new drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing
-----BEGIN PGP SIGNATURE-----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=ocVM
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.
Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.
Fix warning when initializing display:
xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
------------[ cut here ]------------
xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))
And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6a2a90cba1)
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
=HouD
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-04-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
# v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
# vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
# =HouD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_device_types.h
# drivers/gpu/drm/xe/xe_vm.c
# drivers/gpu/drm/xe/xe_vm_types.h
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
We have observed underruns on some platforms if the CFB offset is within
the first page of stolen. Just like i915 skip the first page.
v2 (Maarten)
- Also align the start.
BSpec: 50214
Reported-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412150301.273344-4-matthew.auld@intel.com
BMG is a discrete GPU based on the Xe2 architecture.
No device ids are bound to the BMG platform descriptor yet.
BMG device ids will be added once we have all the basic required
platform enabling patches landed.
v2: Removed device ids, deferring it to a later patch
v3: Squash in compat header IS_BATTLEMAGE() patch. (Lucas)
Bspec: 68090
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170545.3769566-4-balasubramani.vivekanandan@intel.com
All the users are in display, move the fixed point header under
display. We could also consider making these more general purpose
things, but that takes a bunch more effort. This allows the immediate
cleanup of xe compat i915_fixed.h.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/320c451e116c7807e544a50c67ba79b087a4f218.1712345787.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The flags stored in the BO grew over time without following
much a naming pattern. First of all, get rid of the _BIT suffix that was
banned from everywhere else due to the guideline in
drivers/gpu/drm/i915/i915_reg.h that xe kind of follows:
Define bits using ``REG_BIT(N)``. Do **not** add ``_BIT`` suffix to the name.
Here the flags aren't for a register, but it's good practice to keep it
consistent.
Second divergence on names is the use or not of "CREATE". This is
because most of the flags are passed to xe_bo_create*() family of
functions, changing its behavior. However, since the flags are also
stored in the bo itself and checked elsewhere in the code, it seems
better to just omit the CREATE part.
With those 2 guidelines, all the flags are given the form
XE_BO_FLAG_<FLAG_NAME> with the following commands:
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i \
-e "s/XE_BO_\([_A-Z0-9]*\)_BIT/XE_BO_\1/g" \
-e 's/XE_BO_CREATE_/XE_BO_FLAG_/g'
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i -r \
-e 's/XE_BO_(DEFER_BACKING|SCANOUT|FIXED_PLACEMENT|PAGETABLE|NEEDS_CPU_ACCESS|NEEDS_UC|INTERNAL_TEST|INTERNAL_64K|GGTT_INVALIDATE)/XE_BO_FLAG_\1/g'
And then the defines in drivers/gpu/drm/xe/xe_bo.h are adjusted to
follow the coding style.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322142702.186529-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PCI IDs for PVC were never added and platform always marked with
force_probe. Drop what's not used and rename some places as needed.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PCI IDs for XEHPSDV were never added and platform always marked with
force_probe. Drop what's not used and rename some places to either be
xehp or dg2, depending on the platform/IP checks.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Some of the backported intel_uncore_read*() functions used the wrong
types. Change the function declarations accordingly.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314065221.1181158-1-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Introduce the resume and get to fulfill the display need for checking
if the device was actually resumed (or it is awake) and the reference
was taken.
Then we can convert the remaining cases to a void function and have
individual functions for individual cases.
Also, already start this new function protected from the runtime
recursion, since runtime_pm will need to call for display functions
for a proper D3Cold flow.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240301180526.643505-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
i915's intel_runtime_pm_get_if_in_use actually calls the
pm_runtime_get_if_active() with ign_usage_count = false, but Xe
was erroneously calling it with true because of the mem_access cases.
This can lead to unnecessary references getting hold here and device
never getting into the runtime suspended state.
Let's use directly the 'if_in_use' function provided by linux/pm_runtime.
Also, already start this new function protected from the runtime
recursion, since runtime_pm will need to call for display functions
for a proper D3Cold flow.
v2: Update commit message based on Matt's feedback.
Fix return condition of pm_runtime_get_if_in_use (Matt)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240301180526.643505-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
shmem ensures the memory is cleared on allocation, however here we are
using TTM, which doesn't natively support shmem (other than for swap),
but instead just allocates normal system memory. And we only zero such
memory for userspace allocations. In the case of intel_fbdev we are
missing the memset_io() since display path incorrectly thinks object is
shmem based.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205153110.38340-2-matthew.auld@intel.com
readq() is not available in 32bits and i915_gem_object_read_from_page()
is supposed to allow reading arbitrary sizes determined by the `size`
argument. Currently the only caller only passes a size == 8 so the
second problem is not that big. Migrate to calling
memcpy()/memcpy_fromio() to allow possible changes in the display side
and to fix the build on 32b architectures.
v2: Use memcpy/memcpy_fromio directly rather than using iosys-map with
the same size == 8 bytes restriction (Matt Roper)
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119001612.2991381-4-lucas.demarchi@intel.com
drm_gem_private_object_init expect the object size be page size
aligned. The xe_bo create functions do not update the size for
any alignment requirements. So align cfb size to be page size
aligned in xe stolen memory handling.
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240112092803.61664-2-vinod.govindapillai@intel.com
Now intel_wakeref_t is a unsigned long and Xe KMD version of those
functions should use the same type, so changing from bool to
intel_wakeref_t.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
i915 defines it as unsigned long so Xe should do the same to avoid
compilation warnings:
CC [M] drivers/gpu/drm/i915/i915_gem.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_power_well.o
In file included from ./include/drm/drm_mm.h:51,
from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h:15,
from drivers/gpu/drm/i915/display/intel_display_power.c:8:
drivers/gpu/drm/i915/display/intel_display_power.c: In function ‘print_async_put_domains_state’:
drivers/gpu/drm/i915/display/intel_display_power.c:408:29: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=]
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
409 | power_domains->async_put_wakeref);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| int
./include/drm/drm_print.h:410:39: note: in definition of macro ‘drm_dev_dbg’
410 | __drm_dev_dbg(NULL, dev, cat, fmt, ##__VA_ARGS__)
| ^~~
./include/drm/drm_print.h:510:33: note: in expansion of macro ‘drm_dbg_driver’
510 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:9: note: in expansion of macro ‘drm_dbg’
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:50: note: format string is defined here
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ~~^
| |
| long unsigned int
| %u
CC [M] drivers/gpu/drm/i915/i915_gem_evict.o
CC [M] drivers/gpu/drm/i915/i915_gem_gtt.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_trace.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_wa.o
CC [M] drivers/gpu/drm/i915/i915_query.o
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Xe is not carrying frontbuffer pointer in xe_bo. Define it's getter as
NULL. Setter simply returns pointer which was provided as a
parameter.
v3: Do not take any references
v2: Handle xe_bo_put as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We accidentally always pass true as s2idle argument, instead of
calculating it in the same way as i915.
Suspend modes were removed to achieve compatibility with i915, but
accidentally left in the source code.
While at it, fix all other cases too, s2idle will go into a D1 state and
setting a lower power state should be handled by PCI core.
Maybe my laptop stops draining so much power during suspend now? I can
only hope..
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there.
We do this by recompiling i915/display code twice.
Now that i915 has been adapted to support the Xe build, we can add
the xe/display support.
This initial work is a collaboration of many people and unfortunately
this squashed patch won't fully honor the proper credits.
But let's try to add a few from the squashed patches:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
