- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
=HouD
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-04-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
# v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
# vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
# =HouD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_device_types.h
# drivers/gpu/drm/xe/xe_vm.c
# drivers/gpu/drm/xe/xe_vm_types.h
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
Rather than trying to identify exactly which engines are available on
each platform in the IP descriptor, just include the list of all media
engines that the IP could theoretically support (i.e., 8 VCS + 4 VECS).
We still rely on the media fuse registers to tell us which specific
engine instances are actually present on a given platform, so there
shouldn't be any functional change. This will help prevent mistakes
with engine numbering (for example ambiguity about whether the 2nd VCS
engine on a platform with exactly two engines is numbered "VCS1" or
"VCS2") and will also future-proof the code a bit more in case new SKUs
or platform refreshes extend the engine list in the future.
Note that the media fuse register technically has an 8-bit field for
VECS engine presence starting on Xe2. However there's still no MMIO
register range reserved for VE engines above VECS3, so VE0-VE3 is still
consider the "maximum" VE engine mask that the driver can support for
now.
Bspec: 52614, 52615, 62567
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417152621.3357990-2-matthew.d.roper@intel.com
xe_pm_init may encounter failures for various reasons, such as a failure
in initializing drmm_mutex, or when dealing with a d3cold-capable device
for vram_threshold sysfs creation and setting default threshold.
Presently, all these potential failures are disregarded.
Move d3cold.lock initialization to xe_pm_init_early and cause driver
abort if mutex initialization has failed.
For xe_pm_init failures cleanup the driver and return error code
-v2
Make mutex init cleaner (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-8-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
BMG is a discrete GPU based on the Xe2 architecture.
No device ids are bound to the BMG platform descriptor yet.
BMG device ids will be added once we have all the basic required
platform enabling patches landed.
v2: Removed device ids, deferring it to a later patch
v3: Squash in compat header IS_BATTLEMAGE() patch. (Lucas)
Bspec: 68090
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170545.3769566-4-balasubramani.vivekanandan@intel.com
Xe2_HPM uses the same general feature flags as Xe2_LPM. Xe2_HPM is
identified as version 13.01 in the GMD_ID register.
Bspec: 68090, 67163
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170545.3769566-3-balasubramani.vivekanandan@intel.com
Xe2_HPG uses the same general feature flags as Xe2_LPG. Xe2_HPG is
identified as version 20.01 in the GMD_ID register.
Bspec: 68090
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170545.3769566-2-balasubramani.vivekanandan@intel.com
SR-IOV mode detection requires access to the MMIO register and
this can be done now in xe_device_probe_early().
We can also drop explicit has_sriov parameter as this flag is now
already available from xe->info.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327182740.407-3-michal.wajdeczko@intel.com
Enable display support for Lunar Lake.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-9-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Graphics version 12.74 (which is technically called "Xe_LPG+") should be
handled the same as versions Xe_LPG 12.70/12.71 by the KMD. Only the
workaround lists (handled in the next patch) will be a bit different.
Bspec: 55420
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229070806.3402641-2-dnyaneshwar.bhadane@intel.com
There are very few places that need to include anything from under
display/. Require the display/ prefix in #include directives, and drop
the subdirectory from the header search path.
Sort the include lists while at it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122101428.2683468-2-jani.nikula@intel.com
When xe2 support started to be added, USM was still not functional. This
has changed, and now USM can be enabled for xe2. Remove FIXME leftover
to allow VM to be created with DRM_XE_VM_CREATE_FLAG_FAULT_MODE.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129214510.123829-1-lucas.demarchi@intel.com
Release all mmap mappings for all vram objects which are associated
with userfault such that, while pcie function in D3hot, any access
to memory mappings will raise a userfault.
Upon userfault, in order to access memory mappings, if graphics
function is in D3 then runtime resume of dgpu will be triggered to
transition to D0.
v2:
- Avoid iomem check before bo migration check as bo can migrate
to system memory (Matthew Auld)
v3:
- Delete bo userfault link during bo destroy
- Upon bo move (vram-smem), do bo userfault link deletion in
xe_bo_move_notify instead of xe_bo_move (Thomas Hellström)
- Grab lock in rpm hook while deleting bo userfault link (Matthew Auld)
v4:
- Add kernel doc and wrap vram_userfault related
stuff in the structure (Matthew Auld)
- Get rpm wakeref before taking dma reserve lock (Matthew Auld)
- In suspend path apply lock for entire list op
including list iteration (Matthew Auld)
v5:
- Use mutex lock instead of spin lock
v6:
- Fix review comments (Matthew Auld)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #For the xe_bo_move_notify() changes
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20240104130702.950078-1-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Several files were including register headers that they no longer
require. Drop the unnecessary includes to reduce build dependencies.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231214184659.2249559-18-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rename supports_mmio_ext and supports_usm to use a has_ prefix so the
flags are grouped together. This settles on just one variant for
positive info matching ("has_") and one for negative ("skip_").
Also make sure the has_* flags are grouped together in xe_pci.c.
Reviewed-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231205145235.2114761-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently it's not possible to test the WAs for platforms using gmdid
since they don't have the IP information on the descriptor struct. In
order to allow that, add a stub function for read_gmdid() that is
activated when the test executes, replacing the iomap and read of the
real register.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129232807.1499826-5-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20231205133954.2089546-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From the CI logs we want to easily know if the machine is capable and
allowed to enter d3cold, and can therefore potentially trigger the
d3cold RPM suspend and resume path.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that MMIO init got moved to device early, we can use regular
xe_mmio_read helpers to get to GMD_ID register.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
SR-IOV VF doesn't have access to MMIO registers used to determine
graphics/media ID. It can however communicate with GuC.
Introduce xe_device_probe_early, which initializes enough HW to use
MMIO GuC communication.
This will allow both VF and PF/native driver to have unified probe
ordering.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It also merges the GT (which is part of tile) initialization happening
at xe_info_init with allocating other per-tile data structures into a
common helper function.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Parts of xe_info_init are only dealing with processing driver_data.
Extract it into xe_info_init_early to be able to use it earlier during
probe.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe uses devres for most of its driver-lifetime resources, use it for pci
device as well.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-3-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
DRM device used by Xe is managed, which means that final ref will be
dropped on driver detach.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-2-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Per device, set this flag to access the MTCFG register or to skip it.
This is done to standardise Xe driver naming if an access to any HW
should be avoided.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Per device, set this flag to enable access to the PCODE uC or to skip it.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This flag can be used to disable GuC based power management. This
could be used for debug or comparison to host based C6.
v2: Fix missing definition
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the GSCCS to the media_xelpmp engine list. Note that since the
GSCCS is only used with the GSC FW, we can consider it disabled if we
don't have the FW available.
v2: mark GSCCS as allowed on the media IP in kunit tests
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Encapsulate all the module parameters in one single global struct
variable. This also removes the extra xe_module.h from includes.
v2: naming consistency as suggested by Jani and Lucas
v3: fix checkpatch errors/warnings
v4: adding blank line after struct declaration
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bommithi Sakeena <bommithi.sakeena@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We already print some basic information about the device, add
virtualization information, until we expose that elsewhere.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231115073804.1861-3-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We will be adding support for the SR-IOV and driver might be then
running, in addition to existing non-virtualized bare-metal mode,
also in Physical Function (PF) or Virtual Function (VF) mode.
Since these additional modes require some changes to the driver,
define enum flag to represent different SR-IOV modes and add a
function where we will detect the actual mode in the runtime.
We start with a forced bare-metal mode as it is sufficient to
enable basic functionality and ensures no impact to existing code.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231115073804.1861-2-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The Single Root I/O Virtualization (SR-IOV) extension to
the PCI Express (PCIe) specification suite is supported
starting from 12th generation of Intel Graphics processors.
Add a device flag that we will use to enable SR-IOV specific
code paths and to indicate our readiness to support SR-IOV.
We will enable this flag for the specific platforms once all
required changes and additions will be ready and merged.
Bspec: 52391
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231115073804.1861-1-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We accidentally always pass true as s2idle argument, instead of
calculating it in the same way as i915.
Suspend modes were removed to achieve compatibility with i915, but
accidentally left in the source code.
While at it, fix all other cases too, s2idle will go into a D1 state and
setting a lower power state should be handled by PCI core.
Maybe my laptop stops draining so much power during suspend now? I can
only hope..
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there.
We do this by recompiling i915/display code twice.
Now that i915 has been adapted to support the Xe build, we can add
the xe/display support.
This initial work is a collaboration of many people and unfortunately
this squashed patch won't fully honor the proper credits.
But let's try to add a few from the squashed patches:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Let's have a single GT ID per GT within the PCI Device Card.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Mark support of MEI-GSC interaction per device.
Add has_heci_gscfi indication to xe_device and xe_pci structures.
Mark DG1 and DG2 devices as supported.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Besides the regular MMIO space that exists by default, MMIO
extension support & MMIO extension tile size should both be
defined per device, and updated from the device's descriptor.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Moti Haimovski <mhaimovski@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Skip reading this register as it is not relevant in the new devices.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Moti Haimovski <mhaimovski@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add RPLS support that was missing apart from the PCI IDs.
v2: Also add the support in xe_wa_test kunit
v3: rebased.
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>(v1)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231005205450.3177354-4-anusha.srivatsa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
i915 now uses full names for platforms. So we now have
ALDERLAKE instead of ADL. Extend this to xe driver as well.
This will make it easier for macro magic usages.
v2: Do not make changes to compat-i915-headers/i915_drv.h
file with the rest of the changes (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231005205450.3177354-3-anusha.srivatsa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On platforms with multiple BCS engines (i.e., PVC and Xe2), not all BCS
engines are created equal. The BCS0 engine is what the specs refer to
as a "resource copy engine," which supports the platform's full set of
copy/fill instructions. In contast, the non-BCS0 "service copy" engines
are more streamlined and only support a subset of the GPU instructions
supported by the resource copy engine. Platforms with both types of
copy engines always support the MEM_COPY and MEM_SET instructions which
can be used for simple copy and fill operations on either type of BCS
engine. Since the simple MEM_SET instruction meets the needs of Xe's
migrate code (and since the more elaborate XY_FAST_COLOR_BLT instruction
isn't available to use on service copy engines), we always prefer to use
MEM_SET for clearing buffers on our newer platforms.
We've been using a 'has_link_copy_engine' feature flag to keep track of
which platforms should use MEM_SET for fills. However a feature flag
like this is unnecessary since we can already derive the presence of
service copy engines (and in turn the MEM_SET instruction) just by
looking at the platform's pre-fusing engine list. Utilizing the engine
list for this also avoids mistakes like we've made on Xe2 where we
forget to set the feature flag in the IP definition.
For clarity, "service copy" is a general term that covers any blitter
engines that support a limited subset of the overall blitter instruction
set (in practice this is any non-BCS0 blitter engine). The "link copy
engines" introduced on PVC and the "paging copy engine" present in Xe2
are both instances of service copy engines.
v2:
- Rewrite / expand the commit message. (Bala)
- Fix checkpatch whitespace error.
Bspec: 65019
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Link: https://lore.kernel.org/r/20230927205143.2695089-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As a preparation for msix support, changing for new msi irq api
which supports both msi and msix.
Reviewed-by: Ohad Sharabi <osharabi@habana.ai>
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rebase fixes by Rodrigo]
This fixes the build without CONFIG_PM_SLEEP such as for riscv.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Matches i915. Assumption going forward is that non-llc + igpu is only a
thing on MTL+ which should have explicit coherency pat_index settings
for COH_NONE, 1WAY and 2WAY.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
LNL is an integrated GPU based on the Xe2 architecture.
Bspec: 70821
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting with Xe2, a 5-level page table is always used, regardless of
the actual virtual address range supported by the platform. The two
values need to be tracked separately in the device descriptor since Xe2
platforms only have a 48 bit virtual address range.
Bspec: 59505, 65637, 70817
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe2_LPM media is represented by GMD_ID value 20.00.
It provides 1 VD + 1 VE + 1 SFC.
Bspec: 70821, 70819
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Define a common set of Xe2 graphics feature flags and definitions that
will be used for all platforms in this family.
Several of the feature flags are inherited unchanged from Xe_HP and/or
Xe_HPC platforms:
- dma_mask_size remains 46 (Bspec 70817)
- supports_usm=1 (Bspec 59651)
- has_flatccs=1 (Bspec 58797)
- has_asid=1 (Bspec 59654, 59265, 60288)
- has_range_tlb_invalidate=1 (Bspec 71126)
However some of them still need proper implementation in the driver to
be used, so they are disabled.
Notable Xe2-specific changes:
- All Xe2 platforms use a five-level page table, regardless of the
virtual address space for the platform. (Bspec 59505)
The graphics engine mask represents the Xe2 architecture engines (Bspec
60149), but individual platforms may have a reduced set of usable
engines, as reflected by their fusing.
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The choice of Y-major tiling format (either the legacy "TileY" or the
newer "Tile4") is based on graphics IP version (12.50 and beyond have
Tile4, earlier platforms have TileY). The tracking in xe was originally
added to allow re-using display from i915. However as of i915 commit
4ebf43d048 ("drm/i915: Eliminate has_4tile feature flag"), the display
code determines TileY vs Tile4 itself, so this can be removed from xe.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230817230407.909816-10-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
