We never set connector->doublescan_allowed, so the probe helper
already filters out all doublescan modes for us.
Sadly we still need to keep the explicit doublescan checks
in .compute_config as outlined in commit e4dd27aadd
("drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI")
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-2-ville.syrjala@linux.intel.com
This reverts commit 0d82a0d6f5.
The commit failed to take into account that the parameter duplication
and debugfs for char * parameters were subtly different between i915
core and display, and caused the DMC and PM to be disabled. Moreover,
the patch was pushed with failing CI results. Revert, and get back to
the drawing board.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
UHBR13.5 is not supported in MTL and also the DP2.1 spec says UHBR13.5
is optional. Hence removing UHBR135 from the supported link rates.
v2: Reframed the commit message and added link to the issue.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Fixes: 62618c7f11 ("drm/i915/mtl: C20 PLL programming")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228144350.3184930-1-arun.r.murthy@intel.com
(cherry picked from commit ddf8a8bbb5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Enable ALPM AUX-Less on source side for Panel Replay eDP. Also write all
calculated AUX-Less configuration values accordingly. Enabling it on sink
side is in upcoming patch.
Bspec: 71477
v5:
- mention enable is only on source side in commit message
v4:
- add comment explaining why AUX less is enabled on eDP panel replay
without any extra checks
v3:
- do not use alpm_ctl as uninitialized variable
v2:
- do not set AUX-Wake related bits for AUX-Less case
- drop switch to active latency
- add SLEEP_HOLD_TIME_50_SYMBOLS
- add PORT_ALPM_CTL_MAX_PHY_SWING_HOLD
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-5-jouni.hogander@intel.com
Add get function for silence period and lfps half cycle. Values are taken
from the tables in bspec.
Bspec: 71632
v3:
- use PORT_ALPM_CTL_SILENCE_PERIOD_MASK instead of value 255
- use PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION_MASK instead of
value 31
v2:
- fix some checks
- add some more comments
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-4-jouni.hogander@intel.com
Calculate aux less wake time and store it into alpm_params struct
Bspec: 71477
v4:
- re-use fast_wake_lines to store aux_less_wake_lines
v3:
- use ALPM_CTL_AUX_LESS_WAKE_TIME_MASK instead of value 63
v2:
- use variables instead of values directly
- fix max value
- move converting port clock to Mhz into _lnl_compute_aux_less_wake_time
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-3-jouni.hogander@intel.com
Couple of ALPM AUX-Less related fields are missing from ALPM register
definitions. Add these and remove some duplicate definitions.
Bspec: 70294
V2: add Bspec reference
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-2-jouni.hogander@intel.com
The dmc_firmware_path parameter is clearly a display parameter. Move it
there so it's available to both i915 and xe modules. This also cleans up
the ugly member in struct xe_device.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321161856.3517856-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use localized __diag_push(), __diag_ignore_all() with rationale, and
__diag_pop() for specific initializations instead of blanket disabling
of -Woverride-init across several files.
Note that we've tried this before with commit 88e9664434 ("drm/i915:
use localized __diag_ignore_all() instead of per file") and reverted in
commit 290d161045 ("Revert "drm/i915: use localized
__diag_ignore_all() instead of per file""). The issue turned out to be
in __diag_ignore_all() and it was fixed by commit 689b097a06
("compiler-gcc: Suppress -Wmissing-prototypes warning for all supported
GCC"). So we should be able to pull this off now.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102455.944131-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For DISPLAY < 13, compressed bpp is chosen from a list of
supported compressed bpps. Fix the condition to choose the
appropriate compressed bpp from the list.
Fixes: 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10162
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305054443.2489895-1-ankit.k.nautiyal@intel.com
Calling i915_gem_object_get_dma_address() from the vblank
evade critical section triggers might_sleep().
While we know that we've already pinned the framebuffer
and thus i915_gem_object_get_dma_address() will in fact
not sleep in this case, it seems reasonable to keep the
unconditional might_sleep() for maximum coverage.
So let's instead pre-populate the dma address during
fb pinning, which all happens before we enter the
vblank evade critical section.
We can use u32 for the dma address as this class of
hardware doesn't support >32bit addresses.
Cc: stable@vger.kernel.org
Fixes: 0225a90981 ("drm/i915: Make cursor plane registers unlocked")
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_crate.local/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.syrjala@linux.intel.com
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
(cherry picked from commit c1289a5c35)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since commit 0c65dc0626 ("drm/i915/jsl: s/JSL/JASPERLAKE for
platform/subplatform defines"), boot freezes on a Jasper Lake tablet
(Librem 11), usually with graphical corruption on the eDP display,
but sometimes just a black screen. This commit was included in 6.6 and
later.
That commit was intended to refactor EHL and JSL macros, but the change
to ehl_combo_pll_div_frac_wa_needed() started matching JSL incorrectly
when it was only intended to match EHL.
It replaced:
return ((IS_PLATFORM(i915, INTEL_ELKHARTLAKE) &&
IS_JSL_EHL_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
with:
return (((IS_ELKHARTLAKE(i915) || IS_JASPERLAKE(i915)) &&
IS_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
Remove IS_JASPERLAKE() to fix the regression.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Cc: stable@vger.kernel.org
Fixes: 0c65dc0626 ("drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform defines")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313135424.3731410-1-jonathon.hall@puri.sm
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 1ef4885931)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks like the undelayed vblank gets signalled exactly when
the active period ends. That is a problem for DSB+VRR when
we are already in vblank and expect DSB to start executing
as soon as we send the push. Instead of starting, the DSB
just keeps on waiting for the undelayed vblank which won't
signal until the end of the next frame's active period,
which is far too late.
The end result is that DSB won't have even started
executing by the time the flips/etc. have completed.
We then wait for an extra 1ms, after which we terminate
the DSB and report a timeout:
[drm] *ERROR* [CRTC:80:pipe A] DSB 0 timed out waiting for idle (current head=0xfedf4000, head=0x0, tail=0x1080)
To fix this let's configure DSB to use the so called VRR
"safe window" instead of the undelayed vblank to trigger
the DSB vblank logic, when VRR is enabled.
Cc: stable@vger.kernel.org
Fixes: 34d8311f4a ("drm/i915/dsb: Re-instate DSB for LUT updates")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9927
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306040806.21697-3-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
(cherry picked from commit 41429d9b68)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks like TRANS_CHICKEN bit 31 means something totally different
depending on the platform:
TGL: generate VRR "safe window" for DSB
ADL/DG2: make TRANS_SET_CONTEXT_LATENCY effective with VRR
So far we've only set this on ADL/DG2, but when using DSB+VRR
we also need to set it on TGL.
And a quick test on MTL says it doesn't need this bit for either
of those purposes, even though it's still documented as valid
in bspec.
Cc: stable@vger.kernel.org
Fixes: 34d8311f4a ("drm/i915/dsb: Re-instate DSB for LUT updates")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9927
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306040806.21697-2-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
(cherry picked from commit 810e4519a1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reinstate commit 88b065943c ("drm/i915/dsi: Do display on
sequence later on icl+"), for the most part. Turns out some
machines (eg. Chuwi Minibook X) really do need that updated order.
It is also the order the Windows driver uses.
However we can't just undo the revert since that would again
break Lenovo 82TQ. After staring at the VBT sequences for both
machines I've concluded that the Lenovo 82TQ sequences look
somewhat broken:
- INIT_OTP is not present at all
- what should be in INIT_OTP is found in DISPLAY_ON
- what should be in DISPLAY_ON is found in BACKLIGHT_ON
(along with the actual backlight stuff)
The Chuwi Minibook X on the other hand has a full complement
of sequences in its VBT.
So let's try to deal with the broken sequences in the
Lenovo 82TQ VBT by simply swapping the (non-existent)
INIT_OTP sequence with the DISPLAY_ON sequence. Thus we
execute DISPLAY_ON when intending to execute INIT_OTP,
and execute nothing at all when intending to execute
DISPLAY_ON. That should be 100% equivalent to the
revert, for such broken VBTs.
Cc: stable@vger.kernel.org
Fixes: 6992eb815d ("Revert "drm/i915/dsi: Do display on sequence later on icl+"")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/10071
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10334
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305083659.8396-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 94ae4612ea)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
AuxCCS framebuffers don't work on Xe driver hence disable them
from plane capabilities until they are fixed. FlatCCS framebuffers
work and they are left enabled. CCS is left untouched for i915
driver.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/933
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228140225.858145-1-juhapekka.heikkila@gmail.com
(cherry picked from commit b7232a730f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks like I misplaced a few hunks when I moved the audio
enable/disable out from the encoder enable/disable hooks.
So we are now doing a double audio enable/disable on SDVO
and g4x+ DP. Probably harmless as doing it twice shouldn't
really change anything, but let's do it just once, as intended.
Fixes: cff742cc68 ("drm/i915: Hoist the encoder->audio_{enable,disable}() calls higher up")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226193251.29619-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 315bd0a082)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we are not aligning selective update area to cover cursor fully
when cursor is not updated by itself but still in the selective update
area. Fix this by checking cursor separately after
drm_atomic_add_affected_planes.
Bspec: 68927
Fixes: 1bff93b8bc ("drm/i915/psr: Extend SU area to cover cursor fully if needed")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319123327.1661097-4-jouni.hogander@intel.com
Currently PIPE_SRCSZ_ERLY_TPT is written in
intel_display.c:intel_set_pipe_src_size. This doesn't work as
intel_set_pipe_src_size is called only on modeset.
Bspec: 68927
Fixes: 3291bbb93e ("drm/i915/psr: Configure PIPE_SRCSZ_ERLY_TPT for psr2 early transport")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319123327.1661097-3-jouni.hogander@intel.com
When early transport is enabled we need to write PIPE_SRCSZ_ERLY_TPT on
every flip doing selective update. This patch calculates
PIPE_SRCSZ_ERLY_TPT same way as is done for PSR2_MAN_TRK_CTL value and
stores i in intel_crtc_state->pipe_srcsz_early_tpt to be written later
during flip.
Bspec: 68927
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319123327.1661097-2-jouni.hogander@intel.com
UHBR13.5 is not supported in MTL and also the DP2.1 spec says UHBR13.5
is optional. Hence removing UHBR135 from the supported link rates.
v2: Reframed the commit message and added link to the issue.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Fixes: 62618c7f11 ("drm/i915/mtl: C20 PLL programming")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228144350.3184930-1-arun.r.murthy@intel.com
Historically the expectation was to set brightness to max on enable, if
it was zero. However, the policy should be to preserve brightness across
disable/enable, for example the userspace might want to dim the
brightness before disable (e.g. on suspend) and gradually bring it back
up after enable (e.g. on resume). If the brightness gets bumped to max
at enable, this causes flicker as the userspace expects the brightness
to have been preserved across disable/enable.
For example:
(suspend)
[53949.248875] i915 0000:00:02.0: [drm:intel_edp_backlight_off]
[53949.452046] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level] set backlight PWM = 0
(wakeup)
[53986.067356] i915 0000:00:02.0: [drm:intel_edp_backlight_on]
[53986.067367] i915 0000:00:02.0: [drm:intel_backlight_enable] pipe A
[53986.067476] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level] set backlight PWM = 96000
[53986.119766] backlight intel_backlight: PM: calling backlight_resume+0x0/0x7a @ 4916, parent: card0-eDP-1
[53986.119781] backlight intel_backlight: PM: backlight_resume+0x0/0x7a returned 0 after 0 usecs
[53986.220068] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=26321/96000
[53986.220086] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight] set backlight level = 27961
Reduce the check to respecting the minimum brightness, and avoid bumping
min brightness to max on enable.
Note: It's possible there's still userspace out there that relies on the
old behaviour. It would be unfortunate, but there's really only one way
to find out.
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gareth Yu <gareth.yu@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[Jani: Rewrote the commit message.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321045311.2124111-1-gareth.yu@intel.com
When we have no VBT we currently assume ports A-F are
all pontially valid for every platform. That is nonsense.
Grab the bitmask of valid ports from the runtime info
instead.
Although the defaults we actually fill here look semi-sensible
only for hsw-skl era hardware. Dunno if we should try to do
something more appropriate here for other platforms,
or just try to nuke the whole thing?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319092443.15769-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Calling i915_gem_object_get_dma_address() from the vblank
evade critical section triggers might_sleep().
While we know that we've already pinned the framebuffer
and thus i915_gem_object_get_dma_address() will in fact
not sleep in this case, it seems reasonable to keep the
unconditional might_sleep() for maximum coverage.
So let's instead pre-populate the dma address during
fb pinning, which all happens before we enter the
vblank evade critical section.
We can use u32 for the dma address as this class of
hardware doesn't support >32bit addresses.
Cc: stable@vger.kernel.org
Fixes: 0225a90981 ("drm/i915: Make cursor plane registers unlocked")
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_crate.local/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.syrjala@linux.intel.com
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Do some renames on the register wait functions for clarity and brevity:
intel_de_wait_for_register -> intel_de_wait
intel_de_wait_for_register_fw -> intel_de_wait_fw
__intel_de_wait_for_register -> intel_de_wait_custom
In particular, it seemed odd to have a double-underscored function be
called in a number of places.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320160123.2904609-1-jani.nikula@intel.com
The VBT backlight entries include various fields for i2c
controlled backlights. These have been obsoleted at some
unknown point in time, but let's define them anyway so that
we have a full picture of what has been in there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321161806.31714-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
According to some VBIOS sources the LFP power block used to
have a single bit for DPST support. In version 159 that bit
got moved into the driver features block, and then in version
228 back into the LFP power block (but this time as a
per-panel thing). We have definitions for the last two, but
not the original bit. Define it as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321161806.31714-4-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
While the spec does claim that most of the driver feature flags
start from BDB version 165, reality and some VBIOS code disagrees.
The VBIOS code says it starts from version 159, and my ILK
with version 162 definitely has these things already in its
VBT. Update the version number comments to say 159+ for all
the bits that seem relevant for pre-hsw hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321161806.31714-3-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Add a number of encoder based functions to check if the port/phy of the
encoder is of a certain type, or to convert to phy or tc_port. Initially
these are just wrappers around the existing functions, but they can be
improved to use VBT data or use some cached info in the future.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7b2d350ee42883f2784030c649d16f983bd407bd.1710949619.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the sink supports 128b/132b and single-stream sideband messaging,
enable MST mode.
With this, the topology manager will still write DP_MSTM_CTRL, which
should be ignored by the sink. In the future, the topology manager
should probably only set the sideband messaging related parts of the
register.
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/39d753e53cd662c3fd3776b6167bf792219fd950.1710839496.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Drop the duplicate read of DP_MSTM_CAP DPCD register, and the duplicate
logic for choosing MST mode, and store the chosen mode in struct
intel_dp. Rename intel_dp_configure_mst() to intel_dp_mst_configure()
while at it.
v2: Rebase on drm_dp_mst_detect() returning the mode, not bool
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/93a48df9a77e1138bb28e645fae3f9c79b094cc7.1710839496.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
