We are asked to reprogram PEG_BAND_GAP_DATA prior to enabling
hotplug detection on the g45 HDMI/DP ports. Currently we do said
reprogamming from the DP/HDMI connector initialization functions.
That code should be mostly platform agnostic so clearly not the
best place for this. Move the workaround to the place where we
actually enable HPD detection.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012124033.26983-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.
Cc: <stable@vger.kernel.org>
BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit a3431650f3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.
Cc: <stable@vger.kernel.org>
BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
- Remove watchdog timers for PSR on Lunar Lake (Mika Kahola)
- DSB changes for proper handling of LUT programming (Ville)
- Store DSC DPCD capabilities in the connector (Imre)
- Clean up zero initializers (Ville)
- Remove Meteor Lake force_probe protection (RK)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmUxVawACgkQ+mJfZA7r
E8pKKAf9H6aS95fUeIqrxzkzGVrZ/faOulxzvAG/a0BsNI7SlwAGkQt/z4XWevxY
iZmmJnIxggrP9pWObAZ2LWs6pDtWqzMt5NmuacHLWWdeOFYUaZosfRbQHPKt1WGN
fQFsHk+YKQX2ssi3yuHjGDsdN58pA44AI9d1pb6scmu61TPujmF8Mb9wc3CUCMEW
OrXGYhU18jvUoxyPeXAA29iYxn7BYOmw3Zj98ua5V9vopw/dY9UeVgiblz/ag43d
3fSelNPhTB6AYra0zlV4HQfbxSmWTiFbNsbEa8nC0aKqDlVD6LpDOM+ix5KLRwbP
OC08dzMNL7Oen6LRMyyPRymy6Fp1OQ==
=qQGI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-10-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Add new DG2 PCI IDs (Shekhar)
- Remove watchdog timers for PSR on Lunar Lake (Mika Kahola)
- DSB changes for proper handling of LUT programming (Ville)
- Store DSC DPCD capabilities in the connector (Imre)
- Clean up zero initializers (Ville)
- Remove Meteor Lake force_probe protection (RK)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZTFW4g6duLtp+Wy0@intel.com
The previous patches converted all users of the DSC DPCD caps to look
these up from the connector, so remove the version stored in intel_dp.
A follow-up patchset will read out the MST connector specific
capabilities in intel_dp_add_mst_connector() ->
intel_dp_mst_read_decompression_port_dsc_caps().
v2:
- Rebased on intel_edp_get_dsc_sink_cap() addition in the patchset.
v3:
- Rebased on read-out fix for eDP in the patchset.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-3-imre.deak@intel.com
Use the connector's DSC DPCD capabilities in intel_dp_dsc_compute_max_bpp()
instead of the version stored in the encoder.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-7-imre.deak@intel.com
Similarly to eDP and SST-DP connectors read out the DSC capabilities for
MST connectors as well. Atm these will match the root port's DSC caps
and only used after a follow-up change enables the decompression for
each stream separately (vs. the current way of enabling it only globally
in the first branch device downstream of the root port).
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010112504.2156789-3-imre.deak@intel.com
In an MST topology the DSC capabilities are specific to each connector,
retrieved either from the sink if it decompresses the stream, or from a
branch device between the source and the sink in case this branch device
does the decompression. Accordingly each connector needs to cache its
own DSC DPCD and FEC capabilities, along with the AUX device through
which the decompression can be enabled. This patch prepares for that by
storing the capabilities and the DSC AUX device in the connector, for
now these just matching the version stored in intel_dp. The follow-up
patches will convert all users to look up these in the connector instead
of intel_dp, after which the intel_dp copies are removed.
v2:
- Rebased on intel_edp_get_dsc_sink_cap() addition in previous patch.
v3:
- Rebased on read-out fix for eDP in previous patch.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-2-imre.deak@intel.com
Check only the eDP or the DP specific DPCD revision depending on the
sink type. Pass the corresponding revision to the function, which allows
getting the DSC caps of a branch device (in an MST topology, which has
its own DPCD and so DPCD revision).
While at it use DP_DPCD_REV_14 instead of open coding it and for clarity
add a separate function to read out the DSC capability on eDP.
v2:
- Use DP_DPCD_REV_14 instead of open coding it. (Stan)
- Check EDP_DCPD_REV/DPCD_REV in a clearer way. (Ville)
v3:
- Fix the read-out for eDP in intel_dp_detect().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-1-imre.deak@intel.com
drm/i915 feature pull #2 for v6.7:
Features and functionality:
- Preparation for i915 display code reuse in upcoming Xe driver (Jani)
- Drop the fastboot module parameter and use the platform defaults (Arun)
- Enable new LNL FBC features (Vinod)
- Add LNL display feature capability reads (Vinod)
Refactoring and cleanups:
- Locally enable W=1 warnings by default in i915 (Jani)
- Move HDCP GSC message code to a separate file (Suraj)
- GVT include cleanups (Jani)
- Move more display init under display/ (Jani)
- DPLL ID refactoring (Ville)
- Better abstraction of GT0 (Jani)
- Move VGA decode function to GMCH code (Uma)
- Use local64_try_cmpxchg() to optimize PMU event read (Uros Bizjak)
- Clean up FBC checks (Ville)
- Constify and unify state checker calling conventions (Ville)
- Add display step name helper (Chaitanya)
Documentation:
- Update CCS and GSC CS documentation (Rodrigo)
- Fix a number of documentation typos (Randy Dunlap)
Fixes:
- VLV DSI fixes and quirks (Hans)
- Fix crtc state memory leaks (Suraj)
- Increase LSPCON mode settle timeout (Niko Tsirakis)
- Stop clobbering old crtc state during state check (Ville)
- Fix VLV color state readout (Ville)
- Fix cx0 PHY pipe reset to allow S0iX (Khaled)
- Ensure DP MST pbn_div is up-to-date after sink reconnect (Imre)
- Drop an unnecessary NULL check to fix static analyzer warning (Suraj)
- Use an explicit rather than implicit include for frontbuffer tracking (Jouni)
Merges:
- Backmerge drm-next to fix a conflict (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0m00xew.fsf@intel.com
In some implementations, such as the Qualcomm platforms, the display
driver has no way to query the current HPD state and as such it's
impossible to distinguish between disconnect and attention events.
Add a parameter to drm_connector_oob_hotplug_event() to pass the HPD
state.
Also push the test for unchanged state in the displayport altmode driver
into the i915 driver, to allow other drivers to act upon each update.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009174048.2695981-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009174048.2695981-2-dmitry.baryshkov@linaro.org
At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI
lanes. Make the BW sharing more dynamic by trying to reduce pipe B's
link bpp in this case, until pipe B uses only up to 2 FDI lanes.
For this instead of the encoder compute config retry loop - which
reduced link bpp only for the encoder's pipe - reduce the maximum link
bpp for pipe B/C as required after all CRTC states are computed and
recompute the CRTC states with the new bpp limit.
Atm, all FDI encoder's compute config function returns an error if a BW
constrain prevents increasing the pipe bpp value. The corresponding
crtc_state->bw_constrained check can be replaced with checking
crtc_state->max_link_bpp_x16, add TODO comments for this. SDVO is an
exception where this case is only handled in the outer config retry
loop, failing the modeset with a WARN, add a FIXME comment to handle
this in the encoder code similarly to other encoders.
v2:
- Don't assume that a CRTC is already in the atomic state, while
reducing its link bpp.
- Add DocBook description to intel_fdi_atomic_check_link().
v3:
- Enable BW management for FDI links in a separate patch. (Ville)
v4: (Ville)
- Fail the SDVO encoder config computation if it doesn't support the
link bpp limit.
- Add TODO: comments about checking link_bpp_x16 instead of
bw_constrained.
v5:
- Replace link bpp limit check with a FIXME: comment in
intel_sdvo_compute_config(). (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Amended commit message wrt. changes in v5]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-11-imre.deak@intel.com
Limit the output link bpp in DSC mode to the link_config_limits
link.min_bpp_x16 .. max_bpp_x16 range the same way it's done in non-DSC
mode. Atm this doesn't make a difference, the link bpp range being
0 .. max pipe bpp, but a follow-up patch will need a way to reduce max
link bpp below its current value.
v2:
- Add to_bpp_int_roundup() instead of open coding it. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-6-imre.deak@intel.com
In non-DSC mode the link bpp can be set in 2*3 bpp steps in the pipe bpp
range, while in DSC mode it can be set in 1/16 bpp steps to any value
up to the maximum pipe bpp. Update the limits accordingly in both modes
to prepare for a follow-up patch which may need to reduce the max link
bpp value and starts to check the link bpp limits in DSC mode as well.
While at it add more detail to the link limit debug print and print it
also for DSC mode.
v2:
- Add to_bpp_frac_dec() instead of open coding it. (Jani)
v3: (Ville)
- Add BPP_X16_FMT / BPP_X16_ARG.
- Add TODO: comment about initializing the DSC link bpp limits earlier.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-5-imre.deak@intel.com
Computing the non-DSC mode link config is redundant once it's determined
that DSC will be needed, so skip computing it. In a follow-up patch this
simplifies setting the link limits which are dependent on the DSC vs.
non-DSC mode.
While at it sanitize the debug print about the MST DSC fallback path,
making it similar to the SST DSC one.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-4-imre.deak@intel.com
A follow-up patch will need to limit the output link bpp both in the
non-DSC and DSC configuration, so track the pipe and link bpp limits
separately in the link_config_limits struct.
Use .4 fixed point format for link bpp matching the 1/16 bpp granularity
in DSC mode and for now keep this limit matching the pipe bpp limit.
v2: (Jani)
- Add to_bpp_int(), to_bpp_x16() helpers instead of opencoding them.
- Rename link_config_limits::link.min/max_bpp to min/max_bpp_x16.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-3-imre.deak@intel.com
Factor out helpers that DP / DP_MST encoders can use to compute the link
rate/lane count and bpp limits. A follow-up patch will call these to
recalculate the limits if DSC compression is required.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-2-imre.deak@intel.com
Make the seamless_m_n flag more like the update_pipe fastset
flag, ie. the flag will only be set if we need to do the seamless
M/N update, and in all other cases the flag is cleared. Also
rename the flag to update_m_n to make it more clear it's similar
to update_pipe.
I believe special casing seamless_m_n like this makes sense
as it also affects eg. vblank evasion. We can potentially avoid
some vblank evasion tricks, simplify some checks, and hopefully
will help with the VRR vs. M/N mess.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Populate connector->ddc, and thus create the "ddc" symlink
in sysfs for analog DP SST connectors.
Let's also reorder intel_dp_aux_init() vs. drm_connector_init_with_ddc()
a bit to make sure the i2c aux ch is at least somewhat populated
before we pass it on, though drm_connector_init_with_ddc() does
not actually do anything with it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Track DP enhanced framing properly in the crtc state instead
of relying just on the cached DPCD everywhere, and hook it
up into the state check and dump.
v2: Actually set enhanced_framing in .compute_config()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230503113659.16305-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
On pre-TGL FEC is a port level feature, not a transcoder
level feature, and it's DDI A which doesn't have it, not
trancoder A. Check for the correct thing when determining
whether FEC is supported or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-5-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Apparently Acer Chromebook C740 (BDW-ULT) doesn't have the
eDP HPD line properly connected, and thus fails the new
HPD check during eDP probe. The result is that we lose the
eDP output.
I suspect all such machines would be Chromebooks or other
Linux exclusive systems as the Windows driver likely wouldn't
work either. I did check a few other BDW machines here and
those do have eDP HPD connected, one of them even is a
different Chromebook (Samus).
To account for these funky machines let's skip the HPD check when
it looks like the eDP port is the only one using that specific AUX
channel. In case of multiple ports sharing the same AUX CH (eg. on
Asrock B250M-HDV) we still do the check and thus should correctly
ignore the eDP port in favor of the other DP port (usually a DP->VGA
converter).
v2: Don't oops during list iteration
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9264
Fixes: cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230908052527.685-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
It is irrelevant for the caller that the max lane count is being
derived from a FIA register, so having "fia" in the function name is
irrelevant. Rename the function accordingly.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230825081638.275795-5-luciano.coelho@intel.com
intel_dp_force() takes the AUX power reference as required by the DP AUX
transactions in intel_dp_set_edid(). However the low level AUX handler
takes this reference already so the get/put in intel_dp_force() can be
dropped. This also fixes a problem where the TC port mode changed while
the AUX power well was enabled.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8779
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830140421.2031111-1-imre.deak@intel.com
Currently for testing an output format with DSC, we just force the
output format, without checking if it can be supported.
This also creates an issue where there is a PCON which might need to
convert from forced output format to the format to sink format.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-19-ankit.k.nautiyal@intel.com
Currently, we take the max lane, rate and pipe bpp, to get the maximum
compressed bpp possible. We then set the output bpp to this value.
This patch provides support to have max bpp, min rate and min lanes,
that can support the min compressed bpp.
v2:
-Avoid ending up with compressed bpp, same as pipe bpp. (Stan)
-Fix the checks for limits->max/min_bpp while iterating over list of
valid DSC bpcs. (Stan)
v3:
-Refactor the code to have pipe bpp/compressed bpp computation and slice
count calculation separately for different cases.
v4:
-Separate the pipe_bpp calculation for eDP and DP.
v5:
-Get rid of magic numbers for max and min bpp,
and improve documentation. (Stan).
-Use functions for {src_sink}_{min_max}_compressed_bpp (Ville).
v6:
-Remove lines to set link config to max.
v7:
-Split the part to separate edp and dp functions for computing DSC BPP
into separate patch.
v8:
-Separate mechanism to get compressed bpp for ICL,TGL and XELPD+.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-17-ankit.k.nautiyal@intel.com
Currently we check if the pipe_bpp selected is >= the
min DSC bpc/bpp requirement. We do not check if it is <= the max DSC
bpc/bpp requirement.
Add checks for max DSC BPC/BPP constraints while computing the
pipe_bpp when DSC is in use.
v2: Fix the commit message.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-15-ankit.k.nautiyal@intel.com
