Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-16 (ice)
This series contains updates to ice driver only.
Michal fixes a couple of issues with TC filter parsing; always add match
for src_vsi and remove flag check that could prevent addition of valid
filters.
Marcin adds additional checks for unsupported flower filters.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
====================
Link: https://lore.kernel.org/r/20240416202409.2008383-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert xrs700x to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. We need to provide stubs for
the mac_link_down() and mac_config() methods which are mandatory.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rwfu8-007531-TG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rzn1_a5psw to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. We need to provide a stub for
the mac_config() method which is mandatory.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rwfuJ-00753D-6d@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert lan9303 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. We need to provide stubs for
the mac_link_down() and mac_config() methods which are mandatory.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rwfuE-007537-1u@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert bcm_sf2 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rwfu3-00752s-On@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to BIOS configuration of Realtek ACPI DSM function 7,
RTW89_ACPI_DSM_FUNC_6GHZ_SP_SUP, we handle the regd policy of 6 GHz SP.
If BIOS indicates to override driver settings, we only allow the countries,
which are enabled by BIOS, to use 6 GHz SP power. Other countries will be
applied to select default power when recalculating 6 GHz regulatory power
selection.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240412115729.8316-9-pkshih@realtek.com
Realtek ACPI DSM func 7, RTW89_ACPI_DSM_FUNC_6GHZ_SP_SUP, accepts a format
via ACPI buffer as below.
| index | description |
--------------------------------------------
| [0-3] | signature |
| [4] | revision |
| [5] | override driver settings, or not |
| [6] | configuration if override |
| [7] | reserved |
where field of [6] is a bitmap by country,
and for now, only define BIT(0) is for US.
Through this function with overriding, BIOS can indicate to allow/block
6 GHz SP power by country.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240412115729.8316-8-pkshih@realtek.com
Originally, we have an ACPI function to determine whether to enable UNII-4.
Since IC (Industry Canada) has allowed UNII-4, the ACPI result is extended
to be two bits as below.
* BIT(0): determine if rtw89_regd::FCC enable UNII-4
* BIT(1): determine if rtw89_regd::IC enable UNII-4
Besides, to take old platforms into account, we enable UNII-4 on IC if and
only if BIOS configuration enable it.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240412115729.8316-7-pkshih@realtek.com
We allow 6 GHz on target regd if and only if
1. it is a specific country, i.e. not any world-wide cases
2. its 6 GHz is not blocked
So, for world-wide cases, their 6 GHz will be blocked now.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240412115729.8316-6-pkshih@realtek.com
Deconfigure fields for 6GHz SP. Don't use these set of values until
getting certification of 6GHz SP regulation. Without configuring
these fields, driver takes world-wide values when 6GHz SP cases.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240412115729.8316-5-pkshih@realtek.com
Deconfigure fields for 6GHz SP. Don't use these set of values until
getting certification of 6GHz SP regulation. Without configuring
these fields, driver takes world-wide values when 6GHz SP cases.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240412115729.8316-4-pkshih@realtek.com
We have some policy via BIOS to block uses of 6 GHz. In this case, 6 GHz
sband will be NULL even if it is WiFi 7 chip. So, add NULL handling here
to avoid crash.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240412115729.8316-3-pkshih@realtek.com
TX power in MAC domain is signed 7 bits. (unit: based on txpwr_factor_mac)
The valid range should be [-64, 63].
While the original wrong bounds might not really be encountered, still make
them correct.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240412115729.8316-2-pkshih@realtek.com
The DMA channel of firmware command doesn't use TX WD (WiFi descriptor), so
don't need to consider number of TX WD as factor of TX resource. Otherwise,
during pause state (a transient state to switch to/from low power mode)
firmware commands could be dropped and driver throws warnings suddenly:
rtw89_8852ce 0000:04:00.0: no tx fwcmd resource
rtw89_8852ce 0000:04:00.0: failed to send h2c
The case we met is that driver sends RSSI strength of firmware command at
RX path that could be running concurrently with switching low power mode.
The missing of this firmware command doesn't affect user experiences,
because the RSSI strength will be updated again after a while.
The DMA descriptors of normal packets has three layers like:
+-------+
| TX BD | (*n elements)
+-------+
|
| +-------+
+-> | TX WD | (*m elements)
+-------+
|
| +--------+
+-> | SKB |
+--------+
And, firmware command queue (TXCH 12) is a special queue that has only
two layers:
+-------+
| TX BD | (*n elements)
+-------+
|
| +------------------+
+-> | firmware command |
+------------------+
Fixes: 4a29213cd7 ("wifi: rtw89: pci: correct TX resource checking in low power mode")
Cc: stable@vger.kernel.org
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240410011316.9906-1-pkshih@realtek.com
ndo_get_phys_port_name is never actually used, as in switchdev
devlink is always being created.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Dariusz Aftanski <dariusz.aftanski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In cases when VF sends malformed packets that are classified as malicious,
it can cause Tx queue to freeze as a result of Malicious Driver Detection
event. Such malformed packets can appear as a result of a faulty userspace
app running on VF. This frozen queue can be stuck for several minutes being
unusable.
User might prefer to immediately bring the VF back to operational state
after such event, which can be done by automatically resetting the VF which
caused MDD. This is already implemented for Rx events (mdd-auto-reset-vf
flag private flag needs to be set).
Extend the VF auto reset to also cover Tx MDD events. When any MDD event
occurs on VF (Tx or Rx) and the mdd-auto-reset-vf private flag is set,
perform a graceful VF reset to quickly bring it back to operational state.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Liang-Min Wang <liang-min.wang@intel.com>
Signed-off-by: Liang-Min Wang <liang-min.wang@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The mediatek-ge PHY driver already disables EEE advertisement on the switch
PHYs but my testing [1] shows that it is somehow enabled afterwards.
Disabling EEE advertisement before the PHY driver initialises keeps it off.
Therefore, remove disabling EEE advertisement here as it's useless.
Link: https://lore.kernel.org/netdev/d286ea27-e911-4dcb-9037-b75f22b437b8@arinc9.com/ [1]
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.
Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.
Fixes: 110c18bfed ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.
This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.
Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:
tc qdisc add dev swp0 clsact
tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0
As a side note, this configuration provides the hairpinning feature for a
single port.
Fixes: 37feab6076 ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is supposed to return a uid on success, and an errno in
failure.
But it currently returns the return value of the specific cmd version
handler, which in turn returns 0 on success and errno otherwise.
This means that on success, iwl_mvm_build_scan_cmd will return 0
regardless if the actual uid.
Fix this by returning the uid if the handler succeeded.
Fixes: 687db6ff5b ("iwlwifi: scan: make new scan req versioning flow")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240415114847.5e2d602b3190.I4c4931021be74a67a869384c8f8ee7463e0c7857@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a PASN station is added, and an old PASN station already exists
for the same mac address, remove the old station before adding the
new one. Keeping the old station caueses old security context to
be used in measurements.
Fixes: 0739a7d70e ("iwlwifi: mvm: initiator: add option for adding a PASN responder")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.ef3544a416f2.I4e8c7c8ca22737f4f908ae5cd4fc0b920c703dd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In commit 18ff0bcda6 ("ethtool: add interface to interact with Ethernet
Power Equipment"), the 'pse_control_config' structure was introduced,
housing a single member labeled 'admin_cotrol' responsible for maintaining
the operational state of the PoDL PSE functions.
A noticeable typographical error exists in the naming of this field
('cotrol' should be corrected to 'control'), which this commit aims to
rectify.
Furthermore, with upcoming extensions of this structure to encompass PoE
functionalities, the field is being renamed to 'podl_admin_state' to
distinctly indicate that this state is tailored specifically for PoDL."
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-3-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The print function dev_err() is redundant because
platform_get_irq_byname() already prints an error.
./drivers/net/ipa/ipa_interrupt.c:300:2-9: line 300 is redundant because platform_get_irq() already prints an error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8756
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240415031456.10805-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.
net_ratelimit mechanism can be used to limit the dumping rate.
PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980"
#0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
[exception RIP: io_serial_in+20]
RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002
RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000
RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0
RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f
R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020
R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
#12 [ffffa65531497b68] printk at ffffffff89318306
#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
#18 [ffffa65531497f10] kthread at ffffffff892d2e72
#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f
Fixes: ef3db4a595 ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for SPI driver. Having another MODULE_ALIAS causes
the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154929.127045-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.
Example:
devlink dev eswitch set $PF1_PCI mode switchdev
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
tc qdisc add dev $VF1_PR ingress
ethtool -K $PF1 hw-tc-offload on
tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop
Fixes: 9e300987d4 ("ice: VXLAN and Geneve TC support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.
It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.
Fixes: 9a225f81f5 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In case of traffic going from the VF (so ingress for port representor)
source VSI should be consider during packet classification. It is
needed for hardware to not match packets from different ports with
filters added on other port.
It is only for "from VF" traffic, because other traffic direction
doesn't have source VSI.
Set correct ::src_vsi in rule_info to pass it to the hardware filter.
For example this rule should drop only ipv4 packets from eth10, not from
the others VF PRs. It is needed to check source VSI in this case.
$tc filter add dev eth10 ingress protocol ip flower skip_sw action drop
Fixes: 0d08a441fb ("ice: ndo_setup_tc implementation for PF")
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
wilc1000 driver currently uses SRCU API to manage vif list. There is no
real reason to use SRCU API here, and it makes things slightly more
complicated (we need to handle a SRCU index as well as a srcu_struct) than
classical RCU.
Switch SRCU APIs to RCU APIs.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240410-wilc_srcu_to_rcu-v1-2-a9ff5b10feaa@bootlin.com
In order to prepare wilc1000 driver switch from SRCU to RCU, make sure that
allocators are provided with the GFP_ATOMIC flag when called in a critical
read section.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240410-wilc_srcu_to_rcu-v1-1-a9ff5b10feaa@bootlin.com
Commit c3718936ec ("ipv6: anycast: complete RCU handling of struct
ifacaddr6") converted struct inet6_dev::ac_list to use RCU but missed that
ath11k also accesses this list. Now sparse warns:
drivers/net/wireless/ath/ath11k/mac.c:9145:21: warning: incorrect type in assignment (different address spaces)
drivers/net/wireless/ath/ath11k/mac.c:9145:21: expected struct ifacaddr6 *ifaca6
drivers/net/wireless/ath/ath11k/mac.c:9145:21: got struct ifacaddr6 [noderef] __rcu *ac_list
drivers/net/wireless/ath/ath11k/mac.c:9145:53: warning: incorrect type in assignment (different address spaces)
drivers/net/wireless/ath/ath11k/mac.c:9145:53: expected struct ifacaddr6 *ifaca6
drivers/net/wireless/ath/ath11k/mac.c:9145:53: got struct ifacaddr6 [noderef] __rcu *aca_next
Fix it by using rtnl_dereference(). Also add a note that read_lock_bh() calls
rcu_read_lock() which I was not aware of.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Fixes: c3718936ec ("ipv6: anycast: complete RCU handling of struct ifacaddr6")
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240411165516.4070649-2-kvalo@kernel.org
Here is the list of the MAC capabilities specific to the particular DW MAC
IP-cores currently supported by the driver:
DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100
DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000
Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000
DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD
if there is more than 1 active Tx/Rx queues:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD
DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD
DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD |
MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD
As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE.
Meanwhile what is currently implemented defines 10/100/1000 link speeds
for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC
and DW XLGMAC devices.
Seeing the flow-control is implemented as a callback for each MAC IP-core
(see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(),
etc) and since the MAC-specific setup() method is supposed to be called
for each available DW MAC-based device, the capabilities initialization
can be freely moved to these setup() functions, thus correctly setting up
the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A
new stmmac_link::caps field was specifically introduced for that so to
have all link-specific info preserved in a single structure.
Note the suggested change fixes three earlier commits at a time. The
commit 5b0d7d7da6 ("net: stmmac: Add the missing speeds that XGMAC
supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW
XGMAC IP-core even though it doesn't support them. The commit df7699c70c
("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000
capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit
8a880936e9 ("net: stmmac: Add XLGMII support") incorrectly permitted the
10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core.
Fixes: 5b0d7d7da6 ("net: stmmac: Add the missing speeds that XGMAC supports")
Fixes: df7699c70c ("net: stmmac: Do not cut down 1G modes")
Fixes: 8a880936e9 ("net: stmmac: Add XLGMII support")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's possible to have the maximum link speed being artificially limited on
the platform-specific basis. It's done either by setting up the
plat_stmmacenet_data::max_speed field or by specifying the "max-speed"
DT-property. In such cases it's required that any specific
MAC-capabilities re-initializations would take the limit into account. In
particular the link speed capabilities may change during the number of
active Tx/Rx queues re-initialization. But the currently implemented
procedure doesn't take the speed limit into account.
Fix that by calling phylink_limit_mac_speed() in the
stmmac_reinit_queues() method if the speed limitation was required in the
same way as it's done in the stmmac_phy_setup() function.
Fixes: 95201f36f3 ("net: stmmac: update MAC capabilities when tx queues are updated")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
enabled:
DW GMAC v3.7+ with AV feature,
DW QoS Eth v4.x/v5.x,
DW XGMAC/XLGMAC
Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
support the half-duplex link mode in case if more than one queues enabled:
"In multiple queue/channel configurations, for half-duplex operation,
enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
full-duplex operation, any queue/channel can be enabled."
The rest of the IP-cores don't have such constraint. Thus in order to have
the constraint applied for the DW QoS Eth MACs only, let's move the it'
implementation to the respective MAC-capabilities getter and make sure the
getter is called in the queues re-init procedure.
Fixes: b6cfffa7ad ("stmmac: fix DMA channel hang in half-duplex mode")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
This series contains updates to ice driver only.
Lukasz removes unnecessary argument from ice_fdir_comp_rules().
Jakub adds support for ethtool 'ether' flow-type rules.
Jake moves setting of VF MSI-X value to initialization function and adds
tracking of VF relative MSI-X index.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: store VF relative MSI-X index in q_vector->vf_reg_idx
ice: set vf->num_msix in ice_initialize_vf_entry()
ice: Implement 'flow-type ether' rules
ice: Remove unnecessary argument from ice_fdir_comp_rules()
====================
Link: https://lore.kernel.org/r/20240412210534.916756-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert mt753x to provide its own phylink MAC operations, thus avoiding
the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/E1rvIco-006bQu-Fq@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert lantiq_gswip to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. For lantiq_gswip, it means
we end up with a common instance of phylink MAC operations that are
shared between the different variants, rather than having duplicated
initialisers in dsa_switch_ops.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rvIcj-006bQo-B3@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert qca8k to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIce-006bQi-58@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert ar9331 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIcZ-006bQc-0W@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert sja1105 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIcT-006bQW-S3@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Every time EHT Operation element changed, mac80211 will parse it and
extract the valid puncturing bitmap according to the bandwidth.
Current driver only update puncturing bitmap to firmware as vdev
parameter. Which can only meet the needs of AP. But STA will also use
it as peer parameter. If only update as vdev parameter, might cause
firmware crash. QCN9274 is the same.
So update bandwidth and puncturing bitmap as peer parameters once they
changed for STA. Then send them to the firmware by WMI event.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240408083047.22548-1-quic_kangyang@quicinc.com
Currently, in the rx error data path, mac id is extracted from the
last 64bits of MSDU end description tag for each entry received in
the WBM error ring. Then, each entry will be updated into the MSDU
list for further processing. The extracted mac id is valid when a
single MSDU is not fragmented and received in the WBM error ring.
In scenarios where the size of a single MSDU received exceeds the
descriptor buffer size, resulting in fragmented or spillover MSDU
entries into the WBM error ring. In this case, the extracted mac id
from each spillover entry is invalid except the last spillover entry
of the MSDU. This invalid mac id leads to packet rejection.
To address this issue, check if the MSDU continuation flag is set,
then extract the valid mac id from the last spillover entry.
Propagate the valid mac id to all the spillover entries of the single
MSDU in the temporary MSDU list(scatter_msdu_list). Then, update this
into the MSDU list (msdu_list) for further processing.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Nithyanantham Paramasivam <quic_nithp@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240404141538.1277258-1-quic_nithp@quicinc.com
Add very basic page pool use so that we can exercise
the netlink uAPI in a selftest.
Page pool gets created on open, destroyed on close.
But we control allocating of a single page thru debugfs.
This page may survive past the page pool itself so that
we can test orphaned page pools.
Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the con_id instead of property so that callers won't repeat
the GPIO suffixes to try.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This patch adds XDP (eXpress Data Path) support to TI AM65 CPSW
Ethernet driver. The following features are implemented:
- NETDEV_XDP_ACT_BASIC (XDP_PASS, XDP_TX, XDP_DROP, XDP_ABORTED)
- NETDEV_XDP_ACT_REDIRECT (XDP_REDIRECT)
- NETDEV_XDP_ACT_NDO_XMIT (ndo_xdp_xmit callback)
The page pool memory model is used to get better performance.
Below are benchmark results obtained for the receiver with iperf3 default
parameters:
- Without page pool: 495 Mbits/sec
- With page pool: 605 Mbits/sec (actually 610 Mbits/sec, with a 5 Mbits/sec
loss due to extra processing in the hot path to handle XDP).
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a member and the related accessors which can be
used to store descriptor specific additional information. This member
can store, for instance, an ID to differentiate a skb TX buffer type
from a xdpf TX buffer type.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds accessors for desc_size and cpumem members. They may be
used, for instance, to compute a descriptor index.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
