may end up taking the GPIO descriptor SRCU read
lock in of_gpiochip_add() before the SRCU struct is initialized. Move
the initialization before the call to of_gpiochip_add().
Fixes: be711caa87 ("gpio: add SRCU infrastructure to struct gpio_desc")
Fixes: 1f2bcb8c8c ("gpio: protect the descriptor label with SRCU")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122228.e607a080-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We still have some functions that return the address of the GPIO chip
associated with the GPIO device. This is dangerous and the users should
find a better solution. Let's add appropriate comments to the kernel
docs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With all accesses to gdev->chip being protected with SRCU, we can now
remove the RW-semaphore specific to the character device which
fulfilled the same role up to this point.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Ensure we cannot crash if the GPIO device gets unregistered (and the
chip pointer set to NULL) during any of the API calls.
To that end: wait for all users of gdev->chip to exit their read-only
SRCU critical sections in gpiochip_remove().
For brevity: add a guard class which can be instantiated at the top of
every function requiring read-only access to the chip pointer and use it
in all API calls taking a GPIO descriptor as argument. In places where
we only deal with the GPIO device - use regular guard() helpers and
rcu_dereference() for chip access. Do the same in API calls taking a
const pointer to gpio_desc.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add the SRCU struct to GPIO device. It will be used to serialize access
to the GPIO chip pointer. Initialize and clean it up where applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Duplicating the can_sleep value in GPIO device will allow us to not
needlessly dereference the chip pointer in several places and reduce the
number of SRCU read-only critical sections.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need to check the gdev pointer in struct gpio_desc - it's
always assigned and never cleared. It's also pointless to check
gdev->chip before we actually serialize access to it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Checking desc->gdev->chip for NULL without holding it in place with some
serializing mechanism is pointless. Remove this check. Also don't check
desc->gdev for NULL as it can never happen. We'll be protecting
gdev->chip with SRCU soon but we will provide a dedicated, automatic
class for that.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
