new drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing
-----BEGIN PGP SIGNATURE-----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=ocVM
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
Limit the workaround introduced by commit 31729e8c21 ("drm/amd/pm: fixes
a random hang in S4 for SMU v13.0.4/11") to only run in the s4 path.
Cc: Tim Huang <Tim.Huang@amd.com>
Fixes: 31729e8c21 ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3351
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the protoype for print ip state to be used
to print the registers in devcoredump during
a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses buffer overflow in the smu_v14_0_init_microcode
function. The issue was about the snprintf function writing more bytes
into the fw_name buffer than it can hold.
The line of code is:
snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
Here, snprintf is used to write a formatted string into fw_name. The
format is "amdgpu/%s.bin", where %s is a placeholder for the string
ucode_prefix. The sizeof(fw_name) argument tells snprintf the maximum
number of bytes it can write into fw_name, including the
null-terminating character. In the original code, fw_name is an array of
30 characters.
The string "amdgpu/%s.bin" could be up to 41 bytes long, which exceeds
the 30 bytes allocated for fw_name. This is because %s could be replaced
by ucode_prefix, which can be up to 29 characters long. Adding the 12
characters from "amdgpu/" and ".bin", the total length could be 41
characters.
To address this, the size of ucode_prefix has been reduced to 15
characters. This ensures that the maximum length of the string written into
fw_name does not exceed its capacity.
smu_13/14 etc. don't follow legacy scheme ie., amdgpu_ucode_legacy_naming
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c: In function ‘smu_v14_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~ ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: fe6cd91524 ("drm/amd/swsmu: add smu14 ip support")
Cc: Li Ma <li.ma@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gpu_od should be removed if it's an empty directory
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Print the od status info if it's not supported.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gpu_od should be removed if it's an empty directory
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add new aca smu callback parse_error_code{} to avoid specific asic check
in amdgpu_aca.c file
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the high voltage issue after unload on smu 13.0.10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While doing multiple S4 stress tests, GC/RLC/PMFW get into
an invalid state resulting into hard hangs.
Adding a GFX reset as workaround just before sending the
MP1_UNLOAD message avoids this failure.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting soft max frequency for MCLK is allowed in 1VF mode in SMUv13.0.6
SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a RAS fatal error is detected, PMFW will only process priority
messages. Other messages won't be taken up for processing and therefore
won't get any response in such a state.
Add logic to filter out non-priority messages when RAS error is
detected. Also, don't poll response response status register before
sending priority messages. Use firmware capability flag to determine
whether to filter priority messages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use OD (pp_od_clk_voltage) interface to report current limits,
default or those set by user, for SCLK and UCLK on aldebaran.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use OD (pp_od_clk_voltage) interface to report current limits,
default or those set by user, for SCLK and UCLK on smu_v_13_0_6
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more possible ext error code.
v2: still use ext error code instead of UC bit.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check AMDGPU_RUNPM_BAMACO intead of amdgpu_runtime_pm
when setting baco state.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
centralize all pp_dpm_xxx attr nodes into
pp_dpm_clk_default_attr_update() function.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for MACO flag checking.
MACO mode only works if BACO is supported.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a unified and more explicit name get_bamaco_support
to replace is_baco_support and get_asic_baco_capability
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new runtime pm mode AMDGPU_RUNPM_BAMACO
and related macro definition
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the high voltage issue after unload on smu 13.0.10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While doing multiple S4 stress tests, GC/RLC/PMFW get into
an invalid state resulting into hard hangs.
Adding a GFX reset as workaround just before sending the
MP1_UNLOAD message avoids this failure.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
add a new enumeration type to identify device attribute node,
this method is relatively more efficient compared with 'strcmp' in
update_attr() function.
v2:
rename device_attr_type to device_attr_id.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Ma Jun <majun@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add new vcn and jpeg msg
v2: squash in updates (Alex)
v3: rework code for better compat with other smu14.x variants (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reducing the size of ucode_prefix to 25 in the smu_v11_0_init_microcode
function. we ensure that fw_name can accommodate the maximum possible
string size
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c: In function ‘smu_v11_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:54: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
110 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 36
110 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pp_dpm_*clk should be set as read only for SRIOV one VF mode, remove
S_IWUGO flag and _store function of these debugfs in one VF mode.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will add VCN sensor value for SMU 14.0.0.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core:
- fix rounding in drm_fixp2int_round()
bridge:
- fix documentation for DRM_BRIDGE_OP_EDID
sun4i:
- fix 64-bit division on 32-bit architectures
tests:
- fix dependency on DRM_KMS_HELPER
probe-helper:
- never return negative values from .get_modes() plus driver fixes
xe:
- invalidate userptr vma on page pin fault
- fail early on sysfs file creation error
- skip VMA pinning on xe_exec if no batches
nouveau:
- clear bo resource bus after eviction
- documentation fixes
- don't check devinit disable on GSP
amdgpu:
- Freesync fixes
- UAF IOCTL fixes
- Fix mmhub client ID mapping
- IH 7.0 fix
- DML2 fixes
- VCN 4.0.6 fix
- GART bind fix
- GPU reset fix
- SR-IOV fix
- OD table handling fixes
- Fix TA handling on boards without display hardware
- DML1 fix
- ABM fix
- eDP panel fix
- DPPCLK fix
- HDCP fix
- Revert incorrect error case handling in ioremap
- VPE fix
- HDMI fixes
- SDMA 4.4.2 fix
- Other misc fixes
amdkfd:
- Fix duplicate BO handling in process restore
-----BEGIN PGP SIGNATURE-----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=EW4i
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Fixes from the last week (or 3 weeks in amdgpu case), after amdgpu,
it's xe and nouveau then a few scattered core fixes.
core:
- fix rounding in drm_fixp2int_round()
bridge:
- fix documentation for DRM_BRIDGE_OP_EDID
sun4i:
- fix 64-bit division on 32-bit architectures
tests:
- fix dependency on DRM_KMS_HELPER
probe-helper:
- never return negative values from .get_modes() plus driver fixes
xe:
- invalidate userptr vma on page pin fault
- fail early on sysfs file creation error
- skip VMA pinning on xe_exec if no batches
nouveau:
- clear bo resource bus after eviction
- documentation fixes
- don't check devinit disable on GSP
amdgpu:
- Freesync fixes
- UAF IOCTL fixes
- Fix mmhub client ID mapping
- IH 7.0 fix
- DML2 fixes
- VCN 4.0.6 fix
- GART bind fix
- GPU reset fix
- SR-IOV fix
- OD table handling fixes
- Fix TA handling on boards without display hardware
- DML1 fix
- ABM fix
- eDP panel fix
- DPPCLK fix
- HDCP fix
- Revert incorrect error case handling in ioremap
- VPE fix
- HDMI fixes
- SDMA 4.4.2 fix
- Other misc fixes
amdkfd:
- Fix duplicate BO handling in process restore"
* tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/amdgpu/pm: Don't use OD table on Arcturus
drm/amdgpu: drop setting buffer funcs in sdma442
drm/amd/display: Fix noise issue on HDMI AV mute
drm/amd/display: Revert Remove pixle rate limit for subvp
Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode"
Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init()"
drm/amd/display: Add a dc_state NULL check in dc_state_release
drm/amd/display: Return the correct HDCP error code
drm/amd/display: Implement wait_for_odm_update_pending_complete
drm/amd/display: Lock all enabled otg pipes even with no planes
drm/amd/display: Amend coasting vtotal for replay low hz
drm/amd/display: Fix idle check for shared firmware state
drm/amd/display: Update odm when ODM combine is changed on an otg master pipe with no plane
drm/amd/display: Init DPPCLK from SMU on dcn32
drm/amd/display: Add monitor patch for specific eDP
drm/amd/display: Allow dirty rects to be sent to dmub when abm is active
drm/amd/display: Override min required DCFCLK in dml1_validate
drm/amdgpu: Bypass display ta if display hw is not available
drm/amdgpu: correct the KGQ fallback message
drm/amdgpu/pm: Check the validity of overdiver power limit
...
add new vcn and jpeg msg
v2: squash in updates (Alex)
v3: rework code for better compat with other smu14.x variants (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will add VCN sensor value for SMU 13.0.5.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will add VCN sensor value for yellow carp.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will drm/amdgpu: add VCN sensor value for Vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new types to distinguish between ACA error type and smu mca type.
e.g.:
the ACA_ERROR_TYPE_DEFERRED is not matched any smu mca valid bank
channel, so add new type 'aca_smu_type' to distinguish aca error type
and smu mca type.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
