The current mailbox functions have too many parameters, making the code
difficult to maintain. So construct a new structure mbox_msg to pass the
information needed by mailbox.
Link: https://lore.kernel.org/r/20220302064830.61706-6-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The "op" field of the mailbox occupies 8 bits, so the parameter "op"
should be of type u8.
Link: https://lore.kernel.org/r/20220302064830.61706-5-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The value of the function parameter “timeout” is unique. Therefore,
it is unnecessary to specify the parameter “timeout” value each time.
So remove it.
Link: https://lore.kernel.org/r/20220302064830.61706-3-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The parameter "op_modifier" is only used for HIP06. It is useless for HIP08
and later versions. After removing HIP06, this parameter is no longer used,
so remove it.
Link: https://lore.kernel.org/r/20220302064830.61706-2-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP06 is no longer supported. In order to reduce unnecessary maintenance,
the code of HIP06 is removed.
Link: https://lore.kernel.org/r/20211220130558.61585-1-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hex printf format should be "0xff" instead of "ff".
Link: https://lore.kernel.org/r/20211119140208.40416-2-liangwenpeng@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If hns_roce_cmd_use_events() fails then it means that the poll_sem is not
obtained, but the poll_sem is released in hns_roce_cmd_use_polling(), this
will cause an unlock problem.
This is the static checker warning:
drivers/infiniband/hw/hns/hns_roce_main.c:926 hns_roce_init()
error: double unlocked '&hr_dev->cmd.poll_sem' (orig line 879)
Event mode and polling mode are mutually exclusive and resources are
separated, so there is no need to process polling mode resources in event
mode.
The initial mode of cmd is polling mode, so even if cmd fails to switch to
event mode, it is not necessary to switch to polling mode.
Fixes: a389d016c0 ("RDMA/hns: Enable all CMDQ context")
Fixes: 3d50503b3b ("RDMA/hns: Optimize cmd init and mode selection for hip08")
Link: https://lore.kernel.org/r/1627887374-20019-1-git-send-email-liangwenpeng@huawei.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use ratelimited print in mbox and cmq. And print mailbox operation if
mailbox fails because it's useful information for the user.
Link: https://lore.kernel.org/r/1617262341-37571-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix error of cmd's context number calculation algorithm to enable all of
32 cmd entries and support 32 concurrent accesses.
Link: https://lore.kernel.org/r/1617262341-37571-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'HNS_ROCE_OPC_QUERY_MB_ST' command will response the mailbox complete
status and hardware busy flag, and the complete status is only valid when
the busy flag is 0, so it's better to query these two fields at a time
rather than separately.
Link: https://lore.kernel.org/r/1616815294-13434-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Types of some fields, variables and parameters of some functions should be
unsigned.
Link: https://lore.kernel.org/r/1607650657-35992-10-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Just format the code without modifying anything, including fixing some
redundant and missing blanks and spaces and changing the variable
definition order.
Link: https://lore.kernel.org/r/1607650657-35992-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are two modes for mailbox command (cmd) queue, i.e., event mode and
poll mode. For each mode, we use corresponding semaphores to protect the
cmd queue resource competition, so called event_sem and poll_sem. During
cmd init, both semaphores are initialized and poll mode is selected.
Thus, there is no need to up poll_sema again in cmd_use_polling.
Furthermore, there is no need to down the sema of the other side while
switching mode. This patch aims to decouple the switch between event mode
and poll mode of cmd.
Link: https://lore.kernel.org/r/1567068102-56919-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Here Clean up unnecessary initial value for some variable.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch removes the hns-roce.ko for cleanup all the exported symbols in
common part.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On hi08 chip, There is a possibility of chip hanging and some errors when
sending mailbox & doorbell during reset. We can fix it by prohibiting
mailbox and doorbell during reset and reset occurred to ensure that
hardware can work normally.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch added reset process for RoCE in hip08.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Considering the compatibility of supporting hip08's eq
process and possible changes of data structure, this patch
refactors the eq code structure of hip06.
We move all the eq process code for hip06 from hns_roce_eq.c
into hns_roce_hw_v1.c, and also for hns_roce_eq.h. With
these changes, it will be convenient to add the eq support
for later hardware version.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In hip08 SoC, the hardware implementation of mailbox command
has changed with hip06 SoC. As a result, it adjusts the
architecture of the command code and implements the interfaces
of mailbox for hip08 SoC.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to support the scalability of the hardware version, the
features irrelevant to the hardware will be located in the hns-roce.ko,
and the hardware relevant operations will be located in hns_roce_hw_v1.ko
or hns_roce_hw_v2.ko based on the series chips.
The hip08 RoCE engine is a PCI device, hip06 RoCE engine is a platform
device. In order to support both platform device and PCI device, We
replace &hr_dev->pdev->dev with hr_dev->dev in hns-roce.ko as belows:
Before modification:
struct device *dev = hr_dev->dev;
After modification:
struct device *dev = &hr_dev->pdev->dev;
The related structure:
struct hns_roce_dev {
...
struct platform_device *pdev;
struct pci_dev *pci_dev;
struct device *dev;
...
}
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The hardware relevant definitions and operations are implemented
in hns_roce_hw_v* file. According to the diversity chips, the file
is named as hns_roce_hw_v1.c or hns_roce_hw_v2.c etc.
The general software process flow, common structures and allocated
algorithms are implemented in other files located in hns roce driver.
In order to support the scalability of the hardware version, the
common driver features are in the hns-roce.ko, and the hardware
relevant operations are in hns_roce_hw_v1.ko or hns_roce_hw_v2.ko
based on the series chips.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
* Replace the specification of a data structure by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
These are the various new source code files for the Hisilicon
RoCE driver for ARM architecture.
Signed-off-by: Wei Hu <xavier.huwei@huawei.com>
Signed-off-by: Nenglong Zhao <zhaonenglong@hisilicon.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>