Completion queues are used for completions of RDQ or SDQ. Each
completion queue is used for one DQ. The first CQs are used for SDQs and
the rest are used for RDQs.
Currently, for each CQE (completion queue element), we check 'sr' value
(send/receive) to know if it is completion of RDQ or SDQ. Actually, we
do not really have to check it, as according to the queue number we know
if it handles completions of Rx or Tx.
Break the tasklet into two - one for Rx (RDQ) and one for Tx (SDQ). Then,
setup the appropriate tasklet for each queue as part of queue
initialization. Use 'sr' value for unlikely case that we get completion
with type that we do not expect. Call WARN_ON_ONCE() only after checking
the value, to avoid calling this method for each completion.
A next patch set will use NAPI to handle events, then we will have a
separate poll method for Rx and Tx. This change is a preparation for
NAPI usage.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/50fbc366f8de54cb5dc72a7c4f394333ef71f1d0.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function will be broken into several functions later. As preparation,
reorder variables to reverse xmas tree.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/7170a8f4429ecb5a539b0374c621697778ff8363.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch changed the code to do not handle command interface
from event queue. With this change the wait queue is not used anymore.
Remove it and 'wait_done' variable.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f3af6a5a9dabd97d2920cefe475c6aa57767f504.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The device supports two event queues. EQ0 is used for command interface
completion events. EQ1 is used for completion events of RDQ or SDQ.
Currently, for each EQE (event queue element), we check the queue number
and handle accordingly. More than that, for each interrupt we schedule
tasklets for both EQs. This is really ineffective, especially because of
the fact that EQ0 is used only as part of driver init/fini, when EMADs are
not available. There is no point to schedule the tasklet for it and check
each EQE.
A previous patch changed the code to poll command interface for each use of
it. It means that now there is no real reason to use EQ0, as we poll the
command interface.
Initialize only one event queue and use it as EQ1 (this is determined by
queue number). Then, for each interrupt we can schedule the tasklet only
for one queue and we do not have to check the queue number. This
simplifies the code and should improve performance. Note that polling
command interface is ok as we use it only as part of driver init/fini.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/23d764f5c032e4c363b98590b746a4b32d2bf900.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we use MLXSW_PCI_EQS_COUNT event queues. A next patch will
change the driver to initialize only EQ1, as EQ0 is not required anymore
when we poll command interface.
Rename the macro to MLXSW_PCI_EQS_MAX as later we will not initialize
the maximum supported EQs, this value represents the maximum and a new
macro will be added to represent the actual used queues.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/b08df430b62f23ca1aa3aaa257896d2d95aa7691.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Command interface is used for configuring and querying FW when EMADs are
not available. During the time that the driver sets up the asynchronous
queues, it polls the command interface for getting completions. Then,
there is a short period when asynchronous queues work, but EMADs are not
available (marked in the code as nopoll = true). During this time, we
send commands via command interface, but we do not poll it, as we can get
an interrupt for the completion. Completions of command interface are
received from HW in EQ0 (event queue 0).
The usage of EQ0 instead of polling is done only 4 times during
initialization and one time during tear down, but it makes an overhead
during lifetime of the driver. For each interrupt, we have to check if
we get events in EQ0 or EQ1 and handle them. This is really ineffective,
especially because of the fact that EQ0 is used only as part of driver
init/fini.
Instead, we can poll command interface for each call of cmd_exec(). It
means that when we send a command via command interface (as EMADs are
not available), we will poll it, regardless of availability of the
asynchronous queues. This will allow us to configure later only EQ1 and
simplify the flow.
Remove 'nopoll' indication and change mlxsw_pci_cmd_exec() to poll till
answer/timeout regardless of queues' state. For now, completions are
handled also by EQ0, but it will be removed in next patch. Additional
cleanups will be added in next patches.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/e674c70380ceda953e0e45a77334c5d22e69938f.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function will be used later only for EQ1. As preparation, reorder
variables to reverse xmas tree and return earlier when it is possible, to
simplify the code.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/2412d6c135b2a6aedb4484f5d8baab3aecd7b9ae.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The structure 'mlxsw_pci_queue' stores several counters which were consumed
via debugfs. Since commit 9a32562bec ("mlxsw: Remove debugfs interface"),
these counters are not used. Remove them. This makes the 'union u' and
'struct eq' redundant. Maintain 'struct cq' as it will be extended later.
Replace increasing 'q->u.eq.ev_other_count' with WARN_ON_ONCE(), as it is
used in an unreasonable case of receiving event in EQ which is not EQ0 or
EQ1. When the queues are initialized, we check number of event queues and
fail with the print "Unsupported number of queues" in case that the driver
tries to initialize more than two queues.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/ee9e658800aa0390e08342100bc27daff4c176c0.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, as part of mlxsw_pci_cq_tasklet(), we check if any item
was handled, and only in such case we arm doorbell. This is unlikely case,
as we schedule tasklet only for CQs that we get an event for them, which
means that they contain completions to handle. Remove this check, which
is supposed to be true always, and even if it is false, it is not a mistake
to ring the doorbell. We can warn on such case, but it is not really worth
to add a check which will be run for each CQ handling when we do not expect
to reach it and it does not point to logic error that should be handled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f8efa481bfe7bebb9f93bb803f44ab7da77f53e6.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the structure 'mlxsw_pci_queue_ops' holds a pointer to the
callback function of tasklet. This is used only for EQ and CQ. mlxsw
driver will use NAPI in a following patch set, so CQ will not use tasklet
anymore. As preparation, remove this pointer from the shared operation
structure and setup the tasklet as part of queue initialization.
For now, setup tasklet for EQ and CQ. Later, CQ code will be changed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/a326cae5fc1ad085a1a063c004983de6fe389414.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move mlxsw_pci_cq_{init, fini}() after mlxsw_pci_cq_tasklet() as a next
patch will setup the tasklet as part of initialization.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/25196cb5baf5acf6ec1e956203790e018ba8e306.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move mlxsw_pci_eq_{init, fini}() after mlxsw_pci_eq_tasklet() as a next
patch will setup the tasklet as part of initialization.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/7ae120a02e1c490084daae7e684a0d40b7cce4e7.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware will return 0 on query BOOT/INIT PAGES for non-page supplier
functions (external host PF/VF/SF), so no page is needed to be
allocated for them.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240402133043.56322-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Page events are not issued by device on the function if
page_request_disable is set, so no need to create pages EQ.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240402133043.56322-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace matching on TCP and UDP protocols with new l4_type field which
is parsed by steering for ttc_table. It is enabled by the
outer_l4_type or inner_l4_type bits in nic_rx or port_sel flow table
capabilities and used only if pcc_ifa2 bit in HCA capabilities is set.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240402133043.56322-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for 800Gbps speed, link modes of 100Gbps per lane.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240402133043.56322-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the kernel, the preferred types are uX.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Starting from commit
eb9b9fdcaf ("net/mlx5e: Introduce extended version for mlx5e_xmit_data")
sinfo is no longer passed as an argument to
mlx5e_xmit_xdp_frame(), the comment is inconsistent.
check_result must be zero when the packet is fragmented.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resetting stats just before some test/debug case allows us to eliminate
out the impact of previous commands. Useful in particular for the
average latency calculation.
The average_write() callback was unreachable, as "average" is a
read-only file. Extend, rename, and use it for a newly exposed
write-only "reset" file.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fill_strings() callbacks were changed to accept a **data pointer,
and not rely on propagating the index value.
Make a similar change to fill_stats() callbacks to keep the API
consistent.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ethtool_sprintf/puts() helper functions which handle the common
pattern of printing a string into the ethtool strings interface and
incrementing the string pointer by ETH_GSTRING_LEN.
Change the fill_strings callback to accept a **data pointer, and remove
the index and return value.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ethtool_sprintf/puts() helper functions which handle the common
pattern of printing a string into the ethtool strings interface and
incrementing the string pointer by ETH_GSTRING_LEN.
The int return value in mlx5e_self_test_fill_strings() is not removed as
it is still used to return the number of selftests.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ethtool_sprintf/puts() helper functions which handle the common
pattern of printing a string into the ethtool strings interface and
incrementing the string pointer by ETH_GSTRING_LEN.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi as we didn't consider it
as major enough to justify merging wireless tree to wireless-next. But
Stephen has an example merge resolution which should help with fixing
the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYNIqIRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt8jAf9H+o91boD34/qVdI5LWEcFhVKEkHpNtwm
Y1sTKNBEtN1Gs2zcljjO6PqN9N4v2+lA42KSpzP5M42FfpI2aATI2v8jYsKTXOl2
YVwF+8pDiAsi0YtQTxIthygjzTpsePCfj8z0xJaKGm195T+fMm9UebYETrfxxOp/
z5StsJIPI0twgSLKKUWvLpX4ESt0l0HLJY1ok99sk4Cj36EKn6b9LbBinDKr6GcQ
mGNtPyq0j4l0kS5qae9BbXZUohO54o8wiFnApdwGfA7S/kLY7eUtwZy7T050b62P
zbNafwZbIjrH7dNcGfe6Fdr7PjQYFeI5Nh7dXxqM2LJOQsYXU/tcWQ==
=WrPE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit implements VCT in 88E308X/88E609X Family.
It require two workarounds with some magic configuration.
Regular use require only one register configuration. But Open Circuit
require second workaround.
It cause implementation two phases for fault length measuring.
Fast Ethernet PHY have implemented very simple version of VCT. It's
complitley different than vct5 or vct7.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240402201123.2961909-3-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements only basic support.
It covers PHY used in multiple IC:
PHY: 88E3082, 88E3083
Switch: 88E6096, 88E6097
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240402201123.2961909-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be
multiple of 64. So a packet slightly bigger than mtu+14, say 1536,
can be received and cause skb_over_panic.
Sample dmesg:
[ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL>
[ 5325.243689] ------------[ cut here ]------------
[ 5325.245748] kernel BUG at net/core/skbuff.c:192!
[ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60
[ 5325.302941] Call Trace:
[ 5325.304389] <IRQ>
[ 5325.315794] ? skb_panic+0x4f/0x60
[ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30
[ 5325.319490] ? skb_panic+0x4f/0x60
[ 5325.321161] skb_put+0x4e/0x50
[ 5325.322670] mana_poll+0x6fa/0xb50 [mana]
[ 5325.324578] __napi_poll+0x33/0x1e0
[ 5325.326328] net_rx_action+0x12e/0x280
As discussed internally, this alignment is not necessary. To fix
this bug, remove it from the code. So oversized packets will be
marked as CQE_RX_TRUNCATED by NIC, and dropped.
Cc: stable@vger.kernel.org
Fixes: 2fbbd712ba ("net: mana: Enable RX path to handle various MTU sizes")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1712087316-20886-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In "struct muram_info", the 'size' field is unused.
In "struct memac_cfg", the 'fixed_link' field is unused.
Remove them.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/425222d4f6c584e8316ccb7b2ef415a85c96e455.1712084103.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are 2 issues with the blamed commit.
1. When the phy is initialized, it would enable the disabled of UDPv4
checksums. The UDPv6 checksum is already enabled by default. So when
1-step is configured then it would clear these flags.
2. After the 1-step is configured, then if 2-step is configured then the
1-step would be still configured because it is not clearing the flag.
So the sync frames will still have origin timestamps set.
Fix this by reading first the value of the register and then
just change bit 12 as this one determines if the timestamp needs to
be inserted in the frame, without changing any other bits.
Fixes: ece1950283 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://lore.kernel.org/r/20240402071634.2483524-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver should ensure that same priority is not mapped to multiple
rx queues. From DesignWare Cores Ethernet Quality-of-Service
Databook, section 17.1.29 MAC_RxQ_Ctrl2:
"[...]The software must ensure that the content of this field is
mutually exclusive to the PSRQ fields for other queues, that is,
the same priority is not mapped to multiple Rx queues[...]"
Previously rx_queue_priority() function was:
- clearing all priorities from a queue
- adding new priorities to that queue
After this patch it will:
- first assign new priorities to a queue
- then remove those priorities from all other queues
- keep other priorities previously assigned to that queue
Fixes: a8f5102af2 ("net: stmmac: TX and RX queue priority configuration")
Fixes: 2142754f8b ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Piotr Wejman <piotrwejman90@gmail.com>
Link: https://lore.kernel.org/r/20240401192239.33942-1-piotrwejman90@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting mac_managed_pm during interface up is too late.
In situations where the link is not brought up yet and the system suspends
the regular PHY power management will run. Since the FEC ETHEREN control
bit is cleared (automatically) on suspend the controller is off in resume.
When the regular PHY power management resume path runs in this context it
will write to the MII_DATA register but nothing will be transmitted on the
MDIO bus.
This can be observed by the following log:
fec 5b040000.ethernet eth0: MDIO read timeout
Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0xc8 returns -110
Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: failed to resume: error -110
The data written will however remain in the MII_DATA register.
When the link later is set to administrative up it will trigger a call to
fec_restart() which will restore the MII_SPEED register. This triggers the
quirk explained in f166f890c8 ("net: ethernet: fec: Replace interrupt
driven MDIO with polled IO") causing an extra MII_EVENT.
This extra event desynchronizes all the MDIO register reads, causing them
to complete too early. Leading all reads to read as 0 because
fec_enet_mdio_wait() returns too early.
When a Microchip LAN8700R PHY is connected to the FEC, the 0 reads causes
the PHY to be initialized incorrectly and the PHY will not transmit any
ethernet signal in this state. It cannot be brought out of this state
without a power cycle of the PHY.
Fixes: 557d5dc83f ("net: fec: use mac-managed PHY PM")
Closes: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
[jernberg: commit message]
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://lore.kernel.org/r/20240328155909.59613-2-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the very rare case where a packet type is unknown to the driver,
idpf_rx_process_skb_fields would return early without calling
eth_type_trans to set the skb protocol / the network layer handler.
This is especially problematic if tcpdump is running when such a
packet is received, i.e. it would cause a kernel panic.
Instead, call eth_type_trans for every single packet, even when
the packet type is unknown.
Fixes: 3a8845af66 ("idpf: add RX splitq napi poll support")
Reported-by: Balazs Nemeth <bnemeth@redhat.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Salvatore Daniele <sdaniele@redhat.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_port_vlan_on/off() was introduced in commit 2946204b3f ("ice:
implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns
ena_rx_filtering to inner_vlan_ops in DVM mode.
This causes an error when rx_filtering cannot be enabled in legacy mode.
Reproducer:
echo 1 > /sys/class/net/$PF/device/sriov_numvfs
ip link set $PF vf 0 spoofchk off trust on vlan 3
dmesg:
ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95
Fixes: 2946204b3f ("ice: implement bridge port vlan")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Automatically cleaned up pointers need to be initialized before exiting
their scope. In this case, they need to be initialized to NULL before
any return statement.
Fixes: 90f821d72e ("ice: avoid unnecessary devm_ usage")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Allow the user to change ring size via ethtool if
supported by the device. The driver relies on the
ring size ranges queried from device to validate
ring sizes requested by the user.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to read ring size change capability and the
min and max descriptor counts from the device and store it
in the driver. Also accommodate a special case where the
device does not provide minimum ring size depending on the
version of the device. In that case, rely on default values
for the minimums.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fulfill the requirement that for GQI, the number of pages per
RX QPL is equal to the ring size. Set this value to be equal to
ring size. Because of this change, the rx_data_slot_cnt and
rx_pages_per_qpl fields stored in the priv structure are not
needed, so remove their usage. And for DQO, the number of pages
per RX QPL is more than ring size to account for out-of-order
completions. So set it to two times of rx ring size.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the DQO queue format, the gve driver stores two ring sizes
for both TX and RX - one for completion queue ring and one for
data buffer ring. This is supposed to enable asymmetric sizes
for these two rings but that is not supported. Make both fields
reference the same single variable.
This change renders reading supported TX completion ring size
and RX buffer ring size for DQO from the device useless, so change
those fields to reserved and remove related code.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Combine the gve_set_desc_cnt and gve_set_desc_cnt_dqo into
one function which sets the counts after checking the queue
format. Both the functions in the previous code and the new
combined function never return an error so make the new
function void and remove the goto on error.
Also rename the new function to gve_set_default_desc_cnt to
be clearer about its intention.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the RBUF logic is not reset when the kernel starts then there
may be some data left over from any network boot loader. If the
64-byte packet headers are enabled then this can be fatal.
Extend bcmgenet_dma_disable to do perform the reset, but not when
called from bcmgenet_resume in order to preserve a wake packet.
N.B. This different handling of resume is just based on a hunch -
why else wouldn't one reset the RBUF as well as the TBUF? If this
isn't the case then it's easy to change the patch to make the RBUF
reset unconditional.
See: https://github.com/raspberrypi/linux/issues/3850
See: https://github.com/raspberrypi/firmware/issues/1882
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Maarten Vanraes <maarten@rmail.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reset CGX/RPM MAC HW statistics at the time of driver probe()
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rvu_map_cgx_lmac_pf() the 'iter', which is used as an array index, can reach
value (up to 14) that exceed the size (MAX_LMAC_COUNT = 8) of the array.
Fix this bug by adding 'iter' value check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 91c6945ea1 ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mesh point was added during development, but not remove at first
submission, so it should not work properly. Remove it to reflect correct
supported features.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240329114403.5539-1-pkshih@realtek.com
For adaption EQ circuit, this HW design and affected by EIEOS (Electrical
Idle Exit Order Set) amplitude from platform and process from IC, so
disable EQ to improve that.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240329015251.22762-5-pkshih@realtek.com
Declare beacon filter and connection monitor for 8922A. This offloads
connection monitor mechanism to firmware, which is required for future
multi-link scenarios. Currently firmware only supports non-MLO connections.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240328052656.18823-4-pkshih@realtek.com
8922a FW supports RNR parsing, provide template probe requests and
let FW do the replacement for SSID/BSSID/short SSIDs.
Don't declare WIPHY_FLAG_SPLIT_SCAN_6GHZ so proper IEs such as
6 GHz capabilities can be passed down within the same scan request.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240328052656.18823-3-pkshih@realtek.com
