Add the INT347E GPIO lookup table to the board data for the Surface
Go 3. This is necessary to allow the ov7251 IR camera to probe
properly on that platform.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230302102611.314341-1-dan.scally@ideasonboard.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add the board data describing the regulators for the Microsoft
Surface Go line's IR camera.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, we only support passing a single gpiod_lookup_table as part
of the board data for the tps68470 driver. This carries the implicit
assumption that each TPS68470 device will only support a single
sensor, which does not hold true.
Extend the code to support the possibility of multiple sensors each
having a gpiod_lookup_table, and opportunistically add the lookup
table for the Surface Go line's IR camera.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Fixes: 19d8d6e36b ("platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell")
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220216225304.53911-5-djrscally@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface Go 3 needs some board data in order to configure the
TPS68470 PMIC - add entries to the tables in tps68470_board_data.c
that define the configuration that's needed.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220106232045.41291-1-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pass tps68470_regulator_platform_data to the tps68470-regulator
MFD-cell, specifying the voltages of the various regulators and
tying the regulators to the sensor supplies so that sensors which use
the TPS68470 can find their regulators.
Since the voltages and supply connections are board-specific, this
introduces a DMI matches int3472_tps68470_board_data struct which
contains the necessary per-board info.
This per-board info also includes GPIO lookup information for the
sensor IO lines which may be connected to the tps68470 GPIOs.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-11-hdegoede@redhat.com
