Rename files mtk_drm_plane.h to mtk_plane.h.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.corp-partner.google.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240322091232.26387-11-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
We found a stability issue on MT8188 when connecting an external monitor
in 2560x1440@144Hz mode. Checked with the designer, there is a function
called "prefetch" which is working during VBP (triggered by VSYNC).
If the duration of VBP is too short, the throughput requirement could
increase more than 3 times and lead to stability issues.
The mode settings that VDOSYS supports are mainly affected by clock
rate and throughput, display driver should filter these settings
according to the SoC's limitation to avoid unstable conditions.
Since currently the mode filter is only available on MT8195 and MT8188
and they share the same compatible name, the reference number (8250)
is hard coded instead of in the driver data.
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.corp-partner.google.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240220093711.20546-2-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Padding is a new display module on MT8188, it provides ability
to add pixels to width and height of a layer with specified colors.
Due to hardware design, Mixer in VDOSYS1 requires width of a layer
to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
we need Padding to deal with odd width.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-19-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Different from OVL, OVL adaptor is a pseudo device so we didn't
define it in the device tree, consequently, pm_runtime_resume_and_get()
called by .atomic_enable() powers on no device. For this reason, we
implement a function to power on the RDMAs in OVL adaptor, and the
system will make sure the IOMMUs are powered on as well because of the
device link (iommus) in the RDMA nodes in DTS.
This patch separates power and clock management process, it would be
easier to maintain and add extensions.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-15-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Newer Gamma IP have got multiple LUT banks: support specifying the
size of the LUT banks and handle bank-switching before programming
the LUT in mtk_gamma_set_common() in preparation for adding support
for MT8195 and newer SoCs.
Suggested-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
[Angelo: Refactored original commit]
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Newer SoCs support a bigger Gamma LUT table: wire up a callback
to retrieve the correct LUT size for each different Gamma IP.
Co-developed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
[Angelo: Rewritten commit message/description + porting]
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Adjust the parameters in mtk_drm_gamma_set_common()
- add (struct device *dev) to get lut_diff from gamma's driver data
- remove (bool lut_diff) and use false as default value in the function
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add implementation of mtk_dsi_encoder_index to mtk_ddp_comp_func
to make mtk_dsi support dynamic connector selection.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-9-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add implementation of mtk_dpi_encoder_index to mtk_ddp_comp_func
to make mtk_dpi support dynamic connector selection.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-7-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
1. Add ovl_adaptor get_format and get_num_formats component function.
The two functions are needed for getting the supported format in
mtk_plane_init().
2. Get supported format from the ovl_adaptor's rdma engine - mdp_rdma.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230330032614.18837-3-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add ovl_adaptor driver for MT8195.
Ovl_adaptor is an encapsulated module and designed for simplified
DRM control flow. This module is composed of 8 RDMAs, 4 MERGEs and
an ETHDR. Two RDMAs merge into one layer, so this module support 4
layers.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230321121859.2355-4-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add an DDP component interface for querying pixel format support
and move list of supported pixel formats into DDP components
instead of mtk_drm_plane.c
Tested by running Chrome on an MT8195.
Signed-off-by: Justin Green <greenjustin@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230309210416.1167020-2-greenjustin@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add merge start/stop API for cmdq support. The ovl_adaptor merges
are configured with each drm plane update. Need to enable/disable
merge with cmdq making sure all the settings taken effect in the
same vblank.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-6-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add merge new advance config API. The original merge API is
mtk_ddp_comp_funcs function prototype. The API interface parameters
cannot be modified, so add a new config API for extension. This is
the preparation for ovl_adaptor merge control.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-5-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add MDP_RDMA driver for MT8195. MDP_RDMA is the DMA engine of
the ovl_adaptor component.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-4-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
mt8183 gamma module usage is different with before soc,
gamma odd(index start from 0) lut value set to hardware
register should be
the difference of current lut value with last lut value.
for example, chrome os user space set lut
like this(only r chanel for example):
2 4 6 8 10 12.
1) mt8183 gamma driver should set the gamma lut to hardware
register like this:
2 [2] 6 [2] 10 [2]
the value with [] is the difference value
2)gamma hardware process display data with original lut
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220428085829.15855-2-yongqiang.niu@mediatek.com/
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.corp-partner.google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
We encountered a kernel panic issue that callback data will be NULL when
it's using in ovl irq handler. There is a timing issue between
mtk_disp_ovl_irq_handler() and mtk_ovl_disable_vblank().
To resolve this issue, we use the flow to register/unregister vblank cb:
- Register callback function and callback data when crtc creates.
- Unregister callback function and callback data when crtc destroies.
With this solution, we can assure callback data will not be NULL when
vblank is disable.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220321072320.15019-1-rex-bc.chen@mediatek.com/
Fixes: 9b0704988b ("drm/mediatek: Register vblank callback function")
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
MT8173 aal has gamma function but mt8183 aal has no gamma
function, so separate aal sub driver to have a private
data for different SoC.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
ccorr ctm matrix bits will be different in mt8192.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
mt8183 gamma module will different with mt8173,
so separate gamma for adding private data.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Current implementation of mtk_dither_set() cast dev data to
struct mtk_ddp_comp_dev. But other devices with different dev data
would also call this function.
Separate necessary parameters out so other device components (dither,
gamma) can call this function.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Some ddp component exist in both display path and other path, so
sub driver should not directly call DRM driver's function. Let
DRM driver directly refer to sub driver's function so that sub
driver need not register these function to DRM driver.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
