1. Prefer kzalloc() over kcalloc()
See memory-allocation.rst which says: "to be on the safe side it's
best to use routines that set memory to zero, like kzalloc()"
2. Drop dev_err() for u_boot_env_add_cells() fail
It can fail only on -ENOMEM. We don't want to print error then.
3. Add extra "crc32_addr" variable
It makes code reading header's crc32 easier to understand / review.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-5-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use nvmem_dev_size() and nvmem_device_read() to make this driver less
mtd dependent.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-4-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230823132744.350618-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
U-Boot environment variables are stored in ASCII format so "ethaddr"
requires parsing into binary to make it work with Ethernet interfaces.
This includes support for indexes to support #nvmem-cell-cells = <1>.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-36-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Broadcom uses U-Boot for a lot of their bcmbca familiy chipsets. They
decided to store U-Boot environment data inside U-Boot partition and to
use a custom header (with "uEnv" magic and env data length).
Add support for Broadcom's specific binding and their custom format.
Ref: 6b0584c19d ("dt-bindings: nvmem: u-boot,env: add Broadcom's variant binding")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Western Digital MyBook Live (PowerPC 464/APM82181)
has a set of redundant u-boot-env. Loading up the driver
the following error:
| u_boot_env: Invalid calculated CRC32: 0x4f8f2c86 (expected: 0x98b14514)
| u_boot_env: probe of partition@1e000 failed with error -22
Looking up the userspace libubootenv utilities source [0],
it looks like the "mark" or "flag" is not part of the
crc32 sum... which is unfortunate :(
|static int libuboot_load(struct uboot_ctx *ctx)
|{
|[...]
| if (ctx->redundant) {
| [...]
| offsetdata = offsetof(struct uboot_env_redund, data);
| [...] //-----^^
| }
| usable_envsize = ctx->size - offsetdata;
| buf[0] = malloc(bufsize);
|[...]
| for (i = 0; i < copies; i++) {
| data = (uint8_t *)(buf[i] + offsetdata);
| uint32_t crc;
|
| ret = devread(ctx, i, buf[i]);
| [...]
| crc = *(uint32_t *)(buf[i] + offsetcrc);
| dev->crc = crc32(0, (uint8_t *)data, usable_envsize);
|
[0] https://github.com/sbabic/libubootenv/blob/master/src/uboot_env.c#L951
Fixes: d5542923f2 ("nvmem: add driver handling U-Boot environment variables")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://lore.kernel.org/r/70a16eae113e08db2390b76e174f4837caa135c3.1667580636.git.chunkeey@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
U-Boot stores its setup as environment variables. It's a list of
key-value pairs stored on flash device with a custom header.
This commit adds an NVMEM driver that:
1. Provides NVMEM access to environment vars binary data
2. Extracts variables as NVMEM cells
Current Linux's NVMEM sysfs API allows reading whole NVMEM data block.
It can be used by user-space tools for reading U-Boot env vars block
without the hassle of finding its location. Parsing will still need to
be re-done there.
Kernel-parsed NVMEM cells can be read however by Linux drivers. This may
be useful for Ethernet drivers for reading device MAC address which is
often stored as U-Boot env variable.
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
