The dp_drm needs accessing the DP's platform device. Move pdev to the
public structure.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561642/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Make MSM HDMI driver use devm_drm_bridge_add() instead of plain
drm_bridge_add(). As the driver doesn't require any additional cleanup,
stop adding created bridge to the priv->bridges array.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561635/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Make MSM DSI driver use devm_drm_bridge_add() instead of plain
drm_bridge_add(). As the driver doesn't require any additional cleanup,
stop adding created bridge to the priv->bridges array.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561636/
Signed-off-by: Rob Clark <robdclark@chromium.org>
To let the probe function bail early if any of the resources is
unavailable, move resource allocattion from kms_init directly to the
probe callback.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561630/
Signed-off-by: Rob Clark <robdclark@chromium.org>
To let the probe function bail early if any of the resources is
unavailable, move resource allocattion from kms_init directly to the
probe callback. While we are at it, replace irq_of_parse_and_map() with
platform_get_irq().
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561628/
Signed-off-by: Rob Clark <robdclark@chromium.org>
To let the probe function bail early if any of the resources is
unavailable, move resource allocattion from kms_init directly to the
probe callback. While we are at it, replace irq_of_parse_and_map() with
platform_get_irq().
This also drops devm_iounmap() calls. It is too early to have them
_dpu_kms_hw_destroy() (or it will break if for some reason DPU device is
rebound into the composite device) and it doesn't make sense to have
them in dpu_dev_remove (as everything will be torn down by the devres
anyway after the device is unbound from the driver).
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561629/
Signed-off-by: Rob Clark <robdclark@chromium.org>
In preparation of moving resource allocation to the probe time, allow
MSM KMS drivers to pass struct msm_kms pointer via msm_drv_probe().
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561627/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Downstream calls this the "speedbin 1", but that number is already
occupied. Use index two.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559607/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some (many?) devices with A635 expect a ZAP shader to be loaded.
Set the file name to allow for that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559605/
Signed-off-by: Rob Clark <robdclark@chromium.org>
When opp-supported-hw is present under an OPP node, but no form of
opp_set_supported_hw() has been called, that OPP is ignored by the API
and marked as unsupported.
Before Commit c928a05e44 ("drm/msm/adreno: Move speedbin mapping to
device table"), an unknown speedbin would result in marking all OPPs
as available, but it's better to avoid potentially overclocking the
silicon - the GMU will simply refuse to power up the chip.
Currently, the Adreno speedbin code does just that (AND returns an
invalid error, (int)UINT_MAX). Fix that by defaulting to speedbin 0
(which is conveniently always bound to fuseval == 0).
Fixes: c928a05e44 ("drm/msm/adreno: Move speedbin mapping to device table")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559604/
Signed-off-by: Rob Clark <robdclark@chromium.org>
SM6375 comes with a patchlevel=1. Fix the chipid up to reflect that.
Fixes: 90b593ce1c ("drm/msm/adreno: Switch to chip-id for identifying GPU")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554527/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some GPUs - particularly A7xx ones - are really really stubborn and
sometimes take a longer-than-expected time to finish unhalting GBIF.
Note that this is not caused by the request a few lines above.
Poll for the unhalt ack to make sure we're not trying to write bits to
an essentially dead GPU that can't receive data on its end of the bus.
Failing to do this will result in inexplicable GMU timeouts or worse.
This is a rather ugly hack which introduces a whole lot of latency.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559292/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A740 builds upon the A730 IP, shuffling some values and registers
around. More differences will appear when things like BCL are
implemented.
adreno_is_a740_family is added in preparation for more A7xx GPUs,
the logic checks will be valid resulting in smaller diffs.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559291/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for Adreno 730, also known as GEN7_0_x, found on SM8450.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559290/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Provide the necessary alternations to mostly support state dumping on
A7xx. Newer GPUs will probably require more changes here. Crashdumper
and debugbus remain untested.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559289/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The QMP mailbox expects to be notified of the ACD (Adaptive Clock
Distribution) state. Get a handle to the mailbox at probe time and
poke it at GMU resume.
Since we don't fully support ACD yet, hardcode the message to "val: 0"
(state = disabled).
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559287/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A7xx GPUs are - from kernel's POV anyway - basically another generation
of A6xx. They build upon the A650/A660_family advancements, skipping some
writes (presumably more values are preset correctly on reset), adding
some new ones and changing others.
One notable difference is the introduction of a second shadow, called BV.
To handle this with the current code, allocate it right after the current
RPTR shadow.
BV handling and .submit are mostly based on Jonathan Marek's work.
All A7xx GPUs are assumed to have a GMU.
A702 is not an A7xx-class GPU, it's a weird forked A610.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559285/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add some missing definitions required for A7 support.
This may be substituted with a mesa header sync.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559282/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Plugging in an Apple dongle without the HDMI cable attached prints out
an error message in the kernel logs when nothing is actually wrong.
no downstream ports connected
This is because the downstream port for the HDMI connector is not
connected, so the Apple dongle reports that as a zero sink count device.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/556068/
Link: https://lore.kernel.org/r/20230906181226.2198441-3-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This function is basically a one-liner when you ignore the debug
logging. Just inline the function and drop the log to simplify the code.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/556066/
Link: https://lore.kernel.org/r/20230906181226.2198441-2-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As the INTF is fixed at the encoder creation time, we can move the
check whether INTF supports tearchck to dpu_encoder_phys_cmd_init().
This function can return an error if INTF doesn't have required feature.
Performing this check in dpu_encoder_phys_cmd_tearcheck_config() is less
useful, as this function returns void.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/555553/
Link: https://lore.kernel.org/r/20230904020454.2945667-9-dmitry.baryshkov@linaro.org
The DPU_INTF_TE bit is set for all INTF blocks on DPU >= 5.0, however
only INTF_1 and INTF_2 actually support tearing control (both are
INTF_DSI). Rather than trying to limit the DPU_INTF_TE feature bit to
those two INTF instances, check for the major && INTF type.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/555547/
Link: https://lore.kernel.org/r/20230904020454.2945667-6-dmitry.baryshkov@linaro.org
The DP CTS test for EDID last block checksum expects the checksum for
the last block, invalid or not. Skip the validity check.
For the most part (*), the EDIDs returned by drm_get_edid() will be
valid anyway, and there's the CTS workaround to get the checksum for
completely invalid EDIDs. See commit 7948fe12d4 ("drm/msm/dp: return
correct edid checksum after corrupted edid checksum read").
This lets us remove one user of drm_edid_block_valid() with hopes the
function can be removed altogether in the future.
(*) drm_get_edid() ignores checksum errors on CTA extensions.
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/555361/
Link: https://lore.kernel.org/r/20230901142034.580802-1-jani.nikula@intel.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This function is simply drm_dp_is_branch() so use that instead of
open-coding it.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554989/
Link: https://lore.kernel.org/r/20230829184735.2841739-8-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The function dp_link_parse_sink_count() is really just
drm_dp_read_sink_count(). It debug prints out the bit for content
protection (DP_SINK_CP_READY), but that is not useful beyond debug
because 'link->dp_link.sink_count' is overwritten to only contain the
sink_count in this same function. Just use drm_dp_read_sink_count() in
the one place this function is called to simplify.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554987/
Link: https://lore.kernel.org/r/20230829184735.2841739-7-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
These are open-coded versions of common functions. Replace them with the
common code to improve readability.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554990/
Link: https://lore.kernel.org/r/20230829184735.2841739-6-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The member 'aux_cfg_update_done' is always false. This is dead code that
never runs. Remove it.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554985/
Link: https://lore.kernel.org/r/20230829184735.2841739-5-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We read the downstream port count and capability info but never use it
anywhere. Remove 'ds_port_cnt' and 'ds_cap_info' and any associated code
from this driver. Fold the check for 'dfp_present' into a call to
drm_dp_is_branch() at the one place it is used to get rid of any member
storage related to downstream ports.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554984/
Link: https://lore.kernel.org/r/20230829184735.2841739-4-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Use the common function drm_dp_read_sink_count() instead of open-coding
it. This shrinks the kernel text a tiny bit.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554983/
Link: https://lore.kernel.org/r/20230829184735.2841739-3-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This function duplicates the common function drm_dp_read_dpcd_caps().
The array of DPCD registers filled in is one size larger than the
function takes, but from what I can tell that extra byte was never used.
Resize the array and use the common function to reduce the code here.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554981/
Link: https://lore.kernel.org/r/20230829184735.2841739-2-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move the setting of dpu_enc::wide_bus_en to
dpu_encoder_virt_atomic_enable() so that it mirrors how dpu_enc::dsc
is being set.
Since wide bus for DSI is related to DSC, having it mirror how DSC
is set in DPU will also make it easier to accommodate for the possibility
of DSC for DSI being set during runtime in the future.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/553759/
Link: https://lore.kernel.org/r/20230822-add-widebus-support-v4-1-9dc86083d6ea@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551872/
Link: https://lore.kernel.org/r/20230809034445.434902-4-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In order to simplify IRQ declarations, shift IRQ indices by 1. This
makes 0 the 'no IRQ' value. Thanks to this change, we do no longer have
to explicitly set the 'no interrupt' fields in catalog structures.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550938/
Link: https://lore.kernel.org/r/20230802100426.4184892-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, dpu_plane_atomic_check() does not check whether the
plane can process the image without exceeding the per chipset
limits for MDP clock. This leads to underflow issues because the
SSPP is not able to complete the processing for the data rate of
the display.
Fail the dpu_plane_atomic_check() if the SSPP cannot process the
image without exceeding the MDP clock limits.
changes in v2:
- use crtc_state's adjusted_mode instead of mode
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/556819/
Link: https://lore.kernel.org/r/20230911221627.9569-1-quic_abhinavk@quicinc.com
