HIP06 is no longer supported. In order to reduce unnecessary maintenance,
the code of HIP06 is removed.
Link: https://lore.kernel.org/r/20211220130558.61585-1-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid to do bitwise operations on a boolean value, add a new
register interface to avoid sparse comlaint about "dubious: x & !y" when
calling hr_reg_write(ctx, field, !!val).
Fixes: dc50477440 ("RDMA/hns: Use new interface to set MPT related fields")
Fixes: 495c24808c ("RDMA/hns: Add XRC subtype in QPC and XRC type in SRQC")
Link: https://lore.kernel.org/r/1624262443-24528-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The same name represents opposite meanings in new/old driver, it is hard
to maintain, so rename them to PI/CI.
Link: https://lore.kernel.org/r/1621482876-35780-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use hr_reg_write/read() to simplify codes about configuring function's
resource. And because the design of PF/VF fields is same, they can be
defined only once.
Link: https://lore.kernel.org/r/1617715514-29039-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace BUILD_BUG_ON_ZERO() with BUILD_BUG_ON() to avoid sparse
complaining "restricted __le32 degrades to integer".
Link: https://lore.kernel.org/r/1617354454-47840-10-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The register 0x07014 is actually the head pointer of CMDQ, and 0x07010
means tail pointer. Current definitions are confusing, so rename them and
related variables.
The next_to_use of structure hns_roce_v2_cmq_ring has the same semantics
as head, merge them into one member. The next_to_clean of structure
hns_roce_v2_cmq_ring has the same semantics as tail. After deleting
next_to_clean, tail should also be deleted.
Link: https://lore.kernel.org/r/1612688143-28226-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Types of some fields, variables and parameters of some functions should be
unsigned.
Link: https://lore.kernel.org/r/1607650657-35992-10-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stash is a mechanism that uses the core information carried by the ARM AXI
bus to access the L3 cache. It can be used to improve the performance by
increasing the hit ratio of L3 cache. CQs need to enable stash by default.
Link: https://lore.kernel.org/r/1606374251-21512-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Verbs destroy callbacks are synchronous operations and can't be delayed.
The expectation is that after driver returned from destroy function, the
memory can be freed and user won't be able to access it again.
Ditch workqueue implementation used in HNS driver.
Fixes: d838c481e0 ("IB/hns: Fix the bug when destroy qp")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: oulijun <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch updates the implementation of the mailbox command interface by
using command queue instead of operating registers. With this update, the
software can be well decoupled with the hardware.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch updates the implementation of set_mac by using
command queue instead of directly writing registers.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch updates the implementation of set_gid by using
command queue instead of directly writing registers.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hip06 and hip08 run on a little endian ARM, it needs to
revise the annotations to indicate that the HW uses little
endian data in the various DMA buffers, and flow the necessary
swaps throughout.
The imm_data use big endian mode. The cpu_to_le32/le32_to_cpu
swaps are no-op for this, which makes the only substantive
change the handling of imm_data which is now mandatory swapped.
This also keep match with the userspace hns driver and resolve
the warning by sparse.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds eq support for hip08. The eq table can
be multi-hop addressed.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In hip08, the user access region(UAR) pfn is calculated
from pci device memory resource.
This patch mainly sets mac and gid table by configuring
the relevant registers and updates the uar pfn for hip08 SoC.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In hip08 SoC, the hardware implementation of mailbox command
has changed with hip06 SoC. As a result, it adjusts the
architecture of the command code and implements the interfaces
of mailbox for hip08 SoC.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The command queue is the configuration queue. The software
configures hardware by filling the commands into command
queues. It includes command send queue and receive queue.
In hip08 RoCE engine, It supports to configure and query
registers by command queue.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the resources of cq are freed while executing the user case, hardware
can not been notified in hip06 SoC. Then hardware will hold on when it
writes the cq buffer which has been released.
In order to slove this problem, RoCE driver checks the CQE counter, and
ensure that the outstanding CQE have been written. Then the cq buffer
can be released.
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If send queue is still working when qp is in reset state by modify qp
in destroy qp function, hardware will hold on and don't work in hip06
SoC. In current codes, RoCE driver check hardware pointer of sending and
hardware pointer of processing to ensure that hardware has processed all
the dbs of this qp. But while the environment of wire becomes not good,
The checking time maybe too long.
In order to solve this problem, RoCE driver created a workqueue at probe
function. If there is a timeout when checking the status of qp, driver
initialize work entry and push it into the workqueue, Work function will
finish checking and release the related resources later.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Dongdong Huang(Donald) <hdd.huang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch added the code for refreshing CQ CI using TPTR in hip06
SoC.
We will send a doorbell to hardware for refreshing CQ CI when user
succeed to poll a cqe. But it will be failed if the doorbell has
been blocked. So hardware will read a special buffer called TPTR
to get the lastest CI value when the cq is almost full.
This patch support the special CI buffer as follows:
a) Alloc the memory for TPTR in the hns_roce_tptr_init function and
free it in hns_roce_tptr_free function, these two functions will
be called in probe function and in the remove function.
b) Add the code for computing offset(every cq need 2 bytes) and
write the dma addr to every cq context to notice hardware in the
function named hns_roce_v1_write_cqc.
c) Add code for mapping TPTR buffer to user space in function named
hns_roce_mmap. The mapping distinguish TPTR and UAR of user mode
by vm_pgoff(0: UAR, 1: TPTR, others:invaild) in hip06.
d) Alloc the code for refreshing CQ CI using TPTR in the function
named hns_roce_v1_poll_cq.
e) Add some variable definitions to the related structure.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Dongdong Huang(Donald) <hdd.huang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
These are the various new source code files for the Hisilicon
RoCE driver for ARM architecture.
Signed-off-by: Wei Hu <xavier.huwei@huawei.com>
Signed-off-by: Nenglong Zhao <zhaonenglong@hisilicon.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
