Instead of allowing the driver to load with incomplete sysfs entries in
case of sysfs creation failure, we should terminate the driver loading.
This change ensures that the status of all gt associated sysfs entries
creation is relayed to xe_gt_init, leading to a driver load abort if any
sysfs creation failures occur.
-v2
use err_force_wake label instead of new. (Lucas)
Avoid unnecessary warn/error messages. (Lucas)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-6-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The drmm_add_action_or_reset function automatically invokes the action
(sysfs removal) in the event of a failure; therefore, there's no
necessity to call it within the return check.
Modify the return type of xe_gt_ccs_mode_sysfs_init to int, allowing the
caller to pass errors up the call chain. Should sysfs creation or
drmm_add_action_or_reset fail, error propagation will prompt a driver
load abort.
-v2
Edit commit message (Nikula/Lucas)
use err_force_wake label instead of new. (Lucas)
Avoid unnecessary warn/error messages. (Lucas)
Fixes: f3bc5bb4d5 ("drm/xe: Allow userspace to configure CCS mode")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Instead of assigning the value of drmm_add_action_or_reset() to err and
returning err in case of failure and 0 in case of success, simply return
the result of drmm_add_action_or_reset().
-v2:
cleanup in xe_display too.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
xe_pm_init is the very last thing during the xe_pci_probe(),
hence these protections are useless from the point of view
of ensuring that the device is awake.
Let's remove it so we continue towards the goal of killing
xe_device_mem_access.
v2: Adding more cases
v3: Provide a separate fix for xe_tile_init_noalloc return (Matt)
Adding a new case where display HDCP init calls which
are also called at display probe time.
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The PF driver must maintain additional GT level data per each VF.
This additional per-VF data will be added in upcoming patches and
will include: provisioning configuration (like GGTT space or LMEM
allocation sizes or scheduling parameters), monitoring thresholds
and counters, and more.
As number of supported VFs varies across platforms use flexible
array where first entry will contain metadata for the PF itself
(if such configuration parameter is applicable for the PF) and
all remaining entries will contain data for potential VFs.
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-6-michal.wajdeczko@intel.com
init_steering_dss need topology dss mask to be init ahead.
Fixed by moving xe_gt_topology_init ahead of xe_gt_mcr_init
Fixes: bf8ec3c3e8 ("drm/xe: Initialize GuC earlier during probe")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227164922.281346-2-zhanjun.dong@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We need to ensure that device is in D0 on any kind of GT reset.
We are likely already protected by outer bounds like exec,
but if exec/sched ref gets dropped on a hang, we might transition
to D3 before we are able to perform the gt_reset and recover.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222163937.138342-13-rodrigo.vivi@intel.com
At these points, we are sure that device is awake in D0.
Likely in the middle of the transition, but awake. So,
these extra protections are useless. Let's remove it and
continue with the killing of xe_device_mem_access.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222163937.138342-12-rodrigo.vivi@intel.com
SR-IOV VF has limited access to MMIO registers. Fortunately, it is able
to access a curated subset that is needed to initialize the driver by
communicating with SR-IOV PF using GuC CT.
Initialize GuC earlier in order to keep the unified probe ordering
between VF and PF modes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219130530.1406044-4-michal.winiarski@intel.com
SLPC is not used at "hwconfig" stage. Move the initialization of data
structures used for SLPC to a later point in probe.
Also - move the xe_guc_pc_init_early to happen just prior to initial
"hwconfig" load.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219130530.1406044-3-michal.winiarski@intel.com
Bring changes from drm-misc-next that got merged in drm-next back to
drm-xe so they can be used for additional features.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
For integrated devices we need to map both mem.kernel_bb_pool and
usm.bb_pool to be able to run batches from both pools.
Fixes: a682b6a42d ("drm/xe: Support device page faults on integrated platforms")
Tested-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202033440.2351862-1-matthew.brost@intel.com
Although we've stored the major and minor versions for graphics/media in
xe_device, it will be simpler to implement the uapi version query if we
also stash the raw register value in the GT itself.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123204454.246788-4-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
The GSC uC needs to communicate with the CSME to perform certain
operations. Since the GSC can't perform this communication directly on
platforms where it is integrated in GT, the graphics driver needs to
transfer the messages from GSC to CSME and back. The proxy flow must be
manually started after the GSC is loaded to signal to GSC that we're
ready to handle its messages and allow it to query its init data from
CSME.
Note that the component must be removed before the pci_remove call
completes, so we can't use a drmm helper for it and we need to instead
perform the cleanup as part of the removal flow.
v2: add function documentation, more targeted memory clear, clearer logs
and variable names (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117182621.2653049-2-daniele.ceraolospurio@intel.com
Setting of exec_queue user extensions is moved from the end of the ioctl
function earlier, into __xe_exec_queue_alloc().
This fixes bug in that the USM attributes for access counters were being
applied too late, and effectively were ignored.
However, in order to apply user extensions this early, we can no longer
call q->ops functions. Instead, make it more efficient. The user extension
functions can simply update the q->sched_props values and they will be
applied by the backend during q->ops->init().
v2: minor changes for readability (Matt)
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
This kernel uevent is getting removed for now. It will come
back later with a better future proof name.
v2: Rebase (Francois Dugast)
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
PMU uapi is likely to change in the future. Till the uapi is finalized,
remove PMU from Xe. PMU can be re-added after uapi is finalized.
v2: Include xe_drm.h in xe/tests/xe_dma_buf.c (Francois)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Goals of this new xe_gt_freq component:
1. Detach sysfs controls and raw freq management from GuC SLPC.
2. Create a directory that could later be aligned with devfreq.
3. Encapsulate all the freq control in a single directory. Although
we only have one freq domain per GT, already start with a numbered
freq0 directory so it could be expanded in the future if multiple
domains or PLL are needed.
Note: Although in the goal #1, the raw freq management control is
mentioned, this patch only starts by the sysfs control. The RP freq
configuration and init freq selection are still under the guc_pc, but
should be moved to this component in a follow-up patch.
v2: - Add /tile# to the doc and remove unnecessary kobject_put (Riana)
- s/ssize_t/int on some ret variables (Vinay)
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rename supports_mmio_ext and supports_usm to use a has_ prefix so the
flags are grouped together. This settles on just one variant for
positive info matching ("has_") and one for negative ("skip_").
Also make sure the has_* flags are grouped together in xe_pci.c.
Reviewed-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231205145235.2114761-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The Local Memory Translation Table (LMTT) provides additional
abstraction for Virtual Functions (VF) accessing device VRAM.
This code is based on prior work of Michal Winiarski.
In this patch we focus only on LMTT initialization. Remaining LMTT
functions will be used once we add a VF provisioning to the PF.
Bspec: 44117, 52404, 59314
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20231128151507.1015-4-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Allow user to configure the CCS mode setting through a
'ccs_mode' sysfs interface. Also report the current
CCS mode configuration and number of compute slices
available through this interface.
v2: Rebase, make it platform agnostic
v3: Separte out num_cslices sysfs interface and make
xe_gt_ccs_mode_sysfs_init() return void
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Disable dynamic HW load balancing of compute resource assignment
to engines and instead enabled fixed mode of mapping compute
resources to engines on all platforms with more than one compute
engine.
By default enable only one CCS engine with all compute slices
assigned to it. This is the desired configuration for common
workloads.
PVC platform supports only the fixed CCS mode (workaround 16016805146).
v2: Rebase, make it platform agnostic
v3: Minor code refactoring
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Earlier GuC load will require more fine-grained control over reset.
Extract it outside of xe_uc_init_hw.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GuC will need to be loaded earlier during probe. And in order to load
GuC, being able to take the forcewake is going to be needed.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Prep this file to contain C6 toggling as well instead
of just sysfs related stuff.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When the GSC FW is loaded, we need to inform it when a GSCCS reset is
coming and then wait 200ms for it to get ready to process the reset.
v2: move WA code to GSC file, use variable in Makefile (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After noticing in logs there were still mentions to GEN6 registers, it
was clear commit d9b79ad275 ("drm/xe: Drop gen afixes from registers")
didn't take care of all the afixes. Some were added later, but there are
also constants and strings still using that. Continue the cleanup
removing the remaining ones.
To keep it consistent with code nearby, a few other changes are made:
- Remove prefix in INTEL_LEGACY_64B_CONTEXT
- Remove GEN8_CTX_L3LLC_COHERENT since it's unused
- Rename GEN9_FREQ_SCALER to GT_FREQUENCY_SCALER
v2: Use XELP_ as prefix for NUM_MOCS_ENTRIES and remove changes to
MOCS_ENTRIES as this is now done as part of a previous commit
(Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231117174049.527192-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most constants defined in xe_drm.h use DRM_XE_ as prefix which is
helpful to identify the name space. Make this systematic and add
this prefix where it was missing.
v2:
- fix vertical alignment of define values
- remove double DRM_ in some variables (José Roberto de Souza)
v3: Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting GT freq is usually RPn. Raising freq to RP0 will
help speed up GuC load times. As an example, this data was
collected on DG2-
GuC Load time @RPn ~ 41 ms
GuC Load time @RP0 ~ 11 ms
v2: Raise GT freq before hwconfig init. This will speed up
both HuC and GuC loads. Address review comments (Rodrigo).
Also add a small usleep after requesting frequency which gives
pcode some time to react.
v3: Address checkpatch issue
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Driver initiated function-reset (FLR) is the highest level of reset
that we can trigger from within the driver. In contrast to PCI FLR it
doesn't require re-enumeration of PCI BAR. It can be useful in case
GT fails to reset. It is also the only way to trigger GSC reset from
the driver and can be used in future addition of GSC support.
v2:
- use regs from xe_regs.h
- move the flag to xe.mmio
- call flr only on root gt
- use BIOS protection check
- copy/paste comments from i915
v3:
- flr code moved to xe_device.c
v4:
- needs_flr_on_fini moved to xe_device
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When recording the default LRC, the expectation is that the hardware's
original state settings (both register and instruction) will be written
out to the LRC upon first context switch. For many 3DSTATE_* state
instructions that don't truly have "default" values, this translates to
a simple instruction header (opcodes + dword length) being written to
the LRC, followed by an appropriate number of blank dwords as a place
holder. When userspace creates a context (which starts as a copy of the
default LRC), they'll generally emit real 3DSTATE_* as part of their
initialization to select the settings they desire. If they don't emit
one of the 3DSTATE instructions, then the zeroed dwords that remain in
their LRC image generally translate to various state remaining disabled.
This will either be what userspace wants or will lead to very
reproducible and easily-debugged problems (rendering glitches, engine
hangs).
It turns out that a subset of the 3DSTATE instructions, specifically
those belonging to the SVG (State Variable - Global) unit, are not only
emitting 0's for the instruction's "body" dwords, but also for the
instruction header dword if no specific state has been explicitly set
before context switch. This means that when the hardware switches to a
context that hasn't explicitly provided an appropriate state setting,
the hardware will just see a sequence of NOOPs in the spot reserved for
that 3DSTATE instruction while executing the LRC, and the actual
hardware state setting will unintentionally inherit the configuration
used by the previously running context. Now when userspace makes a
mistake and forgets to emit an important state instruction they no
longer get consistent, easily-reproducible corruption/hangs, but rather
erratic behavior where the presence/absence of a problem depends on what
other workloads are running on the system and what order the contexts
are scheduled on the engine.
A specific example of this that came up recently related to mesh shading
The OpenGL driver was not specifically emitting a 3DSTATE_MESH_CONTROL
to disable mesh shading at context init, so on context switch, mesh
shading would either be on or off depending on what the previous context
had been doing. Vulkan apps _were_ enabling mesh shading, so running a
Vulkan app and then context switching to an OpenGL app resulted in mesh
shading still unexpectedly being enabled during OpenGL operation, and
since other Mesh-related state was not properly initialized for that
context a GPU hang was seen. Due to the specific ordering requirements
(Vulkan app runs first, followed by OpenGL app), it took additional
debug effort to track down the cause of the problem.
There are various workarounds related to this behavior, with current
implementations handled in the userspace drivers. E.g., Wa_14019789679
and Wa_22018402687. However it's been suggested that the kernel driver
can help simplify things here by emitting zeroed SVG state with proper
instruction headers as part of our default context creation (i.e., at
the same point we apply LRC workarounds). This will help ensure that
any future cases where a userspace driver does not emit an important
state setting will result in consistent behavior.
Bspec: 46261
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20231025151732.3461842-7-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On some platforms we need to emit some non-register state while
recording an engine class' default LRC. Add the infrastructure to
support this; actual per-platform tables will be added in future
patches.
v2:
- Checkpatch whitespace fix
- Add extra assertion to ensure num_dw != 0. (Bala)
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20231025151732.3461842-6-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Extracting the common MI_* instructions that can be used with any engine
to their own header will make it easier as we add additional engine
instructions in upcoming patches.
Also, since the majority of GPU instructions (both MI and non-MI) have
a "length" field in bits 7:0 of the instruction header, a common define
is added for that. Instruction-specific length fields are still defined
for special case instructions that have larger/smaller length fields.
v2:
- Use "instr" instead of "inst" as the short form of "instruction"
everywhere. (Lucas)
- Include xe_reg_defs.h instead of the i915 compat header. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-12-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Keeping the number of registers to be loaded as a separate macro from
the instruction opcode will simplify some upcoming LRC parsing code.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-10-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When failing on early initialization, one cause may be that the PAT
configuration is not correct. Dump it for ease of debugging.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231006182325.3617685-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When working without GuC (i.e. working with execlists), the flow
attempts to perform suspend operation which is failing due to a
lack of support without GuC.
If PM ops are not supported without GuC we may as well avoid PM
registration rather than returning errors from various PM flows.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The guc_submission_enabled() function is being used as a boolean toggle
for all firmwares and all related features, not just GuC submission. We
could add additional flags/functions to distinguish and allow different
use-cases (e.g. loading HuC but not using GuC submission), but given
that not using GuC is a debug-only scenario having a global switch for
all FWs is enough. However, we want to make it clear that this switch
turns off everything, so rename it to uc_enabled().
v2: rebase on s/XE_WARN_ON/xe_assert
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The XE_WARN_ON macro maps to WARN_ON which is not justified
in many cases where only a simple debug check is needed.
Replace the use of the XE_WARN_ON macro with the new xe_assert
macros which relies on drm_*. This takes a struct drm_device
argument, which is one of the main changes in this commit. The
other main change is that the condition is reversed, as with
XE_WARN_ON a message is displayed if the condition is true,
whereas with xe_assert it is if the condition is false.
v2:
- Rebase
- Keep WARN splats in xe_wopcm.c (Matt Roper)
v3:
- Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix 2 issues when writing LRC workarounds by copying the same handling
done when processing other RTP entries:
For masked registers, it was not correctly setting the upper 16bits.
Differently than i915, the entry itself doesn't set the upper bits
for masked registers: this is done when applying them. Testing on ADL-P:
Before:
[drm:xe_gt_record_default_lrcs [xe]] LRC WA rcs0 save-restore MMIOs
[drm:xe_gt_record_default_lrcs [xe]] REG[0x2580] = 0x00000002
...
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7018] = 0x00002000
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7300] = 0x00000040
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7304] = 0x00000200
After:
[drm:xe_gt_record_default_lrcs [xe]] LRC WA rcs0 save-restore MMIOs
[drm:xe_gt_record_default_lrcs [xe]] REG[0x2580] = 0x00060002
...
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7018] = 0x20002000
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7300] = 0x00400040
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7304] = 0x02000200
All of these registers are masked registers, so writing to them without
the relevant bits in the upper 16b doesn't have any effect.
Also, this adds support to regular registers; previously it was assumed
that LRC entries would only contain masked registers. However this is
not true. 0x6604 is not a masked register, but used in workarounds for
e.g. ADL-P. See commit 28cf243a34 ("drm/i915/gt: Fix context
workarounds with non-masked regs"). In the same test with ADL-P as
above:
Before:
[drm:xe_gt_record_default_lrcs [xe]] REG[0x6604] = 0xe0000000
After:
[drm:xe_gt_record_default_lrcs [xe]] REG[0x6604] = 0xe0efef6f
As can be seen, now it will read what was in the register rather than
completely overwrite the other bits.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230906012053.1733755-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Just like the GT and engine workarounds, add debug message with the
final value being written to the register for easy debugging.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230906012053.1733755-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The current only submission in the driver that doesn't use a vm is the
WA setup. We still pass a vm structure (the migration one), but we don't
actually use it at submission time and we instead have an hack to use
GGTT for this particular engine.
Instead of special-casing the WA engine, we can skip providing a VM and
use that as selector for whether to use GGTT or PPGTT. As part of this
change, we can drop the special engine flag for the WA engine and switch
the WA submission to use the standard job functions instead of dedicated
ones.
v2: rebased on s/engine/exec_queue
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230822173334.1664332-4-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add engines sysfs directory under its GT and
create sub directory for all engine class
(note its not per instance) present on GT.
For example,
DUT# cat /sys/class/drm/cardX/device/tileN/gtN/engines/
bcs/ ccs/
V9 :
- Add missing drmm_add_action_or_reset
V8 :
- Rebase
V7 :
- Remove xe_gt.h from .h and include in .c - Matt
V6 :
- Add kernel doc and arrange file in make file by alphabet - Matt
V5 :
- replace xe_engine with xe_hw_engine - Matt
V4 :
- Rebase to resolve conflicts - CI
V3 :
- Move code in its own file
- Rename API name
V2 :
- Correct class mask logic - Himal
- Remove extra parenthesis
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Engine was inappropriately used to refer to execution queues and it
also created some confusion with hardware engines. Where it applies
the exec_queue variable name is changed to q and comments are also
updated.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/162
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is a preparation commit for a larger renaming of engine to exec queue.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Send uevent in case of gt reset failure. This intimation can be used by
userspace monitoring tool to do the device level reset/reboot
when GT reset fails. udevadm can be used to monitor the uevents.
v2:
- Support only gt failure notification (Rodrigo)
v3
- Rectify the comments in header file.
v4
- Use pci kobj instead of drm kobj for notification.(Rodrigo)
- Cleanup (Badal)
v5
- Add tile id and gt id as additional info provided by uevent.
- Provide code documentation for the uevent. (Rodrigo)
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
