In some situations a sent packet may get queued in the NIC longer than
than timeout of a ULP. Currently if this happens the ULP may try to reset
the link by destroying the qp and setting up an alternate connection but
will fail because the rxe driver is waiting for the packet to finish
getting sent and be returned to the skb destructor function where the qp
reference holding things up will be dropped. This patch modifies the way
that the qp is passed to the destructor to pass the qp index and not a qp
pointer. Then the destructor will attempt to lookup the qp from its index
and if it fails exit early. This requires taking a reference on the struct
sock rather than the qp allowing the qp to be destroyed while the sk is
still around waiting for the packet to finish.
Link: https://lore.kernel.org/r/20240329145513.35381-15-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the rxe_driver detects packet drops by ip_local_out() which
occur before the packet is sent on the wire and attempts to resend
them. This is redundant with the usual retry mechanism which covers
packets that get dropped in transit to or from the remote node.
The way this is implemented is not robust since it sets need_req_skb and
waits for the number of local skbs outstanding for this qp to drop below a
low water mark. This is racy since the skb may be sent to the destructor
before the requester can set the need_req_skb flag. This will cause a
deadlock in the send path for that qp.
This patch removes this mechanism since the normal retry path will correct
the error and resend the packet and it makes no difference if the packet
is dropped locally or later.
Link: https://lore.kernel.org/r/20240329145513.35381-14-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rxe send path currently counts the number of skbs outstanding between
the rxe driver and the ethernet driver to prevent too many packets to
accumulate waiting to send. This patch makes the local loopback path
behave the same way. The loopback path forwards the packets to the receive
path which will eventually call kfree_skb on all packets and drop the qp
references. This makes the loopback path more useful for software testing.
Link: https://lore.kernel.org/r/20240329145513.35381-13-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_send() a ref is taken on the qp to keep it alive until the
kfree_skb() has a chance to call the skb destructor rxe_skb_tx_dtor()
which drops the reference. If the packet has an incorrect protocol the
error path just calls kfree_skb() which will call the destructor which
will drop the ref. Currently the driver also calls rxe_put() which is
incorrect. Additionally since the packets sent to rxe_send() are under the
control of the driver and it only ever produces IPV4 or IPV6 packets the
simplest fix is to remove all the code in this block.
Link: https://lore.kernel.org/r/20240329145513.35381-12-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Fixes: 9eb7f8e44d ("IB/rxe: Move refcounting earlier in rxe_send()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that rxe_completer() is always called serially after rxe_requester()
there is no reason to schedule rxe_completer() from rxe_requester().
Link: https://lore.kernel.org/r/20240329145513.35381-9-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the rxe driver has three work queue tasks per qp. These are the
req.task, comp.task and resp.task which call rxe_requester(),
rxe_completer() and rxe_responder() respectively directly or on work
queues. Each of these subroutines checks to see if there is work to be
performed on the send queue or on the response packet queue or the request
packet queue and will run until there is no work remaining or yield the
cpu and reschedule itself until there is no work remaining.
This commit combines the req.task and comp.task into a single send.task
and renames the resp.task to the recv.task. The combined send.task calls
rxe_requester() and rxe_completer() serially and continues until all work
on both the send queue and the response packet queue are done.
In various benchmarks the performance is either improved or left the
same. At high scale there is a significant reduction in the load on the
cpu.
This is the first step in combining these two tasks. Once they are
serialized cross rescheduling of req.task and comp.task can be more
efficiently handled by just letting the send.task continue to run. This
will be done in the next several patches.
Link: https://lore.kernel.org/r/20240329145513.35381-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_net.c a received packet, from udp or loopback, is passed to
rxe_rcv() in rxe_recv.c as a udp packet. I.e. skb->data is pointing at the
udp header. But rxe_rcv() makes length checks to verify the packet is long
enough to hold the roce headers as if it were a roce
packet. I.e. skb->data pointing at the bth header. A runt packet would
appear to have 8 more bytes than it actually does which may lead to
incorrect behavior.
This patch calls skb_pull() to adjust the skb to point at the bth header
before calling rxe_rcv() which fixes this error.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230517172242.1806340-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the rxe driver makes little effort to make the changes to qp
state (which includes qp->attr.qp_state, qp->attr.sq_draining and
qp->valid) atomic between different client threads and IO threads. In
particular a common template is for an RDMA application to call
ib_modify_qp() to move a qp to ERR state and then wait until all the
packet and work queues have drained before calling ib_destroy_qp(). None
of these state changes are protected by locks to assure that the changes
are executed atomically and that memory barriers are included. This has
been observed to lead to incorrect behavior around qp cleanup.
This patch continues the work of the previous patches in this series and
adds locking code around qp state changes and lookups.
Link: https://lore.kernel.org/r/20230405042611.6467-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rxe driver has four different QP state variables,
qp->attr.qp_state,
qp->req.state,
qp->comp.state, and
qp->resp.state.
All of these basically carry the same information.
This patch replaces uses of qp->req.state by qp->attr.qp_state and enum
rxe_qp_state. This is the third of three patches which will remove all
but the qp->attr.qp_state variable. This will bring the driver closer to
the IBA description.
Link: https://lore.kernel.org/r/20230405042611.6467-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rxe driver has four different QP state variables,
qp->attr.qp_state,
qp->req.state,
qp->comp.state, and
qp->resp.state.
All of these basically carry the same information.
This patch replaces uses of qp->resp.state by qp->attr.qp_state. This is
the first of three patches which will remove all but the qp->attr.qp_state
variable. This will bring the driver closer to the IBA description.
Link: https://lore.kernel.org/r/20230405042611.6467-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace the name rxe_dbg with rxe_dbg_dev which better matches
the remaining rxe_dbg_xxx macros for debug messages with a
rxe device parameter. Reuse the name rxe_dbg for debug messages
which do not have a rxe device parameter.
Link: https://lore.kernel.org/r/20230303221623.8053-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace (some) calls to pr_xxx() in rxe_net.c with rxe_dbg_xxx().
Calls with a rxe device not yet in scope are left as is.
Link: https://lore.kernel.org/r/20221103171013.20659-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split rxe_run_task(task, sched) into rxe_run_task(task) and
rxe_sched_task(task).
Link: https://lore.kernel.org/r/20221021200118.2163-5-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Incoming packets to rxe are passed from UDP layer using an encapsulation
socket. If there are any clients reachable to a node, they can invoke the
encapsulation handler arbitrarily by sending malicious or irrelevant
packets. This can potentially cause a message overflow and a subsequent
slowdown on the node.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220929080023.304242-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Rename rxe_add_ref() to rxe_get() and rxe_drop_ref() to rxe_put().
Significantly improves readability for new readers.
Link: https://lore.kernel.org/r/20220304000808.225811-10-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The commit referenced below can take a reference to the AH which is never
dropped. This only happens in the UD request path. This patch optionally
passes that AH back to the caller so that it can hold the reference while
the AV is being accessed and then drop it. Code to do this is added to
rxe_req.c. The AV is also passed to rxe_prepare in rxe_net.c as an
optimization.
Fixes: e2fe06c908 ("RDMA/rxe: Lookup kernel AH from ah index in UD WQEs")
Link: https://lore.kernel.org/r/20220304000808.225811-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move rxe_mcast_add and rxe_mcast_delete from rxe_net.c to rxe_mcast.c,
make static and remove declarations from rxe_loc.h.
Link: https://lore.kernel.org/r/20220127213755.31697-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The member variable xmit_errors can be replaced with
rxe_counter_inc(rxe, RXE_CNT_SEND_ERR)
Link: https://lore.kernel.org/r/20211216054842.1099428-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Return value directly instead of taking this in another redundant
variable.
Link: https://lore.kernel.org/20211215075258.442930-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Reviewed-by: Devesh Sharma <Devesh.s.sharma@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
From Maor Gottlieb
====================
Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer to store the number of DMA mapped
sges, the orig_nents is the number of CPU sges.
Since the sg append logic doesn't always create a SGL with exactly
orig_nents entries store a total_nents as well to allow the table to be
properly free'd and reorganize the freeing logic to share across all the
use cases.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* 'sg_nents':
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
An earlier patch removed setting of tot_len in IPv4 headers because it was
also set in ip_local_out. However, this change resulted in an incorrect
ICRC being computed because the tot_len field is not masked out. This
patch restores that line. This fixes the bug reported by Zhu Yanjun. This
bug affects anyone using rxe which is currently broken.
Fixes: 230bb836ee ("RDMA/rxe: Fix redundant call to ip_send_check")
Link: https://lore.kernel.org/r/20210729220039.18549-3-rpearsonhpe@gmail.com
Reported-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-and-tested-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Isolate ICRC generation into a single subroutine named rxe_generate_icrc()
in rxe_icrc.c. Remove scattered crc generation code from elsewhere.
Link: https://lore.kernel.org/r/20210707040040.15434-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixup rxe_send() and rxe_loopback() in rxe_net.c to have the same calling
sequence. This patch makes them static and have the same parameter list
and return value.
Link: https://lore.kernel.org/r/20210707040040.15434-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_xmit_packet() was an overlong inline subroutine. This patch moves it
into rxe_net.c as an ordinary subroutine.
Link: https://lore.kernel.org/r/20210707040040.15434-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_init_packet() in rxe_net.c calls skb_put_zero() to reserve space for
the payload and zero it out. All these bytes are then re-written with RoCE
headers and payload. Remove this useless extra copy.
Fixes: ecb238f6a7 ("IB/cxgb4: use skb_put_zero()/__skb_put_zero")
Link: https://lore.kernel.org/r/20210618045742.204195-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For IPV4 packets sent on the wire the rxe driver calls ip_local_out()
which immediately calls __ip_local_out() which sets iph->tot_len and calls
ip_send_check(). This code is duplicated in prepare4(). On the loopback
path the IP header checksum and tot_len fields are not used so they do not
need to be set.
Remove this redundant code.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210618045742.204195-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To avoid the following failure when trying to load the rdma_rxe module
while IPv6 is disabled, add a check for EAFNOSUPPORT and ignore the
failure, also delete the needless debug print from rxe_setup_udp_tunnel().
$ modprobe rdma_rxe
modprobe: ERROR: could not insert 'rdma_rxe': Operation not permitted
Fixes: dfdd6158ca ("IB/rxe: Fix kernel panic in udp_setup_tunnel")
Link: https://lore.kernel.org/r/20210603090112.36341-1-kamalheib1@gmail.com
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the noted patch below extending the reference taken by
rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it
was not matched by a reference in the loopback path resulting in
underflows.
Fixes: 899aba891c ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAppPgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGeXYH/imZPBd4A1jIMehN
5HV2A53Z+MXmmaMuGj9X1KV6vsf55/xB+IhOoFdtRAIsO8c2yYSCO8i4+4R0XfYA
+/YFJeq672rojQnmh6XbpR8dugaAV7CUHy6n7KDsyvtT6EOCpwFSwkOb4X3tBRX6
TlYgm2d/xgV/wRHSgLVugK0MdFCLMAnyb7mkPfar9QrMgG1BiDKLq07xmwnS23On
TkqpJ9yZ/rJpUrrUqQYPShSO/FmA+fSfWs0CDv7EIrJ40LUScD6PZxSHWTIHtjLk
E4jFda6wuqLRVWsBwaBzUIdD0zk7X5quHRzEpbC5ga16SK6yrWvE5YJJXCguIEuZ
f3FMRYs=
=CAjn
-----END PGP SIGNATURE-----
Merge tag 'v5.11' into rdma.git for-next
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_udp_encap_recv() drops the reference to rxe->ib_dev taken by
rxe_get_dev_from_net() which should be held until each received skb is
freed. This patch moves the calls to ib_device_put() to each place a
received skb is freed. It also takes references to the ib_device for each
cloned skb created to process received multicast packets.
Fixes: 4c173f596b ("RDMA/rxe: Use ib_device_get_by_netdev() instead of open coding")
Link: https://lore.kernel.org/r/20210128233318.2591-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_net.c sends packets at the IP layer with skb->data pointing at the IP
header but receives packets from a UDP tunnel with skb->data pointing at
the UDP header. On the loopback path this was not correctly accounted
for. This patch corrects for this by using sbk_pull() to strip the IP
header from the skb on received packets.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210128182301.16859-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This reverts commit b2d2440430.
It's true that creating rxe on top of 802.1q interfaces doesn't work.
Thus, commit fd49ddaf7e ("RDMA/rxe: prevent rxe creation on top of vlan
interface") was absolutely correct.
But b2d2440430 was incorrect assuming that with this change, RDMA and
VLAN don't work togehter at all. It just has to be set up
differently. Rather than creating rxe on top of the VLAN interface, rxe
must be created on top of the physical interface. RDMA then works just
fine through VLAN interfaces on top of that physical interface, via the
"upper device" logic.
This is hard to see in the rxe logic because it never talks about vlan,
but instead rxe carefully selects upper vlan netdevices when working with
packets which in turn imply certain vlan tagging. This is all done
correctly and interacts with the gid table with VLAN support the same as
real HW does.
b2d2440430 broke this setup deliberately and should thus be
reverted. Also, b2d2440430 removed rxe_dma_device(), so adapt the revert
to discard that hunk.
Fixes: b2d2440430 ("RDMA/rxe: Remove VLAN code leftovers from RXE")
Link: https://lore.kernel.org/r/20210120161913.7347-1-mwilck@suse.com
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This moves siw and rxe to be virtual devices in the device tree:
lrwxrwxrwx 1 root root 0 Nov 6 13:55 /sys/class/infiniband/rxe0 -> ../../devices/virtual/infiniband/rxe0/
Previously they were trying to parent themselves to the physical device of
their attached netdev, which doesn't make alot of sense.
My hope is this will solve some weird syzkaller hits related to sysfs as
it could be possible that the parent of a netdev is another netdev, eg
under bonding or some other syzkaller found netdev configuration.
Nesting a ib_device under anything but a physical device is going to cause
inconsistencies in sysfs during destructions.
Link: https://lore.kernel.org/r/0-v1-dcbfc68c4b4a+d6-virtual_dev_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the commit fd49ddaf7e ("RDMA/rxe: prevent rxe creation on top of
vlan interface") does not permit rxe on top of vlan device, all the stuff
related with vlan should be removed.
Fixes: fd49ddaf7e ("RDMA/rxe: prevent rxe creation on top of vlan interface")
Link: https://lore.kernel.org/r/1604326422-18625-1-git-send-email-yanjunz@nvidia.com
Signed-off-by: Zhu Yanjun <yanjunz@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The patch referenced below has a typo that results in using the wrong L2
header size for outbound traffic. (V4 <-> V6).
It also breaks kernel-side RC traffic because they use AVs that use
RDMA_NETWORK_XXX enums instead of RXE_NETWORK_TYPE_XXX enums. Fix this by
transcoding between these enum types.
Fixes: e0d696d201 ("RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI")
Link: https://lore.kernel.org/r/20201016211343.22906-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
RXE was wrongly using an internal kernel enum as part of its uAPI, split
this out into a dedicated uAPI enum just for RXE. It only uses the IPv4
and IPv6 values.
This was exposed by changing the internal kernel enum definition which
broke RXE.
Fixes: 1c15b4f2a4 ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of returning IB_LINK_LAYER_ETHERNET from rxe_link_layer, return it
directly from get_link_layer callback and remove rxe_link_layer().
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-5-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ipv6_stub uses the ip6_dst_lookup function to allow other modules to
perform IPv6 lookups. However, this function skips the XFRM layer
entirely.
All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the
ip_route_output_key and ip_route_output helpers) for their IPv4 lookups,
which calls xfrm_lookup_route(). This patch fixes this inconsistent
behavior by switching the stub to ip6_dst_lookup_flow, which also calls
xfrm_lookup_route().
This requires some changes in all the callers, as these two functions
take different arguments and have different return types.
Fixes: 5f81bd2e5d ("ipv6: export a stub for IPv6 symbols used by vxlan")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use rdma_read_gid_attr_ndev_rcu() to access netdevice attached to GID
entry under rcu lock.
This ensures that while working on the netdevice of the GID, it doesn't
get freed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Always consider the skb reserve space based on netdevice of the GID
attribute, regardless of vlan or non vlan netdevice.
Fixes: 43c9fc509f ("rdma_rxe: make rxe work over 802.1q VLAN devices")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the function rxe_init_packet, based on av->network_type, skb->protocol
is set to ipv4 or ipv6. The functions rxe_prepare and rxe_send are called
after the functin rxe_init_packet. So in these functions,
av->network_type can be replaced with skb->protocol.
The functions are in the xmit fast path. So with skb->protocol, the
performance will be better.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support for the RDMA_NLDEV_CMD_NEWLINK/DELLINK messages which allow
dynamically adding new RXE links. Deprecate the old module options for
now.
Cc: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since rxe allows unregistration from other threads the rxe pointer can
become invalid any moment after ib_register_driver returns. This could
cause a user triggered use after free.
Add another driver callback to be called right after the device becomes
registered to complete any device setup required post-registration. This
callback has enough core locking to prevent the device from becoming
unregistered.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rxe has an open coded version of this that is not as safe as the core
version. This lets us eliminate the internal device list entirely from
rxe.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rxe does not have correct locking for its registration/unregistration
paths, use the core code to handle it instead. In this mode
ib_unregister_device will also do the dealloc, so rxe is required to do
clean up from a callback.
The core code ensures that unregistration is done only once, and generally
takes care of locking and concurrency problems for rxe.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
