Some MeeGoPad top-set boxes have an ANX7428 Type-C Switch for USB3.1 Gen 1
and DisplayPort over Type-C alternate mode support.
The ANX7428 has a microcontroller which takes care of the PD negotiation
and automatically sets the builtin Crosspoint Switch to send the right
signal to the 4 highspeed pairs of the Type-C connector. It also takes
care of HPD and AUX channel routing for DP alternate mode.
IOW the ANX7428 operates fully autonomous and to the x5-Z8350 SoC
things look like there simple is a USB-3 Type-A connector and a
separate DisplayPort connector. Except that the BIOS does not
power on the ANX7428 at boot (meh).
Add a driver to power on the ANX7428. This driver is added under
drivers/platform/x86 rather than under drivers/usb/typec for 2 reasons:
1. This driver is specifically written to work with how the ANX7428 is
described in the ACPI tables of the MeeGoPad x86 (Cherry Trail) devices.
2. This driver only powers on the ANX7428 and does not do anything wrt
its Type-C functionality. It should be possible to tell the controller
which data- and/or power-role to negotiate and to swap the role(s) after
negotiation but the MeeGoPad top-set boxes always draw their power from
a separate power-connector and they only support USB host-mode. So this
functionality is unnecessary and due to lack of documentation this is
tricky to support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240514180343.70795-1-hdegoede@redhat.com
Add a new driver for the custom fast charging protocol found on Lenovo Yoga
Tablet 2 1380F / 1380L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240422131649.46002-1-hdegoede@redhat.com
Add a new driver for the MSI WMI Platform interface. The underlying
ACPI WMI interface supports many features, but so far only reading
of fan speed sensors is implemented.
The driver was reverse-engineered based on a user request to the
lm-sensors project, see the github issue for details.
The ACPI WMI interface used by this driver seems to use the same
embedded controller interface as the msi-ec driver, but supports
automatic discovery of supported machines without relying on a
DMI whitelist.
The driver was tested by the user who created the github issue.
Closes: https://github.com/lm-sensors/lm-sensors/issues/475
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240421191145.3189-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new driver Kconfig entry has a typo that causes a link failure
when CONFIG_INPUT_SPARSEKMAP is disabled:
x86_64-linux-ld: drivers/platform/x86/quickstart.o: in function `quickstart_notify':
quickstart.c:(.text+0x96): undefined reference to `sparse_keymap_report_event'
x86_64-linux-ld: drivers/platform/x86/quickstart.o: in function `quickstart_probe':
quickstart.c:(.text+0x1da): undefined reference to `sparse_keymap_setup'
Select this symbol instead of the incorrect INPUT_SPARSE_KEYMAP.
Fixes: afd66f2a739e ("platform/x86: Add ACPI quickstart button (PNP0C32) driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240404123435.2684819-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This drivers supports the ACPI quickstart button device, which
is used to send manufacturer-specific events to userspace.
Since the meaning of those events is not standardized, userspace
has to use for example hwdb to decode them.
The driver itself is based on an earlier proposal, but contains
some improvements and uses the device wakeup API instead of a
custom sysfs file.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240131111641.4418-2-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add lenovo WMI camera button driver to support camera button.
The Camera button is a GPIO device. This driver receives ACPI notifications
when the camera button is switched on/off. This driver is used in
Lenovo A70, it is a Computer integrated machine.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240327082737.336992-1-aichao@kylinos.cn
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This patch adds battery charge control support on Fujitsu notebooks
via the S006 method of the FUJ02E3 ACPI device. With this method it's
possible to set charge_control_end_threshold between 50 and 100%.
Tested on Lifebook E5411 and Lifebook U728. Sadly I can't test this
patch on a dual battery one, but I didn't find any clue about
independent battery charge control on dual battery Fujitsu notebooks
either. And by that I mean checking the DSDT table of various Lifebook
notebooks and reverse engineering FUJ02E3.dll.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20240215203012.228758-2-szfabian@bluemarch.art
[ij: coding style cleanups.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since 64f67b5240 ("leds: trigger: audio: Add an activate callback to
ensure the initial brightness is set") the audio triggers have an
activate callback which sets the LED brightness as soon as the
(default) trigger is bound to the LED device. So we can remove the
call to ledtrig_audio_get.
Positive side effect: There's no code dependency to ledtrig-audio any
longer, what allows to remove some Kconfig dependencies.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/daef7331-dcb4-4b3a-802e-656629486b4c@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- asus-wmi: Solve i8042 filter resource handling, input, and
suspend issues
- wmi: Skip zero instance WMI blocks to avoid issues with
some laptops
- mlxbf-bootctl: Differentiate dev/production keys
- platform/surface: Correct serdev related return value to avoid
leaking errno into userspace
- Error checking fixes
The following is an automated shortlog grouped by driver:
asus-wmi:
- Change q500a_i8042_filter() into a generic i8042-filter
- disable USB0 hub on ROG Ally before suspend
- Filter Volume key presses if also reported via atkbd
- Move i8042 filter install to shared asus-wmi code
mellanox:
- Add null pointer checks for devm_kasprintf()
- Check devm_hwmon_device_register_with_groups() return value
mlxbf-bootctl:
- correctly identify secure boot with development keys
surface: aggregator:
- fix recv_buf() return value
wmi:
- Skip blocks with zero instances
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZXC60QAKCRBZrE9hU+XO
McbwAPwIlGYIdYzUXGVGCrCBq7wtBR8ADfFqIa42hUlkDyZ4tAEA8LgrZutAFwhq
35kVk6FSwrUGuIhX5TkxTxnp814nzwE=
=iiB1
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-3' into pdx86/for-next
Back merge pdx86 fixes into pdx86/for-next for further WMI work
depending on some of the fixes.
platform-drivers-x86 for v6.7-3
Highlights:
- asus-wmi: Solve i8042 filter resource handling, input, and
suspend issues
- wmi: Skip zero instance WMI blocks to avoid issues with
some laptops
- mlxbf-bootctl: Differentiate dev/production keys
- platform/surface: Correct serdev related return value to avoid
leaking errno into userspace
- Error checking fixes
The following is an automated shortlog grouped by driver:
asus-wmi:
- Change q500a_i8042_filter() into a generic i8042-filter
- disable USB0 hub on ROG Ally before suspend
- Filter Volume key presses if also reported via atkbd
- Move i8042 filter install to shared asus-wmi code
mellanox:
- Add null pointer checks for devm_kasprintf()
- Check devm_hwmon_device_register_with_groups() return value
mlxbf-bootctl:
- correctly identify secure boot with development keys
surface: aggregator:
- fix recv_buf() return value
wmi:
- Skip blocks with zero instances
Add Silicom platform (silicom-platform) Linux driver for Swisscom
Business Box (Swisscom BB) as well as Cordoba family products.
This platform driver provides support for various functions via
the Linux LED framework, GPIO framework, Hardware Monitoring (HWMON)
and device attributes.
Signed-off-by: Henry Shi <henryshi2018@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231124200334.5318-1-henryshi2018@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Support CPU and GPU fan speed monitoring through WMI for Predator
PHN16-71.
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-3-onenowy@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
"select ACPI_VIDEO" cause recursive dependency when "depends on HWMON"
is added:
drivers/hwmon/Kconfig:6:error: recursive dependency detected!
drivers/hwmon/Kconfig:6: symbol HWMON is selected by EEEPC_LAPTOP
drivers/platform/x86/Kconfig:326: symbol EEEPC_LAPTOP depends on ACPI_VIDEO
drivers/acpi/Kconfig:208: symbol ACPI_VIDEO is selected by ACER_WMI
drivers/platform/x86/Kconfig:173: symbol ACER_WMI depends on HWMON
Replace the select with depends on to avoid this problem when the next
patch in this series adds "depends on HWMON".
There is a stub defined for the used acpi_video_get_backlight_type()
function when ACPI_VIDEO is not set, so use:
depends on ACPI_VIDEO || ACPI_VIDEO = n
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-4-onenowy@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Acer Predator PHN16-71 has the mode key that is used to rotate thermal
modes or toggle turbo mode with predator sense app (ver. 4) on windows.
This patch includes platform profile and the mode key support for the
device and also includes a small fix for "WMI_gaming_execute_u64"
function.
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-2-onenowy@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
asus-nb-wmi calls i8042_install_filter() in some cases, but it never
calls i8042_remove_filter(). This means that a dangling pointer to
the filter function is left after rmmod leading to crashes.
Fix this by moving the i8042-filter installation to the shared
asus-wmi code and also remove it from the shared code on driver unbind.
Fixes: b5643539b8 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A")
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231120154235.610808-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for Inspur platforms to used the platform profile feature.
This will allow users to determine and control the platform modes
between low-power, balanced and performance modes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020024007.1677962-1-aichao@kylinos.cn
[ij: Removed kerneldoc markers from non-kerneldoc comments.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add dependency on PCI to avoid 'mlx-platform' compilation error in case
CONFIG_PCI is not set.
Failed on i386:
CONFIG_ACPI=y
CONFIG_ISA=y
Error In function 'mlxplat_pci_fpga_device_init':
implicit declaration of function 'pci_request_region':
6204 | err = pci_request_region(pci_dev, 0, res_name);
| ^~~~~~~~~~~~~~~~~~
| pci_request_regions
Fixes: 1316e0af2d ("platform: mellanox: mlx-platform: Introduce ACPI init flow")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230829133748.58208-2-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The P2SB is used purely as a library and all users must select it with
depends on PCI
select P2SB if X86
statement. Without this the combination of different configuration
options may lead to build failures.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230822142514.2140897-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Introduce support for ACPI initialization flow - add ACPI match hook.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-12-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ib-pdx86-simatic-v6.6-2: v6.5-rc1 + ib-pdx86-simatic-v6.6 +
more recent pdx86 simatic-ipc patches for merging into
the LED subsystem for v6.6.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmTHq4YUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xtQQgAnbfDXeO7iYlcP5PMloes/XbtQQeC
E5QaJdg4Yt9Zg8BFY8VtzV1o461l26cHEAftXxR5H68+pAdFLlZCyMBHDltE9rtg
2IxvGm6Kp2unZzNhZyS7hI2eoA6S3d7HFcskwtsJuC6kTVhTbZamuh8CVxMV6Y9P
HhUoAuU6HTv+rFV74GfP+lyPh2o4ceAKFArMICenkArEY8Usy8sFFs+iEFHrPatz
210jKMyvkhw4pFz+M6IT4KTfz7SEKPnQEcURQuoNgNc7s4VPtgyEgyQmBZeIZxc/
FHww+qjInKO1Wp2Y8umUzoC6FMFsKtu+rC5g0dz148cD1KaEeQBBvhbYRA==
=DvwQ
-----END PGP SIGNATURE-----
Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans
Immutable branch between pdx86 simatic branch and LED due for the v6.6 merge window
ib-pdx86-simatic-v6.6-2: v6.5-rc1 + ib-pdx86-simatic-v6.6 +
more recent pdx86 simatic-ipc patches for merging into
the LED subsystem for v6.6.
With more files around move everything to a subdirectory. Users will
only see the several options once they enable the main one.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230719153518.13073-4-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a driver for Schweitzer Engineering Laboratories SEL-3350 computers
front LEDs and power supplies. LED and power supply status is provided
by the Intel SoC GPIO.
Signed-off-by: Robert Joslyn <robert.joslyn@redrectangle.org>
Link: https://lore.kernel.org/r/20230713035714.807819-1-robert.joslyn@redrectangle.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We do not use PCI any longer since
commit 446f0cf9e0 ("platform/x86: simatic-ipc: drop custom P2SB bar code")'
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230706161040.21152-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Siemens Simatic Industrial PCs can monitor the voltage of the CMOS
battery with two bits that indicate low or empty state. This can be GPIO
or PortIO based.
Here we model that as a hwmon voltage. The core driver does the PortIO
and provides boilerplate for the GPIO versions. Which are split out to
model runtime dependencies while allowing fine-grained kernel
configuration.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230706154831.19100-3-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The added platform_driver support fails to link when I2C core support is
not rechable:
x86_64-linux-ld: drivers/platform/x86/lenovo-yogabook.o: in function `yogabook_pdev_probe':
lenovo-yogabook.c:(.text+0x5a5): undefined reference to `i2c_bus_type'
Add a Kconfig dependency to enforce a working configuration.
Fixes: 6df1523fa0 ("platform/x86: lenovo-yogabook: Add platform driver support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230519082606.375471-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The lenovo-yogabook-wmi.c code now consists of both a platform and a WMI
driver and it does not use WMI at all when used on the Android model.
Rename the module from lenovo-yogabook-wmi to lenovo-yogabook to
reflect this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230430165807.472798-20-hdegoede@redhat.com
Add a place for device-specific documentation of WMI drivers.
The first entry is documentation for the wmi-bmof driver, with
additional documentation being expected to follow.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230424222939.208137-5-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This WMI driver for the tablet mode control switch for Lenovo Yoga
notebooks was originally written by Gergo Koteles. The mode is mapped to
a SW_TABLET_MODE switch capable input device.
Andrew followed the suggestions that were posted in reply to Gergo's RFC
patch, and on the v1 & v2 versions of this patch to follow-up and get it
merged.
Changes from Gergo's RFC:
- Refactored obtaining a reference to the EC ACPI device needed for the
quirk implementation as suggested by Hans de Goede
- Applied small fixes and switched to always registering handles with
the driver for automatic cleanup as suggested by Barnabás Pőcze.
- Merged the lenovo_ymc_trigger_ec function with the
ideapad_trigger_ymc_next_read function since it was no longer
external.
- Added the word "Tablet" to the driver description to hopefully make
it more clear.
- Fixed the LENOVO_YMC_QUERY_METHOD ID and the name string for the EC
APCI device trigged for the quirk
- Triggered the input event on probe so that the initial tablet mode
state when the driver is loaded is reported to userspace as suggested
by Armin Wolf.
- Restricted the permissions of the ec_trigger parameter as suggested
by Armin Wolf. Also updated the description.
We have tested this on the Yoga 7 14AIL7 for the non-quirk path and on
the Yoga 7 14ARB7 which has the firmware bug that requires triggering
the embedded controller to send the mode change events. This workaround
is also used by the Windows drivers.
According to reports at https://github.com/lukas-w/yoga-usage-mode,
which uses the same WMI devices, the following models should also work:
Yoga C940, Ideapad flex 14API, Yoga 9 14IAP7, Yoga 7 14ARB7, etc.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Co-developed-by: Andrew Kallmeyer <kallmeyeras@gmail.com>
Signed-off-by: Andrew Kallmeyer <kallmeyeras@gmail.com>
Link: https://lore.kernel.org/r/20221004214332.35934-1-soyer@irl.hu/
Link: https://lore.kernel.org/r/20230310041726.217447-1-kallmeyeras@gmail.com/
Link: https://lore.kernel.org/r/20230323025200.5462-1-kallmeyeras@gmail.com/
Tested-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230329014559.44494-3-kallmeyeras@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a new driver to allow various MSI laptops' functionalities to be
controlled from userspace. This includes such features as power
profiles (aka shift modes), fan speed, charge thresholds, LEDs, etc.
This driver contains EC memory configurations for different firmware
versions and exports battery charge thresholds to userspace (note,
that start and end thresholds control the same EC parameter
and are always 10% apart).
Link: https://github.com/BeardOverflow/msi-ec/
Link: https://github.com/BeardOverflow/msi-ec/pull/13
Cc: Aakash Singh <mail@singhaakash.dev>
Cc: Jose Angel Pastrana <japp0005@red.ujaen.es>
Signed-off-by: Nikita Kravets <teackot@gmail.com>
Link: https://lore.kernel.org/r/20230320225509.3559-1-teackot@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmQTGxYUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xbqQgAo3KZGfLwjadkr5R6WJoh953Eulv7
MO7mSm3SYAaevNKJ3fsL5mqEPXr8Vh+S9feP+Z0Ngc4u/g232Gt8Lu9aaq7OAuUY
VeixLct8gX5l4z8azTd7au+k8hXLhatjxK77sDtrRns9StlmMVcYNDCH64b7JMie
S5kMIzY1e26M8nH2lVzYGmjrw0vbAYDRXljuZLPTWNHOsPoV56zDW9cXsBFzeNvS
m8oDI6B1rVJ8I1nC2lGJCydGdZewy5tA+RsMQ+DsLWxS+N/nsEJiJai5tLdD6d5Z
1l/aBfPDZhUAezIavgQUfU7pxAqIfBIDFDqbPBoCO31tX2QbSKE6g/tUKQ==
=XQIg
-----END PGP SIGNATURE-----
Merge tag 'ib-pdx86-backlight-6.4' into review-hans
Immutable branch between pdx86 and backlight due for the v6.4 merge window
On some MacBooks both the apple_bl and the apple-gmux backlight drivers
may be able to export a /sys/class/backlight device.
To avoid having 2 backlight devices for one LCD panel until now
the apple-gmux driver has been calling apple_bl_unregister() to move
the apple_bl backlight device out of the way when it loads.
Similar problems exist on other x86 laptops and all backlight drivers
which may be used on x86 laptops have moved to using
acpi_video_get_backlight_type() to determine whether they should load
or not.
Switch apple_bl to this model too, so that it is consistent with all
the other x86 backlight drivers.
Besides code-simplification and consistency this has 2 other benefits:
1) It removes a race during boot where userspace will briefly see
an apple_bl backlight and then have it disappear again, leading to e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
2) This allows user to switch between the drivers by passing
acpi_backlight=apple_gmux or acpi_backlight=vendor on the kernel
commandline.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230307120540.389920-1-hdegoede@redhat.com
The Peaq C1010 tablet has a special "Dolby" button. This button has
a WMI interface, but this is broken in several ways:
1. It only supports polling
2. The value read on polling goes from 0 -> 1 for one poll on both edges
of the button, with no way to tell which edge causes the poll to
return 1.
3. It uses a non unique GUID (it uses the Microsoft docs WMI example GUID).
There currently is a WMI driver for this, but it uses several kludges
to work around these issues and is not entirely reliable due to 2.
Replace the unreliable WMI driver by using the x86-android-tablets code
to instantiate a gpio_keys device for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-11-hdegoede@redhat.com
Move the x86-android-tablets code into its own subdir, this is
a preparation patch for splitting the somewhat large file into
multiple smaller files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-3-hdegoede@redhat.com
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: ef0f62264b ("platform/x86: mlx-platform: Add physical bus number auto detection")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-7-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The purpose of this patch is to provide a central location where all
HP related drivers are found. HP drivers will recide under
drivers/platform/x86/hp directory.
Introduce changes to Kconfig file to list all HP driver under "HP X86
Platform Specific Device Drivers" menu option. Additional changes
include update MAINTAINERS file to indicate hp related drivers new
path.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20221020201033.12790-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit adds the ACPI battery hook which in turns adds the sysfs
entries.
Because the Toshiba laptops only support two modes (eco or normal), which
in testing correspond to 80% and 100% we simply round to the nearest
possible level when set.
It is possible that Toshiba laptops other than the Z830 has different set
points for the charging. If so, a quirk table could be introduced in the
future for this. For now, assume that all laptops that support this feature
work the same way.
Tested on a Toshiba Satellite Z830.
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Link: https://lore.kernel.org/r/20220902180037.1728546-3-lkml@vorpal.se
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This expands on the previous commit, exporting the fan RPM via hwmon.
This will look something like the following when using the "sensors"
command from lm_sensors:
toshiba_acpi_sensors-acpi-0
Adapter: ACPI interface
fan1: 0 RPM
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220902174018.1720029-3-lkml@vorpal.se
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add an acpi_video_get_backlight_type() == acpi_backlight_nvidia_wmi_ec
check. This will make nvidia-wmi-ec-backlight properly honor the user
selecting a different backlight driver through the acpi_backlight=...
kernel commandline option.
Since the auto-detect code check for nvidia-wmi-ec-backlight in
drivers/acpi/video_detect.c already checks that the WMI advertised
brightness-source is the embedded controller, this new check makes it
unnecessary for nvidia_wmi_ec_backlight_probe() to check this itself.
Suggested-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The P2SB library is used for various drivers, including server
platforms. That's why the dependency on X86_PLATFORM_DEVICES
seems superfluous.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220718145328.14374-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In some new ASUS devices, hotkey Fn+F13 is used for mic mute. If mic-mute
LED is present by checking WMI ASUS_WMI_DEVID_MICMUTE_LED, we will add a
mic-mute LED classdev, asus::micmute, in the asus-wmi driver to control
it. The binding of mic-mute LED controls will be swithched with LED
trigger.
Signed-off-by: PaddyKP_Yao <PaddyKP_Yao@asus.com>
Link: https://lore.kernel.org/r/20220711115125.2072508-1-PaddyKP_Yao@asus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On some Panasonic models the volume up/down/mute keypresses get
reported both through the Panasonic ACPI HKEY interface as well as
through the atkbd device.
Filter out the atkbd scan-codes for these to avoid reporting presses
twice.
Note normally we would leave the filtering of these to userspace by mapping
the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb.
However in this case that would cause regressions since we were filtering
the Panasonic ACPI HKEY events before, so filter these in the kernel.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com
The brightness key-presses might also get reported by the ACPI video bus,
check for this and in this case don't report the presses to avoid reporting
2 presses for a single key-press.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-6-hdegoede@redhat.com
ACER_WMI already depends on ACPI_WMI which depends on ACPI
so the "depends on ACPI" is unnecessary.
And since ACER_WMI already depends on ACPI adding an "if ACPI"
to the ACPI_VIDEO select is nonsense.
While at it also group all the selects together.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220620145628.5882-1-hdegoede@redhat.com
Currently, AMD supported platform drivers are grouped under generic "x86"
folder structure. Move the current drivers (amd-pmc and amd_hsmp) to a
separate directory. This would also mean the newer driver submissions to
pdx86 subsystem in the future will also land in AMD specific directory.
Reviewed-by: Naveen Krishna Chatradhi <NaveenKrishna.Chatradhi@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220608193212.2827257-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The def_bool y PMC_ATOM Kconfig option provides a couple of symbols used
by the code enabled by the X86_INTEL_LPSS option and it registers some
clocks. These clocks are only registered on Bay Trail, Cherry Trail and
Brasswell Intel SoCs and kernels targeting these SoCs must always have
the X86_INTEL_LPSS option enabled otherwise many things will not work.
Building the PMC_ATOM code on kernels which are not targeting the
mentioned SoCs and which do not have the X86_INTEL_LPSS enabled is
not useful.
This means that we can simplify things by replacing the PMC_ATOM Kconfig
option in Makefiles with X86_INTEL_LPSS and then drop the option.
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220503140207.101218-2-hdegoede@redhat.com
Winmate FM07 and FM07P in-vehicle computers have a row of five buttons
below the display. This module adds an input device that delivers key
events when these buttons are pressed.
Signed-off-by: Daniel Beer <daniel.beer@tirotech.co.nz>
Link: https://lore.kernel.org/r/623a110a.1c69fb81.64f39.0118@mx.google.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The recently added support for Lenovo Yoga Tablet 2 tablets uses
symbols from EFI and SPI add "depends on EFI && SPI" to the
X86_ANDROID_TABLETS Kconfig entry.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308152942.262130-1-hdegoede@redhat.com
Recent Fam19h EPYC server line of processors from AMD support system
management functionality via HSMP (Host System Management Port) interface.
The Host System Management Port (HSMP) is an interface to provide
OS-level software with access to system management functions via a
set of mailbox registers.
More details on the interface can be found in chapter
"7 Host System Management Port (HSMP)" of the following PPR
https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
This patch adds new amd_hsmp module under the drivers/platforms/x86/
which creates miscdevice with an IOCTL interface to the user space.
/dev/hsmp is for running the hsmp mailbox commands.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Nathan Fontenot <nathan.fontenot@amd.com>
Link: https://lore.kernel.org/r/20220222050501.18789-1-nchatrad@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for spi bus in serial-multi-instantiate driver
Some peripherals can have either a I2C or a SPI connection
to the host (but not both) but use the same HID for both
types. So it is not possible to use the HID to determine
whether it is I2C or SPI. The driver must check the node
to see if it contains I2cSerialBus or SpiSerialBus entries.
For backwards-compatibility with the existing nodes I2C is
checked first and if such entries are found ONLY I2C devices
are created. Since some existing nodes that were already
handled by this driver could also contain unrelated
SpiSerialBus nodes that were previously ignored, and this
preserves that behavior. If there is ever a need to handle
a node where both I2C and SPI devices must be instantiated
this can be added in future.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121172431.6876-8-sbinding@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
